I'll try charging a little again.
When you turn on the microUSB (and to charge and to the computer), the red diode flashes once a second.
When you press in this state, the power button lights up constantly.
Whether the charge is coming is not clear, especially with a magnetic cable.
When you try to turn on the phone, it does not vibrate.

Now the phone has become defined in the computer as "your input device"
When connected with the sound button "-" pressed, the device manager on the computer constantly restarts and the sound is made.
The red diode on the body flashes.
When you try to press the power button of the phone with this connection to the computer, it emits 3 vibrations.
Flashlight does not see the body ...
Maybe for specialists this information means something and they will tell you what to do next?

So vskidku not remember, but the most proven way to put the body in the 0 - to throw it in the freezer. 100% guarantee that the body will sit down to 0 in the next six days. Ideally, we should throw the battery cable and look at the result. And what kind of backup poured? If the body at some time interval appears in the manager, you can try to click download in flashtool, and any attempt to the body still sew. Also, if memory serves, it is possible to clamp down not only the volume, but also upwards. What is responsible for what, the life of me I do not remember ... It has long been sold Z3C, tire out for its repair.

Post has been editedTransistor - 08.03.17, 20:06

Well, I'll try your freeze method.
And then you can not defuse the phone.

Nothing happens.
Last hope for service with a programmer.

Good evening (day) just a few days ago, I had to take the phone to one of the branches of the SC (warranty, but not NOKIA) due to the rapid loss of charge (the phone is in use for the 8th month)

The staff found the problem, successfully eliminating it, but taking the phone back, I immediately noticed the display with an unusual, alypisty color brightness (cheap) and the absence of past clarity and contrast.

Tell me (if someone had a similar experience) how to verify the authenticity of the original part (display)? Maybe there is a label on it? Could they quietly lend a Chinese counterpart? Thanks in advance for your reply.

SunnyWay,
rather, everything dismantled burst display

Prikol than has microSDHC card transcent Premium 300k 32 Gb - controller au6366 / au6371 (Alcor). It was in the old phone Samsung Galaxy Core 2 duo (SM-G355H), worked fine, although there are sometimes bugs in the form that he had not seen her. Time passed - the unit refused to see her on the segment. Inserted into the laptop through a card reader - a beggar, he writes all memory 512KB, although it detects. What tools can it be restored? On the new machine 64 gig on board, it is, in principle, there and tries not necessary, but in principle, the additional memory is not hurt, and that the most interesting slot The Samsung does not see any other cards when the PC them calmly sees, as I understand it is not OK. What advise do with the map - throw it tries, or how it is possible to revive it?



Post has been editedVladimirzp - 29.05.17, 23:07

exactly

Posted 05/29/2017 23:44:

Vladimirzp
In the new device, I would not have to put it. Find a camera and make a format there, if it does not help you boldly into the furnace

Good day!
Tell me, please, is there a possibility of repairing Meiigoo M1?
Crashed, fell down the stairs, the lid flew off and he fairly scratched the insides. It is necessary to replace the camera (both do not work, but if it is possible, then replacement of one will suffice: D) and the battery (it works, but it is crushed).
The phone worked for 2 days regularly after a fall, but after a reboot it does not turn on - No command. The ROM may be damaged, so it cannot boot?
Before the reboot everything was fine, the front camera worked, only the rear one did not.

Thanks in advance for the answer!
Moscow

Hello
redmi 6a is locked with a bootloader - there is an inside of my account - it does not plow the system, fastboot and recovery - in two major services referred to the problem with edl authorization - where can blow a USB flash drive and flash the programmer? All the phone is alive, the phone is zero, china - was flashed with a globalk with a dummy lock due to inattention in my flash.
There is a full backup in TvRP, except for the date section.
Need a sensible service in Moscow.

atvator
you can raise, write in a personal

Ipad mini 4
Is it possible to restore the plug?

And where in Moscow in the south can glue the glass, which is on the UV glue?

Huawei p20pro, you need to replace the glass cover your two rear cameras. Who can replace qualified? thank

Who can help in St. Petersburg, once again urgently need to solder the contact charging connector to the battery of the smartphone. It is advisable to close to the center.

Who in Petersburg could sew rutirovany Samsung Galaxy Note 3 (SM-N9005) on Android 4.4.2 to Android 5 and up to the same Ruth and xposed?