> Attention!

Creating topics in this section is not available. If you haven't found a discussion of your problem in this section, you can create a topic inmain section.



FAQ on some popular issues | Here the public is ready to solve the problems



Rep: (403)
FAQ on some popular issues
This topic contains ready-made solutions to popular problems.


Content
Theme Rules
  • There is no discussion in this topic, no consultations are being held - only ready-made solutions are laid out here.
  • If you have a problem with an iOS device, and you were able to solve it, but for a full-fledged FAQ there is not enough information or no desire to do it - you can write here a brief instruction on the solution. Messages with solutions from other topics will also be transferred here.
  • To facilitate the search for a topic, you can add "tags" that describe the problem.
  • Authors of the developed and clear decisions are awarded plus in reputation.

All suggestions on the topic and the cap, write to me inQMS.

Post has been editedHoRRicH - 29.01.20, 17:58
Reason for editing: editing the header



Rep: (1137)
Problems with applications.

Attached Image

Any problems with the system - from closing applications when starting up and throwing out on a springboard to completely killing the system, restarting or freezing ios

General conditions of any software problems:
- the application does not fit the firmware version;
- the application does not fit the version of jail (flashing will not save);
- the application initially has errors in the program code ("curve" release);
- applications occasionally crash due to memory overflow (thisconsidered normal if there are games in the background, social networks, a browser with a large number of tabs, etc. and etc.);
- applications are unloaded / lost / buggy, the system reboots / hangs due to any operating system malfunction, application / tweak conflicts with each other, "death" or a memory defect, the processor and any other components

From a couple of words: persistentlynotI advise you to use the tweak retinapad, siriport and the like, as well as the icleaner program

Possible solutions.
Existing Outcomes
===========
If adevice without hacking , then there are five treatment options:
- reboot (for any problems: system, and software, and any others);
- reinstalling a buggy application if one thing does not work (system applications cannot be reinstalled);
- removal of the latest installed applications (if the problem appeared after the recent installation of applications in the system) one by one before the problem disappears;
- reset to factory settings;
- flashing the device and setting up from scratchwithout restoring backup .
Nothing more can be done
===========

===========
If adevice burglary then there are more options than without hacking:
- reboot (for any problems: system, and software, and any others);
- reinstalling a buggy application if one thing does not work (system applications can betry to recover);
- transfer device tosafe mode- The most effective way to deal with the problem (all tweaks in this mode will be turned off);*
- deleting the latest installed applications / tweaks (if the problem appeared after the recent installation of applications / tweaks into the system) one by one until the problem disappears;
- remove all tweaks (hacking and cydia remain) and reset the device to factory settingsby thisorby thisin the ways (on ios7 did not test);**
- removal of hacking with firmware upgradewithout restoring backup (lost hacking and unlock).
Nothing more can be done
!!
Reset to factory settingsnotdo
Flashing or resetting tweaksnotdo on locked devices
===========

Total.
1. If the application does not start after all the done options, then accept and delete it
2. If other global problems occur (multiple and constant application crashes, endless reboots and glitches) evenon a clean device after flashing, the direct road to the repair service

*In safe mode, applications should start and work, and if they do not work, then they are not suitable either for firmware, or for a device version, or there are some problems with the release of the program, or a system failure has occurred - just upgrade from scratch, configure as new without backup restore
If this does not save, then there are problems with the hardware of the device - RAM or processor
If the device goes into safe mode itself, then try to figure out when this happens.
Examples: safe mode when calling the phone - dig tweaks associated with the telephone part; the appearance of safe mode when you call the taskbar - dig tweaks associated with the taskbar .. and so on and so on
**It can cause various problems with the system - you do everything at your own peril and risk



Post has been editedMadfile - 27.05.14, 17:26
Reason for editing: info added



Rep: (1137)
Error -1 - modem problem

Origin of the problem:
- marriage in the production, assembly (may not occur immediately);
- mechanical damage (shock, wet, etc.);
- Simcard curve (trim, stump);
- developed modem resource;
- unlock, a large number of kickbacks, flashing, downs / raises / stops of modem versions;
- voltage drop, computer shutdown, usb cord pulling out or other effects during device flashing

Very much this problem lately.
If it doesn't help outrecoveryNo flashing, then the death of the modem has come - we carry it to the service

Error -1
iphone 5 error -1
error -1 with firmware. There is no modem.

Apple support
Try restoring your iOS device two more times. If the problem persists, the device may need to be serviced.

http://support.apple.com/kb/TS3694?viewloc...le=ru_RU#error1

ps
From experience.
1-2 times out of 1000 it turned out for no reason at all to flash after this error, but this is the last sigh of the device - very soon the device hung with the apple and when reflashing the error -1 didn’t allow anything at all
There are still cases where it turned out to get out of error -1, but the modem did not work - there will be an ipod (often with glitches)
The verdict in these cases, one - in service

Post has been editedMadfile - 14.09.13, 12:45
Reason for editing: done



Rep: (1137)
Addition to the questionbattery problems .
Attached Image

At the forum there is a huge mountain of information on this issue, but again and again there are topics.

We are aware of everything in steps.
Appearance .
So, the new topic is “battery is eating a lot” and in the description there is minimal information describing the problem, several suggestions like “for no reason at all has the battery been consumed .. help”

In your hands is your personal device, which no one on the forum has seen and can know about what happened and happened in his life, namely, how the zhor began:
- what has been established;
- whether the firmware or sim card was changed in the device;
- when zhor is manifested - constantly or sometimes;
- whether the Internet is on or hang in the background of games / movies / music / social networks and others;
- what is the age of the battery itself;
- how the device is operated;
... etc.
Information for review
Steps to Awareness .
Of course, at first, there was no such discharge, but since that time a large number of peaceful bytes were sacrificed in the device’s RAM and a hell of hungry applications were installed - the processor has become much more difficult to live and a large expense comes from
Separately, you can say aboutnew firmware .. when a new device goes under it, the firmware is sharpened, but when the next new firmware comes out with the same technical data of the same device, it starts lags, brakes, battery packs, etc., because in new firmware there are always a large number of innovations and upgrades
In turn, this new firmware is being sharpened and a new device is being released with an increased battery, RAM, and an improved processor - it all works tolerably and better than previous devices, but becomes obsolete again in the next generation of firmware

Also, do not forget that components over time come into disrepair, lose their properties, produce their useful life, are exposed to imperceptible physical effects (damp, frost, etc.) or have a hidden marriage that can crawl through the day, week, month
Also affects the constant use of non-original power supplies, wires, car chargers, wires from other models of devices, etc. and etc. -do not use unoriginal

All of the above invisible to the user leads the device to repair
In this case there will be various inadequate symptoms: the charge lasts for several hours; jumps sharply through dozens (50 -> 20, 70 -> 30, 40 ->90, etc.); the device is heated; turns off, for example, at 40% or any other positive figure; The device does not charge, does not turn on, etc., and TP - clear symptoms of a battery / controller killing

About zhor - step by step
Step 1. Forget about paranoia - it may well be that there is no zhora, and discharging a battery by 2-4% overnight is standard, because the device, even in its dormant state, consumes energy to maintain its state and store all the information it contains
Zhor 10% per night when social networks, the Internet and etc. are included, is normal and standard for such a device ..
40-80% zhor in 5-8 hours with 3G, gps, youtube and others like it, social networks, chat rooms, icq, constantly on screen, playing games / movies is also normal and standard behavior.
Zhor 100% per day is absolutely normal under the conditions listed above.
It's time to understand and come to terms with that. what's in your hands is not a Nokia 1112, but a highly gluttonous, problem and sophisticated device, for which close monitoring is needed

Step 2. Deal yourself first with your device - reduce the screen brightness, reboot, shutdown running processes, shutting down gps / internet (especially 3G), geolocation and other connections, shutting down social networks, updates, notifications, etc.
Remember which program (or tweak when hacked) was installed last or one of the last - try to remove it all
After that, watch the battery life

Step 3. Examine the search in the forum or the Internet - an exampleon the forumexamplein the Internet

Step 4. Reflash the device,set up as new without restoring backup
It is advisable not to install anything and not even turn on the Internet, and if it still turns on, then watch the battery discharge and the device temperature.
In this mode, observe for 12-72 hours and if the discharge is normal, then the problem is in use, not in the device
If the charge was normally kept on an empty device, but the hellish zhor began after installing programs, turning on the Internet (especially 3G) and so on and so forth, then the conclusion is not difficult - the device user is to blame, not the device itself
If the discharge is huge on an empty device (10-40% per night), then carry a service to test or replace the battery / controller

Awareness .
Suchstandard issues it is always easier and more important to defeat the problem yourself, and not to create on the forum the same topics that will be ignored by people who have explained the solution of the problem a billion times over many years .. the maximum you get in return are links from a search or copy-paste of standard steps and actions from a notebook

Little materiel about the life of Akum
I will write down one of the points of view that has never failed and is based on many years of experience in owning and supporting apple
Akum is designed for the period of ownership of the device .. the lion’s share of the people is not going to use the device for all their life and quietly lives on this Akum for 2-3 years .. you can charge it anytime and as much as you want
In order for Akum to feel normal, there are a couple of minor conditions:
- need toat the first days of use a couple of times to discharge the Akum to 8-10% and charge up to 100% without pauses and stops;
- need tocharge a full cycle - from 8-10% to 100% without stopping at least 4-5 times a year;
- cancharge by incomplete cycle - as you like, whenever you want and as long as you like;
- not desirablefor a long time to keep the device on charge after reaching 100% (very flimsy controller);
- can'tconstantly drop the charge at 0% (this is important!)* ;
- can'tconstantly turn off the device completely** .. let it always be turned on even if rarely used

Some laws
Within 14 days you can exchange defective device
For this we read OZPP st.18
In the case of a technically complex product, the consumer, in the event of deficiencies in it, has the right to refuse to execute the contract of sale and to demand the return of the amount paid for such goods or to demand to replace it with a product of the same brand (model, article) or the same product. brand (model, article) with a corresponding recalculation of the purchase price within fifteen days from the date of transfer of such goods to the consumer.
http://ozpp.ru/laws/zpp/18.php

--------------
* At this time, the Apple company manages to save on everything, and as a result of this we very often get: killing the battery controller after discharging at 0%; the inability to use the device at a temperature below -20 (it just turns off); Overheating of the battery from some games (an alert about this will appear on the screen) .. and so on and so on
** There are individuals who completely turn off the device for a short period of inactivity .. sometimes there are absolutely monstrous options - switching off after each use 10-20 times a day


Post has been editedMadfile - 06.10.14, 19:53
Reason for editing: info added



Rep: (1137)
No network bad catches the net

Attached Image

Immediately the main thing - all the steps to resolve the problem.
You can do everything in order - after each action to monitor the network
Reboot; turn off the Internet; reset network settings; reflash with setting as newwithout restoring backup (during the firmware due to the deceased modem, you may receive an error and the impossibility of further procedures); change sim card ; make an official unlock; to give in service on diagnostics, repair; take to the store (during 15 days after purchase or under warranty, if more than 15 days have passed) or sell for parts

Now a little materiel
The more firmware, rollbacks, custom settings and other dances with a modem are made in life, the more problems will come soon, because the modem is one of the most fragile and problematic parts in apple products
The modem may stop working after a normal update - wifi and communication will disappear or turn off, when you enter Settings, it will hang up for 2-10 seconds, and with firmware it will appearerror -1or the inscription “Device Replacement Required” .. people start to be surprised and say “the phone didn’t throw, didn’t drown, didn’t burn”, but all this doesn’t matter - the hidden marriage just got out, or the device received a modem failure with the firmware (may be missing / unstable communication and will soon disappear completely)
Very frequent and massive problems exist with ios7 firmware - in 95% of such cases, this problem means that the modem is completely or partially killed and the road to service
And by itself, the modem can die from other influences: from impact, water or time; from a pledged hidden marriage; from problems with unlock; from problems with the mobile operator; from problems with a sim card (trimming a sim cardnot to do - it may appear imperceptible, but affecting the work of the device microcracks); from power surges; from unauthorized reboot during firmware; from disconnecting the wire with firmware, etc. and etc.



Rep: (1137)
iTunes / computer does not see the device

The reasons are few: poor usb cord; bad usb connector on the computer itself (connect to the connectors on the back of the computer); wrong driver; blocking firewall / antivirus; outdated itunes; glitch ios; dead connector and other hardware on the device itself

To understand for a start myself.
Reload, reset settings (do not reset with jail)
In the device manager (in the portable devices tab) we find the MTP device, go to its properties
Win 64: Properties - Update Driver - Manually and Further C: \ Program Files \ Common Files \ Apple \ Mobile Device Support \ Drivers
Win 32: Properties - Update Driver - Manually and Further C: \ Program Files86 \ Common Files \ Apple \ Mobile Device Support \ Drivers
Click "Next" - the device should be immediately displayed in the computer

What else to do?
Read the forum.
Itunes ipad sync
itunes does not see iphone
iTunes does not see the iPhone
iPhone does not see the computer
The computer does not see one of the two ipad
The computer does not see the phone
The computer does not see the ipad 4

Read online.
https://www.google.com/search?q=itunes+%D0%B...a:ru%3Aofficial
https://www.google.com/search?q=itunes+%D0%B...a:ru%3Aofficial

Post has been editedMadfile - 19.10.14, 18:25
Reason for editing: added information about MTP



Rep: (1137)
Activation after firmware / flashing / rollback

With ios7, a system was introduced against the theft of devices and against bona fide buyers of used devices - after flashing, activation with the help of apple id will become mandatory
What apple id is needed? The oneused by the seller before the sale

There is an option to contact apple support - read below.

Information for review
What buyers do
Before buying check:
- if when you unblock a request with a password appears, the data is not erased .. let the seller erase everything with you (full reset);
- if the device is clean, just stitched and the password is not visible, then all the same it is necessary to secure and erase everything (full reset)
Settings - General - Reset - Reset content and settings

After that, start setting up the device.
If after installing the language, country, and connection to the cellular network, activation of the device begins and the apple id appears, the device is tied to the seller’s account

What do sellers
BEFORE selling / donating / transferring a used device there are mandatory conditions:
- disable find my phone;
- remove the device from the icloud account and exit the apple id

If you forgot to do all this, then AFTER the sale / donation / transfer of a used device there is an opportunity to untie the device from yourself.
If you are using iCloud and the Find iPhone feature is enabled, you can erase the data remotely and remove the device from your account. To do this, go to the website icloud.com/find, select your device and click the "Erase" button. After erasing data from the device, click the "Remove from account" button.
All information herehttp://support.apple.com/kb/HT5661?viewlocale=ru_RU

the main thing
If the seller did not disable find my phone and did not delete the device from icloud, then:
- when reflashing, the new owner will not be able to use the device (activation is impossible);
- the seller at any time canremotely block device - the buyer will not be able to use it;
- full reset of content and settings will not save the buyer from these problems
пїЅ

Contact Apple support.
Fromlikiblack
To remove the Activation lock you need to send a letter to the box [email protected] [/ color] with the text Case ******* Activation lock
and attach to it a photo of a sales receipt and a box from your device (if there is no check, send just a picture of the box)

where "*" is your contact number in technical support

The decision will come to your box within 2-4 days!

Good luck to everyone !!!
If someone will write, please reply to unsubscribe to me at [email protected]

------------------
Fromatsurban
Apple Support: +7 (495) 580-95-57
From 09:00 to 19:45 Moscow time (Monday - Friday)
I first wrote on the site appealhttp://www.apple.com/en/support/contact/then they called me back. And the appeal number was immediately sent to the soap.
The serial on the box and on the tray for SIM cards.

------------------

If everything works out, then when you activate the button will "Skip"
------------------

And another topic to learn.
I can not activate, requires apple ID

Post has been editedMadfile - 23.03.14, 19:08



Rep: (1137)
Time is lost

Attached Image

Problem information
Time stops on the iphone, lags behind when the device is idle in the standby mode, immediately after the display is turned off, it gets off and is set incorrectly in time zones, etc., etc.
Initially, everyone thought that the problem concerns only American operators and is the incorrect processing of the time code
Then the problem manifested itself throughout the world and it became clear that American operators had nothing to do with it.
The number of calls from iphone 5, 5c, 5s is constantly growing and does not depend on regional settings, or on any others .. it works for some, for others it does not work with similar conditions

Time on the device does not work (all the time randomly changes, stops)
Constantly getting lost time.

Possible troubleshooting
Everything is simple, as always - you can make either of the options listed below, or all, but not the fact that one of the existing options will save and therefore we conclude - the device is defective

Disable in the settings: date and time - automatically - off
Set the time on the device and sync with itunes
Reset; reset network; reset all settings (not to doon hacked devices)
Re-flashing through the computer, setting up from scratchwithout restoring backup (Locked devices can become a brick)
Pass under warranty for exchange or repair (problem may be in the processor, motherboard, LTE, GPS ...)

Post has been editedMadfile - 13.06.14, 12:17



Rep: (21)
iPhone / iPad / iPod does not charge, does not see charging, iTunes is silent as a fish, not included in dfu.
Attached Image
So, after a year or two of using the iPhone, one day he refuses to charge: huh :. If it does not help, move on to another.
There are many ways to solve this problem, but some of themdangerousfor the health of the average user and his iDevice
0. Checking wires and plugs
Consider the simplest situation: some evil for the wires lives in the house: a cat, a dog, a child, home with "golden" handles. A cat (dog) or a child can clearly gnaw through the wire, which is noticeable. But having carefully examined the wire, you didn’t notice anything o.O, because your wife was twisting your wires or you incorrectly transporting the cable interrupted it near the usb or dock / lighting connectors
Prevention
Store and transport wireRIGHT
Attached Image
Decision
Ask neighbors, acquaintances, friendsCORD AND FORKand check the operation of the device

1. Dirty charging connector
Most often, phones are stored in pockets and bags where it is full of dust and small debris.
Prevention
Need to buy plugs for iphone. They cost a penny, and the benefits per million
Attached Image
Decision
Take a toothpick, needle or similarONLY THEN VACUUM CLEANERand pull out the dirt

2. The battery is discharged to zero or: suicide:
iDevice long lay on the shelf or another problem ...
Prevention
Recharge the phone on time
Decision
1 way
1. Leave the phone at night / for an hour on the charge
2. Without taking off the charge, hold home + power for a minute 3.profit!

2 way (privates go to another step)
Try to give the battery "direct" electricity.
1. Disassemble the deviceIfixit.com to help
2. Pull out the battery
3. Connect +/- charging with the battery, respectively, orCharging frog
4. Watch on charging
5. profit!
6 *. If it did not help, just order a new battery with ebay

3 way
We stamp in the SC

3. The charge distribution controller broke or burned out a discrete element in the power supply strapping.
This is destiny :(
Prevention
Do NOT use Chinese fake chargers
Decision
Privates
We stamp in the SC
The pros


Post has been editedkirill984 - 27.08.14, 15:55



Rep: (1137)
Problems after firmware (lags, glitches, brakes)
Attached Image

After the next firmware, people notice that the system has become either blunt, or lagging, or there is a high battery discharge.
Ios begins to find fault, remember the cloudless past and try to roll back to the previous one, but it makes no sense to do it - bugs can appear on the last firmware when rolling back
Of course, many people do not have problems and this is indisputable, but the conversation will go about those who have problems immediately after the firmware

Glitches appear only in three cases:
- update / download firmware over the air via wifi;
- rolling firmware in itunes through the update (rarely, but accurately);
- backup on top of installed ios

A large percentage of failures will appear after backing up backup
And if the backup from the previous ios (for example, from ios 6 to ios 7), then this is absolutely bad .. the backup can be accompanied by ubiquitous glitches, bugs, lags, application crashes and other system problems
Almost always when flashing through the air, lags will appear, jerks and the smoothness of the interface will disappear

Some tips and thoughts about the firmware for smooth and bug-free operation of the device:
- new firmware is a reason to clean the system, return it to the state out of the box;
- A new firmware is a reason to clear the memory of the device, because without backup from the app, only 10-15% of the progs used earlier are installed;
- A new firmware is a reason to understand your programs and install only really needed ones or find something new, forgetting the old stuff that you don’t use at all, is lying idle and will soon be left without the support of the officers (when new firmwares, hardware, devices)

Actions that best protect the system from glitches:
- always flash through itunes;
- configure the system is always from scratch;
- do not restore backups;
- install applications from scratch from the appstore

If nothing helps, then the last option, with the help of which you can remove all the problems - firmware via dfu
[FAQ] Enter DFU mode
Copies do not restore

And once again the main thing
There is no point in rolling back or waiting for future firmware for better performance and eliminating glitches - in 99% of cases the problem is solved by simply flashing itunes without restoring the backup or flashingto dfu / recovery without restoring backup on the firmware that started to fail after installation and which is relevant at the moment

If after that there are noticeable and hard braking, then the problem may be in the hardware (modem, wifi, memory, processor)

Post has been editedMadfile - 23.09.14, 10:35
Reason for editing: info added



Rep: (1137)
Any ios browser crashes

The actual life of the browser in graphics
Attached Image

The most important thing - the departures were always and they are always purely individual, depend on a huge number of trifles: the version of iOS: the version of the programs; system settings and clutter; legality of software; the state of "iron"; the content of visited sites, etc. and etc.

When you enter some pages or when you surf the Internet, the browser closes for no reason and the desktop appears on the screen .. The main reason is the memory overflow on the device and nothing can be done about it
The second reason is software: a lot of flash, video, graphics and other multimedia on the page / site; code / script conflicts with ios; other content recognition problems .. you can simply not go to these pages / sites
(when jail came out on ios7 wereglobal problemsdeparture right after launch, but this is a completely different story and it has long been resolved)

What can be done:
- discard all running applications from memory or reboot the device;
- disable synchronization: Settings в†’ General в†’ iCloud в†’ Bookmarks;
- disable autocomplete: Settings в†’ Safari в†’ Autocomplete в†’ Contact data, Names and passwords;
- clean the browser cache andunderstand its settings;
- remove / disable download managers, anti-advertising and other plugins

I do not advise you to reflash or reset the settings with the desire to fix this problem .. At best, it will not appear immediately, but will begin to appear soon, when the system returns to its normal operating state, it will configure and receive the entire set of programs that the user needs.
In the worst case, the problem will appear immediately upon entering the site, the conflicts with which cause the browser crash.



Rep: (0)
Inadvertently deleted the / Applications folder? Does not run any stock (standard) application?
Here is the solution:

1. If you had installedOpen ssh, then:

Open SSH Terminal in the IFunbox program (if the program requires a password: standard -alpineif before it was changed to another one, then we enter our own) and immediately proceed to step 2

If you have NOT installed Open SSH go to the following sub-items:

1a DownloadTerminal in formatipa ( link to download ). Install it on the device

Note: Unfortunately, you can only install Terminal if you have been installed in the system.Appsync

1b. Open the terminal and install OpenSSL (without OpenSSH installed) andOpen ssh:
su
password (standard Alpine)

apt-get install OpenSSL
apt-get install OpenSSH

2. Next, in the same terminal reinstallCydia,entering commands:

apt-get remove Cydia
apt-get install Cydia


5. Then restart the device. After the reboot, run Cydia, it will update the data and restore the link, but at the same time creating a new path var / stash / krakozyabry / Applications (previously there was a path, let's sayvar / stash / _. U2Miww / Applicationsand becamevar / stash / _. wr5d5q / Applications. Everyone has their own "krakozyabry" on the device, so the exact name of this folder is impossible to say, you need to identify it yourself)

6. OfCydiawe installiFile

7. RuniFileand move all folders from the old var / stash / krakozyabry / Applications path (in this casevar / stash / _. U2Miww / Applications) to a new one (in this casevar / stash / _. wr5d5q / Applications). Reboot the device, after which all applications are restored and everything returns to its original state (which was before the "failure")

Note:
Actions from this point are performed via iFile in order not to lose the rights to executable program files. Those. we copied all the folders, rebooted the device, after which all applications reappeared on the desktop and immediately began to work without reinstalling. Had copied throughiFunbox,then you would have to reinstall the rights to the executable files (or you would have to reinstall the applications completely, and so we saved all the data and restored full functionality)


8. Old Applications folder (in this casevar / stash / _. U2Miww / Applications) became empty after moving files (see clause 7), so it can be deleted due to uselessness.

Post has been editeddirectorgeneral - 07.10.14, 13:41



Rep: (1137)
LTE - 3G - 2G switches in ios8

1
. If the operator supports voice transmission via LTE
- complete LTE shutdown
- voice calls and cellular data via LTE
- only cellular data without voice transmission over LTE
Attached Image

2. If the operator supports LTE (may be called 4G), but does not support voice transmission via LTE
- cellular data via LTE
- LTE availability, if possible
Attached Image

3. If the operator is in LTE testing / setup
- connect via LTE, if possible
- connect via 3G, if possible
- connect via 2G if possible
Attached Image
(when the network is finally rebuilt for LTE, the 2G-3G switches will no longer be available)

Post has been editedMadfile - 26.10.14, 20:29



Rep: (1776)
Actions when water enters the device

SC-Orbita 05/15/2015, 1:51 PM*
IF YOU FILL YOUR IPHONE.

OPTION 1 - DIRECT HANDS.

1. NEVER, UNDER ANY CONDITIONS, DO NOT TURN ON YOUR IPHONE until all the points are met
2. If you are removed from the conditions for repair - remove the battery, even with a knife open the cover and screws.
3. Put in fig.
4. Do not dry "on the sun and on the battery."
5. Completely disassemble, FULLY - it means to remove all the cables, the board, ALL screens from the board.
6. Throw a fee into the ultrasonic bath with a washing liquid, bathe a lot of time. After purging with compressed air. If there is no ultrasonic bath, clean it long and hard with alcohol. Check all contacts under the microscope.
7. Check the voltage on the battery, if it has died - replace it.
8. Try to turn on - if not, change the loop by typing.
9. If nevertheless not - in SC.

OPTION 2 - CURVE HANDS, NO TIME, RESPECT THE WORK OF THE MASTERS AND ITS TIME.

1. Turn off.
2. NEVER, UNDER ANY CONDITIONS, DO NOT TURN ON YOUR IPHONE before transferring to SC.
3. Put in fig.
4. As soon as possible to carry in the SC.

Violation of the procedure, especially the first three points, in any variant entails more serious and costly consequences.



Rep: (652)
Did you use a non-native cable, and did the battery work deteriorate?

Perhaps calibration will help you.

How to calibrate an iPhone or iPad battery?
  1. Fully discharge your gadget battery. The device must turn itself off due to full charge exhaustion.
  2. Charge your iPhone and iPad battery by 100%. Do this by connecting the device to a standard power supply.
  3. When the charge indicator shows 100% leave the machine connected to the network for another hour.
  4. Disconnect your iPhone or iPad from the adapter and use it as usual. But now again you need to discharge the device until it is completely turned off (in the process of discharging you should not connect it to the power adapter).
  5. Repeat step 2 and step 3 - fully charge the battery and do not unplug the smartphone / tablet for another hour.


Post has been editedKUKUndrik - 16.05.15, 13:43



Rep: (652)
Solving a problem with poor Wi-Fi on iPhone and iPad.

The main reasons for poor performance can be:
  1. software failure;
  2. problems at the hardware level;

In case of software failure, a malfunction is expressed in the absence of a badge, a change in its color (turns gray), or an extremely low data transfer rate. This is especially true for users who have switched from iOS 6 to iOS 7 / iOS 8, and is also observed when upgrading from iOS 7 to iOS 8.3. If Wi-Fi on iPhone does not work for you due to software failure, then you can try to solve this problem yourself:
  • Device reboot is the main way to solve all temporary glitches on any devices.
  • Resetting the network settings, sometimes erroneous data gets into the settings, which causes incorrect operation of Wi-Fi. To reset, go to the following path:Major ->Reset ->Reset network settings .

After a reset, in theory everything should start working.

Second (more serious) the reasons why Wi-Fi in iPhone doesn’t work is a hardware level problem. A clear sign that the reason why Wi-Fi is not working on an iPhone has a hardware character, this is the inactivity of the Wi-Fi switch-on point and the lack of information about the mac address in the device information. Causes of breakdowns:
  • Wi-Fi antenna failure - the nature of the failure may differ from the iPhone model. If, for example, the iPhone 4S does not have Wi-Fi, then the reason lies in the defect of the soldered antenna elements. Starting with iPhone 5, a breakdown results in damage to the coaxial cable at the attachment point to the retainer;
  • Chip Damage.

Most often such damage occurs due tomechanical impact . This can be either a fall from a sufficiently large height (2-3 meters) or a strong impact of the rib. iphone on a hard surface.

This problem can be solved by replacing the Wi-Fi antenna or chip.The work should be done by an experienced master. . It is not recommended to try to fix the device yourself.

Here I will give the prices for Wi-Fi chip repair:
  • iPhone 4 / 4S - 4000 thousand rubles
  • iPhone 5 - 6500 thousand rubles
  • iPhone 5C / 5S - 7000 thousand rubles
  • iPhone 6/6 Plus - 8000 thousand - 9000 thousand rubles



Rep: (133)
* KUKUndrik,
I will add more from myself ..

By “non-native” cable means a frank leftist or cheap crap who has not received official homologation from Apple. Belkin, InCase, Moshi, Mophie and, in general, any other companies that are present on Apple’s official websites in different countries as accessories can act as a safe replacement for the native cable. Directly charging adapter is better to take a native or, in extreme cases, proven Belkin.

Battery calibration is very help programs like Battery Doctor and the like. They do not increase your battery capacity (as claimed by the advertising description), but help to correctly charge the battery. Few people know, but the most important stage of the charging process - the final. Not "buy" your Divays assurances that the battery is charged to 100% - at this moment begins the so-called "Crevice" charge. It's as if you filled a bucket of significant stones, and then began to pour water to completely fill the volume.

And further. Contrary to popular belief, with proper use of the battery, its life can be over 2 years. And 2 years is on average the moral life cycle of any smartphone.



Rep: (3)
two days in standby sat half, two weeks ago this was not. What's the matter? I did a hard reboot once and it seemed like it started with this. I bought a new one in a mvideo 9 months ago. IOS 8.1
The second photo - December 2014
Third photo - April 15
Attached Image
Attached Image
Attached Image


Post has been editedKUKUndrik - 28.02.16, 15:44



Rep: (3)
If the sound toggle switch on the iPhone does not work, enable the Assistive Touch function (Settings - General - Universal access - Assistive Touch).

A button will appear on the display, click on it, select Device - On. sound



Rep: (1)
Hello! ;) I did not find such a topic on the forum)
So I decided to share the solution to one problem that I encountered when using IPHONE 4S!

Iphone 4s does not turn off !!!

If you have when using the phone, noticed that the battery sits faster than usual, and at the same time such a bug began to manifest itself, when the phone is turned off then it will take 4-7 seconds. he turns on))) i. you can’t turn it off through the button either! (the On / Sleep button works clearly as in the new phone), then you can safely buy the lower loop (4s and 4 are different, and not interchangeable !!)
Attached Image
Most likely, the moisture got there and the charging connector paused (but at the same time, I had a white moisture indicator, quietly restored itunes, it also charges without problems.)

I bought a cable from a donor, a screwdriver, sat down and watched a video on disassembly, changed it myself, or nothing complicated, the main thing is to be careful and not in a hurry!

Thank you for your attention, good luck to all !!!!

Post has been editedGod_danych - 08.07.17, 19:11
Reason for editing: photo under spoiler



Rep: (348)
So. I will try to describe the problem:
I bought a girlfriend (my friend) 2 years ago iphone. iPhone 5. I then helped her activate and create an apple id. And ... everything ... since she used, did not install anything extra, and over time we completely forgot the password ... Now in order to install other programs on it or perform something important (which requires Apple ID) is simply impossible. ..
We found the password later, but it's late - the account is blocked and asks to restore the account. And in order to recover, he sends an email to ****@icloud.com. And there without a password does not enter. It turns out a vicious circle.

I created a new Apple ID from my computer, it turns out to install new applications through it, in principle, it suits it, BUT! ... There is a lot of music in the phone (about 7-8GB mp3 files), which for some reason is not visible on the phone, but visible in iTunes, and takes up a lot of space, 80% (the phone is only 16GB) ... The main question is: How to delete these files ???
Advise how to delete these files? What are the ways. If possible, different possible solutions to this problem ...

thank


Full version    

Help     rules

Time is now: 08/08/20, 00:33