> Attention!

Creating topics in this section is not available. If you haven't found a discussion of your problem in this section, you can create a topic inmain section.



Error 4013 when restoring | [ITunes]



Rep: (1)
iPhone 4s 4013 error when restoring

iPhone 4s 16Gb PCT
Firmware: iOS 7.1

Jailbreak : Not
Description of the problem:
Good afternoon. The phone was off regularly in the charged state, after which it stopped turning on. When you try to turn on: the screen with the logo flashes periodically. Indication of low charge, but not charging from the network or from the computer. The cable is original.


There have been actions:
When trying to restore from Recovery mode = error 4013. DFU = similarly. In both modes, itunes sees the phone in recovery mode, but the process is interrupted with the indicated error. Now when you turn on (or connect to the charger), the phone immediately shows Recovery mode. Unambiguously service or still compete?




Rep: (0)
Guys, there was an error 4013, disconnected the plumes of the screen, the camera, the camera, the error 3196 began to climb out, connected the screen back, again 4013, what should I do?



Rep: (0)
either in the cable of the sensor kz or nand. if the sensor cable is disconnected, the standards are sewn, then just change it. 5 minutes ago so the problem was solved. when the cable was damaged, there was a reboot on the red screen.



Rep: (0)
Damn, also a mistake 4013. Iphone 4s. I put the firmware 6.1.3 recovery through aytyuns. An apple and a strip appear on the iPhone. But the strip does not fill up and after 3 minutes, the iTunes string appears. Does it mean something with NAND memory or what?



Rep: (0)
Everything, the problem is solved! As it turned out, it was necessary to simply upgrade Itunes from version 12.4.3 to 12.9.4. So be careful. Good luck to all!



Rep: (0)
Help guys! Iphone 5S was working, it worked perfectly for years, I didn’t touch anyone until I picked it up and didn’t update it using a non-original 2m USB cable via Itunes ... at the end of the update process, Itunes issued a “4013 error” and Iphone 5S left in state:
Attached Image

when connected to a computer (on the original cord), Win7 writes "the device is not recognized." Rebooting the computer / iPhone, changing cables does not help ... tell me what can I do?



Rep: (0)
iPhone 6 c error 4013. short-audio codec and elsewhere. Regained all turned on



Rep: (0)
Darik1823 @ 08.05.19, 14:59*
Itunes just update from version 12.4.3 to 12.9.4
+ Confirm!
Only reached the middle, after rebooting computer, everything went smoothly!

Post has been editedaiv - 05.08.19, 15:35



Rep: (3)
Freezer helped, but sometimes the phone itself otklyuchaetsya se, include only poluchaetsya podtyknuv charger, who faced with recently changed the battery, shut down a week later, as a result of 4013, freezer and then have written



Rep: (27)
put the window (the refrigerator was not on hand) in the bag, took out half an hour - I ask in DFU mode: ohmy:

Post has been editedtwe777 - 03.12.19, 11:48



Rep: (52)
iPad mini 3 error 4013 when trying to alter in the SPU. Cyclical restart. But between reboots red screen for 1 second. Refrigerator tried mistake 9, too, as his companion above. And swear to Nand. When heated poyalnym hairdryer loading bar appears but then again 4013.
And when he would have to know from specialists how you blow Nand? Just a hairdryer and then just shoot tongs?

Post has been editedfixafixa - 15.12.19, 09:19



Rep: (9)
* fixafixa,
There need not makeshift repairs



Rep: (52)
* tinman
I'll try to find out whether the replacement Nand possible price tag in the region of a new nurse 5k mini3 64 WiFi 14k.
Is there a point here I think ?!
And Simcoe for 1500 more.

Post has been editedfixafixa - 20.12.19, 08:39



Rep: (0)
Hello to all! IPhone Phone 8, 1 point, simply turn off. When firmware in DFU bug 4005, then constantly 4014. Worked fine a month after purchase with it. Also I read earlier about the tricks to freezing and warming. The first try - (?) Error 9, 2015 and 2006. It remains only to give up in the ASC.

Post has been editedEvgenij75d - 23.12.19, 00:44



Rep: (0)
Hello. : Blush:
The situation is this: 6s are not usually bought embroidered in MTS. Besil znachok GPS when dastaosh phone from his pocket. When razblokiruesh it disappeared within seconds. And so again lying in the pocket GPS appeared. Well, I think I downloaded Tenorshare_ReiBoot schaz repaired. As a result, bodies stuck in Recavery Loop, and back you can go out through the same program. But she ska fee, with a discount of 85% just - zamanuha Ogogo.
Later downloaded firmware and related prog-type Umbrella and etc. I not chayanno stumbled upon .dll Fail to crack the very Tenorshare_ReiBoot - one click and everything is in order, and the day in the life struck ((Somehow perehotelos look for the cause of the GPS icon in the "idle"

that does not give PS firmware on the result of 4013

Post has been editeddefotenbah - 16.01.20, 16:33



Rep: (127)
* defotenbah,
and you can just read the instructions and just go into the settings and disable the appearance of geolocation icons for system services, but, as for me, it is very useful

Post has been editedt.r.o.n. - 16.01.20, 16:50



Rep: (3)
Drowned iPhone 6s somewhere half a year ago, yesterday for fun put on charge and turned, he was involved, but at the start when entering the password freezes and restarts, decided to flash the error 4013
what programs you are not just trying to flash (restore) all in vain, the display is ideal pokyzvaet strangely)
Are there any solutions?



Rep: (40)
nestoryz @ 22.01.20, 13:36*
Are there any solutions?

The theme of several solutions:
1) freeze
2) warm fee
3) SO
I took the first point and the set times and stitching with DFU and without onnogo - with different cables and USB-ports, and COMP are different too ...
To date, I poisoned in SC, waiting for the results ...
P.S. body iPhone 7 Plus 128 Gb

Post has been editedBadindeed - 23.01.20, 17:55



Rep: (3)
* Badindeed
right now just decided to take it out of rekaveri several times drove password hanged, then he began to attempt to restore, on a white screen, and if not strange, he joined and now works
of the minuses
the front camera is not working (and it is clear he was utoplenik)
frontalki quiet microphone
Works -
microphone
speakers
sensor
All basically work
Now Trouble is that when you try to sew all the same 4013 error
when you try to update from the phone says, "could not be found podlkyuchenie Internet (tried and wifi and mobile internet) Net working himself incidentally

Post has been editednestoryz - 23.01.20, 19:17



Rep: (40)
nestoryz @ 23.01.20, 18:16*
Now Trouble is that when you try to sew all the same 4013 error

There is now need to play in the cables / ports / computers, plus everything Tuna update to the latest version, update Windows and be sure to sew through the DFU



Rep: (0)
good time. there was a problem with the iPhones 5s. I lay 4 months without charge. now weighs lace. Comp does not determine aytyuns not see reybut also zero. help to solve the problem


Full version    

Help     rules

Time is now: 28/06/20, 23:13