TP-Link Archer c20 - Discussion | [wifirouter]
. If you have less than 15 posts - click on the button.
under the message where they helped you, and write thanks.
I bought this miracle in the replacement-link 620.
Rather first took Zyxel KEENETIC LITE III and immediately returned, the rate cuts is strong.
I changed it to TP-Link Archer C20 but the result of the same ...
When the speed is below 45 620 2.4 does not fall on the same above 37 does not rise! Vibrations from 2 to 37. Sometimes even at 5 hertz switches because of signal loss. 5 hertz, too, is not gud, provides a maximum of 65 ...
From a distance, too bad.
In general, compared with the old 620 indicators worse than 2-fold.
What could be the problem? Marriage or a feature?
Rather first took Zyxel KEENETIC LITE III and immediately returned, the rate cuts is strong.
I changed it to TP-Link Archer C20 but the result of the same ...
When the speed is below 45 620 2.4 does not fall on the same above 37 does not rise! Vibrations from 2 to 37. Sometimes even at 5 hertz switches because of signal loss. 5 hertz, too, is not gud, provides a maximum of 65 ...
From a distance, too bad.
In general, compared with the old 620 indicators worse than 2-fold.
What could be the problem? Marriage or a feature?
grib007 @ 09.03.17, 10:36
then this does not rise above 37! Vibrations from 2 to 37
Exactly the same story with C2. It seems to me that ploheet him when within a radius of many networks. He surrendered back to the store. Choose not particularly out of what in this budget. I took a d-link dir825ac / g1. There are two antennas on each band. Came feast 50-70mbit / s. But on 5GHz is not yet clear.
Good evening! Bought C20, customized media service started watching a movie c android console Beelink r 89, after 9 minutes flight, the same with TV Samsung (tried movies from 1.45 GB to 15 GB) ran the first 9 minutes, and the flight (tried and external train to 1TB flash drive and 16 GB and 32) may be the reason what? Internet 100MB. Thanks in advance!!!
I have 30 minutes lg of dlna goes and hangs. You can rewind and forward an additional 30 minutes to work. Cant in the firmware of the router
vovan26_ @ 03.04.17, 20:23
There is not expected.
And this is not it?
https: //lede-project.o...k_archer_c20i_ac750_v1
vovan26_ @ 03.04.2017, 20:23
UXSET, There is not expected.
Why so bad?
Posted on 04/04/2017, 00:07:
Herzz @ 03.04.2017, 23:08
A trample? ETOGES on s20i
On the C20 have here such to V4
http: //www.tp-linkru.c...cher-C20.html#Firmware
http: //www.tp-linkru.c...cher-C20.html#Firmware
I bought this aparata. There is a problem. Stationary computer. loses connection to the internet every 2-3 hours. With wi-fi connection is not lost. It helps disconnecting and reconnecting to the wi-fi network. With the device on android no such problems. Sometimes no longer see the network at all. Helps to reboot the router (not always). Prompt who faced.[s] [I] [center] [right]
sergey21041978 Or service provider, or a bad cable, or a marriage. Post has been editedartom43800 - 26.04.17, 09:27
vovan26_, vovan26_ @ 03.04.17, 20:23
There is not expected.
TP-Link Archer C20 v1 OpenWRT v15.05
I do not try, who have the fortitude to try - do not be lazy and unsubscribe :-)
Post has been editeddampfer - 26.04.17, 15:18
artom43800 @ 26.04.2017, 09:23
sergey21041978 Or service provider, or a bad cable, or a marriage.Thanks. But with the old D-link 615 problems were only with speed. Why and I decided to change.
sergey21041978, If you can try v1 v beta firmware.http://forum.tp-linkru.ru/viewtopic.php?f=343&t=9190
sergey21041978 , Also, if you Shinda on the stationary set, which is likely, then try to update the driver, can help. Try to download the driver from of.sayte this, or any program supporting obnovit.Mogu parochku.V PM knocks here I do not want to hold them to PR
But to be honest, more inclined to think that any provider (which is not uncommon), or cable.
Hello.
Dear, please tell me how to do it?
Megaphone m150-2 be used. But because will be used Archer C20, by default it is not compatible with this router. there was already a reference to the beta firmware for the router to work with this modem, but in addition would like to receive detailed information from experienced users ...
Tomorrow I'm going out of town, and I would like to get as far as possible with as much information as possible.
Which team (if I understand correctly the AT, for this I downloaded My_Huawei_Terminal) put the modem into a megaphone "modem only" mode. Alter in haylink need a modem? And how to do it, I beg help.
Already like many read the forums, but it would be more specific if you is not too much trouble.
Thank you in advance!
Post has been editedCshapr - 11.05.17, 11:08
Dear, please tell me how to do it?
Megaphone m150-2 be used. But because will be used Archer C20, by default it is not compatible with this router. there was already a reference to the beta firmware for the router to work with this modem, but in addition would like to receive detailed information from experienced users ...
Tomorrow I'm going out of town, and I would like to get as far as possible with as much information as possible.
Which team (if I understand correctly the AT, for this I downloaded My_Huawei_Terminal) put the modem into a megaphone "modem only" mode. Alter in haylink need a modem? And how to do it, I beg help.
Already like many read the forums, but it would be more specific if you is not too much trouble.
Thank you in advance!
translate modem-only modem I was so MTS 824f (e3272s), a mts 827f (e3372s) router Tp link archer c20 v1 generally not defined it in stick had yesterday alter in haylink all directly connected even setting after 824f not changed on the router up and running
Tekstil @ 28.01.2017, 23:42 *
People, I ask for help. For the second day I’m trying to screw a megaphone 4g modem M150-2 to this router. The modem on the computer is working. When I connect to the Internet router there is no. Thanks to all.
Tekstil @ 28.01.2017, 23:42 *
People, I ask for help. For the second day I’m trying to screw a megaphone 4g modem M150-2 to this router. The modem on the computer is working. When I connect to the Internet router there is no. Thanks to all.
Post has been editedCshapr - 11.05.17, 11:08
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement