Xiaomi Redmi Note - MIUI firmware
When connecting the body to BB and copy files, 20 MB is heavier to the phone - it is impossible to copy. Conductors freeze until you pull the cable from the body. When copying, I choose "Mount USB drive" or "files" - the result is the same. Small files<20 MB copied to the body quickly and quickly. Micro SD 32 Giga checked for errors ... purely. Alternatively, I use Airdroid, but long in comparison with direct connection. Where is the dog buried?
Grand_22 @ 05.10.2014, 15:06
When connecting the body to BB and copy files, 20 MB is heavier to the phone - it is impossible to copy. Conductors freeze until you pull the cable from the body. When copying, I choose "Mount USB drive" or "files" - the result is the same. Small files<20 MB copied to the body quickly and quickly. Micro SD 32 Giga checked for errors ... purely. Alternatively, I use Airdroid, but long in comparison with direct connection. Where is the dog buried?
The cable may still have a problem. Try the cable from Nokia.
REVENGERU @ 05.10.2014, 13:01
That's just I'm in search and found. There is a slightly different problem, does not react the widget, I have it, it is pressed, Google Nauch opens and everything flies with the error google search. Also, when trying to use voice in voice.
That app you have shown already installed. I disconnected it, cleaned the cache, turned on, leafing the welcoming pages of Google Science and the application again flew out.
That patch put, without any changes.
That app you have shown already installed. I disconnected it, cleaned the cache, turned on, leafing the welcoming pages of Google Science and the application again flew out.
That patch put, without any changes.
I have a similar problem, one in one. Firmware 30 from MUVI4. If you clean the cache, it comes to the question to include Li Google Nau and after the choice even yes, even though there is no, flies with an error. When you restart immediately an error.
And in the settings of the video application, the first item is not translated.
 |
JAHRASTA @ 05.10.2014, 07:19
...
I have a similar problem, one in one. Firmware 30 from MUVI4. If you clean the cache, it comes to the question to include Li Google Nau and after the choice even yes, even though there is no, flies with an error. When you restart immediately an error.
I have a similar problem, one in one. Firmware 30 from MUVI4. If you clean the cache, it comes to the question to include Li Google Nau and after the choice even yes, even though there is no, flies with an error. When you restart immediately an error.
The problem is solved simply, delete Google from applications and installs from the market as not systemic. The application can be deleted by any allowing this program as a Clean Master option and it seems to be in the header if not add.
Post has been editedCruelmsu. - 05.10.14, 18:14
Reason for editing: overclocking
zlodei285,
LeXXer16,
JahRasta,
Cruelmsu,
LeXXer16,
JahRasta,
Cruelmsu,
M
Check outForum Rules!
4.19. Forbidden abuse of quoting (overquoting, overquoting). It is not necessary to quote fully opponent posts - just select the main points and press the button
4.19. Forbidden abuse of quoting (overquoting, overquoting). It is not necessary to quote fully opponent posts - just select the main points and press the button
Lexxer16 @ 05.10.2014, 17:12
...
The cable may still have a problem. Try the cable from Nokia.
The cable may still have a problem. Try the cable from Nokia.
I use the native cable.
I tried to remove the xiaomi account, slows down something :) back returned. What do you think he eats a lot of battery?
Xiaomi Redmi Note WCDMA firmware are installed usingSP Flash Tool.
Designed to go from 97 or any other version of the firmware
Firmware based on37Firmware OTdrugoisport_RAUL
30and36Versions of firmware OT.muvi4
Installing the firmware is similar to instructions in picturesRepairing the phone from the "brick"which I highly recommend first to view or read.
What is Tsymus?
Download links:
Xiaomi Redmi Note WCDMA V.37.0
Xiaomi Redmi Note WCDMA V.36.0
Xiaomi Redmi Note WCDMA V.30.0
Post has been editedStarPer007 - 09.10.14, 22:30
Designed to go from 97 or any other version of the firmware
Firmware based on37Firmware OTdrugoisport_RAUL
30and36Versions of firmware OT.muvi4
Installing the firmware is similar to instructions in picturesRepairing the phone from the "brick"which I highly recommend first to view or read.
Quick Installation Guide
- On the Windows 7 system installdrivers
- Download the archive with the firmware37 | 36 | 30and unpack.
- We get the folder with the firmware, go to it, we find and run the fileflash_tool.exe
- In the window with the program, on the right side, click the buttonScatter-Loading .
- In the drop-down list of files to chooseMT6592_Android_scatter.txt It is in the folder with the firmware.
- To takeGood high quality cableAnd stick it to the laptop. If there is no laptop, then the USB connector onback wallThe system unit connected to the uninterruptible power supply. If there is no laptop or UPS, then pray that the voltage in the network in the firmware process is not disconnected. : D.
- Press the button with the buttonDownload .
- Phoneturn off And connect to the cable.
- The firmware must begin, the firmware process is visible at the bottom of the program window, if the firmware has not begun, distort the battery (get and pasted into place). If you flew around the window with an error, then read inpostspoilerInformation on SP Flash Tool errors and solutions found
- At the end of the firmware, a green circle appears with a check mark. Pull the cable and turn on the phone.
Be careful when firmware, you should not press the destination buttons that you do not understand.
With the Flash Tool, it is very easy to kill all software in the phone including EMEI, having received a dead piece of iron at the exit, which will not bring joy to you. Before the firmware, make sure that the sewer matches the phone, if there is doubt or not sure, it is better not to flash anything. Phones with someone else's firmware usually do not work. Remember with Flash Tool You can flash anything, any files including the firmware that is not compatible with its life.
What is Tsymus?
- You immediately get the latest russed version of the firmware frommuvi4.
- Recovery changes to a modified 2.7.0.0.
- Personal data and installed programs are not erased.
- For convenience, the folder with firmware is packs in self-disstaining archives.
Download links:
Xiaomi Redmi Note WCDMA V.37.0
Xiaomi Redmi Note WCDMA V.36.0
Xiaomi Redmi Note WCDMA V.30.0
Post has been editedStarPer007 - 09.10.14, 22:30
People tell me. 97 firmware. In Micloud, it is synchronized with everything other than call records and voice recorders. How to synchronize them in the cloud?
Maybe someone came across on the last firmware 36 from the uv. Maslakov, turn off the reset of battery statistics after rebooting?
None of the methods of recovery IMEI, that in the header did not help. MtkdroidTools does not see the device, according to the MassLakoff method, it is also impossible. What else can you try?
Andrik06 @ 10/06/2014, 11:20
None of the methods of recovery IMEI, that in the header did not help. MtkdroidTools does not see the device, according to the MassLakoff method, it is also impossible. What else can you try?
When restoring the MassLakoff method, it is necessary to stand the modem from 23 firmware, or the entire firmware.
Post has been editedmclaude74 - 06.10.14, 12:10
McLaude74 @ 10/06/2014, 13:08
When restoring the MassLakoff method, it is necessary to stand the modem from 23 firmware, or the entire firmware.
I downloaded 23 firmware, it does not work.
Installed MI PC Suite- After replacing the ENGLISH PATCH files, the program on starts.
andrik06, Do not change files just installing it, it is necessary for drivers, without it, it is not possible to connect to Droid TulsTomhenson @ 10/06/2014, 13:33
Without it, it is not possible to connect to Droid Tuls
That is, reinstall the program, remove all the firewood, run the program and it will install your firewood. Then go to Droid Tuls ??
andrik06, Yes, just Zainstal Prog and all then connect the phone in all modes, TiSt MTP drive and so on. By the way, here is my post to restore having on THL W100 should helpTHL W100 - Firmware (post # 28490461)
Firmware 36 from Maslakov, disappeared the possibility of switching between programs in the settings. How to return ??
The notification of the presence of a 36th stable version lifted. I click "update later", anyway, after a while, this notification comes. No need to be updated. How to remove this notice?
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement