TP-Link TD-W8961ND - Discussion | [Adslmodem] [wifirouter]
TP-Link TD-W8961ND - Discussion
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.
Post has been editedstp101 - 27.10.19, 23:08
- In the subject are allForum Rulesand10 commandments novice who is hard to master the Rules of the Forum
- Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
- Instead of saying “Thank you!” Use
. If you have less than 15 posts - click on the button.
under the message where they helped you, and write thanks. - Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler., Guide Networks and Equipment
A photo:
 |
 |
Description:
ADSL 2/2 + modem, wireless N access point and 4-port router in one device
IEEE 802.11n 300 Mbps wireless data transfer rate is ideal for applications that are sensitive to bandwidth or delays and signal interruptions, such as online gaming, IP telephony, and even high-definition streaming video
Easy Setup Assistant setup wizard with multi-language support allows you to quickly and easily configure the device
Easy installation of wireless protection with one touch of the WPS button and on / off wireless broadcasting by pressing the Wi-Fi On / Off button
IEEE 802.11n 300 Mbps wireless data transfer rate is ideal for applications that are sensitive to bandwidth or delays and signal interruptions, such as online gaming, IP telephony, and even high-definition streaming video
Easy Setup Assistant setup wizard with multi-language support allows you to quickly and easily configure the device
Easy installation of wireless protection with one touch of the WPS button and on / off wireless broadcasting by pressing the Wi-Fi On / Off button
Specifications:
Interface 4 ports 10/100 Mbit / s RJ45
1 RJ11 port
1 buttons on / off button power supply
1 WPS button
1 on / off button Wi-Fi
External power supply 9 VDC current / 0.85 A
IEEE IEEE 802.3, 802.3u standards
Standards ADSL Full-rate ANSI T1.413 Issue 2,
ITU-T G.992.1 (G.DMT),
ITU-T G.992.2 (G.Lite)
ITU-T G.994.1 (G.hs),
ITU-T G.995.1
ITU-T G.992.3 ADSL2 standards (G.dmt.bis),
ITU-T G.992.4 (G.lite.bis)
ADSL2 + ITU-T G.992.5 Standards
Dimensions (WxLxH) 195 x 130 x 35 mm
Antenna type Omnidirectional, removable, Reverse SMA
Antenna gain 2 x 5 dBi
PARAMETERS OF WIRELESS MODULE
Standards of wireless networks IEEE 802.11n, 802.11g, 802.11b
The frequency range (reception and transmission) 2400-2483.5 MHz
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless network protection Supports 64/128-bit WEP encryption, WPA-PSK / WPA2-PSK, wireless MAC address filtering
1 RJ11 port
1 buttons on / off button power supply
1 WPS button
1 on / off button Wi-Fi
External power supply 9 VDC current / 0.85 A
IEEE IEEE 802.3, 802.3u standards
Standards ADSL Full-rate ANSI T1.413 Issue 2,
ITU-T G.992.1 (G.DMT),
ITU-T G.992.2 (G.Lite)
ITU-T G.994.1 (G.hs),
ITU-T G.995.1
ITU-T G.992.3 ADSL2 standards (G.dmt.bis),
ITU-T G.992.4 (G.lite.bis)
ADSL2 + ITU-T G.992.5 Standards
Dimensions (WxLxH) 195 x 130 x 35 mm
Antenna type Omnidirectional, removable, Reverse SMA
Antenna gain 2 x 5 dBi
PARAMETERS OF WIRELESS MODULE
Standards of wireless networks IEEE 802.11n, 802.11g, 802.11b
The frequency range (reception and transmission) 2400-2483.5 MHz
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless network protection Supports 64/128-bit WEP encryption, WPA-PSK / WPA2-PSK, wireless MAC address filtering
Useful links:
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.
Post has been editedstp101 - 27.10.19, 23:08
Reason for editing: Dump W8961v3 version 160314
So, actually, to the problem, in general, I was tinkering with the settings, and something was nakosyachil, now the router works for 2 access points, one of which I can configure, the other where it came from, God only knows how to get rid of it? In wireless / basic you have one access point, i.e. the one that was. Please help guys!
