LINUX on UEFI 32bit | [linuxos] tablets and TV box INTEL Bay \ Cherry Trail



Rep: (126)
LINUX on UEFI 32/64 bit


The topic discusses installing any kind of LINUX on tablets and TV boxes on INTEL Bay [Cherry] Trail with UEFI 32 / 64bit

Specifications
Specifications:
INTEL Bay [Cherry] Trail.
The screen size, touchscreen, Ram, Rom, it's all not important, they are almost identical, in tablets on Intel.
additional information
If you were able to launch Linux on your machine, write its name, what does not work and what works and how you launched it.
P.SThe topic is forbidden to discuss dualboot Android / Windows only linux / windows
Linux builds
Instructions
Drivers and sources
Kernel

Neighboring topics



There is no curator in the subject. For questions about filling the caps, please contact me atQMSif you found an interesting article or information.


Post has been editedM | A | G - 20.04.20, 18:06
Reason for editing: + autorotation guide



Rep: (542)
* laert00 , Cool. In Debian and Ubuntu did not work properly to get to work device



Rep: (115)
Holders es8316, with the advent of support for this audio chip in modern Linux distributions you also hear periodic clicks from the speakers? I Digma CITI E201 and clicks can be heard from the beginning sound support until the last kernels. This is a poor-quality driver? In Windows, this behavior was not observed.



Rep: (0)
Good day, I have a tablet Prestigio Visconte V, on the to-ing installed Ubuntu 18.04 LTS. There is no sound at all, and the standard methods from the Internet (that is manipulation ALSA) do not help. I suppose that is not determined by the sound card, as its name is not displayed, in the "source of the audio output," it is not. I attach a screenshot from Terminal.
The probability that I have broken iron itself is small, because before that I tried Fedora from a USB drive, and there is just the sound was very good, but it did not work the touchscreen, so I did not try to establish Fedor (the more so because for some reason We do not want to format the partition).
Now Ubuntu everything else, except for the sound works fine with me, even though the screen rotation is in the wrong direction, but I just turned off.

Attached images
Attached Image
Attached Image



Rep: (80)
* Lyzavta , Aplay -L that says?
And not a bad thing to see dmesg

Post has been editedlaert00 - 29.03.20, 21:04



Rep: (15)
My hands got a tablet lenovo 1051L, just decided to try to boot from a flash drive.
UploadedRescue-cd, Recorded on a flash drive,
then flash drive in / boot / efi bootx64.efi replaced on bootia32.efi e.g.from here
and easy to load. After downloading the wifi and touch once earned, the rest did not check.
One realized that more or less normal operation need a fresh kernel, here it is linux-5.4.28.
I think with the help of this flash drive can be rolled forward or normal arch gentoo (if gentoo Campiglio on a normal PC in the chroot), to collect fresh kernel with the right.
You can wait there like Ubuntu 20.04 kernel is linux-5.4.
You can make the flash drive according to the instructionshereOnly stage3 I would take 64 bits.

P.S. USB flash drive made to rufus for UEFI non CSM.

Post has been editedpostmdk - 30.03.20, 10:22



Rep: (395)
* postmdk, meaning? With the launch of no problems. You do not even have verified that the sound does not work and, accordingly, the video does not work properly, and it is one of the most important functions.

Post has been editedKitsune2222 - 30.03.20, 10:32



Rep: (4)
Help is needed. Nakata on irbis tw48 fedora, stood up normally. But the screen is rotated, and touch not furychit. How to treat?



Rep: (0)
It has a tablet Lenovo miix 3-1030 (Z3735F), dualbut, win10 and Lubuntu (20.04).
That works out of the box:
  1. WiFi
  2. Adjusting the brightness (but after the restart reset to maximum)
  3. Touchscreen (he was defeated and only works half, use a keyboard cover)
  4. Poderzhka memory card (check with 64GB)

What does not work:
  1. Auto-rotate screen (landscape orientation is always that I accept in principle)
  2. Sound

It has not been verified:
  1. Bluetooth
  2. Camera

From all of the above really need sound advice from the cap did not help, the speakers silence when headphones are connected audible hiss, but the sound is still there.
In pavucontrol have Speakers and Headphones (unplugged) when you switch to that writes establishing connection to pulseaudio please wait, and then restarts the window and then select Speakers
Attached Image



Rep: (80)
* Allmint , The sound - dmesg and lsmod attach

In miix February 10 rt5672 sound worth Vang that you have the same. Find a datasheet on your tablet or just pick the body (I own sound chip has detected it by autopsy)

To rotate the screen recommend reading about tablet pc on archviki trade, there are a few effective tips

