For performance S2A is necessary (from the word "necessarily") compliance with two conditions:
1. MANDATORY! presence root-access (to bypass the blocking party applications run by Google and full application). Root-access is prepared according to the instructions in the topic of your devaysa (individually)
2. Unlock needed third-party apps - Unlock Instructions
+ similar AAMirror

After you install and unlock the application you need to run the application and make its initial settings. One of the most important settings can be found in the "Settings screen recovery." You need to install the native resolution of the screen of the smartphone. This is done usually automatically by pressing the (cog) button.
Then in the box below (highlighted in blue) will show the factory settings resolution (size + DPI) of your smartphone screen. Make sure that they comply with the specifications of your smartphone (in 99.9% of cases they are determined correctly). However, if you have a smartphone with an unusual resolution and define automatic values ​​incorrect, set the parameters manually. Otherwise, if you disable the smartphone can catch a nasty bug related to the inability to support a specified resolution smartphone (UI glitches, cyclic reboot, etc.).

If disabling smartphone or exit from the AA (auto muted, closed emulator learned USB) smart phone resolution is not returned to its original state (incorrectly installed recovery options fail, especially smartphones, etc.), you must run AAMM, go to Settings в†’ Reset settings and select WM SIZE RESET option. Resolution is restored to the factory.
+ All the features of AAM

1. To play back the audio using the basic version of the player and the basic functions of the AA Route is not needed. To play a video need Root rights.
2. Downloadhere(orhere) And set as a normal application (in the settings of the video set up engines VLC, EXO or without the media player system resources).
3. To activate useAA Phenotype Patcher
4. Run the application on your phone and make the necessary settings (folders, media engine, etc.). Start at GU.

Link to original and modified versions
- Permission to capture the screen (required for the operation of the application).If AAM each time requests a connection.
- Permission to change the system settings (to control the brightness and the proposed landscape mode)
- Permission to display interface elements on top of other windows ("overlay" - for forced landscape orientation)
- ROOT rights (for the operation of the touch control, buttons "Back" and "Menu", changing the screen size from the PG)
NOTE. Currently AAMirror works ONLY with ROOT rights. If there are no ROOT rights, it is impossible to use unlock
- Inclusion of the application in the “white lists” of energy saving and autorun managers (necessary for the launch of service activities)

1. When the application is running, the image on the smartphone screen may be distorted. This is a normal occurrence due to the difference in the aspect ratio of the PG and the Smartphone. The consequences of this can manifest when the device is disconnected from the car in the form of a changed screen resolution. This is solvedone way(happens, as a rule, only at the first connection).
2. When the application is running, you cannot completely turn off the smartphone screen. You can reduce the brightness in the tinctures. If this is not enough, you can use third-party applications from the spoiler header. However, in any case, to achieve the full effect of turning off the screen is difficult. The same goes for screen lock. With a locked screen, mirroring cannot work, because This contradicts the very essence of mirroring.
3. Lonchery not all manufacturers of smartphones scale the desktop well when you rotate the screen and change the resolution. This is manifested by the incorrect display of the icons of the desktop of the smartphone on the PG (offset, mixing, etc.). In this situation, it is recommended to install and use another launcher that supports scaling. For example,Nova Launcher.
4. On devices with a "mono-brow", a bug may appear with incorrect display of the screen (black bar).Solution here.
5. On most devices with Android 9, running the AAM in the usual way will not work. This is manifested by a black screen on the GU. For Android 9, use alternate mirroring. Described below.
6. Not all applications are mirrored through AAM while maintaining full functionality. Yandex Navigator, in versions newer than 3.20, does not work correctly. The problem is on the side of YaN. They do not plan to solve it. Version 3.20 (or its mods) can be takenprofile topic.
7. Important!Keep in mind that the application is a non-profit and does not fully support. It is offered solely for information. Furthermore, Google does not approve of its use. Therefore, be prepared for failure, and the independent decision of some problems with the help of threads.

An alternative way to mirror the screen

1. Make sure you have Root rights installed. If not, then nothing will work.
2. Download and install the application (modifiedororiginalversion).
3. To activate useany actual way to unlockwhich has CarStream support (example).
4. Run the application on the smartphone and make the necessary settings (account, notifications). Run on GU.

- Download and install AnyAutoAudio
- Launch the music application (s)
- Run Android Auto on your phone or GU
- Activation is not needed (check that the "third-party applications" checkbox is removed in the AA settings "

For the application will require:
- installed Torque Pro application
- OBD2 scanner (bluetooth adapter)
- GU, compatible with Android Auto, or installed applicationHeadunit Reloaded (HUR).

How to buy?
1. Install a client on your phoneXDA Labs
2. Download and install OBD2 for AA.

How to use:
Android Auto 3.0 compatibility issue:
- in Android Auto 3.0, no third-party applications can be used out of the box, so OBD2AA provides a way (patch AA) to make such an application compatible with AA, but this will require either a rooted phone or a Windows computer.
1. Install the application
2. Ensure that no other third-party Android Auto application is installed on your device.
2. Run the patch (Root users need to installBetaversion, users without root - read the "how-to" branch in the application)
3. Run and configure the application. We hope the setting will be clear enough (choose colors, set the number of dials, etc.)
4. Start Android Auto, go to the menu item "About the application." If you are not a developer yet, perform 10 clicks on the “About Android Auto” heading until you see a pop-up message that you are already a developer.After that, a new item will appear in the menu - “For Developers” - open it, scroll down and make sure that the option “Unknown sources” is enabled - This step is not always required if the application is not displayed on the machine screenIn the menu in the upper right corner (three points) select the item “Enable server of the head unit” (ROOT users can skip this step!)
5. Close Android Auto
5. Connect your phone to your car / PG /HUR
6. MAKE SURE YOUR MOBILE DEVICE IS UNLOCKED AND CONNECTED TO YOUR CAR. When the question "which application to use" appears, select "OBD2AA" and "always" (you will need to do this only once). If you are using HUR - choose Android Auto and "always"!
7. In AA on the PG, press the right-most button below and in the list of applications select OBD2AA
8. Give the plugin some time to start receiving data from Torque.