Steam Controller - Discussion | [Game] gamepad from Valve



Rep: (84)
Discussion Steam Controller
Official site |

  • In the subject are allForum Rules | Section Rules;
  • Useful topics to note:Forum FAQ | How to clean the image under the spoiler;
  • Instead of saying “Thank you!” UsePicture. If you have less than 15 posts - click on the button.Pictureunder the message where you were helped, and write thanks;
  • In the absence of the curator, the moderator fills the topic header. Use the buttonPictureon the message, which, in your opinion, you need to add to the header to contact the moderator.


For newbies
Basic instructions for launching games
1) Run Steam on behalf of the admin (optional, but I set the default launch on behalf of the admin)
2) Add a third-party game label to the Steam (the addition is carried out either from under the bigpikchi - less conveniently, or from the main Steam window (the lower left corner of the window is stim,Add game ->Add a third-party game ) - More comfortable)
2.1) Go tosteamcontrollerdb.comAnd in the search we drive in the name of the game. Copy the name that gave us the site and rename our label to it (the step is also optional if you want to try your luck with the search for community configs)
3) We start bigpicchu, look for our game and start editing presets there (main game screen, list item "Settings ", there -" Control settings ")
4) Either we search and apply the community preset, or we make our own from ready-made basic sets
5) We start the game and check if the overlay is pulled up (after starting the game, press the stim button on the pad, the overlay screen should open)

The first thing you should know is that the Steam controller will not function 100% if the stim overlay is not picked up!
- How to check whether the overlay has picked up?
+ It's simple. When you start the game through bigpicche in the game itself, you need to click on the buttonSTEAM on the joystick and the overlay screen will open

The second thing you should know about is - Pirates, who have native support for ck, will not work with it!
]
- What if I want to playgame with native support?
+ Nothing, pirates of such games are launched in the same way as pirates of simple games, you just shouldn't wait for native configs. There is a possibility that on the pirates the games with native support of the SC will simply not work, provided that the overlay clings in the normal mode. From the situation, only one way out - to buy the game. The curator of the theme of such games was only 3. ThisLeft 4 Dead 2, Portal 2, Serious Sam 3 . More such games he did not meet


Steam Controller Images
Attached Image
Attached Image
Attached Image

Features and equipment
  • 2 touch pads replacing the classic D-PAD and right stick (overview)
  • Analog Triggers with 2 Depression Levels (incomplete, full-button)
  • New system of tactile response to user actions (low-frequency sound emitters)
  • 2 extra petal buttons on the back of the device
  • Unique ergonomics

Components version of the beech
Below is the version from the BEECH, it differs from the version from Amazon only by a pair of stickers on the package and an insert with a code for 19 games from Valve. The direct equipment of the device is the same everywhere (Box, controller, 2 multilanguage brochures, USB extension cable, weighted adapter to extension cable, dongle, controller, 2 new Duracell batteries)

Attached Image
Attached Image
Attached Image
Attached Image

Attached Image
Attached Image
Attached Image
Attached Image

Attached Image
Attached Image

Forced overlay launch in games! . thank Dim0n_Dim0n
1) Open the property of the desired shortcut in Steam (Set launch parameters)
2) We enter there+ r_disableSteamOverlay 0
3) Save, run
Steam Controller and Bluetooth
Instructions for pairing IC on BT
  1. Turn off the SC
  2. We clampY and holding it click on Steam - the controller runs in Bluetooth pairing mode
  3. Turn on BT on device
  4. !!! We are going to the BT settings and there we select our IC from the list of new devices !!!
  5. After pairing, run the program on your device and follow the instructions from the device screen

Instructions for pairing the IC with the computer after pairing via BT
  1. Turn off the SC
  2. We clampBUT and holding it click on Steam - the controller starts in normal mode
  3. We start BigPikchu and in it we go to the controller settings
  4. !!! There it will be necessary to create the mate again, i.e. add new device !!!
  5. After pairing the controller will be added and will remain in the list even after the subsequent re-conjugation from the BT


List of pairing functions. thankcasper-rpk
After updating the firmware, there is a notification about the shortcut keys on the gamepad, namely:
A + Steam - the controller starts in normal mode.
X + Steam - the controller runs in pairing mode with a new usb dongle (if you lost the old one)
Y + Steam - the controller starts in Bluetooth pairing mode (it is described that a similar method of switching on is preferred for pairing with android and ios)
B + Steam - the controller is launched from the Bluetooth connection mode (as I understand, if the device is already paired with the controller, then this inclusion mode is prioritized)
Pictorial picture
Attached Image


Using SC without direct overlay in games
NEW . Thanks for the instructions Alexey594 ]
We make from SC a full-fledged gamepad.
1) Run Steam run GloSC .
2) Push Create New further three points ... choose a file GloSC.exe , we press Save .
3) Next, click Add all to Steam , and to avoid a possible endless reboot of Steam, we refuse and do a manual reboot.
4) GloSC has been added to Steam, you can download from the Gamepad template, and we launch GloSC through Big Picture .
5) You will see the inscription "Steam Community", it means the overlay works, and the system sees SC as a gamepad.
GloSC launched through the Big Picture can be closed, you need only an overlay.

When you click the Steam button, an overlay will open, set up as you like, even like a mouse.
If the game is on, it will collapse when the overlay is opened.

If the game does not respond to SC, just roll it up and open it. Either open once the overlay, and return to the game.
Something will definitely help.


Download Latest release, not Pre-release (These versions may not work at all)
https://github.com/Alia5/GloSC/releases

I used this version.https://cloud.mail.ru/public/39su/HAUk2EGFH

Screenshots for clarity
Attached Image

Attached Image
Attached Image

Attached Image

Attached Image


If GloSC does not want to run, thanksVostok-7
If the error “Error initialising ViGEm!” Appears when launching GloSC from Steam, it means that the virtual controller driver has not been installed.
Attached Image
To install it manually, click "Start", enter "PowerShell", click"Windows PowerShell" right click and select Run as administrator .

Then you need to consistently, one after another, enter several commands with copy-paste. After entering each command you need to wait for its execution (the path to the folder will appear).

Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force

Register-PSRepository -Name nuget.vigem.org -SourceLocation https://nuget.vigem.org/ -InstallationPolicy Trusted

Install-Module ViGEmManagementModule -Repository nuget.vigem.org

Add-ViGEmBusDevice

Install-ViGEmBusDeviceDriver

If everything is done correctly, the installation of the new device will begin, you will need to agree by pressingTo install .

Original instructions in Englishhere
Running Origin games on mapsAMDandNvidia
Method 1 -it is not known how up-to-date, BF1 refused to start with it
thankAlexey594for providing screenshots and links to dump the old Origin.I'm lazy ass, so I did not make my screenshots))
1 ) In the services, turn off the "amd external events utility" ( ONLY FORAMD )
2 ) We extort the old Origin client which will be suitable for this instruction
Dumps of the old origin

3 ) Unpack the Origin in the folder with the already installed, replace all the files, go into it and log in
4) Turn off the overlay in the origin settings
Attached Image


5) After login to the origin go to its settings - General
Are looking for "automatically exit Origin when you exit the game "and tick off
Attached Image

Then go to the tab "General" and then remove the check mark from "Automatically update Origin"
Attached Image


6 ) Steam run on behalf of the admin
7 ) In the incentive we add the execution file of the game
8 ) We play
The meaning of the method is that now when launching the executable file, we skip the choice of the game in the origin, and manipulating the exit from the origin after exiting the game will allow the next overlay of any game of the origin overlay to be picked up normally. The launch is a little longer, but you don’t need to suffer from shortcuts, renaming and other joys

Method 2
In the services, turn off the "amd external events utility" (ONLY FORAMD )
Add the Origin label to Steam as a third-party game and rename it to what you need (Battlefield 1, Need for Speed, etc.)
Dropping the origin if it is running
From the label on the incentive we launch the game, the origin is opened, already in it we select the game with the handles and launch it. Overlay should be picked up

Method 3. ThanksTea_Maniacfor the link
1) Downloading the extreme version of the packagehere
2) From the archive we take the executable file and throw it into the directory where we have the executable file of the game
3) Run the executable file from the archive, the exe selection window will open. This is the executable file selection window.GAMES , choose the right one (namely, games, for example Titanfall2.exe )
4) The next exe selection window will open. This is the executable file selection window.CUSTOMER LAUNCH (LONCHERA) , we select the necessary files, for example ORIGIN.EXE
5) Add a file from the archive as a third-party game to the Steam exe, rename it to the game you want to launch (for configs to pick up)
6 Optionally) An .ini settings file will be created in the folder with the file from the archive, in which case you can rustle there

SK as an Xbox 360 controller permanently.
You can not do the type of joey Xbox, and joey Xbox. A bit hemorrhoid, but the Windows will think that you have a xbox 360 gamepad.
1) Install SCPToolkithttps://github.com/nef...ses/tag/v1.6.238.16010
2) Run it and install the xbox 360 controller driver
3) Install SlimDX .NET 4.0 x86 (x86 even if you have a 64-bit system)https://slimdx.org/download.php
4) Download Xoutputhttps: //drive.google.c...9URm1scF9ueTBtRGs/view
4.1) Add Xoutput as a third-party game on Steam (Choose on the Steam Library->Add game->Add third-party game>Review, select Xoutput);
5) In the settings of the controller / control / settings for the PC, select the gamepad template as the configuration. In this case, the controller will stop working in the system as a mouse and keyboard.
6) Enable Steam Controller;
7) Run Xoutput via Steam. In Xoutput, mark the desired gamepad, click the "Start" button. The system will appear Xbox 360 Controller;
New way to search configs fromPsycho 666 NEW
To access the Community settings on pirated games, you need to change the name of the added game to its ID in Stem.
For example, pirated DOOM when added was called "DOOM Vulcan 2016", respectively, community settings were not available.
However, after renaming DOOM to "379720" (AppID DOOM in the official store) - all community settings were brought up with a bang,it helps in those cases where even after the label has been renamed correctly, community configs are not tightened
1) Add the desired label in Steam
2) Take the name of the game, drive it in on the searchthe site
3) Take out the game's AppId and paste it as the name of the desired shortcut
4) Check community settings
Solving problems with overlay Rivatuner
Method 1
If the stereos overlay does not want to cling when Rivatuner is running, then it is enough to include "Custom direct3d" in the "On" position in its settings and then there will be an overlay and on-screen monitoring, it will work even with games from Origin, if everything is done as in the instructions below

Method 2
There is also a slightly different way, I found it in the forums, but I did not check it myself, because The fix described above works for me. And so, for the "global" fix of this problem you need:
  1. Follow the path "C: \ Program Files (x86) \ RivaTuner Statistics Server \ ProfileTemplates"
  2. Find fileglobal "
  3. Open it in a text editor and find "InjectionDelayTriggers" there
  4. By default we see "InjectionDelayTriggers = IGO64.dll", we need to replace the line with the following "InjectionDelayTriggers = IGO64.dll, GameOverlayRenderer64.dll"
  5. Save, exit and restart rivk

We putPlayClaw 5and do not suffer
Over Dogs Watch Dogs 2 with EasyAntiCheat
In order to launch a pirated version of Watch Dogs 2 with an overlay in the launch parameters of the shortcut on Steam, enter this-eac_launcher .
We save, run, get a working overlay and SK
VideoGuide from user Tipulja

Using RAW configs
It often happened to me that a third-party (non-steam) game with the correct name had neither community settings, nor from the publisher + import by meansutilitiesdid not give results, the config just did not see. As a result, I found a very simple and 100% effective solution for adding third-party configs to the game.
1) Add a third-party game in the library (OPTIONAL )
2) Go tosite
3) In the search we are looking for the desired game.
4) Select the desired config, go to it by the Details button
5) Click on Download and downloadRAWFILE!!
6) Take our file and go along the path Steam \ controller_base \ templates
7) Put the file there, launch the game, then go to the layout settings and our layout appeared in the "templates"
8) Ship it, resave locally or in the cloud and that's it. We have a third-party game with a third-party config.
How to pull out your LOCAL configs
After saving the config locally, it is simply stored on the hard disk under the same name that you gave it. And you can pull out the saved config as follows:
1) Save the config locally
2) Go along the path: \ Steam \ userdata \ your_ profile_ID (you can see it openutilityon import of configs)
3) In the final profile folder, just use the search by the name we need.
Replacement rubber membrane under buttons ABYX
[Size = 2] If you, just like I have become bad bounce ABYX button, then snapped rubber membrane inside Geybpada.
It is impossible to find the original rubber, and even Valve's support by Steam Controller cannot help with this problem.

Gum from GameBoy
Attached Image

Attached Image


We cut off a small piece from the rubber band so that it does not interfere with other details of Gabpad, as follows:
Like this
Attached Image

Attached Image


And actually that's what happened) Eraser fit perfectly! (I myself did not even expect this)
Tutz)
Attached Image


Links to Aliexpress
Using SC on devices on Android.
Thanks for the instructions of the SW.150]
InstructionFOR GAMES ON Androidsmartphones with this controller:
1. InstallGamekeyboard(checked on version 5.2.0)
2. Connect the controller via a cable via an OTG adapter (for some reason, it did not work through a cable, via a wireless connector)
3. In the GameKeyboard settings:
3.1 Quick Setup / Touch Control-Joystick.
3.2 Additional settings / volume + (or another method of calling)
3.3 Internal parameters / location setting / location editing mode / tick
3.3 If the game is a shooter with an overview, then you can assign a review to the right trackpad like on a PC (in the settings: input device / use mouse / tick)
3.4 Run any text (you can go to the SMS) and select the device. input gamekeyboard
3.5 Start the game and bring up the on-screen joystick (you can use the volume +)
3.6 We drag the crossbar and 3 buttons to the right places on the screen (only they work): A, B, arrow to the left from Steam.
3.7 Click on the virtual "A" button on the virtual joystick / Input: / click on the joystick Steam Controller button A.
etc. other buttons.

By the way, the buttons are duplicated:
A = pr. trigger
B = right arrow from the button steam = lion. trigger
Left trackpad = left stick
Useful information
Catalog of press
Channel with a detailed overview of the controller and all its features
Controller parsing
Additional Russian
Excellent analysis of the IC and its software
List of games with native support for the UK
Quick battery removal!
The controller has a very simple and straightforward way to remove the batteries. No need electrical tape and other things. The photo below shows the levers that you need to push upwards (into the case) and then the battery will come out of the slot itself. I repeat, THIS IS NOT THE BUTTONS OF PETALS, THIS IS A SPECIAL-LEVER FOR REMOVING THE BATTERIES !, the places where the yellow arrow points to the photo are the places where the petals are pressed, i.e. Buttons hidden under stickers. Red arrow shows WALKER lever and FORCED battery blue arrow - DEFAULT lever position and INSTALLED battery
Attached Image

Information about the nature of the SC - thanksArnovichfor information
Native support
Under the link - the list of gamesNative support(games with native support for SC at the API level) and Official Bindings (games for which there are official developer binds, but these binds emulate other joysticks).

With Native Support, the joystick detects different game states. Bookmarks, as in the screenshots above, are activated independently.
Example - For Honor, for which there are three tabs - the menu, the movement outside the protective rack and the movement in the protective rack. In the bookmarks - different buttons, everything switches automatically.

Official Bindings can create bookmarks yourself (or they are in binde), but switching of bookmarks will occur at the touch of a button.
An example is GTA 5, for which I configured the "out of transport" and "transport" tabs. Switching - on the Y button, on which landing in transport is hammered. That is, getting into the transport, at the same time changing the layout.
Gyro drift problems
There are cases when the gyroscope starts to move in different directions, because Movement on the screen occurs without moving the joystick, this is called drift. There are several fixes.
1) Calibrate the device through the menu Steam
2) Perform auto calibration as follows
For not understanding ang. Turn on the gyroscope on the constant. Put on a flat surface, wait for some time.
Tricks with working in the system
There are some keyboard shortcuts that work in the system anywhere, in any application, and with any overlays. You can configure / view default combinations:
1) Enable Steam in bigpicche
2) Controller go to "Settings" ->"Basic settings" ->"Settings with the Steam button held down"
Very convenient, i.e. gives additional control over the system
The revitalization of the stimulator (manual firmware upgrade and rollback)
Instructions in English

Covers
Presheti (RAW + Import Configs
Because The forum does not allow to load the original file extension had to be bogged down. What would the config you download become a RAW file to remove from its name.rar . After that, you can work with RAW configs according to the instructions from the spoiler above.
Example:
It was - Battlefield 4 full config with layouts.vdf.rar
It became - Battlefield 4 full config with layouts.vdf