Post has been editedlaert00 - 01.04.20, 00:13



Rep: (0)
* laert00, I'm afraid to open, as the glass is broken.
About screen rotation thanks, honor.
[0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
[0.000000] Linux version 5.4.0-21-generic (buildd @ lcy01-amd64-006) (gcc version 9.3.0 (Ubuntu 9.3.0-8ubuntu1)) # 25-Ubuntu SMP Sat Mar 28 13:10:28 UTC 2020 (Ubuntu 5.4.0-21.25-generic 5.4.27)
[0.000000] Command line: BOOT_IMAGE = / boot / vmlinuz-5.4.0-21-generic root = UUID = bd957af1-de32-45e3-b5e4-be97c4e099dc ro quiet splash vt.handoff = 7
[0.000000] KERNEL supported cpus:
[0.000000] Intel GenuineIntel
[0.000000] AMD AuthenticAMD
[0.000000] Hygon HygonGenuine
[0.000000] Centaur CentaurHauls
[0.000000] zhaoxin Shanghai
[0.000000] x86 / fpu: x87 FPU will use FXSAVE
[0.000000] BIOS-provided physical RAM map:
[0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000025230fff] usable
[0.000000] BIOS-e820: [mem 0x0000000025231000-0x00000000252fffff] reserved
[0.000000] BIOS-e820: [mem 0x0000000025300000-0x000000007b752fff] usable
[0.000000] BIOS-e820: [mem 0x000000007b753000-0x000000007b9b2fff] reserved
[0.000000] BIOS-e820: [mem 0x000000007b9b3000-0x000000007b9b3fff] usable
[0.000000] BIOS-e820: [mem 0x000000007b9b4000-0x000000007b9b4fff] reserved
[0.000000] BIOS-e820: [mem 0x000000007b9b5000-0x000000007b9b6fff] usable
[0.000000] BIOS-e820: [mem 0x000000007b9b7000-0x000000007b9b7fff] reserved
[0.000000] BIOS-e820: [mem 0x000000007b9b8000-0x000000007c7fffff] usable
[0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007cc1efff] usable
[0.000000] BIOS-e820: [mem 0x000000007cc1f000-0x000000007cc46fff] reserved
[0.000000] BIOS-e820: [mem 0x000000007cc47000-0x000000007ccb6fff] ACPI NVS
[0.000000] BIOS-e820: [mem 0x000000007ccb7000-0x000000007ccf6fff] ACPI data
[0.000000] BIOS-e820: [mem 0x000000007ccf7000-0x000000007ccfffff] usable
[0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[0.000000] BIOS-e820: [mem 0x00000000fff60000-0x00000000ffffffff] reserved
[0.000000] NX (Execute Disable) protection: active
[0.000000] efi: EFI v2.40 by INSYDE Corp.
[0.000000] efi: ACPI 2.0 = 0x7ccf6014 ESRT = 0x7b836310 SMBIOS = 0x7b8a4000 TPMEventLog = 0x7b54f010
[0.000000] secureboot: Secure boot disabled
[0.000000] SMBIOS 2.7 present.
[0.000000] DMI: LENOVO 80HV / Martini, BIOS B4CN29WW 12/04/2015
[0.000000] tsc: Detected 1332.800 MHz processor
[0.000032] e820: update [mem 0x00000000-0x00000fff] usable ==>reserved
[0.000039] e820: remove [mem 0x000a0000-0x000fffff] usable
[0.000060] last_pfn = 0x7cd00 max_arch_pfn = 0x400000000
[0.000067] MTRR default type: uncachable
[0.000070] MTRR fixed ranges enabled:
[0.000075] 00000-9FFFF write-back
[0.000079] A0000-FFFFF write-protect
[0.000082] MTRR variable ranges enabled:
[0.000086] 0 base 0FFF60000 mask FFFC00000 write-protect
[0.000091] 1 000000000 base mask F80000000 write-back
[0.000095] 2 base 07E000000 mask FFE000000 uncachable
[0.000099] 3 base 07D000000 mask FFF000000 uncachable
[0.000103] 4 base 07CE00000 mask FFFE00000 uncachable
[0.000107] 5 base 07CD00000 mask FFFF00000 uncachable
[0.000110] 6 disabled
[0.000112] 7 disabled
[0.000230] x86 / PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[0.010084] esrt: Reserving ESRT space from 0x000000007b836310 to 0x000000007b836348.
[0.010123] check: Scanning 1 areas for low memory corruption
[0.010139] BRK [0x3c601000, 0x3c601fff] PGTABLE
[0.010145] BRK [0x3c602000, 0x3c602fff] PGTABLE
[0.010149] BRK [0x3c603000, 0x3c603fff] PGTABLE
[0.010398] BRK [0x3c604000, 0x3c604fff] PGTABLE
[0.010405] BRK [0x3c605000, 0x3c605fff] PGTABLE
[0.011567] BRK [0x3c606000, 0x3c606fff] PGTABLE
[0.012379] BRK [0x3c607000, 0x3c607fff] PGTABLE
[0.012634] BRK [0x3c608000, 0x3c608fff] PGTABLE
[0.013345] BRK [0x3c609000, 0x3c609fff] PGTABLE
[0.013961] secureboot: Secure boot disabled
[0.013965] RAMDISK: [mem 0x1ae99000-0x1fffffff]
[0.013984] ACPI: Early table checksum verification disabled
[0.013993] ACPI: RSDP 0x000000007CCF6014 000024 (v02 LENOVO)
[0.014004] ACPI: XSDT 0x000000007CCD2188 0000DC (v01 LENOVO CB-01 0000001C 01000013)
[0.014020] ACPI: FACP 0x000000007CCF0000 00010C (v05 LENOVO CB-01 00040000 0000001C ACPI)
[0.014037] ACPI: DSDT 0x000000007CCDE000 00CDD3 (v02 LENOVO CB-01 00040000 0000001C ACPI)
[0.014049] ACPI: UEFI 0x000000007CCF5000 000,236 (v01 LENOVO CB-01 00040000 0000001C ACPI)
[0.014060] ACPI: TCPA 0x000000007CCF4000 000032 (v02 LENOVO CB-01 00040000 0000001C ACPI)
[0.014071] ACPI: MSDM 0x000000007CCF3000 000,055 (v03 LENOVO CB-01 00040000 0000001C ACPI)
[0.014083] ACPI: UEFI 0x000000007CCF2000 000042 (v01 LENOVO CB-01 00040000 0000001C ACPI)
[0.014094] ACPI: DBG2 0x000000007CCF1000 000,072 (v00 LENOVO CB-01 00040000 0000001C ACPI)
[0.014105] ACPI: HPET 0x000000007CCEF000 000038 (v01 LENOVO CB-01 00040000 0000001C ACPI)
[0.014116] ACPI: LPIT 0x000000007CCEE000 000104 (v01 LENOVO CB-01 00040000 0000001C ACPI)
[0.014127] ACPI: APIC 0x000000007CCED000 00006C (v03 LENOVO CB-01 00040000 0000001C ACPI)
[0.014138] ACPI: MCFG 0x000000007CCEC000 00003C (v01 LENOVO CB-01 00040000 0000001C ACPI)
[0.014149] ACPI: SLIC 0x000000007CCEB000 000,176 (v01 LENOVO CB-01 00040000 0000001C ACPI)
[0.014160] ACPI: SSDT 0x000000007CCDD000 000603 (v01 LENOVO CpuDptf 0000001C ACPI 00040000)
[0.014171] ACPI: SSDT 0x000000007CCDB000 001,707 (v01 LENOVO DptfTab 0000001C ACPI 00040000)
[0.014183] ACPI: SSDT 0x000000007CCDA000 000,058 (v01 LENOVO LowPwrM 0000001C ACPI 00040000)
[0.014194] ACPI: SSDT 0x000000007CCD9000 0000FF (v01 LENOVO SoCDptf 0000001C ACPI 00040000)
[0.014205] ACPI: SSDT 0x000000007CCD8000 00043A (v01 LENOVO Tpm2Tabl 0000001C ACPI 00040000)
[0.014216] ACPI: TPM2 0x000000007CCD7000 000034 (v03 LENOVO CB-01 00040000 0000001C ACPI)
[0.014227] ACPI: SSDT 0x000000007CCD6000 000,763 (v01 LENOVO CpuPm 0000001C ACPI 00040000)
[0.014238] ACPI: SSDT 0x000000007CCD5000 000,290 (v01 LENOVO Cpu0Tst 0000001C ACPI 00040000)
[0.014249] ACPI: SSDT 0x000000007CCD4000 00017A (v01 LENOVO ApTst 0000001C ACPI 00040000)
[0.014260] ACPI: FPDT 0x000000007CCD3000 000,044 (v01 LENOVO CB-01 00040000 0000001C ACPI)
[0.014271] ACPI: CSRT 0x000000007CCD1000 00014C (v00 LENOVO CB-01 00040000 0000001C ACPI)
[0.014282] ACPI: BGRT 0x000000007CCD0000 000038 (v01 LENOVO CB-01 00040000 0000001C ACPI)
[0.014307] ACPI: Local APIC address 0xfee00000
[0.014600] No NUMA configuration found
[0.014604] Faking a node at [mem 0x0000000000000000-0x000000007ccfffff]
[0.014634] NODE_DATA (0) allocated [mem 0x7b728000-0x7b752fff]
[0.015619] Zone ranges:
[0.015622] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[0.015627] DMA32 [mem 0x0000000001000000-0x000000007ccfffff]
[0.015631] Normal empty
[0.015634] Device empty
[0.015636] Movable zone start for each node
[0.015647] Early memory node ranges
[0.015651] node 0: [mem 0x0000000000001000-0x000000000008efff]
[0.015654] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[0.015657] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[0.015661] node 0: [mem 0x0000000020200000-0x0000000025230fff]
[0.015664] node 0: [mem 0x0000000025300000-0x000000007b752fff]
[0.015667] node 0: [mem 0x000000007b9b3000-0x000000007b9b3fff]
[0.015670] node 0: [mem 0x000000007b9b5000-0x000000007b9b6fff]
[0.015673] node 0: [mem 0x000000007b9b8000-0x000000007c7fffff]
[0.015676] node 0: [mem 0x000000007cc00000-0x000000007cc1efff]
[0.015679] node 0: [mem 0x000000007ccf7000-0x000000007ccfffff]
[0.016098] Zeroed struct page in unavailable ranges: pages 15725
[0.016102] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ccfffff]
[0.016109] On node 0 totalpages: 508563
[0.016113] DMA zone: 64 pages used for memmap
[0.016115] DMA zone: 21 pages reserved
[0.016118] DMA zone: 3996 pages, LIFO batch: 0
[0.016314] DMA32 zone: 7924 pages used for memmap
[0.016317] DMA32 zone: 504,567 pages, LIFO batch: 63
[0.039248] x86 / hpet: Will disable the HPET for this platform because it's not reliable
[0.039260] Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff]
[0.039330] ACPI: Local APIC address 0xfee00000
[0.039368] IOAPIC [0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[0.039377] ACPI: INT_SRC_OVR (bus bus_irq 0 0 2 global_irq dfl dfl)
[0.039383] ACPI: INT_SRC_OVR (bus bus_irq 0 9 9 global_irq high level)
[0.039390] Using ACPI (MADT) for SMP configuration information
[0.039395] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[0.039421] e820: update [mem 0x260d4000-0x261e2fff] usable ==>reserved
[0.039450] smpboot: Allowing 4 CPUs, hotplug CPUs 0
[0.039541] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[0.039549] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[0.039556] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[0.039558] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[0.039565] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[0.039572] PM: Registered nosave memory: [mem 0x25231000-0x252fffff]
[0.039580] PM: Registered nosave memory: [mem 0x260d4000-0x261e2fff]
[0.039587] PM: Registered nosave memory: [mem 0x7b753000-0x7b9b2fff]
[0.039594] PM: Registered nosave memory: [mem 0x7b9b4000-0x7b9b4fff]
[0.039602] PM: Registered nosave memory: [mem 0x7b9b7000-0x7b9b7fff]
[0.039610] PM: Registered nosave memory: [mem 0x7c800000-0x7cbfffff]
[0.039617] PM: Registered nosave memory: [mem 0x7cc1f000-0x7cc46fff]
[0.039620] PM: Registered nosave memory: [mem 0x7cc47000-0x7ccb6fff]
[0.039623] PM: Registered nosave memory: [mem 0x7ccb7000-0x7ccf6fff]
[0.039628] [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[0.039632] Booting paravirtualized kernel on bare hardware
[0.039640] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[0.039666] setup_percpu: NR_CPUS: 8192 nr_cpumask_bits: 4 nr_cpu_ids: 4 nr_node_ids: 1
[0.040714] percpu: Embedded 54 pages / cpu s184320 r8192 d28672 u524288
[0.040745] pcpu-alloc: s184320 r8192 d28672 u524288 alloc = 1 * 2097152
[0.040749] pcpu-alloc: [0] 0 1 2 3
[0.040874] Built 1 zonelists, mobility grouping on. Total pages: 500 554
[0.040877] Policy zone: DMA32
[0.040882] Kernel command line: BOOT_IMAGE = / boot / vmlinuz-5.4.0-21-generic root = UUID = bd957af1-de32-45e3-b5e4-be97c4e099dc ro quiet splash vt.handoff = 7
[0.041775] Dentry cache hash table entries: 262144 (order: 9, 2,097,152 bytes, linear)
[0.042167] Inode-cache hash table entries: 131072 (order: 8 1048576 bytes, linear)
[0.042272] mem auto-init: stack: off, heap alloc: on, heap free: off
[0.042281] Calgary: detecting Calgary via BIOS EBDA area
[0.042283] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[0.060817] Memory: 1837964K / 2034252K available (14339K kernel code, 2397K rwdata, 4944K rodata, 2712K init, 4992K bss, 196288K reserved, 0K cma-reserved)
[0.061396] SLUB: HWalign = 64, Order = 0-3, MinObjects = 0, CPUs = 4, Nodes = 1
[0.061436] Kernel / User page tables isolation: enabled
[0.061479] ftrace: allocating 44444 entries in 174 pages
[0.102837] rcu: Hierarchical RCU implementation.
[0.102842] rcu: RCU restricting CPUs from NR_CPUS = 8192 to nr_cpu_ids = 4.
[0.102844] Tasks RCU enabled.
[0.102847] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[0.102850] rcu: Adjusting geometry for rcu_fanout_leaf = 16, nr_cpu_ids = 4
[0.114553] NR_IRQS: 524,544, nr_irqs: 1024, preallocated irqs: 0
[0.114789] random: crng done (trusting CPU's manufacturer)
[0.114854] vt handoff: transparent VT on vt # 7
[0.114876] Console: colour dummy device 80x25
[0.114884] printk: console [tty0] enabled
[0.114942] ACPI: Core revision 20190816
[0.115389] APIC: Switch to symmetric I / O mode setup
[0.115447] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440 795 214 178 ns
[0.115459] Calibrating delay loop (skipped), value calculated using timer frequency .. 2665.60 BogoMIPS (lpj = 5,331,200)
[0.115466] pid_max: default: 32768 minimum: 301
[0.119452] LSM: Security Framework initializing
[0.119452] Yama: becoming mindful.
[0.119452] AppArmor: AppArmor initialized
[0.119452] Mount-cache hash table entries: 4096 (order: 3, 32,768 bytes, linear)
[0.119452] Mountpoint-cache hash table entries: 4096 (order: 3, 32,768 bytes, linear)
[0.119452] *** VALIDATE tmpfs ***
[0.119452] *** VALIDATE proc ***
[0.119452] *** VALIDATE cgroup1 ***
[0.119452] *** VALIDATE cgroup2 ***
[0.119452] mce: CPU0: Thermal monitoring enabled (TM1)
[0.119452] process: using mwait in idle threads
[0.119452] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[0.119452] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[0.119452] Spectre V1: Mitigation: usercopy / swapgs barriers and __user pointer sanitization
[0.119452] Spectre V2: Mitigation: Full generic retpoline
[0.119452] Spectre V2: Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[0.119452] Spectre V2: Enabling Restricted Speculation for firmware calls
[0.119452] Spectre V2: mitigation: Enabling conditional Indirect Branch Prediction Barrier
[0.119452] MDS: Mitigation: Clear CPU buffers
[0.119452] Freeing SMP alternatives memory: 40K
[0.119452] TSC deadline timer enabled
[0.119452] smpboot: CPU0: Intel (R) Atom (TM) CPU Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[0.119452] Performance Events: PEBS fmt2 +, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[0.119452] ... version: 3
[0.119452] ... bit width: 40
[0.119452] ... generic registers: 2
[0.119452] ... value mask: 000000ffffffffff
[0.119452] ... max period: 0000007fffffffff
[0.119452] ... fixed-purpose events: 3
[0.119452] ... event mask: 0000000700000003
[0.119452] rcu: Hierarchical SRCU implementation.
[0.119452] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[0.119452] smp: Bringing up secondary CPUs ...
[0.119452] x86: Booting SMP configuration:
[0.119452] .... node # 0, CPUs: # 1 # 2 # 3
[0.126389] smp: Brought up one node, CPUs 4
[0.126389] smpboot: Max logical packages: 1
[0.126389] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[0.128366] devtmpfs: initialized
[0.128366] x86 / mm: Memory block size: 128MB
[0.128576] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[0.128576] PM: Registering ACPI NVS region [mem 0x7cc47000-0x7ccb6fff] (458 752 bytes)
[0.128576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[0.128576] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[0.128576] pinctrl core: initialized pinctrl subsystem
[0.150597] PM: RTC time: 22:03:51, date: 2020-03-31
[0.151012] NET: Registered protocol family 16
[0.151196] audit: initializing netlink subsys (disabled)
[0.151223] audit: type = 2000 audit (1585692230.032: 1): state = initialized audit_enabled = 0 res = 1
[0.151779] EISA bus registered
[0.151809] cpuidle: using governor ladder
[0.151825] cpuidle: using governor menu
[0.151950] ACPI: bus type PCI registered
[0.151954] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[0.152160] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[0.152198] PCI: not using MMCONFIG
[0.152202] PCI: Using configuration type 1 for base access
[0.152790] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[0.158533] HugeTLB registered 2.00 MiB page size, pre-allocated pages 0
[0.167860] ACPI: Added _OSI (Module Device)
[0.167863] ACPI: Added _OSI (Processor Device)
[0.167866] ACPI: Added _OSI (3.0 _SCP Extensions)
[0.167868] ACPI: Added _OSI (Processor Aggregator Device)
[0.167872] ACPI: Added _OSI (Linux-Dell-Video)
[0.167875] ACPI: Added _OSI (Linux-Lenovo-NV-HDMI-Audio)
[0.167878] ACPI: Added _OSI (Linux-HPI-Hybrid-Graphics)
[0.216723] ACPI: 9 ACPI AML tables successfully acquired and loaded
[0.227360] ACPI: Dynamic OEM Table Load:
[0.227383] ACPI: SSDT 0xFFFF96A138BAE800 000,501 (v01 PmRef Cpu0Ist 00003000 20130117 INTL)
[0.231361] ACPI: Dynamic OEM Table Load:
[0.231381] ACPI: SSDT 0xFFFF96A138BAB000 000,433 (v01 PmRef Cpu0Cst 00003001 20130117 INTL)
[0.236269] ACPI: Dynamic OEM Table Load:
[0.236294] ACPI: SSDT 0xFFFF96A13C2D3600 00015F (v01 PmRef ApIst 00003000 20130117 INTL)
[0.239920] ACPI: Dynamic OEM Table Load:
[0.239939] ACPI: SSDT 0xFFFF96A13C0C0D80 00008D (v01 PmRef ApCst 00003000 20130117 INTL)
[0.251597] ACPI: Interpreter enabled
[0.251652] ACPI: (supports S0 S5)
[0.251656] ACPI: Using IOAPIC for interrupt routing
[0.251810] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[0.262430] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[0.262434] PCI: not using MMCONFIG
[0.262444] PCI: Using host bridge windows from ACPI; if necessary, use "pci = nocrs" and report a bug
[0.269746] ACPI: Power Resource [USBC] (on)
[0.270988] ACPI: Power Resource [WWPR] (off)
[0.283452] ACPI: Power Resource [PLPE] (on)
[0.300258] ACPI: Power Resource [CLK1] (on)
[0.301538] ACPI: Power Resource [P28X] (off)
[0.301719] ACPI: Power Resource [P18X] (off)
[0.303222] ACPI: Power Resource [CLK0] (on)
[0.308233] ACPI: Power Resource [P28P] (off)
[0.308421] ACPI: Power Resource [P18P] (off)
[0.308610] ACPI: Power Resource [P28T] (off)
[0.308795] ACPI: Power Resource [P18T] (off)
[0.308986] ACPI: Power Resource [P1XT] (off)
[0.318651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[0.318669] acpi PNP0A08: 00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[0.318928] acpi PNP0A08: 00: _OSC failed (AE_ERROR); disabling ASPM
[0.318975] acpi PNP0A08: 00: fail to add MMCONFIG information, can not access extended PCI configuration space under this bridge.
[0.320350] PCI host bridge to bus 0000: 00
[0.320358] pci_bus 0000: 00: root bus resource [io 0x0070-0x0077]
[0.320363] pci_bus 0000: 00: root bus resource [io 0x0000-0x006f window]
[0.320368] pci_bus 0000: 00: root bus resource [io 0x0078-0x0cf7 window]
[0.320372] pci_bus 0000: 00: root bus resource [io 0x0d00-0xffff window]
[0.320377] pci_bus 0000: 00: root bus resource [mem 0x000a0000-0x000bffff window]
[0.320381] pci_bus 0000: 00: root bus resource [mem 0x000c0000-0x000dffff window]
[0.320385] pci_bus 0000: 00: root bus resource [mem 0x000e0000-0x000fffff window]
[0.320390] pci_bus 0000: 00: root bus resource [mem 0x90c00000-0x90ffffff window]
[0.320394] pci_bus 0000: 00: root bus resource [mem 0x7cf00001-0x7ef00000 window]
[0.320398] pci_bus 0000: 00: root bus resource [mem 0x80000000-0x908ffffe window]
[0.320402] pci_bus 0000: 00: root bus resource [mem 0xfed40000-0xfed40fff window]
[0.320408] pci_bus 0000: 00: root bus resource [bus 00-ff]
[0.320437] pci 0000: 00: 00.0: [8086: 0f00] type 00 class 0x060000
[0.320739] pci 0000: 00: 02.0: [8086: 0f31] type 00 class 0x030000
[0.320761] pci 0000: 00: 02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[0.320777] pci 0000: 00: 02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[0.320791] pci 0000: 00: 02.0: reg 0x20: [io 0x1000-0x1007]
[0.320823] pci 0000: 00: 02.0: BAR 2: assigned to efifb
[0.321102] pci 0000: 00: 14.0: [8086: 0f35] type 00 class 0x0c0330
[0.321132] pci 0000: 00: 14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[0.321214] pci 0000: 00: 14.0: PME # supported from D3hot D3cold
[0.321496] pci 0000: 00: 1a.0: [8086: 0f18] type 00 class 0x108000
[0.321527] pci 0000: 00: 1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[0.321541] pci 0000: 00: 1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[0.321644] pci 0000: 00: 1a.0: PME # supported from D0 D3hot
[0.321912] pci 0000: 00: 1f.0: [8086: 0f1c] type 00 class 0x060100
[0.324100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) * 0, disabled.
[0.324490] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) * 0, disabled.
[0.324879] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) * 0, disabled.
[0.325268] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) * 0, disabled.
[0.325657] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) * 0, disabled.
[0.326047] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) * 0, disabled.
[0.326435] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) * 0, disabled.
[0.326822] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) * 0, disabled.
[0.331734] gpio gpiochip1: (INT33FC: 01): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[0.333666] gpio gpiochip2: (INT33FC: 02): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[0.352903] iommu: Default domain type: Translated
[0.352903] SCSI subsystem initialized
[0.352903] libata version 3.00 loaded.
[0.352903] pci 0000: 00: 02.0: vgaarb: setting as boot VGA device
[0.352903] pci 0000: 00: 02.0: vgaarb: VGA device added: decodes = io + mem, owns = io + mem, locks = none
[0.352903] pci 0000: 00: 02.0: vgaarb: bridge control possible
[0.352903] vgaarb: loaded
[0.352903] ACPI: bus type USB registered
[0.352903] usbcore: registered new interface driver usbfs
[0.352903] usbcore: registered new interface driver hub
[0.352903] usbcore: registered new device driver usb
[0.553638] pps_core: LinuxPPS API ver. 1 registered
[0.553642] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti<[email protected]>
[0.553661] PTP clock support registered
[0.553809] EDAC MC: Ver: 3.0.0
[0.553809] Registered efivars operations
[0.553809] PCI: Using ACPI for IRQ routing
[0.553809] PCI: pci_cache_line_size set to 64 bytes
[0.553809] Expanded resource Reserved due to conflict with PCI Bus 0000: 00
[0.553809] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[0.553809] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[0.553809] e820: reserve RAM buffer [mem 0x25231000-0x27ffffff]
[0.553809] e820: reserve RAM buffer [mem 0x260d4000-0x27ffffff]
[0.553809] e820: reserve RAM buffer [mem 0x7b753000-0x7bffffff]
[0.553809] e820: reserve RAM buffer [mem 0x7b9b4000-0x7bffffff]
[0.553809] e820: reserve RAM buffer [mem 0x7b9b7000-0x7bffffff]
[0.553809] e820: reserve RAM buffer [mem 0x7c800000-0x7fffffff]
[0.553809] e820: reserve RAM buffer [mem 0x7cc1f000-0x7fffffff]
[0.553809] e820: reserve RAM buffer [mem 0x7cd00000-0x7fffffff]
[0.553809] NetLabel: Initializing
[0.553809] NetLabel: domain hash size = 128
[0.553809] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[0.553809] NetLabel: unlabeled traffic allowed by default
[0.557446] clocksource: Switched to clocksource tsc-early
[0.601709] *** VALIDATE bpf ***
[0.601948] VFS: Disk quotas dquot_6.6.0
[0.601997] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[0.602067] *** VALIDATE ramfs ***
[0.602081] *** VALIDATE hugetlbfs ***
[0.602367] AppArmor: AppArmor Filesystem Enabled
[0.602473] pnp: PnP ACPI init
[0.602649] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[0.602887] system 00:01: [io 0x0680-0x069f] has been reserved
[0.602894] system 00:01: [io 0x0400-0x047f] has been reserved
[0.602899] system 00:01: [io 0x0500-0x05fe] has been reserved
[0.602904] system 00:01: [io 0x0600-0x061f] has been reserved
[0.602909] system 00:01: [io 0x164e-0x164f] has been reserved
[0.602926] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[0.603425] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[0.612135] pnp: PnP ACPI: found devices 3
[0.618744] thermal_sys: Registered thermal governor 'fair_share'
[0.618747] thermal_sys: Registered thermal governor 'bang_bang'
[0.618751] thermal_sys: Registered thermal governor 'step_wise'
[0.618753] thermal_sys: Registered thermal governor 'user_space'
[0.618755] thermal_sys: Registered thermal governor 'power_allocator'
[0.618920] pci_bus 0000: 00: resource 4 [io 0x0070-0x0077]
[0.618926] pci_bus 0000: 00: resource 5 [io 0x0000-0x006f window]
[0.618931] pci_bus 0000: 00: resource 6 [io 0x0078-0x0cf7 window]
[0.618936] pci_bus 0000: 00: resource 7 [io 0x0d00-0xffff window]
[0.618941] pci_bus 0000: 00: resource 8 [mem 0x000a0000-0x000bffff window]
[0.618945] pci_bus 0000: 00: resource 9 [mem 0x000c0000-0x000dffff window]
[0.618949] pci_bus 0000: 00: resource 10 [mem 0x000e0000-0x000fffff window]
[0.618955] pci_bus 0000: 00: resource 11 [mem 0x90c00000-0x90ffffff window]
[0.618959] pci_bus 0000: 00: resource 12 [mem 0x7cf00001-0x7ef00000 window]
[0.618964] pci_bus 0000: 00: resource 13 [mem 0x80000000-0x908ffffe window]
[0.618968] pci_bus 0000: 00: resource 14 [mem 0xfed40000-0xfed40fff window]
[0.619234] NET: Registered protocol family 2
[0.619767] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[0.619824] TCP established hash table entries: 16384 (order: 5, 131,072 bytes, linear)
[0.619967] TCP bind hash table entries: 16384 (order: 6, 262,144 bytes, linear)
[0.620082] TCP: Hash tables configured (established bind 16384 16384)
[0.620187] UDP hash table entries: 1024 (order: 3, 32,768 bytes, linear)
[0.620225] UDP-Lite hash table entries: 1024 (order: 3, 32,768 bytes, linear)
[0.620371] NET: Registered protocol family 1
[0.620388] NET: Registered protocol family 44
[0.620418] pci 0000: 00: 02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[0.620961] PCI: CLS 0 bytes, default 64
[0.621134] Trying to unpack rootfs image as initramfs ...
[1.372836] Initramfs unpacking failed: Decoding failed
[1.411763] Freeing initrd memory: 83356K
[1.411928] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440 795 214 178 ns
[1.411981] clocksource: Switched to clocksource tsc
[1.412213] check: Scanning for low memory corruption every 60 seconds
[1.419798] Initialise system trusted keyrings
[1.419825] Key type blacklist registered
[1.419943] workingset: timestamp_bits = 36 max_order = 19 bucket_order = 0
[1.425273] zbud: loaded
[1.426610] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[1.427279] fuse: init (API version 7.31)
[1.427345] *** VALIDATE fuse ***
[1.427350] *** VALIDATE fuse ***
[1.427747] Platform Keyring initialized
[1.442445] Key type asymmetric registered
[1.442448] Asymmetric key parser 'x509' registered
[1.442473] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[1.442633] io scheduler mq-deadline registered
[1.459742] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[1.459954] efifb: probing for efifb
[1.459995] efifb: showing boot graphics
[1.466686] efifb: framebuffer at 0x80000000, using 9000k, total 9000k
[1.466690] efifb: mode is 1920x1200x32, linelength = 7680, pages = 1
[1.466692] efifb: scrolling: redraw
[1.466696] efifb: Truecolor: size = 8: 8: 8: 8, shift = 24: 16: 8: 0
[1.466877] fbcon: Deferring console take-over
[1.466881] fb0: EFI VGA frame buffer device
[1.466914] intel_idle: MWAIT substates: 0x33000020
[1.466917] intel_idle: v0.4.1 model 0x37
[1.467640] intel_idle: lapic_timer_reliable_states 0xffffffff
[1.470363] ACPI: AC Adapter [ADP1] (off-line)
[1.470587] input: Lid Switch as / devices / LNXSYSTM: 00 / LNXSYBUS: 00 / PNP0C0D: 00 / input / input0
[1.470650] ACPI: Lid Switch [LID]
[1.479063] [Firmware Bug]: No valid trip found
[1.479723] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[1.491321] battery: ACPI: Battery Slot [BATC] (battery present)
[1.500005] 00:02: ttyS0 at I / O 0x3f8 (irq = 25, base_baud = 115200) is a 16550A
[1.509777] hpet: number irqs does not agree with number of timers
[1.509974] Linux agpgart interface v0.103
[1.570358] loop: module loaded
[1.590213] libphy: Fixed MDIO Bus: probed
[1.590217] tun: Universal TUN / TAP device driver, 1.6
[1.590394] PPP generic driver version 2.4.2
[1.590817] VFIO - User Level meta-driver version: 0.3
[1.591898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[1.591908] ehci-pci: EHCI PCI platform driver
[1.591948] ehci-platform: EHCI generic platform driver
[1.592011] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[1.592019] ohci-pci: OHCI PCI platform driver
[1.592044] ohci-platform: OHCI generic platform driver
[1.592076] uhci_hcd: USB Universal Host Controller Interface driver
[1.592496] xhci_hcd 0000: 00: 14.0: xHCI Host Controller
[1.592514] xhci_hcd 0000: 00: 14.0: new USB bus registered, assigned bus number 1
[1.593611] xhci_hcd 0000: 00: 14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[1.593620] xhci_hcd 0000: 00: 14.0: cache line size of 64 is not supported
[1.593993] usb usb1: New USB device found, idVendor = 1d6b, idProduct = 0002, bcdDevice = 5.04
[1.593999] usb usb1: New USB device strings: Mfr = 3, Product = 2, SerialNumber = 1
[1.594003] usb usb1: Product: xHCI Host Controller
[1.594007] usb usb1: Manufacturer: Linux 5.4.0-21-generic xhci-hcd
[1.594011] usb usb1: SerialNumber: 0000: 00: 14.0
[1.594511] hub 1-0: 1.0: USB hub found
[1.594542] hub 1-0: 1.0: 6 ports detected
[2.128716] xhci_hcd 0000: 00: 14.0: xHCI Host Controller
[2.128729] xhci_hcd 0000: 00: 14.0: new USB bus registered, assigned bus number 2
[2.128741] xhci_hcd 0000: 00: 14.0: Host supports USB 3.0 SuperSpeed
[2.129179] usb usb2: New USB device found, idVendor = 1d6b, idProduct = 0003, bcdDevice = 5.04
[2.129185] usb usb2: New USB device strings: Mfr = 3, Product = 2, SerialNumber = 1
[2.129189] usb usb2: Product: xHCI Host Controller
[2.129193] usb usb2: Manufacturer: Linux 5.4.0-21-generic xhci-hcd
[2.129197] usb usb2: SerialNumber: 0000: 00: 14.0
[2.129864] hub 2-0: 1.0: USB hub found
[2.129890] hub 2-0: 1.0: 1 port detected
[2.130447] i8042: PNP: No PS / 2 controller found.
[2.130952] mousedev: PS / 2 mouse device common for all mice
[2.131859] rtc_cmos 00:00: registered as rtc0
[2.131924] rtc_cmos 00:00: no alarms, 242 bytes nvram
[2.131947] i2c / dev entries driver
[2.133205] device-mapper: uevent: version 1.0.3
[2.133719] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
[2.133788] platform eisa.0: Probing EISA bus 0
[2.133810] platform eisa.0: EISA: Can not allocate resource for mainboard
[2.133815] platform eisa.0: Can not allocate resource for EISA slot 1
[2.133819] platform eisa.0: Can not allocate resource for EISA slot 2
[2.133823] platform eisa.0: Can not allocate resource for EISA slot 3
[2.133827] platform eisa.0: Can not allocate resource for EISA slot 4
[2.133831] platform eisa.0: Can not allocate resource for EISA slot 5
[2.133835] platform eisa.0: Can not allocate resource for EISA slot 6
[2.133839] platform eisa.0: Can not allocate resource for EISA slot 7
[2.133843] platform eisa.0: Can not allocate resource for EISA slot 8
[2.133847] platform eisa.0: EISA: Detected cards 0
[2.133857] intel_pstate: Intel P-state driver initializing
[2.135854] ledtrig-cpu: registered to indicate activity on CPUs
[2.135861] EFI Variables Facility v0.08 2004-May-17
[2.150706] drop_monitor: Initializing network drop monitor service
[2.151139] NET: Registered protocol family 10
[2.193311] Segment Routing with IPv6
[2.193388] NET: Registered protocol family 17
[2.194852] Key type dns_resolver registered
[2.197179] RAS: Correctable Errors collector initialized.
[2.197608] microcode: sig = 0x30678, pf = 0x2, revision = 0x838
[2.198175] microcode: Microcode Update Driver: v2.2.
[2.198187] IPI shorthand broadcast: enabled
[2.198212] sched_clock: Marking stable (2,197,338,391, 817 840) ->(2210921284, -12765053)
[2.199430] registered taskstats version 1
[2.199500] Loading compiled-in X.509 certificates
[2.208355] Loaded X.509 cert 'Build time autogenerated kernel key: fb48f4e7babb5816ebe6a7e3475f7bfd9691a0f2'
[2.208456] zswap: loaded using pool lzo / zbud
[2.210527] Key type ._fscrypt registered
[2.210531] Key type .fscrypt registered
[2.248543] Key type big_key registered
[2.248571] Key type trusted registered
[2.268555] Key type encrypted registered
[2.268569] AppArmor: AppArmor sha1 policy hashing enabled
[2.269669] integrity: Loading X.509 certificate: UEFI: db
[2.269764] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[2.269766] integrity: Loading X.509 certificate: UEFI: db
[2.269840] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[2.269842] integrity: Loading X.509 certificate: UEFI: db
[2.269886] integrity: Loaded X.509 cert 'Miix210C: 6cad7e397c4fc68f42a9f8c6283842ea'
[2.271563] ima: Allocated hash algorithm: sha1
[2.312470] ima: No architecture policies found
[2.312508] evm: Initialising EVM extended attributes:
[2.312511] evm: security.selinux
[2.312513] evm: security.SMACK64
[2.312514] evm: security.SMACK64EXEC
[2.312516] evm: security.SMACK64TRANSMUTE
[2.312517] evm: security.SMACK64MMAP
[2.312519] evm: security.apparmor
[2.312520] evm: security.ima
[2.312522] evm: security.capability
[2.312524] evm: HMAC attrs: 0x1
[2.313782] PM: Magic number: 12: 160: 99
[2.314531] rtc_cmos 00:00: setting system clock to 2020-03-31T22: 03: 53 UTC (1585692233)
[2.329293] Freeing unused decrypted memory: 2040K
[2.331607] Freeing unused kernel image memory: 2712K
[2.332217] Write protecting the kernel read-only data: 22528k
[2.334871] Freeing unused kernel image memory: 2008K
[2.336653] Freeing unused kernel image memory: 1200K
[2.368037] x86 / mm: Checked W + X mappings: passed, no W + X pages found.
[2.368593] x86 / mm: Checking user space page tables
[2.398865] x86 / mm: Checked W + X mappings: passed, no W + X pages found.
[2.398871] Run / init as init process
[2.463646] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[2.626080] usb 1-1: New USB device found, idVendor = 17ef, idProduct = 606e, bcdDevice = 0.10
[2.626096] usb 1-1: New USB device strings: Mfr = 1, Product = 2, SerialNumber = 0
[2.626111] usb 1-1: Product: Lenovo Miix March 1030 USB Keyboard
[2.626115] usb 1-1: Manufacturer: Lenovo
[2.637743] hidraw: raw HID events driver (C) Jiri Kosina
[2.658050] usbhid 1-1: 1.2: could not find an input interrupt endpoint
[2.658120] usbcore: registered new interface driver usbhid
[2.658123] usbhid: USB HID core driver
[2.667047] input: Lenovo Lenovo Miix March 1030 USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:17EF:606E.0001/input/input1
[2.721539] sdhci: Secure Digital Host Controller Interface driver
[2.721541] sdhci: Copyright (c) Pierre Ossman
[2.726417] hid-generic 0003: 17EF: 606E.0001: input, hidraw0: USB HID v1.10 Keyboard [Lenovo Lenovo Miix March 1030 USB Keyboard] on usb-0000: 00: 14.0-1 / input0
[2.727057] input: Lenovo Lenovo Miix March 1030 USB Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:17EF:606E.0002/input/input2
[2.727324] input: Lenovo Lenovo Miix March 1030 USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:17EF:606E.0002/input/ input3
[2.735358] i2c_hid i2c-ITE8568: 00: i2c-ITE8568: 00 supply vdd not found, using dummy regulator
[2.735397] i2c_hid i2c-ITE8568: 00: i2c-ITE8568: 00 supply vddl not found, using dummy regulator
[2.752608] mmc0: SDHCI controller on ACPI [80860F14: 01] using ADMA
[2.757761] mmc1: SDHCI controller on ACPI [INT33BB: 00] using ADMA
[2.776306] input: ITE8568: 00 103C: 184F Keyboard as /devices/platform/80860F41:00/i2c-0/i2c-ITE8568:00/0018:103C:184F.0003/input/input8
[2.778784] mmc2: SDHCI controller on ACPI [80860F14: 00] using ADMA
[2.783737] input: Lenovo Lenovo Miix March 1030 USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:17EF:606E.0002/input/ input4
[2.783910] input: Lenovo Lenovo Miix March 1030 USB Keyboard Wireless Radio Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:17EF:606E.0002/input / input5
[2.784415] input: ITE8568: 00 103C: 184F Consumer Control as /devices/platform/80860F41:00/i2c-0/i2c-ITE8568:00/0018:103C:184F.0003/input/input9
[2.786090] hid-generic 0018: 103C: 184F.0003: input, hidraw1: I2C HID v1.00 Keyboard [ITE8568: 00 103C: 184F] on i2c-ITE8568: 00
[2.786286] input: Lenovo Lenovo Miix March 1030 USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:17EF:606E.0002/input/input6
[2.786794] hid-generic 0003: 17EF: 606E.0002: input, hiddev0, hidraw2: USB HID v1.10 Mouse [Lenovo Lenovo Miix March 1030 USB Keyboard] on usb-0000: 00: 14.0-1 / input1
[2.799943] dw_dmac INTL9C60: 00: DesignWare DMA Controller, 8 channels
[2.804130] i2c_hid i2c-ELAN1001: 00: i2c-ELAN1001: 00 supply vdd not found, using dummy regulator
[2.804176] i2c_hid i2c-ELAN1001: 00: i2c-ELAN1001: 00 supply vddl not found, using dummy regulator
[2.814511] mmc1: new SDIO card at address 0001
[2.839962] dw_dmac INTL9C60: 01: DesignWare DMA Controller, 8 channels
[2.864543] cryptd: max_cpu_qlen set to 1000
[2.894978] SSE version of gcm_enc / dec engaged.
[2.955834] checking generic (80000000 8ca000) vs hw (80000000 10000000)
[2.955838] fb0: switching to inteldrmfb from EFI VGA
[2.956073] i915 0000: 00: 02.0: vgaarb: deactivate vga console
[2.956238] [drm] Supports vblank timestamp caching Rev 2 (10.21.2013).
[2.956240] [drm] Driver supports precise vblank timestamp query.
[2.956383] [drm: intel_bios_init [i915]] * ERROR * Invalid sequence block (header)
[2.958160] i915 0000: 00: 02.0: vgaarb: changed VGA decodes: olddecodes = io + mem, decodes = io + mem: owns = io + mem
[2.999169] [drm] Initialized i915 1.6.0 20190822 for 0000: 00: 02.0 on minor 0
[3.003012] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[3.004003] input: Video Bus as / devices / LNXSYSTM: 00 / LNXSYBUS: 00 / PNP0A08: 00 / LNXVIDEO: 00 / input / input10
[3.004247] [drm] HDaudio controller not detected, using LPE audio instead
[3.052084] mmc2: new HS200 MMC card at address 0001
[3.052826] mmcblk2: mmc2: 0001 SDW64G 58.2 GiB
[3.053179] mmcblk2boot0: mmc2: 0001 SDW64G partition 1 4.00 MiB
[3.053514] mmcblk2boot1: mmc2: 0001 SDW64G partition 2 4.00 MiB
[3.053696] mmcblk2rpmb: mmc2: 0001 SDW64G partition 3 4.00 MiB, chardev (239: 0)
[3.057700] mmcblk2: p1 p2 p3 p4 p5 p6
[3.112357] fbcon: i915drmfb (fb0) is primary device
[3.112360] fbcon: Deferring console take-over
[3.112369] i915 0000: 00: 02.0: fb0: i915drmfb frame buffer device
[3.144916] mmc0: new high speed SDXC card at address 59b4
[3.145593] mmcblk0: mmc0: 59b4 58.9 GiB
[3.161465] mmcblk0: p1
[3.207637] input: ELAN1001: 00 04F3: 2057 Touchscreen as /devices/platform/80860F41:03/i2c-3/i2c-ELAN1001:00/0018:04F3:2057.0004/input/input11
[3.207978] input: ELAN1001: 00 04F3: 2057 as /devices/platform/80860F41:03/i2c-3/i2c-ELAN1001:00/0018:04F3:2057.0004/input/input12
[3.208184] input: ELAN1001: 00 04F3: 2057 as /devices/platform/80860F41:03/i2c-3/i2c-ELAN1001:00/0018:04F3:2057.0004/input/input13
[3.208649] hid-generic 0018: 04F3: 2057.0004: input, hidraw3: I2C HID v1.00 Device [ELAN1001: 00 04F3: 2057] on i2c-ELAN1001: 00
[4.083470] raid6: sse2x4 gen () 1091 MB / s
[4.131478] raid6: sse2x4 xor () 1168 MB / s
[4.179481] raid6: sse2x2 gen () 981 MB / s
[4.227463] raid6: sse2x2 xor () 2164 MB / s
[4.275472] raid6: sse2x1 gen () 1151 MB / s
[4.323466] raid6: sse2x1 xor () 1819 MB / s
[4.323469] raid6: using algorithm sse2x1 gen () 1151 MB / s
[4.323470] raid6: .... xor () 1819 MB / s, rmw enabled
[4.323472] raid6: using ssse3x2 recovery algorithm
[4.335090] xor: measuring software checksum speed
[4.371931] prefetch64-sse: 7353.000 MB / sec
[4.411856] generic_sse: 6315.000 MB / sec
[4.411858] xor: using function: prefetch64-sse (7353.000 MB / sec)
[4.466711] Btrfs loaded, crc32c = crc32c-intel
[4.832207] EXT4-fs (mmcblk2p5): mounted filesystem with ordered data mode. Opts: (null)
[5.363236] systemd [1]: Inserted module 'autofs4'
[5.428021] systemd [1]: systemd 245.2-1ubuntu2 running in system mode. (+ PAM + AUDIT + SELINUX + IMA + APPARMOR + SMACK + SYSVINIT + UTMP + LIBCRYPTSETUP + GCRYPT + GNUTLS + ACL + XZ + LZ4 + SECCOMP + BLKID + ELFUTILS + KMOD + IDN2 -IDN + PCRE2 default-hierarchy = hybrid)
[5.448542] systemd [1]: Detected architecture x86-64.
[5.476070] systemd [1]: Set hostname to<tablet-80hv>.
[5.769462] systemd [1]: /lib/systemd/system/dbus.socket:5: ListenStream = references a path below legacy directory / var / run /, updating / var / run / dbus / system_bus_socket в†’ / run / dbus / system_bus_socket; please update the unit file accordingly.
[5.973107] systemd [1]: Created slice system-modprobe.slice.
[5.974039] systemd [1]: Created slice system-systemd \ x2dfsck.slice.
[5.974786] systemd [1]: Created slice User and Session Slice.
[5.975038] systemd [1]: Started Forward Password Requests to Wall Directory Watch.
[5.975777] systemd [1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[5.975940] systemd [1]: Reached target User and Group Name Lookups.
[5.975992] systemd [1]: Reached target Remote File Systems.
[5.976031] systemd [1]: Reached target Slices.
[5.976365] systemd [1]: Listening on Device-mapper event daemon FIFOs.
[5.976726] systemd [1]: Listening on LVM2 poll daemon socket.
[5.977023] systemd [1]: Listening on Syslog Socket.
[5.977323] systemd [1]: Listening on fsck to fsckd communication Socket.
[5.977506] systemd [1]: Listening on initctl Compatibility Named Pipe.
[5.978161] systemd [1]: Listening on Journal Audit Socket.
[5.978482] systemd [1]: Listening on Journal Socket (/ dev / log).
[5.978905] systemd [1]: Listening on Journal Socket.
[5.979275] systemd [1]: Listening on udev Control Socket.
[5.979587] systemd [1]: Listening on udev Kernel Socket.
[5.982826] systemd [1]: Mounting Huge Pages File System ...
[5.986396] systemd [1]: Mounting POSIX Message Queue File System ...
[5.990585] systemd [1]: Mounting Kernel Debug File System ...
[5.994899] systemd [1]: Mounting Kernel Trace File System ...
[6.000901] systemd [1]: Starting Journal Service ...
[6.005060] systemd [1]: Starting Availability of block devices ...
[6.009514] systemd [1]: Starting Set the console keyboard layout ...
[6.013515] systemd [1]: Starting Create list of static device nodes for the current kernel ...
[6.017337] systemd [1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling ...
[6.017481] systemd [1]: Condition check resulted in Load Kernel Module drm being skipped.
[6.018860] systemd [1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[6.019023] systemd [1]: Condition check resulted in File System Check on Root Device being skipped.
[6.029925] systemd [1]: Starting Load Kernel Modules ...
[6.033837] systemd [1]: Starting Remount Root and Kernel File Systems ...
[6.037920] systemd [1]: Starting udev Coldplug all Devices ...
[6.041956] systemd [1]: Starting Uncomplicated firewall ...
[6.056967] systemd [1]: Mounted Huge Pages File System.
[6.059219] systemd [1]: Mounted POSIX Message Queue File System.
[6.060953] systemd [1]: Mounted Kernel Debug File System.
[6.062722] systemd [1]: Mounted Kernel Trace File System.
[6.066187] systemd [1]: Finished Availability of block devices.
[6.070108] systemd [1]: Finished Create list of static device nodes for the current kernel.
[6.073842] systemd [1]: Finished Uncomplicated firewall.
[6.089760] EXT4-fs (mmcblk2p5): re-mounted. Opts: (null)
[6.096154] systemd [1]: Finished Remount Root and Kernel File Systems.
[6.097714] systemd [1]: Condition check resulted in Rebuild Hardware Database being skipped.
[6.101231] systemd [1]: Starting Load / Save Random Seed ...
[6.105218] systemd [1]: Starting Create System Users ...
[6.126570] lp: driver loaded but no devices found
[6.150704] ppdev: user-space parallel port driver
[6.180019] systemd [1]: Finished Load Kernel Modules.
[6.186381] systemd [1]: Mounting FUSE Control File System ...
[6.190516] systemd [1]: Mounting Kernel Configuration File System ...
[6.194707] systemd [1]: Starting Apply Kernel Variables ...
[6.197388] systemd [1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[6.220766] systemd [1]: Finished Load / Save Random Seed.
[6.224714] systemd [1]: Mounted FUSE Control File System.
[6.242153] systemd [1]: Finished Create System Users.
[6.244661] systemd [1]: Mounted Kernel Configuration File System.
[6.251973] systemd [1]: Starting Create Static Device Nodes in / dev ...
[6.293831] systemd [1]: Finished Create Static Device Nodes in / dev.
[6.299296] systemd [1]: Starting udev Kernel Device Manager ...
[6.301638] systemd [1]: Finished Apply Kernel Variables.
[6.449770] systemd [1]: Finished Set the console keyboard layout.
[6.450286] systemd [1]: Reached target Local File Systems (Pre).
[6.546879] systemd [1]: Finished udev Coldplug all Devices.
[6.558990] systemd [1]: Started udev Kernel Device Manager.
[6.567424] systemd [1]: Starting Show Plymouth Boot Screen ...
[6.600707] systemd [1]: plymouth-start.service: Succeeded.
[6.602230] systemd [1]: Started Show Plymouth Boot Screen.
[6.602741] systemd [1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[6.603262] systemd [1]: Started Forward Password Requests to Plymouth Directory Watch.
[6.603341] systemd [1]: Reached target Local Encrypted Volumes.
[7.169345] systemd [1]: Started Journal Service.
[7.217578] systemd-journald [396]: Received client request to flush runtime journal.
[7.680813] 80860F0A: 00: ttyS4 at MMIO 0x9091b000 (irq = 17, base_baud = 2,764,800) is a 16550A
[7.681019] serial serial0: tty port ttyS4 registered
[7.699990] 80860F0A: 01: ttyS5 at MMIO 0x9091d000 (irq = 18, base_baud = 2,764,800) is a 16550A
[7.776002] bmc150_accel_i2c i2c-BMA250E: 00: mounting matrix not found: using identity ...
[7.805599] int3401 thermal INT3401: 00: Creating sysfs group for PROC_THERMAL_PLATFORM_DEV
[7.827689] Bluetooth: Core ver 2.22
[7.827733] NET: Registered protocol family 31
[7.827735] Bluetooth: HCI device and connection manager initialized
[7.827744] Bluetooth: HCI socket layer initialized
[7.827748] Bluetooth: L2CAP socket layer initialized
[7.827759] Bluetooth: SCO socket layer initialized
[7.929320] Bluetooth: HCI UART driver ver 2.3
[7.929325] Bluetooth: HCI UART protocol H4 registered
[7.929327] Bluetooth: HCI UART protocol BCSP registered
[7.929362] Bluetooth: HCI UART protocol LL registered
[7.929364] Bluetooth: HCI UART protocol ATH3K registered
[7.929574] Bluetooth: HCI UART protocol Three-wire (H5) registered
[7.929699] Bluetooth: HCI UART protocol Intel registered
[7.929872] Bluetooth: HCI UART protocol Broadcom registered
[7.929898] Bluetooth: HCI UART protocol QCA registered
[7.929900] Bluetooth: HCI UART protocol AG6XX registered
[7.929927] Bluetooth: HCI UART protocol Marvell registered
[8.074297] asus_wmi: ASUS WMI generic driver loaded
[8.090789] asus_wmi: ASUS Management GUID not found
[8.264279] intel_sst_acpi 80860F28: 00: Detected Baytrail-CR platform
[8.264495] intel_sst_acpi 80860F28: 00: LPE base: 0x90a00000 size: 0x200000
[8.264499] intel_sst_acpi 80860F28: 00: IRAM base: 0x90ac0000
[8.264609] intel_sst_acpi 80860F28: 00: DRAM base: 0x90b00000
[8.264622] intel_sst_acpi 80860F28: 00: SHIM base: 0x90b40000
[8.264633] intel_sst_acpi 80860F28: 00: Mailbox base: 0x90b44000
[8.264642] intel_sst_acpi 80860F28: 00: DDR base: 0x20000000
[8.283196] intel_sst_acpi 80860F28: 00: Got drv data max stream 25
[8.334530] input: ELAN1001: 00 04F3: 2057 as /devices/platform/80860F41:03/i2c-3/i2c-ELAN1001:00/0018:04F3:2057.0004/input/input15
[8.334877] input: ELAN1001: 00 04F3: 2057 UNKNOWN as /devices/platform/80860F41:03/i2c-3/i2c-ELAN1001:00/0018:04F3:2057.0004/input/input16
[8.335167] input: ELAN1001: 00 04F3: 2057 UNKNOWN as /devices/platform/80860F41:03/i2c-3/i2c-ELAN1001:00/0018:04F3:2057.0004/input/input17
[8.336965] hid-multitouch 0018: 04F3: 2057.0004: input, hidraw3: I2C HID v1.00 Device [ELAN1001: 00 04F3: 2057] on i2c-ELAN1001: 00
[8.579800] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[8.602968] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[8.607152] Bluetooth: hci0: RTL: examining hci_ver = 06 hci_rev = 000b lmp_ver = 06 lmp_subver = 8723
[8.611463] Bluetooth: hci0: RTL: rom_version status = 0 version = 1
[8.611500] Bluetooth: hci0: RTL: loading rtl_bt / rtl8723bs_fw.bin
[8.614700] Bluetooth: hci0: RTL: loading rtl_bt / rtl8723bs_config-OBDA8723.bin
[8.619754] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[8.620797] r8723bs: module verification failed: signature and / or required key missing - tainting kernel
[8.623624] RTL8723BS: module init start
[8.623629] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[8.623631] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[8.643613] Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508
[8.666394] pnetdev = 00000000252d612f
[8.785231] RTL8723BS: rtw_ndev_init (wlan0)
[8.785888] RTL8723BS: module init ret = 0
[8.806663] Adding 2097148k swap on / dev / mmcblk2p6. Priority: -2 extents: 1 across: 2097148k SSFS
[9.279912] audit: type = 1400 audit (1585692240.463: 2): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "ippusbxd" pid = 640 comm = "apparmor_parser"
[9.282940] audit: type = 1400 audit (1585692240.463: 3): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "/ usr / sbin / haveged" pid = 641 comm = "apparmor_parser"
[9.285383] audit: type = 1400 audit (1585692240.467: 4): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "/ usr / sbin / tcpdump" pid = 642 comm = "apparmor_parser"
[9.289039] audit: type = 1400 audit (1585692240.471: 5): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "/ usr / sbin / cups-browsed" pid = 639 comm = "apparmor_parser"
[9.289714] audit: type = 1400 audit (1585692240.471: 6): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "libreoffice-xpdfimport" pid = 643 comm = "apparmor_parser"
[9.292451] audit: type = 1400 audit (1585692240.475: 7): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "libreoffice-oopslash" pid = 644 comm = "apparmor_parser"
[9.308180] audit: type = 1400 audit (1585692240.487: 8): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "/ usr / bin / man" pid = 645 comm = "apparmor_parser"
[9.308194] audit: type = 1400 audit (1585692240.487: 9): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "man_filter" pid = 645 comm = "apparmor_parser"
[9.308203] audit: type = 1400 audit (1585692240.487: 10): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "man_groff" pid = 645 comm = "apparmor_parser"
[9.310750] audit: type = 1400 audit (1585692240.491: 11): apparmor = "STATUS" operation = "profile_load" profile = "unconfined" name = "libreoffice-senddoc" pid = 648 comm = "apparmor_parser"
[9.412880] Bluetooth: hci0: RTL: fw version 0x365d462e
[9.528519] intel_rapl_common: Found RAPL domain package
[9.528523] intel_rapl_common: Found RAPL domain core
[9.665341] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.1.auto/input/input19
[9.667890] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.2.auto/input/input20
[10.254363] bytcr_rt5640 bytcr_rt5640: quirk IN3_MAP enabled
[10.254368] bytcr_rt5640 bytcr_rt5640: quirk realtek, jack-detect-source 2
[10.254372] bytcr_rt5640 bytcr_rt5640: quirk realtek, over-current-threshold-microamp 2000
[10.254375] bytcr_rt5640 bytcr_rt5640: quirk realtek, over-current-scale-factor 1
[10.254378] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[10.254380] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF2 enabled
[10.254383] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[10.289428] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai<->media-cpu-dai mapping ok
[10.289963] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai<->deepbuffer-cpu-dai mapping ok
[10.335681] bytcr_rt5640 bytcr_rt5640: rt5640-aif2<->ssp0-port mapping ok
[10.358846] input: bytcr-rt5640 Headset as / devices / platform / 80860F28: 00 / bytcr_rt5640 / sound / card0 / input21
[11.406887] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[11.406891] Bluetooth: BNEP filters: protocol multicast
[11.406900] Bluetooth: BNEP socket layer initialized
[11.527208] NET: Registered protocol family 38
[11.938633] Bluetooth: RFCOMM TTY layer initialized
[11.938653] Bluetooth: RFCOMM socket layer initialized
[11.938667] Bluetooth: RFCOMM ver 1.11
[13.143174] rtl8723bs: acquire FW from file: rtlwifi / rtl8723bs_nic.bin
[16.856335] intel_sst_acpi 80860F28: 00: FW Version 01.0c.00.01
[17.278209] RTL8723BS: rtw_set_802_11_connect (wlan0) fw_state = 0x00000008
[17.336860] RTL8723BS: start auth
[17.342688] RTL8723BS: auth success, start assoc
[17.346907] RTL8723BS: rtw_cfg80211_indicate_connect (wlan0) BSS not found !!
[17.346922] RTL8723BS: assoc success
[17.350799] RTL8723BS: send eapol packet
[17.359677] RTL8723BS: send eapol packet
[17.359965] RTL8723BS: set pairwise key camid: 4, addr: 74: da: 88: 65: 69: 72, kid: 0, type: AES
[17.360281] IPv6: ADDRCONF (NETDEV_CHANGE): wlan0: link becomes ready
[17.362569] RTL8723BS: set group key camid: 5, addr: 74: da: 88: 65: 69: 72, kid: 1, type: AES
[34.731022] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Module Size Used by
81920 rfcomm 2
cmac 16384 3
algif_hash 16384 1
algif_skcipher 16384 1
af_alg 24576 6 algif_hash, algif_skcipher
24576 bnep 2
40960 snd_soc_sst_bytcr_rt5640 2
mei_hdcp 24576 0
gpio_keys 20480 0
intel_rapl_msr 20480 0
16384 nls_iso8859_1 2
intel_soc_dts_thermal 20480 0
intel_powerclamp 20480 0
coretemp 20480 0
kvm_intel 286 720 0
1 663 552 kvm kvm_intel
punit_atom_debug 16384 0
intel_cstate 20480 0
r8723bs 573 440 0
cfg80211 704 512 1 r8723bs
snd_sof_acpi 20480 0
snd_sof_intel_byt 20480 1 snd_sof_acpi
snd_sof_intel_ipc 20480 1 snd_sof_intel_byt
snd_sof 106496 3 snd_sof_acpi, snd_sof_intel_byt, snd_sof_intel_ipc
snd_sof_xtensa_dsp 16384 1 snd_sof_acpi
ledtrig_audio 16384 1 snd_sof
snd_soc_rt5670 155 648 0
snd_soc_rt5651 102400 0
snd_soc_rt5645 172 032 0
snd_intel_sst_acpi 20480 1
snd_intel_sst_core 61440 1 snd_intel_sst_acpi
snd_soc_sst_atom_hifi2_platform 110592 2 snd_intel_sst_core
snd_soc_rt5640 143360 2 snd_soc_sst_bytcr_rt5640
snd_soc_acpi_intel_match 32768 2 snd_sof_acpi, snd_intel_sst_acpi
snd_soc_acpi 16384 4 snd_soc_sst_bytcr_rt5640, snd_sof_acpi, snd_soc_acpi_intel_match, snd_intel_sst_acpi
snd_soc_rl6231 20480 4 snd_soc_rt5651, snd_soc_rt5670, snd_soc_rt5640, snd_soc_rt5645
hid_multitouch 28672 0
snd_soc_core 245760 7 snd_soc_rt5651, snd_soc_sst_bytcr_rt5640, snd_sof, snd_soc_rt5670, snd_soc_rt5640, snd_soc_sst_atom_hifi2_platform, snd_soc_rt5645
snd_compress 24576 1 snd_soc_core
joydev 24576 0
input_leds 16384 0
ac97_bus 16384 1 snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
asus_wmi 32768 0
wmi_bmof 16384 0
snd_pcm 106496 9 snd_soc_rt5651, snd_soc_sst_bytcr_rt5640, snd_sof, snd_soc_rt5670, snd_soc_rt5640, snd_soc_sst_atom_hifi2_platform, snd_soc_core, snd_soc_rt5645, snd_pcm_dmaengine
sparse_keymap 16384 1 asus_wmi
mei_txe 28672 1
snd_seq_midi 20480 0
snd_seq_midi_event 16384 1 snd_seq_midi
mei 106496 3 mei_hdcp, mei_txe
snd_rawmidi 36864 1 snd_seq_midi
hci_uart 126 976 0
btqca 20480 1 hci_uart
btrtl 24576 1 hci_uart
snd_seq 69632 2 snd_seq_midi, snd_seq_midi_event
mac_hid 16384 0
btbcm 16384 1 hci_uart
btintel 24576 1 hci_uart
bluetooth 581 632 32 btrtl, btqca, btintel, hci_uart, btbcm, bnep, rfcomm
bmc150_accel_spi 16384 0
snd_seq_device 16384 3 snd_seq, snd_seq_midi, snd_rawmidi
snd_timer 36864 2 snd_seq, snd_pcm
processor_thermal_device 24576 0
soc_button_array 20480 0
int3406_thermal 16384 0
dptf_power 16384 0
intel_rapl_common 24576 2 intel_rapl_msr, processor_thermal_device
ecdh_generic 16384 2 bluetooth
int3403_thermal 16384 0
int3400_thermal 20480 0
int340x_thermal_zone 16384 2 int3403_thermal, processor_thermal_device
ecc 28672 1 ecdh_generic
intel_soc_dts_iosf 20480 2 intel_soc_dts_thermal, processor_thermal_device
acpi_thermal_rel 16384 1 int3400_thermal
bmc150_accel_i2c 16384 0
bmc150_accel_core 32768 2 bmc150_accel_spi, bmc150_accel_i2c
intel_int0002_vgpio 16384 1
snd 13 90112 snd_seq, snd_soc_sst_bytcr_rt5640, snd_seq_device, snd_timer, snd_compress, snd_soc_sst_atom_hifi2_platform, snd_soc_core, snd_pcm, snd_rawmidi
industrialio_triggered_buffer 16384 1 bmc150_accel_core
kfifo_buf 16384 1 industrialio_triggered_buffer
industrialio 73728 3 industrialio_triggered_buffer, kfifo_buf, bmc150_accel_core
acpi_pad 184320 0
soundcore 16384 1 snd
8250_dw 16384 0
sch_fq_codel 20480 5
parport_pc 40960 0
ppdev 24576 0
lp 20480 0
parport 53248 3 parport_pc, lp, ppdev
ip_tables 32768 0
x_tables 40960 1 ip_tables
45056 autofs4 2
btrfs 1245184 0
xor 24576 1 btrfs
zstd_compress 167936 1 btrfs
raid6_pq 114,688 1 btrfs
libcrc32c 16384 1 btrfs
dm_mirror 24576 0
dm_region_hash 20480 1 dm_mirror
dm_log 20480 2 dm_region_hash, dm_mirror
crct10dif_pclmul 16384 1
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
1,986,560 i915 4
mmc_block 49152 7
aesni_intel 372736 4
i2c_algo_bit 16384 1 i915
crypto_simd 16384 1 aesni_intel
drm_kms_helper 184320 1 i915
cryptd 24576 3 crypto_simd, ghash_clmulni_intel
syscopyarea 16384 1 drm_kms_helper
glue_helper 16384 1 aesni_intel
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 491520 7 drm_kms_helper, i915
lpc_ich 24576 0
wmi 32768 2 asus_wmi, wmi_bmof
video 49152 3 asus_wmi, int3406_thermal, i915
16384 dw_dmac 2
dw_dmac_core 28672 1 dw_dmac
i2c_hid 28672 0
sdhci_acpi 24576 0
sdhci 65536 1 sdhci_acpi
hid_generic 16384 0
usbhid 57344 0
hid 131072 4 i2c_hid, usbhid, hid_multitouch, hid_generic



Rep: (80)
* Allmint , Um.
And in alsamixer if different channels to see? Ucm files in place?



Rep: (0)
* laert00, Folder bytcr-rt5640 is in the / usr / share / alsa / ucm.

In alsamixer honestly I do not know where to look, I'm in the right, and flipped through the channels where tens if not hundreds.

Sorry if something goes wrong, I just installed Linux for the first time a week ago and it is not very versed in all of this: a
Attached Image
Attached Image



Rep: (80)
* Allmint , First locate the master channel and check that would not mute.



Rep: (0)
* laert00, channel master there.



Rep: (4)
How to set to boot from USB in the BIOS. I can not postvil. Worth fedora. Flash threw Lubuntu. I put, when loading only the choice of three types of fedora. What to do then?



Rep: (0)
* laert00, decided to try it in live-mode, a different version - 19.10 - and bang, the sound is there, but got out when you install this: (See attachments.).
Attached Image

The 'grub-efi-ia32' package failed to load into / target /. Without the GRUB boot loader, the installed system will not boot.
Those. the aforesaid package is not loaded in the target folder, and it will not open properly installed system, right?
I tried to solve the problem through the terminal, and he gave me a grub-install: error: failed to get canonical path of '/ cow'.
Cow? What is this "cow", which he can not find it? : D
Forgive my dullness, I'm not a programmer, but I like a Linux more Windows 10, and ask for advice can only reasonable here.

Attached images
Attached Image
Attached Image
Attached Image


Post has been editedLyzavta - 02.04.20, 19:23



Rep: (80)
* Lyzavta In the cap there is an instruction to that effect

LINUX on UEFI 32bit (Post laert00 # 92094985)

Post has been editedlaert00 - 02.04.20, 22:26



Rep: (0)
* laert00, I tried to do on your instructions, but sometimes works as a TAB Enter (lowered down to the line), and sometimes got out is not something that should have been. See photos:
Attached Image

(Sm.Spoyler)

Attached images
Attached Image
Attached Image


Post has been editedLyzavta - 03.04.20, 18:38
Reason for edit: Er



Rep: (0)
* laert00, then I decided for the sake of interest include tablet again, but without the stick, and the impression that she oper.sistema not even established until the end.
Attached Image



Rep: (80)
* Lyzavta Really it looks like is not got the boot loader.
Judging from the first screenshot, the installation runs the standard without the -b option


Full version    

Help     rules

Time is now: 17/08/20, 11:07