Hello everyone, I have been tortured in this problem already
In general, such a problem appeared on a laptop after installing Windows 7, the same problem appeared on Windows 10 after updating from Windows 8.1
Wi-Fi started to just fall, and wrote that the problem was that the connection to the DNS was lost and the exclamation mark icon on the Wi-Fi was in the tray, the problem was solved by stupidly disconnecting and connecting back to the point. I tried to register ip Addresses with DNS in ipv4, but to no avail
Although at the same time everything works on other devices, the driver is the latest for Windows 7 from the Telnet site
I tried to install the old driver, the problem went away, but instead of falls, Internet friezes occurred and ping jumped up to 1500 ms 10 seconds in games and fell back
Modem: TP-Link TD-W8961ND
What could be the problem?
There are also options 802.11 b / g / n
and the biggest snag is that I only observe this problem with this Wi-Fi router, with others I have never noticed such a thing
Post has been editedDinkeway - 07.03.16, 13:57
In general, such a problem appeared on a laptop after installing Windows 7, the same problem appeared on Windows 10 after updating from Windows 8.1
Wi-Fi started to just fall, and wrote that the problem was that the connection to the DNS was lost and the exclamation mark icon on the Wi-Fi was in the tray, the problem was solved by stupidly disconnecting and connecting back to the point. I tried to register ip Addresses with DNS in ipv4, but to no avail
Although at the same time everything works on other devices, the driver is the latest for Windows 7 from the Telnet site
I tried to install the old driver, the problem went away, but instead of falls, Internet friezes occurred and ping jumped up to 1500 ms 10 seconds in games and fell back
Modem: TP-Link TD-W8961ND
What could be the problem?
 |
 |
There are also options 802.11 b / g / n
and the biggest snag is that I only observe this problem with this Wi-Fi router, with others I have never noticed such a thing
Post has been editedDinkeway - 07.03.16, 13:57
ReeKy_Bit Reset the settings to the factory settings, and then customize as before.
Or even better after reset use a quick start, it's easier to set up
Good day. Body with 2 V3 antennas. Worth the 3.0.0 build 120808 rel. 08330. I am trying to deliver the latest TD-W8961ND (RU) _V3_16031 offsite and ask the modem for me: “Error: Failed to update because of ... The downloaded file was not received by the router.
Where to dig or give pliz a link to the most recent Russian modem software.
Where to dig or give pliz a link to the most recent Russian modem software.
Good day!
In short. Moved to a new apartment. the old one was only ADSL internet, and bought a TD-W8961ND
Now I moved and had a network Internet there.
How to configure on TD-W8961ND router, that would accept the Internet from Ethernet, but not with ADSL?
In short. Moved to a new apartment. the old one was only ADSL internet, and bought a TD-W8961ND
Now I moved and had a network Internet there.
How to configure on TD-W8961ND router, that would accept the Internet from Ethernet, but not with ADSL?
There is a smart Lenovo p770 - there is a modem-route TP-Link TD-W8961ND. I want to turn on the access point on the smart and that the router strengthens it. Who knows how to do?
Hello, is it possible on tp-link TD-W8961ND to accept WIFI and forward the port to WIFI provider Rostelecom
Could anyone suggest how to limit the speed of another device so that there is no limit on the PC, and on the phone, allow 2-3mb per second. just when people connect then my ping becomes high, it's impossible to play
who has "Error: Failed to perform the update due to ... The downloaded file was not accepted by the router." Stitch in order, from the earlier version to the later
TP-Link TD-W8961ND (Post dimassskkk # 59948036)
I confirm that the router with revision V3.3 120808 rel 08330 updated to the latest 160314 after installing 140408.1550130.150707 (three firmware in series)
I confirm that the router with revision V3.3 120808 rel 08330 updated to the latest 160314 after installing 140408.1550130.150707 (three firmware in series)
Hello! Such a problem, I purchased this device instead of d-link, I have a laptop and a stationary PC, so when the laptop is turned on and I sit in nete, there are no problems, as soon as I use the stationary PC and the Internet is chopped off ip assigned to each computer. Doesn't help, what could be the problem?
The guys really need your help, I have a TD-W8968 v4 router and I need a dump from this model. Please do not offer the official website of the manufacturer as I have already been there. The problem is that I myself nakosyachil and flashed through the programmer and forgot to merge the dump. I really hope for your help. Thank you in advance!
All the good, there is this router. Use about one and a half years. All these 1.5 years, passed in agony. Constant podlagivaniya, suspension, spontaneous disconnection from different router devices connected to it, just unsettle. At the reception of DSL comes to 8.8 mb, but in real life is there and 8 does not smell. Somewhere 5.5-6 mb. The essence of what the newly connected TV warez, with plates, he works through the Internet. Accordingly, through this router. When the telly works Inet just miserable. Well, it goes without saying. This is clear. But now further increased podlagivaniya and otvalivanie Internet simply glows. Sometimes the hunt for his corner to break (unintentionally so ..).
No question, can anything be done about it? Somehow that on one TV traffic went, and on your phone. Or maybe there are some solutions? Well, from podlagivaniya.
I apply today's log.
Post has been editedQWERTCOREJZ2020 - 09.06.17, 18:08
No question, can anything be done about it? Somehow that on one TV traffic went, and on your phone. Or maybe there are some solutions? Well, from podlagivaniya.
6/9/2017 15:35:41>netMakeChannDial: err = -3000 rn_p = 804e9b30 6/9/2017 16: 7: 12>Last errorlog repeat 44 Times 6/9/2017 16: 7: 12>PPPoE: Recieve PADO 6/9/2017 16: 7: 12>Last errorlog repeat 5 Times 6/9/2017 16: 7: 12>PPPoE: Recieve PADS 6/9/2017 16: 7: 15>PPPoE: Recieve PADO 6/9/2017 16: 7: 42>Last errorlog repeat 5 Times 6/9/2017 16: 7: 42>netMakeChannDial: err = -3000 rn_p = 804e9b30 6/9/2017 16:34:48>Last errorlog repeat 106 Times 6/9/2017 16:34:48>PPPoE: Recieve PADO 6/9/2017 16:34:48>Last errorlog repeat 5 Times 6/9/2017 16:34:48>PPPoE: Recieve PADS 6/9/2017 16:34:50>netMakeChannDial: err = -3000 rn_p = 804e9b30 6/9/2017 16:47:43>Last errorlog repeat 107 Times 6/9/2017 16:47:43>PPPoE: Recieve PADO 6/9/2017 16:47:43>Last errorlog repeat 5 Times 6/9/2017 16:47:43>PPPoE: Recieve PADS 6/9/2017 16:47:43>netMakeChannDial: err = -3000 rn_p = 804e9b30 6/9/2017 16:55:58>Last errorlog repeat 47 Times 6/9/2017 16:55:58>PPPoE: Recieve PADO 6/9/2017 16:55:58>Last errorlog repeat 5 Times 6/9/2017 16:55:58>PPPoE: Recieve PADS 6/9/2017 16:57:46>netMakeChannDial: err = -3000 rn_p = 804e9b30 6/9/2017 17:42:14>Last errorlog repeat 245 Times 6/9/2017 17:42:14>PPPoE: Recieve PADO 6/9/2017 17:42:14>Last errorlog repeat 5 Times 6/9/2017 17:42:14>PPPoE: Recieve PADS 6/9/2017 17:43:39>netMakeChannDial: err = -3000 rn_p = 804e9b30
I apply today's log.
Post has been editedQWERTCOREJZ2020 - 09.06.17, 18:08
Good day, guys need help. Does anyone have a dump of 8961nd V4 or if anyone knows how to tell the firmware from the off site to convert to a dump.
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement