VENZ K1 (DVB-T2) - Discussion | TV Box + DVB-T2 on Amlogic S805 chip
TV Box + DVB-T2
under the messages to which you want to add links. You have something incomprehensible, the 5th picture shows that only 4 Kb is occupied on the disk ... disk space, and where is the firmware?
Or is it BEFORE copying files?
Post has been editedHrustic - 17.06.15, 14:16
Or is it BEFORE copying files?
Post has been editedHrustic - 17.06.15, 14:16
Nodigger @ 06/16/2015, 17:25
Yes, it seems I’m doing everything right. Now again I asked the result the same thing
The firmware on the pictures is correct. After the firmware did you reset to the factory settings? After the reset, did it all remain?
And why do a reset to the factory (they are wipes) after the firmware separately?
If flashing according to instructions(given in post # 36), then wipes are done on the machine.
If flashing through Settings - Update indicating the path to the firmware, then you need to check the corresponding boxes.
Post has been editedHrustic - 17.06.15, 15:06
If flashing according to instructions(given in post # 36), then wipes are done on the machine.
If flashing through Settings - Update indicating the path to the firmware, then you need to check the corresponding boxes.
Post has been editedHrustic - 17.06.15, 15:06
Hrustic @ 06/17/2015, 15:06
And why do a reset to the factory (they are wipes) after the firmware separately?
So that only what was installed with the latest firmware remains. If after the reset the program for the satellite comes out again, then this is already something incomprehensible.
Hrustic @ 06/15/2015, 18:41
2. How to update the firmware from the menu?
I bought a new SD card and everything was done. But stubbornly does not catch channels. There are two indicators - signal strength and quality. The signal level is 80-100%, and the quality is about%.
Dismantled, looked at the soldering of the antenna jack. There, one red wire goes to the second board. Everything seems to be soldered. While I use as an IPTV set-top box. Maybe over time there will be a solution.
And the memory there is only 791 MB, instead of the declared gig, and the internal memory is slightly more than 5, instead of the declared 8. China, however.
By the way, in my DVB settings I have only those countries in which the broadcast standard is DVB-T.
Guys, I myself see this for the first time, the impression is that not everything is written during the firmware, because if I roll back to January, DVB-T2 appears, but when I click on the channel search it now hangs, although it did not initially hang.
I’ll torment a couple more days if I don’t master send it back to the narrow-eyed. The toad strangled a normal receiver to take - that’s the reckoning for me.
I’ll torment a couple more days if I don’t master send it back to the narrow-eyed. The toad strangled a normal receiver to take - that’s the reckoning for me.
[email protected], 18:59
Guys, I myself see this for the first time, the impression is that not everything is written during the firmware, because if I roll back to January, DVB-T2 appears, but when I click on the channel search it now hangs, although it did not initially hang.
I’ll torment a couple more days if I don’t master send it back to the narrow-eyed. The toad strangled a normal receiver to take - that’s the reckoning for me.
I’ll torment a couple more days if I don’t master send it back to the narrow-eyed. The toad strangled a normal receiver to take - that’s the reckoning for me.
After returning to the January firmware, did you reset to the factory settings? If you do not do a reset, data from the previous firmware remains and there may be problems. Reset should be done immediately after installing a new firmware, if there are glitches. It will not help then to return.
[email protected], 16:34
Hrustic @ 06/17/2015, 15:06 *
And why do a reset to the factory (they are wipes) after the firmware separately?
So that only what was installed with the latest firmware remains. If after the reset the program for the satellite comes out again, then this is already something incomprehensible.
And why do a reset to the factory (they are wipes) after the firmware separately?
So that only what was installed with the latest firmware remains. If after the reset the program for the satellite comes out again, then this is already something incomprehensible.
The question is not whether to make wipes or not. Wipes are required without fail!
But ... you need to do them BEFORE the firmware, and not after!
Which, however, is registered in the file factory_update_param.aml - first wipes, then firmware:
--wipe_data
--wipe_cache
--wipe_media
--update_package = / sdcard / KI-ota-20150505.V0823-t2.zip
A215 @ 06/17/2015, 18:26
I bought a new SD card and everything was done. But stubbornly does not catch channels. There are two indicators - signal strength and quality. The signal level is 80-100%, and the quality is about%.
One in one my problem! It was like this: ordered two identical arrived. First flashed May, everything is OK. Second immediately aroused suspicions: with the same remote control to work less. Tuner initially caught. 100 level, quality 70-80.Zaikalas skipped every two to three minutes. A day ride quality operation was even lower: 30-50% stammer became harder: every ten seconds. By the end of the day quality indicator finally ceased to glow blue-0%. I began to split hairs with stitching-zero sense! SALE sent ultranovuyu ask satelitovaya-set. After that, the tuner has ceased to be sewn at all, ie, firmware rises, and the menu in the satellite tuner. Spat. A day later, again I tried to flash-May stood with DVB T2 menu (cool, probably, I thought). But still nothing lovila.Mozh her more cool? Chpoks in the freezer, five hours: rofl: I pull out, connect, catch! o.O And so ten minutes. As warming is getting worse, worse. Fully warmed-back 0% quality ... The idea smaret box from the refrigerator did not appeal never: rofl:. Wrote the sell-sent a new one. It seems to work ... well, the current channel will not be sorted and Cody ... a strange-free Simple ai pi ti ve customer-blew-set from loosely.
Do not worry who got married with firmware, it won’t help, the problem is somewhere in the hardware
Martin0777 @ 06/20/2015, 04:48
the problem is somewhere in the hardware
That's for sure. I opened the box again, and there is a gift. In total there are two boards, a main one and antennas. So, I have s2 on the main bottom. Those. no DVB signal will be caught. And for the satellite, the antenna board is not suitable. Factory defect, but the order is confirmed ...
A215 @ 06/21/2015, 18:51
That's for sure. I opened the box again, and there is a gift. In total there are two boards, a main one and antennas. So, I have s2 on the main bottom. Those. no DVB signal will be caught. And for the satellite, the antenna board is not suitable. Factory defect, but the order is confirmed ...
If you send the prefix in exchange, then it’s definitely not worth the fix, it’s easier to throw it out than to fix it. There were no such defects on dual-core models; the boards are made at the same Videostrong factory, but why the quality has fallen so much. The satellite version of K1 has about 20% defect in t2 probably no less. If they had not sent a replacement for free, when they sent the set-top box back to China, at their own expense, buyers would go into minus.
So I won the tuner disease! Now prefix warmed in a microwave .... More seriously, the cause was not working tuner quartz resonator, the one that is installed in a shielded part of the tuner (in an iron box under the lid). Quartz 24 MHz. Exactly the same among the trash did not find, and found a board of some tele with flat feet, feet in the hole is not climbed, but now I have it vkoryachival damaged one track. As a result, the board stuck to a piece of foam rubber and placed quartz "nabochok" and Soldered. Track restored. Works. If the party was quartz with marriage, maybe my experience will be useful to someone.
Just found another school of Chinese Circuitry: does not work the antenna output. In the same way: when switched off and power-on signal appears for a few seconds. Theoretically the output should be a cross-cutting and not depend on the power. Channels are sorted and not ... Sometimes hangs androyd as well as applications. To sum up: the device is not for the trouble-free use. All what that glyuchnovatoe, unfinished, nedopilennoe, simplified circuitry crooked, crooked Russification. Who is willing to put up with all this or fight-take. Not worth the money ... the device the way to sell wholesale Chinese realize this wonderful Soup at $ 12.5 per share and the price with delivery ... This is probably his real price ...
Just found another school of Chinese Circuitry: does not work the antenna output. In the same way: when switched off and power-on signal appears for a few seconds. Theoretically the output should be a cross-cutting and not depend on the power. Channels are sorted and not ... Sometimes hangs androyd as well as applications. To sum up: the device is not for the trouble-free use. All what that glyuchnovatoe, unfinished, nedopilennoe, simplified circuitry crooked, crooked Russification. Who is willing to put up with all this or fight-take. Not worth the money ... the device the way to sell wholesale Chinese realize this wonderful Soup at $ 12.5 per share and the price with delivery ... This is probably his real price ...
Attached images
 |
 |
I solved the channel sorting problem: the LCN item (probably not translated lock channel number) in the general settings should be "off". After that, the channels are sorted.
I bought on a K1 dvb-t2 aliexpress four nuclear everything works very well, it does not heat up, the only time for the TV shows is not ours, but it doesn’t really bother me, the information is up-to-date.
Thebes throw the link where I took
What about the Vigica C90T? Is the quality better than K1?
Post has been editedMaxinc - 24.06.15, 21:17
What about the Vigica C90T? Is the quality better than K1?
Post has been editedMaxinc - 24.06.15, 21:17
Maxinc @ 06/24/2015, 21:11
What about the Vigica C90T? Is the quality better than K1?
In this threadVS IP015 and other android dvb-t2 / s2 digital set-top boxesThere are reviews about Vigica C90T. There are fewer problems with hardware, but there is a tip that the network does not work through the wire. No one has complained about the tuner yet, read the topic and draw your own conclusions.
Maxinc @ 06/24/2015, 21:11
What about the Vigica C90T? Is the quality better than K1?
For some marriage at K1 do not pay attention. If the seller is Shenzhen Venz Technology, then the defective item changes without problems. And they have decent support. Those. the problem with iron is not a problem. ;)
Martin0777 @ 06/30/2015, 05:04
For some marriage at K1 do not pay attention. If the seller is Shenzhen Venz Technology, then the defective item changes without problems. And they have decent support. Those. the problem with iron is not a problem.
The satellite version has a reject rate of 23%, in case of a malfunction, the prefix will be sent back to China at the buyer's expense. In addition, venz consoles are more expensive than other K1 sellers. On what conditions does the product change, why is the problem not a problem?
Martin0777 @ 06/30/2015, 08:04
If the seller is Shenzhen Venz Technology
And if another seller? Yes, and a return at own expense is a little expensive.
It turns out, while the prefix is ​​raw. So far, only one positive review from Thebes.
[email protected], 16:12
in the event of a malfunction, shipping the set-top box at the buyer's expense back to China.
No one has sent. The seller simply returned the grandmother.
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement