apn 616-0580

apn 616-0582 - the battery was dead, bit off the contacts going to the battery from the charge controller, and hooked the charge controller to the phone, and the battery picked up the battery contacts on the contacts and everything was done, the phone apparently needs the correct battery controller.

Post has been editediTEHb - 16.08.17, 21:39

The 616-0580 battery helped and the port was changed, it was 616-0579

So, too, error 29 iphone 4s 8 gb. It appeared after there was an attempt to reflash before it worked stably. Battery 616-0580. Another tried it did not help either. The loop changed. cables changed the computer changed.
last log message
[12: 57: 26.0263] SYSLOG: Jan 22 01:42:57 localhost kernel [0]<Notice>: [nand_part_core: INF @ 2297] first 2 pages of boot blocks
[12: 57: 26.0263] SYSLOG: Jan 22 01:42:59 localhost kernel [0]<Notice>: [nand_part_core: INF @ 3177] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[12: 57: 26.0263] SYSLOG: Jan 22 01:42:59 localhost kernel [0]<Notice>: [nand_part_core: INF @ 3180] final 156 pages of boot blocks written
[12: 57: 26.0263] entering update_gas_gauge
[12: 57: 26.0263] Update [Gas Gauge] error - The operation couldn’t be completed. (RamrodErrorDomain error 1002 - update_gas_gauge: gasgauge_swupdate returned -6)
[12: 57: 26.0263] Update [Gas Gauge] failed - 2 retries remaining ...
[12: 57: 26.0263] entering update_gas_gauge
[12: 57: 26.0263] Update [Gas Gauge] error - The operation couldn’t be completed. (RamrodErrorDomain error 1002 - update_gas_gauge: gasgauge_swupdate returned -6)
[12: 57: 26.0263] Update [Gas Gauge] failed - 1 retries remaining ...
[12: 57: 26.0263] entering update_gas_gauge
[12: 57: 26.0263] Update [Gas Gauge] error - The operation couldn’t be completed. (RamrodErrorDomain error 1002 - update_gas_gauge: gasgauge_swupdate returned -6)
[12: 57: 26.0263] Update [Gas Gauge] failed - 0 retries remaining ...
[12: 57: 26.0263] 0: RamrodErrorDomain / 3ea: update_gas_gauge: gasgauge_swupdate returned -6
[12:57:26.0263]
[12: 57: 26.0263] ==== end of device restore output ====
[12: 57: 26.0290] AMRAuthInstallDeletePersonalizedBundle
[12:57:26.0890] <Restore Device 00000295DC7632F0>: Restore failed (result = 29)
[12: 57: 26.0890] Checkpoint data after a restore is NULL.
[12: 57: 26.0890] Finished Restore Restore Phase: Failed
[12: 57: 26.0890] Restore completed, status: 29
[12: 57: 26.0890] Failure Description:
[12: 57: 26.0890] Depth: 0 Code: -1 Error: AMRestorePerformRestoreModeRestoreWithError failed with error: 29
[12: 57: 26.0890] Depth: 1 Code: 29 Error: Error: Failed to handle message type StatusMsg
[12: 57: 26.0890] Depth: 2 Code: 29 Error: failed to update device firmware
[12: 57: 26.0890] Depth: 3 Code: 29 Error: ramrod firmware update failed
[12: 57: 26.0890] Depth: 4 Code: 1002 Error: update_gas_gauge: gasgauge_swupdate returned -6
[12: 57: 26.0890] State Machine Dump, status: ERROR - [state: Recovery remaining-cycles: 0] ->[state: RestoreOS remaining-cycles: 0 (current state)]
[12: 57: 26.0890] Changing state from 'Restoring' to 'Error'
[12: 57: 26.0890] State is now set to error

in DFU mode gives an error
[12: 57: 26.0263] SYSLOG: Jan 22 01:42:57 localhost kernel [0]<Notice>: [nand_part_core: INF @ 2297] first 2 pages of boot blocks
[12: 57: 26.0263] SYSLOG: Jan 22 01:42:59 localhost kernel [0]<Notice>: [nand_part_core: INF @ 3177] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[12: 57: 26.0263] SYSLOG: Jan 22 01:42:59 localhost kernel [0]<Notice>: [nand_part_core: INF @ 3180] final 156 pages of boot blocks written
[12: 57: 26.0263] entering update_gas_gauge
[12: 57: 26.0263] Update [Gas Gauge] error - The operation couldn’t be completed. (RamrodErrorDomain error 1002 - update_gas_gauge: gasgauge_swupdate returned -6)
[12: 57: 26.0263] Update [Gas Gauge] failed - 2 retries remaining ...
[12: 57: 26.0263] entering update_gas_gauge
[12: 57: 26.0263] Update [Gas Gauge] error - The operation couldn’t be completed. (RamrodErrorDomain error 1002 - update_gas_gauge: gasgauge_swupdate returned -6)
[12: 57: 26.0263] Update [Gas Gauge] failed - 1 retries remaining ...
[12: 57: 26.0263] entering update_gas_gauge
[12: 57: 26.0263] Update [Gas Gauge] error - The operation couldn’t be completed. (RamrodErrorDomain error 1002 - update_gas_gauge: gasgauge_swupdate returned -6)
[12: 57: 26.0263] Update [Gas Gauge] failed - 0 retries remaining ...
[12: 57: 26.0263] 0: RamrodErrorDomain / 3ea: update_gas_gauge: gasgauge_swupdate returned -6
[12:57:26.0263]
[12: 57: 26.0263] ==== end of device restore output ====
[12: 57: 26.0290] AMRAuthInstallDeletePersonalizedBundle
[12:57:26.0890] <Restore Device 00000295DC7632F0>: Restore failed (result = 29)
[12: 57: 26.0890] Checkpoint data after a restore is NULL.
[12: 57: 26.0890] Finished Restore Restore Phase: Failed
[12: 57: 26.0890] Restore completed, status: 29
[12: 57: 26.0890] Failure Description:
[12: 57: 26.0890] Depth: 0 Code: -1 Error: AMRestorePerformRestoreModeRestoreWithError failed with error: 29
[12: 57: 26.0890] Depth: 1 Code: 29 Error: Error: Failed to handle message type StatusMsg
[12: 57: 26.0890] Depth: 2 Code: 29 Error: failed to update device firmware
[12: 57: 26.0890] Depth: 3 Code: 29 Error: ramrod firmware update failed
[12: 57: 26.0890] Depth: 4 Code: 1002 Error: update_gas_gauge: gasgauge_swupdate returned -6
[12: 57: 26.0890] State Machine Dump, status: ERROR - [state: Recovery remaining-cycles: 0] ->[state: RestoreOS remaining-cycles: 0 (current state)]
[12: 57: 26.0890] Changing state from 'Restoring' to 'Error'
[12: 57: 26.0890] State is now set to error

all the same.


iPhoneUpdater 5.log(133.3 KB)
iPhoneUpdater 6.log(149.05 KB)

serg_abakan
If you translate gas_gauge - then this is a gas sensor :)
if without gas, then you swear at some kind of sensor.
Try to disconnect the screen and the sensor and reflash.

This is the so-called% battery charge sensor in the battery. There is no correct information from the DATA-contacts of the battery.

Only the replacement of the battery with the original one helped. With a non-original battery when trying to flash the latest version there was an error 29, when trying to flash versions earlier there was an error 3194.

Faced with this problem. Tell me how to distinguish the original and non-original. And where in Muscovy you can buy the original 100%. That offers a lot. But there are suspicions that this is a leftist

I will join, the problem is aggravated by the fact that in any repair they promise to fix it, but to no purpose!

iphone270181, You can take a good copy, but it will not be original, maybe it will ...
valeriii Try to throw the acb from a working phone and which is normally sewn

Brothers give poyuzat old original battery, I promise to pass on to the needy ... Or give back.

error 29
short-term battery shutdown helped (seconds 20)
and everything was immediately done,
battery original, wear large

Battery apn 616-0580 new 16th year of production. Not the original visible.
It does not allow to flash, contacts are pressed.

By chance, a friend found himself on a shelf 4s with a broken screen, an apn 616-0580 battery, but an original one. I asked it the first time.

Post has been editedmishanya84 - 26.01.18, 15:26

mishanya84 tochnyak. : D
This morning I found an iPhone: P: D: rolleyes: I turned on for the whole day, no one had called. Well, then I don’t need it)))
The screen is blocked. I think let me go. The lace was so in stock))) Well, and the error is a mistake.
It is necessary in kind to let Akum hands, many people to help.
Battery happiness: D so to speak)))

Error 29 has just flashed two iPhone 4 through the original battery, verified

Yeah ! Akb 616-0581 616-0581 did not help ((it’s straight to find that I need a battery to look for. Does this figure mean something ??

Post has been editedPEMAPK - 05.03.18, 20:27

and the tuna's serial number disappears after being retrieved by

Chinese, I also had the original number, the Chinese don't give a shit what to write. But on the original battery was a sticker hologram.

Post has been editedmishanya84 - 05.03.18, 23:01