Attached filebattlefield 1.vdf.rar(19.09 KB)

Attached fileBattlefield 1 - MP.vdf.rar(14.16 KB)

Attached fileBattlefield 4 full config with layouts.vdf.rar(57.22 KB)

Attached filekilling floor 2 with gyro and fast chang.vdf.rar(9.17 KB)

Attached fileS.T.A.L.K.E.R Shadow of Chernobyl.vdf.rar(9.33 KB)

Attached files.t.a.l.k.e.r call of pripyat.vdf.rar(14.03 KB)

Attached filePURE with bind spetstryukov.vdf.rar(12.89 KB)

Attached filewatch dogs 2 + car presset.vdf.rar(23.86 KB)

Attached fileResident Evil 7.vdf.rar(7.15 KB)

Attached filewarface finalized.vdf.rar(14.73 KB)


Warfare Press Supplement
File in the archive .Vot vrodi signed all but there is one thing. Since the game can not be started with an overlay of steam due to the fact that the game is run from the game mail center settings to do (big Picchu-setting-key configuration settings for the PC) as well as to avoid getting off the couch to click Alt-Tab to switch to desktop (I switch to change the track to radio Yandex and for all the rest of the non-game) you want to assign the key while holding down the steam (I have it so we press the button steam right click on the trackpad and press the right trigger). Who does not know much about the need to understand where that tyazhkovato nahoditsya.tam there are buttons that are running activators such as long press and double-click), and performs one button several actions. If you go ahead, I'll create a text file whose name ends with a description of all. Gyro On the trackpad on the right at the right of the trackpad pritselevanii Sens decreases when you tap the left trigger and shoot without sight in the game you want to install (squatting takes place on holding the button). Something like this! If that will write describing everything that has been done. I can say that is not assigned to the button for the fourth pockets for grenades can be assigned to the left trackpad but are uncomfortable with it in a shooter to play so I have it empty. The sensitivity of the trackpad and the gyroscope twirled by itself, if someone will use my pressetom something to play PVP reconfigure the left trigger settings on the (slow double Triger or plain double Triger) so it will shoot without aiming much faster is if the assault and honey play . If you play with a shotgun for the honey it is also possible to configure the left trigger (when placing repeat clamping the left mouse button to shoot itself will not yet release the trigger), though it will work with other classes.

Attached fileTom Clancy's The Division (denika) .vdf.rar(16.5 KB)
fromFleshkill

Feedback from users of the topic
BEHIND



Minuses:
- Already very long Valve updates it, a lot of shoals of all kinds. (For example, in saving settings that seem to fix, but generate new jambs)
- Some features are clearly not finalized. Sometimes for complete freedom of settings, some point is missing.

BEHIND !
Fleshkill]

VS
User Videos


STEAM LINK
Official site |
SteamLink supports connection to itself as SC (without dongle), and third-party gamepads, working on technologyBluetooth


Steamlink images
Attached Image
Attached Image


Completion and technical characteristics
Official multilanguage community of devices
Brief characteristics
  • 1080p resolution at 60 frames per second
  • Network connectivity support: wired up to 100 Mbit / s and wireless 802.11ac 2x2 (MIMO)
  • Three USB 2.0 ports
  • Native Wireless Steam Controller Support
  • Bluetooth 4.0
  • HDMI output
  • Supports Steam Controller (sold separately), Xbox One and Xbox 360 wired controllers, Xbox 360 wireless controller for Windows, Logitech F710 wireless controller, and mouse and keyboard

Equipment
  • Steam link
  • Power Adapter and Cable
  • HDMI 2.0 cable
  • Ethernet cable

Requirements
  • Computer running SteamOS, or with Steam Big Picture mode on Windows Vista or higher, Mac OS X 10.10 (Yosemite) or higher, Linux Ubuntu 12.04 or higher.
  • 720p or 1080p TV
  • Any of the above input devices
  • Connection in the home network for Steam Link and for a computer with Steam


Instructions
Installing RetroArch and Kodi Home Media Center fromumarcheh
Installation instructions for the Steam Link emulator of old RetroArch game consoles and Kodi home media center

What is it all about and why is it needed?
RetroArch is a collection of emulators neatly packaged in one application. With it you can run games for consoles Nintendo 64, NES, PlayStation 1, SEGA and others, the application allows you to work on the basis of the Libretro API with a huge number of emulators. Libretro is a wrapper for all popular emulators. More than 40 emulator cores have been ported for Libretro, many of which are only part of RetroArch.

Kodi (formerly XBMC) - a free cross-platform media player and software for HTPC organization of open source. The graphical user interface allows you to easily manage video files, photos and music from that computer, optical disk, the Internet or a local network. It can be controlled using the remote control. A popular alternative to Windows Media Center from Microsoft and Front Row from Apple. Kodi supports custom plugins and themes. Kodi originally created as a media center application for the first-generation Xbox. But now it supports Linux, OS X (Snow Leopard, Leopard, Tiger, Apple TV), Apple iOS, Windows, Android and Raspberry Pi. Prior to version 14, the project was called XBMC (from the Xbox Media Center).

Proceed to install


First you need to install USBMount - this is a very small application, which is essentially just a script that mounts plug USB flash drives to Steam Link
Installation:
Downloadfrom hereUSBMount archive, unzip the contents to the root of the flash drive (the flash drive must be in fat32), pull the power cord out of the link, stick the flash drive, stick the power cord and turn on the link, the USBMount icon will appear in the link menu, remove the USBMount installer from it, it on the flash drive is no longer needed

RetroArch swing for thisreference
Installation is similar to USBMount.
copy folders from the archive to the root of the flash drive (the flash drive must be in fat32), pull the power cord out of the link, stick the flash drive, stick the power cord and turn on the link, RetroArch will be installed and the icon will appear in the link menu, pull out the flash drive and remove itonly installer RetroArch located on the steamlink / apps / path retroarch.tgz folder RetroArch on a flash drive do not touch .

Running games, first you need to download the Roma for examplefrom hereI will describe how I did it: on the flash drive with which I installed the retroarch in the RetroArch folder I created the Roms folder and threw in the Roma there, then pull out the power cord from the link, insert the USB flash drive, insert the power cord and turn on the link, first we press the USBMount icon something similar happens On the fast link reboot (the screen will flash black), only after that we start RetroArch, select the emulator core and the rum of the game. At the moment, RetroArch is an enthusiast port and many kernels are not supported.
list of supported kernels
fbalpha2012, fceumm, gambatte, genesis plus gx, mednafen, pce fast, mgba, nestopia, nxengine, pcs x rearmed, picodrive, prboom, snes9x 2002, stella
also, the author strongly does not recommend using the online kernel update (Core Updater), but has nothing against updating the Update Core Info Files, Update Assets, Update Databases parameters. The official blog of RetroArch developers claims to support Steam Link in the next versions.

Install Kodi:
download archivekodi-17.5-2017-10-23.tgz, put on a USB flash drive along the steamlink / apps path the flash drive should naturally be in FAT32, pull out the power cord from the link, plug in the USB flash drive, plug in the power cord, start the link, install Kodi and the icon will appear in the link menu, you can use Kodi, and remove it from the flash drive installer

Kodi supports the Russian language, you can turn it on in the settings, as an experiment I installed the YouTube addon, connected via dlna to the computer's media data and viewed them, downloaded alternative covers and much more, everything worked without complaints. If you want to view media data from a connected USB flash drive via Kodi, do not forget to mount it first via USBMount, the media data on the USB flash drive must be arranged in folders.

Polls
Attached Image



There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedmihadom - 29.01.20, 10:56
Reason for editing: Gamepad package



Rep: (2)
Have you tried to steal for android?



Rep: (71)
I have not tried. I don’t have any interest in this, I don’t play toys on my devices, and they’re also not likely to get old novelties. if there is no laziness at the weekend, I’ll connect it. on the Internet they say that when connected through a wire, they work like a mouse and keyboard.



Rep: (84)
Is the vibration gorgeous? how linear vibromotors manifest themselves and the feeling of them after 360



Rep: (71)
Eleman @ 12.21.2015, 11:59*
Is the vibration gorgeous? how linear vibromotors manifest themselves and the feeling of them after 360

no power. local motors are purely for organizing tactile feedback; they crack more than vibrate. metaphorically speaking, vibration x360 = Soviet washing machine, vibration SK = vibration during the operation of relatively modern refrigerators.



Rep: (84)
And what is generally noticeable brought fresh firmware?



Rep: (71)
The latest firmware allowed to bind the controller configurations to the account. before that, all configurations were stored on the computer and, accordingly, if you go somewhere, the controller had to be reconfigured in a new place.
before that they added music to turn the controller on and off (inside the controller there is a simple speaker for 8 tones (or sort of).
before that we added the mouse region function - when you say you touch the right-upper corner of the touchpad, the mouse cursor "jumps" to the right-upper corner of the screen.
but basically Steam updates fix bugs.



Rep: (84)
Wow believed that the controller settings are stored in his memory. That is, you can’t set the gamepad mode in the default profile at home, go to a friend where there is no Steam at all and play the game from the shortcut on the desktop?



Rep: (71)
after some time of use, it began to strain that the controller can only be configured in big picchr mode. In classic desktop mode, you cannot configure it in any way, and, taking into account, firstly, the unusualness of the big picchr interface, and secondly, that the big picchr + controller bundle can randomly paint over in the middle of the game, I want them to stop pushing the big picchu and make a simple menu for controller settings in desktop mode.



Rep: (14)
Have you tried to steal for android?

This thing is not that without Steam, it even without big picchur does not work.



Rep: (71)
This thing is not that without Steam, it even without big picchur does not work.

not. everything is working.



Rep: (14)
It only works in big pic.



Rep: (71)
no idea. for me, and for the main part of the Internet, a controller without a stim turned on generally works like a mouse and partly a keyboard; when a steam is turned on without a big picchra, it works in the presets that were specified in the settings.
try to set the button in the desktop configuration settings.



Rep: (7)
Hello everyone and Happy New Year. Today I took my SK. Since at work, I simply inserted the batteries and turned it on. But immediately appeared as if a crack on the left trackpad. And when I simply divided it to a computer, without, the Steam cursor jumps like abnormal (
Ordered on ibey, Almost new, opened and launched only once. Tell me, did anyone have this?



Rep: (14)
This is not a crack, it is such a gamepad "vibration".

Post has been editedsm1tty - 01.01.16, 04:53



Rep: (84)
If you want to exchange for the Xbox 360 gamepad with a loplat, in hp



Rep: (71)
Connected to the tablet through the adapter, the controller works like a mouse. Android still determines the keyboard, but I pushed all the buttons, nothing is entered.



Rep: (84)
* semencmoz
What default profile is installed? Try to set the default gamepad



Rep: (71)
profiles only work with Steam enabled. without steam, it always works like a mouse. at least mine.

Post has been editedsemencmoz - 07.01.16, 01:36



Rep: (0)
And how does he work with non-Steam games? I assume that in one of the following scenarios:
1) turned on Steam, configured, play non-Steam games (is it possible to close Steam at the same time?)
2) added the game as a third-party, configured, play
3) it works depending on which mode is set to default (as a controller or as a mouse + keyboard)

P.S. Why am I asking this when there were posts on this topic in the topic? Because the information is contradictory (both on this forum and from other sources), besides, there was this message:

news

Valve is preparing a Steam controller update
The Steam controller is already available to everyone for about a month, so that when studying the capabilities of the device, gamers even discovered what Valve had not planned. The company shared information regarding the future update of the controller, as well as the hidden features of the device. For example, the giro-tracking system can be used simultaneously with the trackpad for even more accurate aiming.

In addition, the "mouse region" feature has already been introduced, which is designed for games with a mass menu, allowing the player to reconfigure the trackpad based on what the player is doing. For example, if one of the buttons is clamped, the left trackpad is responsible for controlling the mini-map, so that it becomes much easier to move the camera around the map. In addition, a customizable touch menu has been added, allowing up to 16 buttons to be located from the keyboard on the controller.

In the future, the ability to activate your own controller settings on any machine will be introduced - useful if you are playing with a friend. Support for non-Steam games will also be introduced, while configurations can also be shared for the community.
En
Conveyor


Has the update already arrived? If so, what has changed?

Post has been editedgeek0395 - 17.01.16, 23:58



Rep: (84)
* geek0395,
I do not have this pad. do not know. They do not respond to the regional announcement


Full version    

Help     rules

Time is now: 22/07/20, 19:03