Beelink R89 / Tronsmart Orion R28 [Android] | [TV Box] [Rockchip RK3288]
TV Box RK3288 Cortex-A17 Quad Core
I realized that this firmware works best on Tons Marts, I always change the wallpaper. programs for this
West7777777 @ 09.09.2015, 16:50
Wallpaper I always change specials. programs for this
And I, too. , Factory's factories '' Like, I use it.
Post has been editedJohnson 72. - 09.09.15, 18:30
West7777777 @ 09.09.2015, 17:23
Well, put yourself, for example, image to wallpaper and you will be happy ...
 |
If you pay attention, then the person who has given information on R28Patch wrote the Divine in quotes)))
I have everything on Tonmmart perfectly put before it and Stage 2 and only now everyone is satisfied, until the best found ...
If someone suddenly needs to unpack images , and specifically System.img - then by passing from 10 ways,
1) forStage_2.
RKwinTools_V1.3
It is necessary to create folders inside the folder folder:Rkwintools \ Unpack \ Firmware \ imageto fill the system.img, run RunMe.Bat to press 5, and the unpacking will appear in the folder -Rkwintools \ Unpack \ System
2) for the other System.img works -Linux-Reader.
Image-UT3_220 r28patch
Wasser 3.0.0 RC1 (sobering the firmware itself for images before)
p.s.
Judging by everything because of this, only Stage_2 does not back the System section in TWRP, is collected by something very old, and these old (rkwintools) current and unpackled
Post has been editedErnestoGuevara7 - 19.07.16, 02:02
1) forStage_2.
RKwinTools_V1.3
It is necessary to create folders inside the folder folder:Rkwintools \ Unpack \ Firmware \ imageto fill the system.img, run RunMe.Bat to press 5, and the unpacking will appear in the folder -Rkwintools \ Unpack \ System
2) for the other System.img works -Linux-Reader.
Image-UT3_220 r28patch
Wasser 3.0.0 RC1 (sobering the firmware itself for images before)
p.s.
Judging by everything because of this, only Stage_2 does not back the System section in TWRP, is collected by something very old, and these old (rkwintools) current and unpackled
Post has been editedErnestoGuevara7 - 19.07.16, 02:02
Reason for editing: cap + logo
rusk.gm @ 09.09.2015, 15:50
Judging by this post, not everything is so simple!
Well, on Wasser RC1, too, 1080p in the least.
Learn how to disappear YouTube up to 1080p on UT3_220 PATCHR28
Although in principle a full copy of the original YouTube only from 1080p -Og youtube
Post has been editedINFLICTED - 09.09.15, 21:51
Inflicted @ 09.09.2015, 20:49
Judging by everything because of this, only Stage_2 does not back the System section in TWRP, is collected by something very old, and these old (rkwintools) current and unpackled
In fact, I once also installed various experiments with the SYSTEM assembly, so I came across the fact that the System did not back up in the TWRP either in CWM. There is some kind of progress in creating ext4. It seems to be created, it works, but correctly in the recovery does not make it, and even even makes it, then the backup creates an equal zero.
Post has been editedmaximry - 09.09.15, 23:17
MAXIMRY @ 09.09.2015, 23:16
In fact, I once also installed various experiments with the SYSTEM assembly, so I came across the fact that the System did not back up in the TWRP either in CWM. There is some kind of progress in creating ext4. It seems to be created, it works, but correctly in the recovery does not make it, and even even makes it, then the backup creates an equal zero.
Well, I still managed to reveal a minus when the firmware sew not with standard 2G, and for example, with 8G for backup TWRP
You can add to the header
It turns out that Buckpack Internal SD makes normally in both cases.
In both cases, when recovery, it gives Falied, current with a native 2G anyway, all the data judging throughout everything applies, nothing restores anything from 8G.
But the output is simple :
Unpack from backup by archiver Internal SD data, connect the console to the computer and connect the Internal SD consoles in the flash drive mode (turn off the USB debug) and stupidly copy the archive content on the USB flash drive.
A little longer, but full backup))
Well, or you can immediately make backup Internal SD yourself, simply by copying all the data from there somewhere, and then return them if necessary.
Post has been editedErnestoGuevara7 - 19.07.16, 02:02
Sergey_d @ 09.09.2015, 11:49
It seems that the fragments are not prescribed or incorrectly prescribed service data. Try glue in another program. For example, MKVTOOLNIX.
You can try it, but the problem is that there are already many films that are mounted in Panasonic HD Writer.
That and besides, I got used to this program for home installation video, she completely suits me, besides, it has an indisputable plus when with the output of ready-made projects it does not recharge the bulk part of the video, and it disds only where the titers or special effects are inserted.
And another plus for me is that when connecting the camera to the computer, then the camera processor is used when displaying the movie to speed up the render, it actually speeds up the process on my computer.
When the camera just bought a smaller media players, and at that time people on the forums wrote that on WD TV Live video after installation in Panasonic HD Writer goes without problems.
And then it turns out that the prefix is ​​powerful, and the video does not pull.
Guys there was still a problem. I put the firmware Wasser Version 3.0.0 RC1, set using Androidtool v2.3 and now I can not put Recovery TWRP or change the firmware.
When you connect the console to the computer, it sees it when you open the Androidtool V2.3 program, it is displayed in the Status of the Found One AdB Device bar when you press SWITC, nothing changes in the Status Bar also glows "Found One AdB Device", and on the right in the window The programs appear two SWITCH RockUSB Start and Switch Rockusb Success.
How to start the Found One Loader Device mode?
What is the problem when I stitched the first time with my native firmware, the first time was successful.
WESTENT @ 09.09.2015, 23:44
How to start the Found One Loader Device mode?
What is the problem when I stitched the first time with my native firmware, the first time was successful.
What is the problem when I stitched the first time with my native firmware, the first time was successful.
Connect the console to the computer, pull the power wire from the console, head the button in the AV connector, plug the power wire, press the button in the AV connector.
Prefix will boot Found One Loader Device
Post has been editedINFLICTED - 10.09.15, 00:02
WESTENT @ 09.09.2015, 22:44
I can not put Recovery TWRP
For different firmware, you need different TWRP. For RC1 - herethis
And what, didn't you send your videos in RC1? Can you lay out sample? Usually any video is played on the box, if not one player, then how to the other
Post has been editedErnestoGuevara7 - 19.07.16, 02:10
Reason for editing: In the header
WESTENT @ 09.09.2015, 22:44
How to start the Found One Loader Device mode?
Prefix Turn off. Lododioda does not burn. Without a button in the AV connector, press the toothpick button and hold. Lands are already inserted into OTG, Android Tools is running. We will fit into the USB computer, the LED lights up blue (if you do not, press the power button) waiting for a few seconds until Found appears .... Loader ..., let go toothpick. You know how.
Johnson72 @ 09/10/2015, 00:16
Prefix Turn off. Lododioda does not burn. Without a button in the AV connector, press the toothpick button and hold. Lands are already inserted into OTG, Android Tools is running. We will fit into the USB computer, the LED lights up blue (if you do not, press the power button) waiting for a few seconds until Found appears .... Loader ..., let go toothpick. You know how.
Thanks, I will try in the evening.
Digitalriver @ 09/10/2015, 00:05
For different firmware, you need different TWRP. For RC1 - this
And what, didn't you send your videos in RC1? Can you lay out sample? Usually any video is played on the box, if not one player, then how to the other
And what, didn't you send your videos in RC1? Can you lay out sample? Usually any video is played on the box, if not one player, then how to the other
Thank you, yes the video did not go.
As for the sample, I will try to find a small video in the evening and lay out on Yandex drive.
On Wasser Version 3.0.0 RC1, I have a slightly searched on the screen, I did not find where to fix it.
On the drain there somehow everything was fine, tell me how to fix?
Post has been editedwestent - 10.09.15, 08:23
Inflicted @ 09.09.2015, 23:38
A little longer, but full backup))
Isn't it easier to immediately make a backup on an external card or flash drive?
MAXIMRY @ 09/10/2015, 08:53
Isn't it easier to immediately make a backup on an external card or flash drive?
Yes, you can immediately stupidly copy data from Internal SD anywhere or later
WESTENT @ 09/10/2015, 07:21
On Wasser Version 3.0.0 RC1 I have a little image of the screen, I did not find where to fix it
Settings - Screen - Screen Scale.
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement