WeTek Play [Android] | [TV Box] [DVB-S2 / T / T2 / C] [AML-8726 MX]
Firmware
What firmware do you use on your Wetek.Play as the main one?
Android (official firmware) [ 69 ] ** [47,92%]
OpeneELEC | LibreELEC [ 43 ] ** [29,86%]
Firmware based on Enigma [ 24 ] ** [16,67%]
Experimental based on Android [ 1 ] ** [0,69%]
This, that, that ... [ 6 ] ** [4,17%]
Are you satisfied with your Wetek.Play?
No (hangs / dulls / overheats / leaves at night to smoke ...) [ 26 ] ** [18,06%]
Yes with reservations (everything works, but there are minor problems) [ 89 ] ** [61,81%]
Yes, unconditionally [ 29 ] ** [20,14%]
Total votes: 144
 



Rep: (16)
Discussion Оћ WETEK Play
PictureTv box
Discussion пїЅ
  • To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison
  • Before posting photos, read the topic Working with Images on the forum
  • Messages about w @ ring, prices for w @ ring, with links to w @ ring-offices, etc. deleted without warning
  • The topic is intended to discuss WeTek Play (not Wetek Play 2, etc.) in the configuration in which it is presented in the header. [пїЅ]Discussion of new products / similar / rumors from the manufacturer - offtop! Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
Specifications
Attached Image

Products webpage | Official forum
Detailed specifications -Attached filewetek_basic.pdf(189.1 KB)
  • Processor (CPU):AMLogic AML-8726 MX Cortex A9 (1.5 GHz Dual Core) @ GPU Mali MP400 (Dual Core)
  • RAM:1GB DDR III
  • Main memory:4 GB NAND + 1 microSD slot (up to 32 GB)
  • Tuner:DVB-S2 (satellite tv) or DVB-C / DVB-T / DVB-T2 (cable / digital tv)
    Note: you can purchase both tuners -they change easily.
  • Video output: HDMI, AV (CVBS + R / L audio)
  • Audio output: HDMI, AV and optical S / PDIF
  • Data Transfer: 10 / 100M Ethernet, 802.11 b / g / n Wi-Fi and Bluetooth 4.0 (AP6210)
  • USB ports: 3 external USB 2.0 + 2 internal USB 2.0
  • Miscellaneous: IR receiver, 3 LED for power, Ethernet, Wi-Fi, RS-232 for serial port.
  • Power supply: 12V / 1.5A
Support for AirPlay, Kodi (XBMC) and Torrent TV, the ability to connect an external keyboard, mouse, HDD and other USB devices
Support for W @ ry protocols CCCAM, Newcamd and Biss keys (version with DVB-S2 tuner)
Russian language support + 24 others
Equipment Instructions, RCA cable, Remote Control, HDMI cable, Power supply 220v
Complete set (image)
Attached Image
Dimensions (image)
Attached Image
A photo
Attached Image
Attached Image

Attached Image
Attached Image

Attached Image
Video
Firmware
Useful

Send all questions and suggestions on filling topic capsin QMS curator.
Statistics of user posts in the topic


Post has been editedBEST.RAFER - 21.11.17, 11:10
Reason for editing: Cosmetic changes ...



Rep: (0)
Good mood.
Set OpenElec, does it can change the wi-fi point. See see but the system does not prompt for a password.
Strongly do not scold me, what LNB- need to connect satellite cable?



Rep: (2)
guffikaa @ 21.06.2015, 21:38*
Set OpenElec, does it can change the wi-fi point. See see but the system does not prompt for a password.

Which version OpenELEC?
guffikaa @ 21.06.2015, 21:38*
Strongly do not scold me, what LNB- need to connect satellite cable?

That which is farthest from the right edge (in this adapter0 tvheadend).



Rep: (142)
18504 @ 21.06.2015, 22:08 *
like Wetek things with HDMI-CEC

my Wetek as OpenElec and the droids easily controlled by the TV remote control Sony h800. But the TV is switched off only the droid, but turns the TV on both systems.



Rep: (0)
codesnake @ 21.06.2015, 22:43*
(This adapter0 in tvheadend)

Which version OpenELEC

It turns out that it is LNB 1

OpenELEC 5.95



Rep: (142)
guffikaa @ 21.06.2015, 22:58*
It turns out that it is LNB 1

Attached Image

________________________________________________________


Gentleman's setfor WeTek Play

Post has been editedGuRuLviv - 21.06.15, 23:26



Rep: (2)
OpenATV 5.0 Enigma 2 BETA image WeTek Play

OpenATV 5.0 Enigma 2 BETA Download


This image of Enigma 2 for SD-cards. You can record it using Win32DiskImager

Attached files

Attached fileopenATV Wetek RCU Mappings.pdf(66.4 KB)


Post has been editedTopichTV - 22.06.15, 01:37



Rep: (0)
* GuRuLviv, --- Thanks.
Good day.
I am trying to make it work a miracle with a companion but still dull as in the tank (tanker stupid).
I have no Diseko
tune both pictures (two choose suitable)
https://gomel-sat.net/...dex.php?showtopic=1920
or
http: //www.alexelec.ru...eadend-versii-3-9-xxx/
Although these instructions are a little bit old (both the interface and functional location), I can not understand where prescribed "Cirlular 10750" and whether it is necessary to register.
At the moment, in my logs is such a picture
015-06-22 08: 15: 14.309 mpegts: 11785R in 36E - tuning on Availink AVL6211 + AV2011 DVB-S / S2: DVB-S # 0
06/22/2015 08: 15: 14.332 subscription: 0004: "scan" subscribing to mux "11785R", weight: 6, adapter: "Availink AVL6211 + AV2011 DVB-S / S2: DVB-S # 0", network: "36E", service: "Raw PID Subscription"
22/06/2015 08: 15: 24.001 mpegts: 11785R in 36E - scan no data, failed
22/06/2015 08: 15: 24.001 subscription: 0004: "scan" unsubscribing

Post has been editedguffikaa - 22.06.15, 08:22



Rep: (174)
TopichTV @ 22.06.2015, 01:35*
OpenATV 5.0 Enigma 2 BETA image WeTek Play

Thank. We'll see.
I drove alpha PBnigma, what to say, even though I am skeptical until Enigma to work on the arm, and have done a great enigma to Wetek will.
The satellite scans, the emulator works online update even takes place, the channels are switched Well, not slower than Solo2, and the interface itself is faster. It is evident, of course, that the alpha but the fact that there is already impressive.



Rep: (142)
guffikaa @ 22.06.2015, 08:21*
I can not understand where the prescribed "Cirlular 10750"

It should definitely, without this 36e is not caught. In the future please describe your problem in more detail. Soft, satellite (for this issue), and so on for the full-time psychic on vacation and it is difficult to build a response to a loss. If one head is all the same except for the number of positions and switching.

Here is the video settingsWeTek Play on NTV Plus with Eutelsat 36A / 36B at a frequency of 36.0 В° Efor Androyd.
And here's the videoHTS Tvheadend Setup \ ConfigureOpenELEC

Post has been editedGuRuLviv - 22.06.15, 09:37



Rep: (56)
* Ghans,
While not particularly useful. Can. With the guarantee of all the questions to the manufacturer. It sells only locally.



Rep: (0)
* GuRuLviv, -: thank_you: Thank you. I will try in the evening.

There is another question: OpenELEC 5.95 - set up in the country, there is a wifi (him perfectly connected), brought home, the device sees a home wifi but does not allow to enter the password.
How to cure it?



Rep: (0)
GuRuLviv @ 22.06.2015, 09:30*
And here's a video HTS Tvheadend Setup \ Configure OpenELEC

I do everything in a movie. The roller 4 mesh satellite through Diseko.
In my case: I Diseko no direct engaged to the head. As specified in (sm.kartinku). If you put 1, then that register in Switch: Genetic
Samehttp://192.168.1.19:9981/extjs.html?#in the About tab
HTS Tvheadend 0.0.0 ~ unknown . It seems to me that this is not normal.

Help the p-ta. : Angry:

Attached images
Attached Image


Post has been editedguffikaa - 22.06.15, 20:20



Rep: (142)
* guffikaa, the default values!
I only OrbitalPozishon by 1. Everything else, do not touch in this menu item. that in the picture.
And a switch, too, do not touch. Mute it.
All About 0.0.0 ~ unknown - the norm, meaning the latest version.

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Build: 0.0.0 ~ unknown


Post has been editedGuRuLviv - 22.06.15, 20:27



Rep: (0)
* GuRuLviv, - Thank you, something seemed.
If you are not difficult to give an n-link as the one set up oscam, but what I found old and does not work for me.

Maybe you can vlest to put a piece of iron and konf.fayl?



Rep: (142)
guffikaa @ 22.06.2015, 22:53*
Maybe you can vlest to put a piece of iron and konf.fayl?

Yes.
1. Web interface!http: // wetek_ip: 8888login and password oscam
2. Access to the configuration file for the network: \\ openelec \ userdata \ addon_data \ services.softcam.oscam \ config \
3. ssh and sftp logs root pass openelec

Screen settings TVhendid have higher Oskam except balloons data, pay attention to this:
Attached Image


Post has been editedGuRuLviv - 22.06.15, 23:28



Rep: (0)
GuRuLviv @ 21.06.2015, 12:14*
- Thanks for the help. I will try in the evening.
Question:
you can make the setting that you were attached and then put a oscam.server from your post

GuRuLviv @ 19.06.2015, 09:45*

specifying its parameters, or this option is not a ride.

I set up here on this a manualhttp://hdbox.ws/amlogi...hitrogo-prosmotra.html
nothing succeeded.

Post has been editedguffikaa - 23.06.15, 11:27



Rep: (142)
* guffikaa,
It is running this way and that.



Rep: (24)
* LordMerlin,
I ordered a new one. Netselovany. But thank you all Rasna



Rep: (142)
For those who suffer onEnigma2 on WeTek Play :
  1. Update on 23/06/2015enigma 2 OpenATV 5.0
  2. enigma2-plugin-softcams-wicardd_1.18_cortexa9hf-vfp-neon
  3. Attached Image

  4. Eutelsat 36 В° East channel listEnigma2_Channel list_36E_ (02.06.2015)


Post has been edited-SunLion- - 25.08.15, 20:47
Reason for editing: In the header



Rep: (139)
With the latest build of Development (June) on Android is not friendly Dreamset 2.44 Beta7
Test Connect goes normally. Drain from the device is obtained. And if you download to the device, WeTheater quietly takes off immediately after starting. It helps restart devaysa, but in the channel list there are no changes. On May build, there were no problems.
I tried and stored in the backup with Dreamset'om May build and re-made in June - a hell.
I feel, in the case of some permishenah.

In general, Dreamset still alive? And that his site does not open.


Full version    

Help     rules

Time is now: 26/07/20, 21:04