Assistant
| REPLY |
 Smartlabs SML-482 HD Base (Rostelecom) [Other OS] | [IPTV] [STB] [BCM7230] |
Message#1  01.10.14, 00:53 | |||||||||
Android be with you  [offline] Group: Honorary Gameday Messages 5038 Check in: 19.09.10 Xiaomi Mi Max 3 4/64 Reputation:  897  | DiscussionSmartlabs SML-482 HD Base IPTV STB-STB Discussion | Breaker
Specifications SML-482 HD Base - manufacturer's website Description The subscriber set-top box of the new generation SML-482 HD Base is a powerful device with which the subscribers of digital television operators can get access to ultra-modern interactive services.High performance STB provides ample opportunities for the development of the graphical interface, as well as to support more advanced audio and video codecs. All this allows to significantly increase customer satisfaction and improve the perception of services by the audience of the operator. Key benefits High performance The device architecture is built on a new, more powerful chipset. In addition, the device is equipped with a modern dual-core processor and twice as large (512 MB) of RAM. The prefix of the new generation is 3 times higher than its predecessors in terms of performance. Increased processor power provides a smoother and faster interface even “on top” of HD content with high bitrate, as well as almost instant image loading due to an increase in decompression speed. Improved interface The new level of performance and the use of OpenGL technology allow you to support a more advanced and resource-intensive, including three-dimensional, user interface. Now users can enjoy more detailed and interesting graphics, which may include fully three-dimensional interface components, with a general increase in the speed of the console. The improved interface will help improve the overall quality of the service and offer subscribers the same level of convenience and visual appeal than the world leaders in this field - Sony Playstation, AppleTV, Microsoft xBox. Full HD image The console maintains the highest image quality up to Full HD, while it is able to flexibly monitor the bandwidth of the Internet channel to instantly optimize the quality and size of the image on the screen. Integration of third-party applications The presence of a powerful hardware platform made it possible to create a software infrastructure for writing and embedding third-party applications into the device. For these purposes, the globally recognized standard API of the HBBtv consortium is used. Based on it, popular applications such as polls, entertainment games, sports bulletins and much more can be implemented. Elegant design The body of the console has become more compact, it is made of high-quality translucent plastic. In some versions, the front panel of the device will be equipped with a LED display to display the time. Technical details Chipset BCM7230 750MHz dual-core (2000DMIPS) Ram DDR3 512 MB Flash nand 256 MB IrDA receiver there is Sizes (W * D * H), mm 100*100*32 The weight of the main device, 140 USB 2.0 Host back there is USB 2.0 Host Side option Ethernet 10 / 100Mbit Base T there is CVBS (mini-jack) there is HDMI 1.4a with HDCP there is Analog stereo audio output (mini-jack) there is Optical S / PDIF option Content Protection:
A photo   S / N revision difference Without disassembling the console how to determine the audit and the presence of WiFi?
How to recognize the type of console by serial number: 31D01- with WIFI with SPI 31D00- without WIFI but with SPI 32D00 - without WIFI but with SPI 33D00 - without WIFI and without SPI Official firmware Rostelecom + WINK Baltcom tv Custom firmware Rostelecom + WINK AllChan + VOD 5.22943.181029 AllChan + VOD 5.21586.180601 AllChan + VOD 5.21342.180503 Instructions Detailed instructions Firmware for TV versions 1.0 and 2.0 (For beginners: the flash drive should be slightly 4gb and formatted by the program SDFORMATTER) in fat32 (For beginners: the flash drive should be slightly 4gb and formatted by the program SDFORMATTER) in fat32 We connect the usb-uart-ttl console cable and configure Putty, com port speed 115200 1. We dump files on the USB flash drive: For SPI Download archive bootstrap.bin sysinit.txt rootfs start.sh kernel.bin Without SPI Download archive bootstrap_2.bin sysinit2.txt rootfs start.sh 2. Turn on the console 3. Immediately after the reboot (you can even in advance), we start pressing Ctrl + I until the message appears ****************************************** System initialization forced via Ctrl-I ****************************************** 4. After Ctrl-I, we closely monitor the download log, and as soon as such a menu appears ================================================== 1. Boot from NFS share 2. Boot from FLASH memory 3. Force upgrade with any firmware 4. Erase "env" partition and reboot 0. Stop booting R. Reboot Press [012] to change rootfs source: 5. Quickly click: 0 6. We are waiting for the invitation to login: sml723x-E427XXXXXXXXX login: 7. Enter root login: root 7.1. Check the rootfs section: cat / proc / mtd 7.2. If the section "rootfs" is not, then you need to copy the file on a flash drive with the name "sysinit2.txt" and rename it to "sysinit.txt" and repeat all actions with n 2. In this case, in paragraph 2 of the sysinit.txt file, another one of its own bootstarp2.bin will automatically start 8. Mount the flash drive: mkdir / tmp / sda; mount `ls -t / dev / sd * | tail -n1` / tmp / sda; cd / tmp / sda; ls 9. We are stitching the kernel: dd if = kernel.bin of = / dev / mtdblock8 10. ROOTFS firmware: sh start.sh waiting for the inscriptionSTB UPGRADE DONE! and restart the console 11. reboot: reboot How to remove channels from the list LIME LIME Review LIME firmware Optima.hr (OptiTV) Caucasus We are looking for subscribers with working consoles to study and upgrade the firmware. Refer to Bannedmi Caucasus Overview Caucasus firmware ELTEX Full dump of all sections of the firmware ELTEX Overview Eltex NV-300 firmware review Watch on SML-482 Middleware Stalker Review on SML-482 Overview IPTVPortal on SML-482SD channelsand HD ������ downloadELTEX NV-300 firmware Modifications ELTEX NV-300 MTS MTS firmware MTS instructions FREGAT FREGAT Overview Firmware MOYO TV Spuln firmware video review with established channels from CAMRU firmware MOYO.TV + verimatrix by konsul_81 For developers Manual for customization and assembly of firmware Eltex NV-300 Additional Wi-Fi device drivers for the kernel IPTV Console Emulator Decompiler / compiler of resources QT + bonus from a respected dimana90 Editor / unpacker / viewer of qt-resources (binary * .rcc) from mamawax Disassembling / building firmware on Linux Loading root filesystem from nfs balls (linux) We start Debian on the console Blocks from nv-310 Rocking firmware Utility for disassembly / editing / assembly * img, * cramfs, * jffs2 Connection, Restoration and Modifications How to restore a brick without spi TV 1.0 setup example via WI-FI Connecting to set-top boxes via RS232 COM112 Connecting the console through the UART Restoration of "brick" improvised means A simple way to repair a brick! Installing a second USB socket Video SPI Chip Installation Instructions Recovery CFE. for SPI consoles only Useful M3U 2 SMLBOX.TK fromBannedmi If the LAN died on the console Rewind the sound on the console, for version 5.21342.180503 PIN recovery Rostelecom, or for those who want manually learn If WiFi settings are not saved Error 206. Solution What WiFi adapters are suitable for the console?read Turning on the set-top box on TV channel 1, instead of the HDMI input NAND CS2 switch, factory loader Remote for Android with IR We register the smlbox.tk portal in the uart-ttl terminal Useful information for those returning (returning) from Eltex to MoyoTV or RT. Instructions on firmware SML-482 on Wink (Rostelecom) Instructions on firmware SML-482 on Baltcom.lv Check and obtain the current software version number New RT logo Navigator for "Dummies " A set of instructions in a readable form. Video tutorial firmware for super dummies CFE entry on SL-IPTV002_105_8 model boxes Prefixes with and without SPI+ Differences without opening Prefixes 1.0 or 2.0 Setup, preparation, firmware PuTTY. SETTING IN PICTURES Console cables (adapters) for connecting to the console Universal firmware manual (For beginners: the flash drive should be slightly 4gb and formatted by the program SDFORMATTER) in fat32 (For beginners: the flash drive should be slightly 4gb and formatted by the program SDFORMATTER) in fat32 We connect the uart usb-ttl console cable and configure Putty, com port speed 115200 1. We dump files on the USB flash drive: For SPI Download archive bootstrap.bin sysinit.txt * rootfs start.sh kernel.bin Without SPI Download archive bootstrap_2.bin sysinit2.txt * rootfs start.sh 2. Turn on the console 3. Immediately after the reboot (you can even in advance), we start pressing Ctrl + I until the message appears ****************************************** System initialization forced via Ctrl-I ****************************************** 4. After Ctrl-I, we closely monitor the download log, and as soon as such a menu appears ================================================== 1. Boot from NFS share 2. Boot from FLASH memory 3. Force upgrade with any firmware 4. Erase "env" partition and reboot 0. Stop booting R. Reboot Press [012] to change rootfs source: 5. Quickly click: 0 6. We are waiting for the invitation to login: sml723x-E427XXXXXXXXX login: 7. Enter root login: root 7.1. Check the rootfs section: cat / proc / mtd 7.2. If the section "rootfs" is not, then you need to copy the file on a flash drive with the name "sysinit2.txt" and rename it to "sysinit.txt" and repeat all actions with n 2. In this case, in paragraph 2 of the sysinit.txt file, another one of its own bootstarp2.bin will automatically start 8. Mount the flash drive: mkdir / tmp / sda; mount `ls -t / dev / sd * | tail -n1` / tmp / sda; cd / tmp / sda; ls 9. We are stitching the kernel: dd if = kernel.bin of = / dev / mtdblock8 10. ROOTFS firmware: sh start.sh waiting for the inscriptionSTB UPGRADE DONE! and restart the console 11. reboot: reboot * - ROOTFS is downloaded separately from the boot files. Return instructions on the factory firmware To start, downloadofficial firmwareandfirmware.bin.config , sml723x.bin rename firmware.bin For prefixes of the manufacturer SmartLabs, there is a possibility of initial and forced firmware update via USB Training 1 . prefix from Rostelecom with SmartLabs software. 2 . USB drive no more than 4 GB. 3 . The firmware file for this model console. 4 . Place the file firmware.bin and firmware.bin.config in the drive root. For example, if The drive was connected as a "G:" drive, then the firmware.bin file should be accessible via the path "G: \ firmware.bin". Firmware upgrade 5 . Turn off the console. 6 . Connect the USB-drive with the file firmware.bin in the root. You can connect to any USB-port, if there are several. 7 . Turn on the console. 8 . The prefix will start updating if the new firmware has a version higher than the current one. During the update process, the message is displayed on the screen: "Wait, the firmware is recording." During the upgrade, do not turn off the power or remove the USB drive. 9 . After a successful update, the prefix will reboot and launch the application. 10 . USB drive can be removed from the console. PS: If you have connected a TV from Rostelecom, automatically update the firmware. Playlists Special thanks M3U 2 SMLBOX.TK Bannedmi Initial access to the consoleb_oleg Jumpers that switch memory -s-oleg-a Opened all channels -pavik66 Rocking firmware via UDP within the RT network -pavik66 Server \ portal for playlists -camru Kernel \ bootstrap 3.3 with a blank password -spuln Implementing xupnp service - -spuln Generator playlists for RT -ApocAllIPSyS Adaptation of NV-300 firmware -Jonhmut Unlocked VOD -RickAtreides Implemented verimatrix in MOYO TV firmware -lsd_777 K In order to avoid theft and large charges on TV accounts from RT, ban MAC addresses and other proceedings from RT, in the logs we delete MAC addresses and S / N. For questions about filling caps, please contactBrandfox Post has been editedBrandfox - 30.04.19, 07:54 Reason for editing: Assembly instructions, correction, Video installation instructions SPI, WifiAdapters | ||||||||
Message#2 11.01.14, 14:12 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 07.11.11 Honor 9 Reputation: 7 | I am looking for ANY information about the firmware of this device in order to expand its reduced functionality.  Post has been editedmirotoff - 11.01.14, 14:13 -------------------- Are happythose who like their cares |
Message#3 30.09.14, 20:32 | |
a guest [offline] Group: Users Messages 7 Check in: 07.03.12 Google nexus 4 Reputation: 0 | Good all the time of day. I would like to understand how DLNA works with this device from Rostelecom SLM-482 HD (native firmware). I tried many servers, but the prefix never sees it. Connected via ASUS RT-N10p router. I tried to put ports on IPTV in the settings of the router, theoretically I distributed to the 3-4 port, that is, the prefix and the PC in the same network, but also unsuccessfully. Can anyone come across a solution to this problem? And does it work at all? How can I check? Thanks in advance for the answers! Post has been editedPe @ rl $ - 01.10.14, 00:46 |
Message#4 01.10.14, 00:59 | |
Android be with you [offline] Group: Honorary Gameday Messages 5038 Check in: 19.09.10 Xiaomi Mi Max 3 4/64 Reputation: 897 | |
Message#5 08.11.14, 23:50 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 367 Check in: 12.11.12 Reputation: 20 | mirotoff I am looking for ANY information about the firmware of this device in order to expand its reduced functionality. Without a network, it does not even start! The impression is that there is only a bootloader on it, and it pulls the firmware from the network for the first time and updates on subsequent power-ups. Disassembled - inside there are contacts for connection via I2C and UART, i.e. connect to it if you know the parameters. It is assembled on a Broadcom BCM7230 / 750MHz chip - dual-core with 16 bit DDR3 interface and 100 Mbit network, back in 2012, there were already BCM7231 with 32 bit DDR3 interface, and BCM7356 / 1300 Mhz with Gigabit network and DVB-C / T tuners. Those. You should look for open firmware from devices on the BCM7230 and flash through the COM port. -------------------- Yuzal Amoi N821, Amoi N828. |
Message#6 09.11.14, 00:49 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 367 Check in: 12.11.12 Reputation: 20 | I also found from the technical assignment of the RTK on this STB: Cross-compiler platform - i386 or x86_64, Linux (ex .: Ubuntu) Cross compiler - stbgcc-4.5.3-1.3 Boot Loader - CFE Operating System STB - Linux-2.6, 3.x Linux Kernel - STBstblinux-2.6.37-2.817 Supported file systems are ext2 / ext3, vfat (fat32), jffs2, ntfs, iso9660 (with extensions), UDF, NFS, UBIFS, squashfs A set of UNIX utilities - busybox-1.16.030 Utility for working with IR - lirc-0.9.031 -------------------- Yuzal Amoi N821, Amoi N828. |
Message#7 11.11.14, 17:01 | |
Visitor [offline] Group: Users Messages 10 Check in: 30.07.10 Reputation: 3 | Connected to the UART on the board. Conclusion to the console hitched. if you stop the download, you can log in: login: root pass: len42? enjoy What can you do with it? I did not find the firmware ... Attached files  sml-482_boot.txt(49,02 KB)sml-482_boot_cfe.txt(14.71 KB)sml-482_boot_stop_booting.txt(18.63 KB) |
Message#8 18.11.14, 11:04 | |
Visitor [offline] Group: Users Messages 10 Check in: 30.07.10 Reputation: 3 | [email protected], 15:06  the same as with SML-282 Base, SML-292 Premium, really nothing, since the firmware is written by one company and only for operators. As I understand it, here lies the compiler.http://www.broadcom.com/support/stb/ but you can not collect xbmc for this console? iron is similar to raspberi pi for which there is xbmc Post has been editedb_oleg - 18.11.14, 11:05 |
Message#9 25.12.14, 14:35 | |
a guest [offline] Group: Users Messages 8 Check in: 03.06.11 Reputation: 2 | There is an interest to put a whistle on the Wifi console. If someone gives a firmware / memory dump, I will help with the list of supported whistles. Experience there :) |
Message#10 26.12.14, 23:01 | |
a guest [offline] Group: Users Messages 8 Check in: 03.06.11 Reputation: 2 | Dump is removed, there is a little bit of information. Realtek 8188EUS chip works fine. Specifically tried on TP-LINK TL-WN725N, put in the cap as a working whistle. Chinese garbage from DX.com on 8188LS does not work. WPA2-PSK AES authentication successful on DIR-300NRU B7 1.3. It was necessary to reboot several times, the second time the console remembered the access point and the password to it. TKIP did not try, there is no support in this router. The performance of the DIR-300 B7 leaves much to be desired, the picture on the HD channels is strewing. We will try on the openwrt udpxy bundle, there is a test subject TP-Link 3220. A huge request not to write in a personal with a request how and what to configure. Write to the topic. Post has been editedMcnelly - 26.12.14, 23:05 |
Message#11 14.01.15, 13:22 | |
a guest [offline] Group: Users Messages 6 Check in: 26.01.09 Reputation: 3 | Hello! There is a firmware from this prefix Rostelecom, who can come in handy. It is poured simply, dumped into the root of the flash drive, inserted and included, the file name should be firmware.bin Attached files  SLM-482HD.rar(58.19 MB) |
Message#12 14.01.15, 23:10 | |
a guest [offline] Group: Users Messages 1 Check in: 14.01.15 Reputation: 0 | S-oleg-a @ 01/14/2015, 15:22 Hello! There is a firmware from this prefix Rostelecom, who can come in handy. It is poured simply, dumped into the root of the flash drive, inserted and included, the file name should be firmware.bin Thanks, but how to connect to the console? Directly connect to the computer cable? If so, how? Post has been editedthreethreefour - 14.01.15, 23:11 |
Message#13 15.01.15, 04:58 | |
a guest [offline] Group: Users Messages 6 Check in: 26.01.09 Reputation: 3 | [email protected], 00:10 Thanks, but how to connect to the console? Directly connect to the computer cable? If so, how? Poured from a flash drive. It will not give anything to the simple user, because This is a Rostelecom firmware. |
Message#14 19.01.15, 12:14 | |
Novice [offline] Group: Active users Messages 33 Check in: 30.08.14 Reputation: 0 | Mcnelly @ 12.26.2014, 11:01 Dump is removed, there is a little bit of information. Realtek 8188EUS chip works fine. Specifically tried on TP-LINK TL-WN725N, put in the cap as a working whistle. Chinese garbage from DX.com on 8188LS does not work. could you figure out what other wifi modules are suitable? Post has been editedx98tmb - 19.01.15, 12:16 |
Message#15 02.03.15, 00:46 | |
a guest [offline] Group: Users Messages 1 Check in: 14.12.12 Samsung Galaxy S5 SM-G900F Reputation: 0 | Hello. Help people Good Pts need MTC firmware for this console. |
Message#16 06.03.15, 14:45 | |
Visitor [offline] Group: Users Messages 11 Check in: 03.08.14 Reputation: 1 | SergeyKhokh, SergeyKhokh @ 01/04/2015, 07:13 I myself really want to combine IPTV traffic with Internet traffic, in my local computer, so that I could watch IPTV according to playlists on media players and computers, but have not yet found whether this is possible - it is done in a different way. Before you put the switch router-switch. In his cable from the provider. Next to this the switch-switch two cables are inserted into the router one on the WAN port, LAN port to another. MAK the router addresses foreign and domestic different, so this scheme will work. Further all the standard way to allocate is not necessary for the console port. The remaining ports are switched and computer consoles. You can use the internet and watch IPTV. Ability to change the router to resolve the issue. Post has been edited7110 - 06.03.15, 14:47 -------------------- RSFSR is not Russia !!! |
Message#17 07.03.15, 14:55 | |
Veteran [offline] Group: Banned Messages 1635 Check in: 07.05.10 Reputation: 73 | SML-482 TV Decoder instructionsMts http://static.mts.ru/u...Instruction_SML482.pdf specifications HD decoder (SML-482 HD Base) http://www.mts.ru/dom/equipment/tv_decoders_mts/ Home TV in high definition The new HD decoder is the latest generation device designed for watching home digital television (Internet Protocol Television, IPTV). The HD decoder is compatible with modern televisions and projectors that support high definition television (High Definition Television, HDTV). At the same time 1080p video mode will provide you with the best image quality. Connection interface HD decoder has a wide range of ports and outputs - USB, optical SPDIF, HDMI with HDCP, etc. Design HD decoder is made in the form of a laconic "cube" of high-quality translucent plastic. Tv menu interface The HD decoder is distinguished by a fast and intuitive three-dimensional graphic interface: the delay in moving through sections of the animated TV menu is minimal, and the transition logic is extremely simple. ChipsetBCM7230750MHzdual-core (2000DMIPS) RAM DDR3 512 MB Flash NAND 256 MB IrDA receiver + Dimensions (W * D * H), mm 100 * 100 * 32 The weight of the main device, 140 Inputs and Outputs: USB 2.0 Host Rear + USB 2.0 Host side optional Ethernet 10 / 100Mbit Base T + CVBS (mini-jack) + HDMI 1.4a with HDCP + Analog stereo audio output (mini-jack) + Optical S / PDIF optional Content Protection: Securemedia + Verimatrix + Encoding formats: Supported Encoding Formats The following codecs are supported at the hardware (technical) level: audio codecs — MPEG1 / 2, MP3, AAC, AC3, WMA, video codecs — MPEG-2, MPEG-4 Part 2, H.263, H.264 / MPEG-4 AVC, VC-1. The specific set of supported codecs for a specific set-top box is agreed with the operator when ordering equipment. Errors when using consoles for viewingDigital televisionMts Error code E06-4: Possible reasons: The smart card is inserted upside down. Smart card not fully inserted A third-party smart card is used (not for MTS Digital Television) The smart card has dirty contacts Smart card defective Solutions: Check the correctness of the installation of a smart card for MTS Digital Television Gently clean the smart card contact pad without using detergents and metal tools / objects If these actions did not lead to the elimination of the error, you must contact the contact center for support by calling: 8 800 250 08 90 Error code E16-4: Possible reasons: Out of cash on the personal account Unsubscribed channel selected Solutions: Top up the personal account for the required amount Switch to the channel that is included in the purchased package If these actions did not lead to the elimination of the error, you must contact the contact center for support by calling: 8 800 250 08 90 Error code E33-4: Possible reasons: Outdated software version on the console Solutions: Update the software version on the console by selecting the appropriate item in the menu: for Coship N5266C: Main menu (“MENU” button on the remote control) ->System Setup ->Update software; for EKT DCD3011: Main menu (“MENU” button on the remote control) ->System Setup ->Software Update. If the error after updating the software is not fixed, you must contact the contact center for support by calling: 8 800 250 08 90 Error code E120-4, E30-4: Possible reasons: The prefix has been reset and has not yet had time to get service information to decrypt channels. Solutions: Leave the console on for 30 minutes * If after a long time (more than 30 minutes) the error remains relevant, you should contact the contact center for support by calling: 8 800 250 08 90 * The set-top box for watching Digital Television MTS must be connected to a signal source (antenna cable). Error code E19-4: Possible reasons: The prefix was turned off for a long time (they were not used to watch MTS Digital Television) Solutions: Leave the prefix with the smart card on for 30 minutes * If after a long time (more than 30 minutes) the error remains relevant, you should contact the contact center for support by calling: 8 800 250 08 90 * The set-top box for watching Digital Television MTS must be connected to a signal source (antenna cable). Errors when using the TV module (CAM) Error code E06-4: Possible reasons: The smart card is inserted upside down. Smart card not fully inserted A third-party smart card is used (not for MTS Digital Television) The smart card has dirty contacts Smart card defective Solutions: Check the correctness of the installation of a smart card for MTS Digital Television Gently clean the smart card contact pad without using detergents and metal tools / objects If these actions did not lead to the elimination of the error, you must contact the contact center for support by calling: 8 800 250 08 90 Error code E16-4: Possible reasons: Out of cash on the personal account Unsubscribed channel selected Solutions: Top up the personal account for the required amount Switch to the channel that is included in the purchased package If these actions did not lead to the elimination of the error, you must contact the contact center for support by calling: 8 800 250 08 90 Error code E120-4, E30-4: Possible reasons: Date and time are incorrectly set on the TV with the TV module Solutions: Check the date / time set on the TV, and if necessary, set the current date / time, following the instructions for your TV If changing the date and time did not lead to results, then perform the following sequence of actions: switch the TV to the 16th channel; remove the TV module from the TV; Install the TV module back into the TV. If these actions did not lead to the elimination of the error, you must contact the contact center for support by calling: 8 800 250 08 90 Error code E19-4: Possible reasons: The TV with the installed TV module was disconnected for a long time (it was not used for watching MTS Digital Television) Solutions: Leave the TV with the TV module and smart card on for 30 minutes * If after a long time (more than 30 minutes) the error remains relevant, you should contact the contact center for support by calling: 8 800 250 08 90 * A TV with a TV module must always be connected to a signal source (antenna cable). Error code is missing: The inscription on the TV screen: CI + ERROR: Host Certificate Invalid-Expiried, Please Tune to DTV service - 16 Possible reasons: Date and time are incorrectly set on the TV with the TV module Solutions: Check the date / time set on the TV, and if necessary, set the current date / time, following the instructions for your TV. If changing the date and time did not lead to results, perform the following sequence of actions: switch the TV to the 16th channel; remove the TV module from the TV; Install the TV module back into the TV. If the indicated actions did not lead to the elimination of the error, it is necessary to contact the contact center for support by calling 8 800 250 08 90. Unreadable characters when receiving a message: Possible reasons: The TV menu is set to any language other than Russian. Solutions: Set the Russian language in the menu of your TV (to install the Russian language, you must use the instruction manual of your TV) SmartTUBE UI (User Interface) http: //www.smartlabs.t...cts/smarttube/client/ Client applications for interactive television in modern set-top boxes (STB), media centers, PCs and so on. Characteristics of a single platform for various client applications (CAF): Development and modification of applications for set-top boxes occurs in the modeWYSIWYGon the PC screen; The developer “sees” the application exactly as it will appear on the TV screen; The service operator has access to the application development environment; The operator has the opportunity to develop applications on their own or involve third-party organizations; Suppliers of additional services for the operator is also available application development environment. They can independently develop additional applications for the operator (for example, photo services, information services (weather, courses, etc.), communication services), which the operator can then make available to its subscribers. Key features of SmartTUBE UI client applications Standard user interfaces developed by well-known design agencies; High speed of development and implementation of services and applications; Independence from suppliers of subscriber devices; Fully identical user interface for all types of subscriber devices; Quick launch of new services to the market; Availability of tools for application development by independent suppliers with their subsequent integration into the existing interface; The possibility of "immediate" mass replacement of the entire application in the set-top box. Support for a wide range of set-top boxes, as well as a streamlined process of integration with new set-top boxes. MAG 200, MAG 250, Yuxing yx-6919a, STB from Motorola, SML-282 Base and SML-292 Base from SmartLabs. http://rostelekom.net/…e-ui-zhdat-li-peremen/ Post has been editedNikolka00 - 07.03.15, 17:45 -------------------- #WinterAlsoClose |
Message#18 07.03.15, 16:10 | |
Veteran [offline] Group: Banned Messages 1635 Check in: 07.05.10 Reputation: 73 | unpacked Smartlabs SML-482 HD Base (Rostelecom) (Post s-oleg-a # 37236893) SLM-482HD in the attachment Start. loadervmlinux and ending, signature \ certificate and .. \\ squash.CramFS - opens at 7zip \\ squashfs.zip(3.8 MB)I did not flood the firmware itself; we shred firmware.bin according to this principle dd if = firmware.bin of = squash.bin bs =3965272 skip = 1 16960x6A0 gzip compressed data, was "vmlinux", from Unix, last modified: Fri Jun 27 08:25:49 2014, max compression 39652720x3C8158 Squashfs filesystem, little endian, version 4.0, compression: gzip, size: 57376118 bytes, 846 inodes, blocksize: 131072 bytes, created: Fri Jun 27 18:02:02 2014 613428480x3A80480 CramFS filesystem, little endian size 40960 version # 2 sorted_dirs CRC 0x75e464bd, edition 0, 15 blocks, 10 files -------------------- #WinterAlsoClose |
Message#19 07.03.15, 16:36 | |
Veteran [offline] Group: Banned Messages 1635 Check in: 07.05.10 Reputation: 73 | Mcnelly @ 12.26.2014, 21:01 Realtek 8188EUS chip works fine. I will add that from Ralink rt2870 (USB) it should also work, since everything is in the firmware for this etc \ Wireless \ RT2870STA \ RT2870STA.dat -------------------- #WinterAlsoClose |
Message#20 10.03.15, 12:55 | |
Old resident [offline] Group: Curators Messages 1201 Check in: 21.01.11 Samsung Galaxy S8 Exynos Reputation: 115 | Found the procurement documentation for this console, maybe this information will somehow help to melt its iron heart? I'm in this, alas, quite noob (( Attached files  Purchase_Documentation.doc(152.5 KB)-------------------- |
Message#21 13.03.15, 19:59 | |
Veteran [offline] Group: Banned Messages 1635 Check in: 07.05.10 Reputation: 73 | Watch channels on your computer and STB at the same time and at the same time different. http://www.2dsl.ru/set...pyuter-rostelekom.html -------------------- #WinterAlsoClose |
| mobile version | Time is now: 13/05/19, 10:43 |
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement