VS IP015 other android dvb-t2 / s2 digital consoles - Discussion | [TV Box] [DVB-T2 / S2] [AMLogic 8726-MX]
DiscussionVS IP015 ; XENIC SMART MEDIA BOX DVB-T2, model DVB-2241 ; Smart TV BOX VenBOX iTV04 Dekoder DVB-T WiFi ; Prima PM-6001 ; Booox Smart X ; VIGICA C70T ; VIGICA C60T ; GoTV Recording on AMLogic 8726-MX dual core processor
DiscussionVideostrong K1 ; VIGICA C90T ; VIGICA C100T ; Android TV BOX VenBOX ITV-K1 ; VENZ K1 on Amlogic S805 quad-core processor
Android DVB-T2 / S2 Prefix
Discussion »
All consoles represented in the topic under the trade namesVS IP015 ; XENIC SMART MEDIA BOX DVB-T2, model DVB-2241 ; Smart TV BOX VenBOX iTV04 Dekoder DVB-T WiFi ; Prima PM-6001 ; Booox Smart X ; VIGICA C70T ; VIGICA C60T ; GoTV Recording They have the same stuffing and firmware, and are able to simultaneously receive a digital signal in DVB-T2 / T standards (EN 302755 / EN 300744).
A site dedicated to Android TV BOX consoles with built-in DVB-S2 / DVB-T2 tuners for receiving digital terrestrial and satellite TVhttp://hdbox.ws/(The topic has links to this site, some of the firmware in the topic header is taken from this site).
Photo Booox Smart X
Photo of VIGICA C60T
Photo of VIGICA C70T
Photo GoTV Recording
True 1080 to g18ref
Post has been editedklich007 - 28.08.16, 13:07
DiscussionVideostrong K1 ; VIGICA C90T ; VIGICA C100T ; Android TV BOX VenBOX ITV-K1 ; VENZ K1 on Amlogic S805 quad-core processor
Android DVB-T2 / S2 PrefixDiscussion »
- To compare the device with competitors and on the choice of devices, please contact:Selection and Comparison
- Before posting photos, read the topicWorking with Images on the forum
- Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
All consoles represented in the topic under the trade namesVS IP015 ; XENIC SMART MEDIA BOX DVB-T2, model DVB-2241 ; Smart TV BOX VenBOX iTV04 Dekoder DVB-T WiFi ; Prima PM-6001 ; Booox Smart X ; VIGICA C70T ; VIGICA C60T ; GoTV Recording They have the same stuffing and firmware, and are able to simultaneously receive a digital signal in DVB-T2 / T standards (EN 302755 / EN 300744).
A site dedicated to Android TV BOX consoles with built-in DVB-S2 / DVB-T2 tuners for receiving digital terrestrial and satellite TVhttp://hdbox.ws/(The topic has links to this site, some of the firmware in the topic header is taken from this site).
Information about models and standards for receiving a TV signal
Information about the models of consoles on AML-8726-MX (dual-core)
VS IP015 android dvb-t2 digital set-top box on AML-8726-MX
Products webpagehttp://www.videostrong.com/productshow.asp...861&sid=248
XENIC SMART MEDIA BOX DVB-T2, model DVB-2241 Polish version of the console
seller's websitehttp://www.xenic.pl/pr…smart-media-box-dvb-t2
polish device forumhttp://forum.emitel.pl/viewtopic.php?f=36&t=6012
User manual for VS IP015 (in Polish)Yandex mail.ru
Smart TV BOX VenBOX iTV04 Dekoder DVB-T WiFi Polish version of the console
seller's websitehttp://www.vensys.pl/a…z-dekoderem-dvb-t.htmlOn the page there is a description of the product, there is also a section for downloading firmware and instructions.
Prima PM-6001 android dvb-t2 digital set-top box on AML-8726-MX for sale in China
Prima PM-6001 appeared later unlike VS IP015 with metal case has a plastic housing. At Prima PM-6001 is no USB port on the front panel and the POWER button, "CH-", "CH +", another panel, in appearance similar to a remote control from the consoles Elect (with Elekta is not compatible). The board has unsoldered connector com-port VS IP015 at this connector is not soldered. Pay at PM-6001 REV1.1 is the same as in the later VS IP015. At Prima PM-6001 has no problems with the range of the console, at VS IP015 has a problem with a range of features of the body (with body taken out of the normal range of board up to 5-6 meters in the case of 1-2 meters).
Booox Smart X Russian version of the console VS IP015 android dvb-t2 digital prefix (Post # 32542239)
Products webpagehttp://www.booox.ru/smart_x.html
The console has a metal case similar to VS IP015, the front panel has a slightly different design. It has a USB connector and POWER, "CH-", "CH +" buttons, a digital indicator does not differ from VS IP015. The remote with large buttons is the same as the variety of the Prima PM-6001.
PrefixVIGICA C70T appeared in September 2014, the body is plastic, the remote is the same as the latest models Prima and Booox smart x. The original firmware was tested on VS IP015, the device works with it.
Products webpagehttp://www.vigica.cc/
PrefixVIGICA C60T appeared in September 2014, the metal body, slightly different from the front panel Booox smart x The console is the same as the latest models Prima and Booox smart x. The original firmware was tested on VS IP015, the device works with it.
Products webpagehttp://www.vigica.cc/
There are satellite optionsVIGICA C70S and VIGICA C60S have the name of the firmware g18ref_th12, different from our model g18ref_th2. Also appeared satellite versions of Prim with firmware g18ref_th12.
GoTV Recording Spanish version of the console
The plastic case on the front panel does not have a USB connector, the console is like the latest versions of the VIGICA, Prima, Booox Smart X console. The original firmware was tested on the VS IP015 with which the device works.
Products webpagehttp://www.ten-go.com/…d-tv/tv/gotv-recording
Products webpagehttp://www.videostrong.com/productshow.asp...861&sid=248
XENIC SMART MEDIA BOX DVB-T2, model DVB-2241 Polish version of the console
seller's websitehttp://www.xenic.pl/pr…smart-media-box-dvb-t2
polish device forumhttp://forum.emitel.pl/viewtopic.php?f=36&t=6012
User manual for VS IP015 (in Polish)Yandex mail.ru
Smart TV BOX VenBOX iTV04 Dekoder DVB-T WiFi Polish version of the console
seller's websitehttp://www.vensys.pl/a…z-dekoderem-dvb-t.htmlOn the page there is a description of the product, there is also a section for downloading firmware and instructions.
Prima PM-6001 android dvb-t2 digital set-top box on AML-8726-MX for sale in China
Prima PM-6001 appeared later unlike VS IP015 with metal case has a plastic housing. At Prima PM-6001 is no USB port on the front panel and the POWER button, "CH-", "CH +", another panel, in appearance similar to a remote control from the consoles Elect (with Elekta is not compatible). The board has unsoldered connector com-port VS IP015 at this connector is not soldered. Pay at PM-6001 REV1.1 is the same as in the later VS IP015. At Prima PM-6001 has no problems with the range of the console, at VS IP015 has a problem with a range of features of the body (with body taken out of the normal range of board up to 5-6 meters in the case of 1-2 meters).
Booox Smart X Russian version of the console VS IP015 android dvb-t2 digital prefix (Post # 32542239)
Products webpagehttp://www.booox.ru/smart_x.html
The console has a metal case similar to VS IP015, the front panel has a slightly different design. It has a USB connector and POWER, "CH-", "CH +" buttons, a digital indicator does not differ from VS IP015. The remote with large buttons is the same as the variety of the Prima PM-6001.
PrefixVIGICA C70T appeared in September 2014, the body is plastic, the remote is the same as the latest models Prima and Booox smart x. The original firmware was tested on VS IP015, the device works with it.
Products webpagehttp://www.vigica.cc/
PrefixVIGICA C60T appeared in September 2014, the metal body, slightly different from the front panel Booox smart x The console is the same as the latest models Prima and Booox smart x. The original firmware was tested on VS IP015, the device works with it.
Products webpagehttp://www.vigica.cc/
There are satellite optionsVIGICA C70S and VIGICA C60S have the name of the firmware g18ref_th12, different from our model g18ref_th2. Also appeared satellite versions of Prim with firmware g18ref_th12.
GoTV Recording Spanish version of the console
The plastic case on the front panel does not have a USB connector, the console is like the latest versions of the VIGICA, Prima, Booox Smart X console. The original firmware was tested on the VS IP015 with which the device works.
Products webpagehttp://www.ten-go.com/…d-tv/tv/gotv-recording
Information about the models of consoles on the Amlogic S805 (quad)
Videostrong K1 android dvb-t2 digital console on Amlogic S805
Products webpagehttp: //www.videostrong..howhow.asp? id = 918 & sid = 248
VENZ K1 android dvb-t2 digital console on the Amlogic S805 is similar to Videostrong K1
Android TV BOX VenBOX ITV-K1 Polish version of the console
seller's websitehttp://www.vensys.pl/a…with-dvb-t2-tuner.htmlOn the page there is a description of the product, there is also a section for downloading firmware and instructions.
PrefixVIGICA C90T
Products webpagehttp://www.vigica.cc/r…t2-hd-vigica-c90t.html
http: //www.smartvboxs.…C90T.html#.VYEcYVKUJkE
PrefixVIGICA C100T
Products webpagehttp: //www.smartvboxs.…-box.html#.Vd8Ne323NzY
Similar to the K1 model.
There are satellite options described in the topic consoles
Products webpagehttp: //www.videostrong..howhow.asp? id = 918 & sid = 248
VENZ K1 android dvb-t2 digital console on the Amlogic S805 is similar to Videostrong K1
Android TV BOX VenBOX ITV-K1 Polish version of the console
seller's websitehttp://www.vensys.pl/a…with-dvb-t2-tuner.htmlOn the page there is a description of the product, there is also a section for downloading firmware and instructions.
PrefixVIGICA C90T
Products webpagehttp://www.vigica.cc/r…t2-hd-vigica-c90t.html
http: //www.smartvboxs.…C90T.html#.VYEcYVKUJkE
PrefixVIGICA C100T
Products webpagehttp: //www.smartvboxs.…-box.html#.Vd8Ne323NzY
Similar to the K1 model.
There are satellite options described in the topic consoles
Information about the standards for receiving a TV signal
All consoles represented in the topic under the trade namesVS IP015 ; XENIC SMART MEDIA BOX DVB-T2, model DVB-2241 ; Smart TV BOX VenBOX iTV04 Dekoder DVB-T WiFi ; Prima PM-6001 ; Booox Smart X ; VIGICA C70T ; VIGICA C60T Immersed same stuffing and EEPROM, are capable of simultaneously receiving a digital signal in DVB-T2 / T standards (EN 302 755 / EN 300744). The ability of both standards of the reception signal has initially it does not require additional special changes in device settings, firmware changes, changes in the hardware device (iron). Sellers in the descriptions of the devices do not talk about the full capabilities of the device, in the descriptions of some devices only refers to the reception of DVB-T2, the other DVB-T, which is not true, in fact they are all DVB-T2 / T set-top boxes. When searching for channels in places where there are simultaneously broadcasting two standards DVB-T and DVB-T2 set-top box, will find both types of channels. VS IP015 android dvb-t2 digital set-top box (Post # 29773050)
Due to the fact that the device has a tuner that supports both DVB-T2 / T standards (EN 302755 / EN 300744), the set-top box can work in both of them. Description and photo of the tuner below in the appropriate section.
The device software is universal and suitable for receiving both DVB-T2 / T standards (EN 302755 / EN 300744), the possibility of receiving channels in the dvb-t standard is confirmed by users of the device from Poland, where the broadcast goes to dvb-thttp: //forum.emitel.pl…c.php? p = 188630 # p188630
The console is capable of receiving HD channels, in Poland they are broadcast, below the screen of the channel list is provided by Polish users of the console.
Due to the fact that the device has a tuner that supports both DVB-T2 / T standards (EN 302755 / EN 300744), the set-top box can work in both of them. Description and photo of the tuner below in the appropriate section.
The device software is universal and suitable for receiving both DVB-T2 / T standards (EN 302755 / EN 300744), the possibility of receiving channels in the dvb-t standard is confirmed by users of the device from Poland, where the broadcast goes to dvb-thttp: //forum.emitel.pl…c.php? p = 188630 # p188630
The console is capable of receiving HD channels, in Poland they are broadcast, below the screen of the channel list is provided by Polish users of the console.
Channel List dvb-t Poland
 |
Device photos
Photos of various models of consoles for AML-8726-MX (dual-core)
Photo VS IP015
Photo Prima PM-6001
 |
 |
 |
Photo Prima PM-6001
 |
 |
 |
 |
Photo Booox Smart X
 |
 |
Photo of VIGICA C60T
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Photo of VIGICA C70T
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Photo GoTV Recording
 |
 |
 |
 |
Photos of various models of consoles on Amlogic S805 (quad)
Photo Videostrong K1, VENZ K1
Photo of VIGICA C90T
 |
 |
 |
 |
Photo of VIGICA C90T
 |
 |
 |
 |
 |
 |
Photo board AML-8726-MX (dual core)
Photo board device
Inscriptions on the motherboard
IPTV-AML8726-REV1.1
2013-09-03 (production date September 3, 2013)
The inscription on the tuner board
VS-DVBT2-SI2168-VER1.0
2013.05.28 (production date May 28, 2013)
Tuner and demodulator provided by VladimirKHV VS IP015 android dvb-t2 digital prefix (Post # 29523412)
 |
Inscriptions on the motherboard
IPTV-AML8726-REV1.1
2013-09-03 (production date September 3, 2013)
The inscription on the tuner board
VS-DVBT2-SI2168-VER1.0
2013.05.28 (production date May 28, 2013)
Tuner and demodulator provided by VladimirKHV VS IP015 android dvb-t2 digital prefix (Post # 29523412)
tuner NM120AA
Specificationshttp://www.oriel.ru/catalog/id/197/(Link to a parka with a similar tuner)
supports two DVB-T2 / T standards (EN 302755 / EN 300744)
1xRF antenna input (IEC-TYPE, IEC169-2 female)
1xRF antenna output (IEC-TYPE, IEC169-2 male)
Frequency range: 174-230 MHz (VHF) 470-862 MHz (UNF)
Signal level: -15 ~ -70 dBm
Si2168 demodulator
Specificationshttp://www.oriel.ru/catalog/id/197/(Link to a parka with a similar tuner)
supports two DVB-T2 / T standards (EN 302755 / EN 300744)
1xRF antenna input (IEC-TYPE, IEC169-2 female)
1xRF antenna output (IEC-TYPE, IEC169-2 male)
Frequency range: 174-230 MHz (VHF) 470-862 MHz (UNF)
Signal level: -15 ~ -70 dBm
Si2168 demodulator
 |
Specifications
AML-8726-MX (dual core) specifications
Aml8726-MX processor name
1500 processor operating frequency
Number of cores 2 cores
RAM, GB 1
Flash memory, GB 4
Support microSDHC memory cards up to 32GB in FAT16 / FAT32 / NTFS
Wireless connection
Wi-Fi 802.11 b / g / n, 2.4Ghz
External 3G support Yes
Multi PLP Yes
System
Android 4.2.2 operating system
HD MPEG1 / 2/4, H.264, HD AVC / VC-1, RM / RMVB, Xvid / DivX3 / 4/5/6 Decoded Video, RealVideo8 / 9/10
Avi / Rm / Rmvb / Ts / Vob / Mkv / Mov / ISO / wmv / asf / flv / dat / mpg / mpeg video formats
MP3 / WMA / AAC / WAV / OGG / AC3 ​​/ DDP / TrueHD / DTS / DTS / HD / FLAC / APE audio formats
HD image formats JPEG / BMP / GIF / PNG / TIFF
Adobe Flash 11.1 support
Language Russian, English, etc.
Ports
Interface connectors
RF output, Ethernet: 10 / 100M, standard RJ-45 connector, RF input, USB 2.0 Host - 3pcs (including OTG support), S / PDIF - digital audio output, DC5V / 2A, 3.5mm - headphone output, HDMI 1.4
Dimensions and weight
Black colour
Dimensions (LxWxD) mm 142.3 * 108.6 * 21
Weight, 200g
Equipment
Instructions, RCA cable, Remote Control, Power Supply 220 v
AirPlay support, XBMC and Torrent TV support, support for external keyboard, mouse, hard disk, etc. USB devices, Dolby TrueHD and DTS HD via HDMI, 3D graphics accelerator (support for hardware decoding for 1080p resolution)
1500 processor operating frequency
Number of cores 2 cores
RAM, GB 1
Flash memory, GB 4
Support microSDHC memory cards up to 32GB in FAT16 / FAT32 / NTFS
Wireless connection
Wi-Fi 802.11 b / g / n, 2.4Ghz
External 3G support Yes
Multi PLP Yes
System
Android 4.2.2 operating system
HD MPEG1 / 2/4, H.264, HD AVC / VC-1, RM / RMVB, Xvid / DivX3 / 4/5/6 Decoded Video, RealVideo8 / 9/10
Avi / Rm / Rmvb / Ts / Vob / Mkv / Mov / ISO / wmv / asf / flv / dat / mpg / mpeg video formats
MP3 / WMA / AAC / WAV / OGG / AC3 ​​/ DDP / TrueHD / DTS / DTS / HD / FLAC / APE audio formats
HD image formats JPEG / BMP / GIF / PNG / TIFF
Adobe Flash 11.1 support
Language Russian, English, etc.
Ports
Interface connectors
RF output, Ethernet: 10 / 100M, standard RJ-45 connector, RF input, USB 2.0 Host - 3pcs (including OTG support), S / PDIF - digital audio output, DC5V / 2A, 3.5mm - headphone output, HDMI 1.4
Dimensions and weight
Black colour
Dimensions (LxWxD) mm 142.3 * 108.6 * 21
Weight, 200g
Equipment
Instructions, RCA cable, Remote Control, Power Supply 220 v
AirPlay support, XBMC and Torrent TV support, support for external keyboard, mouse, hard disk, etc. USB devices, Dolby TrueHD and DTS HD via HDMI, 3D graphics accelerator (support for hardware decoding for 1080p resolution)
Firmware and getting root
AML-8726-MX firmware (dual core)
Firmware
For DVB-T2 version digital terrestrial terrestrial TV (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV (g18ref_th12)
For DVB-T2 version digital terrestrial terrestrial TV (g18ref_th2) modified taken from the sitehttp://hdbox.ws/
For DVB-T2 version digital terrestrial terrestrial TV firmware forVenSys Smart TV BOX VenBOX iTV04 Dekoder DVB-T WiFi (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV firmware forBooox Smart X (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV firmware forVIGICA C60T (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV firmware forVIGICA C60T (g18ref_th12)
For DVB-T2 version digital terrestrial terrestrial TV firmware forVIGICA C70T (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV firmware forGoTV Recording (g18ref_th2)
Firmware
For DVB-S2 satellite TV version (g18ref_th2)
For DVB-S2 version satellite TV (g18ref_th12)VIGICA C60S , VIGICA C70S , new satellite versions Prima
On the VIGICA C60S, VIGICA C70S, the new Prima satellite versions have the opportunity to install the modified firmware from the GuRuLviv instruction below.
For DVB-S2 satellite TV versionVIGICA C60S (g18ref_th12)
For DVB-S2 satellite TV versionVIGICA C70S (g18ref_th12)
Please contact the owners of this device if you have a new firmware please write about it in the subject line and give a link to download. The firmware will be added to the firmware section of this topic.
For DVB-T2 version digital terrestrial terrestrial TV (g18ref_th2)
For DVB-T2 version
Firmware dated 10/17/2013http://yadi.sk/d/uRtw42xEDuCK6provided by see2
Firmware dated 11/27/2013http://yadi.sk/d/7taPECcDDaG4cprovided by iv_sa
Firmware dated 11/27/2013http://yadi.sk/d/vd_BtXI9Dvippprovided by sbabich
Firmware dated 12/19/2013Yandex mail.ruprovided by evgper514
Firmware from 01/13/2014Yandex google mail.ruprovided by GuRuLviv
Polish firmware from 01/22/2014 different tuned logo tuner works
Polish site Yandex mail.ruprovided by iv_sa
Firmware dated 03.03.2014Yandex mail.ru googleprovided by sbabich
Firmware dated 03/17/2014Yandex mail.ruprovided by GuRuLviv
Firmware dated 03.29.2014Yandex mail.ruprovided by GuRuLviv
Firmware dated 04/03/2014Yandex mail.ruprovided by GuRuLviv
Polish firmware from 04/23/2014Yandex mail.ruprovided by GuRuLviv
Firmware dated 06.16.2014Yandex mail.ru googleprovided by sbabich feature in the TV viewer the opportunity to turn off the power on the antenna jackVS IP015 android dvb-t2 digital set-top box (Post # 32474918)
Firmware dated September 4, 2014googleprovided by GuRuLviv
Firmware dated 11/27/2013http://yadi.sk/d/7taPECcDDaG4cprovided by iv_sa
Firmware dated 11/27/2013http://yadi.sk/d/vd_BtXI9Dvippprovided by sbabich
Firmware dated 12/19/2013Yandex mail.ruprovided by evgper514
Firmware from 01/13/2014Yandex google mail.ruprovided by GuRuLviv
Polish firmware from 01/22/2014 different tuned logo tuner works
Polish site Yandex mail.ruprovided by iv_sa
Firmware dated 03.03.2014Yandex mail.ru googleprovided by sbabich
Firmware dated 03/17/2014Yandex mail.ruprovided by GuRuLviv
Firmware dated 03.29.2014Yandex mail.ruprovided by GuRuLviv
Firmware dated 04/03/2014Yandex mail.ruprovided by GuRuLviv
Polish firmware from 04/23/2014Yandex mail.ruprovided by GuRuLviv
Firmware dated 06.16.2014Yandex mail.ru googleprovided by sbabich feature in the TV viewer the opportunity to turn off the power on the antenna jackVS IP015 android dvb-t2 digital set-top box (Post # 32474918)
Firmware dated September 4, 2014googleprovided by GuRuLviv
For DVB-T2 version digital terrestrial terrestrial TV (g18ref_th12)
Firmware dated 10/15/2014 firmwareYandexboot mapYandexprovided by sbabich
Firmware dated 11/24/2014mail.ruprovided by sbabich
to upgrade from the g18ref_th2 firmware, you need to write to the microSD card the unpacked contents of the boot card archive and the zip firmware file (do not unpack it)VS IP015 android dvb-t2 digital prefix (Post # 35281664)
Firmware dated 11/24/2014mail.ruprovided by sbabich
to upgrade from the g18ref_th2 firmware, you need to write to the microSD card the unpacked contents of the boot card archive and the zip firmware file (do not unpack it)VS IP015 android dvb-t2 digital prefix (Post # 35281664)
For DVB-T2 version digital terrestrial terrestrial TV (g18ref_th2) modified taken from the sitehttp://hdbox.ws/
For DVB-T2 modified versions
Based on the original firmware from 06/16/2014Yandexprovided by GuRuLviv
Features
In the firmware except the root-sewn:
XBMC 14 by oman
Android Tuner
TorrentTV
Adfree
N64oid
Skype
MX Player Version: 1.7.28
LazyMedia version: 1.31
LazyMediaPlus version: 2.02
Neutron Music Player Version: 1.78.2
IPTV version: 2.8.0
mediacenter 0.2.7
eWeather HD v5.3.9
SuperSU
Tested for playing DTS and AC3. Control by CEC-HDMI.
3 launchers and XBMC are pre-installed.
Font changed to readable
XBMC 14 by oman
Android Tuner
TorrentTV
Adfree
N64oid
Skype
MX Player Version: 1.7.28
LazyMedia version: 1.31
LazyMediaPlus version: 2.02
Neutron Music Player Version: 1.78.2
IPTV version: 2.8.0
mediacenter 0.2.7
eWeather HD v5.3.9
SuperSU
Tested for playing DTS and AC3. Control by CEC-HDMI.
3 launchers and XBMC are pre-installed.
Font changed to readable
For DVB-T2 version digital terrestrial terrestrial TV firmware forVenSys Smart TV BOX VenBOX iTV04 Dekoder DVB-T WiFi (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV firmware forBooox Smart X (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV firmware forVIGICA C60T (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV firmware forVIGICA C60T (g18ref_th12)
Firmware dated December 5, 2014Yandexprovided by Jeka_R
For DVB-T2 version digital terrestrial terrestrial TV firmware forVIGICA C70T (g18ref_th2)
For DVB-T2 version digital terrestrial terrestrial TV firmware forGoTV Recording (g18ref_th2)
Firmware dated 09/25/2014Yandexprovided by GuRuLviv
Firmware
For DVB-S2 satellite TV version (g18ref_th2)
For DVB-S2 version
Firmware for satellite version of the console can be downloaded on the websitehttp://hdbox.ws/
Firmware dated 01.22.2014http://yadi.sk/d/o1w4zGBiHim2gprovided by VladimirKHV
Firmware dated 01.22.2014http://yadi.sk/d/o1w4zGBiHim2gprovided by VladimirKHV
For DVB-S2 version satellite TV (g18ref_th12)VIGICA C60S , VIGICA C70S , new satellite versions Prima
On the VIGICA C60S, VIGICA C70S, the new Prima satellite versions have the opportunity to install the modified firmware from the GuRuLviv instruction below.
For DVB-S2 satellite TV versionVIGICA C60S (g18ref_th12)
For DVB-S2 satellite TV versionVIGICA C70S (g18ref_th12)
Firmware dated 08.25.2014 for VIGICA C70SYandex(zip firmware file inside rar archive) provided by iv_sa
Please contact the owners of this device if you have a new firmware please write about it in the subject line and give a link to download. The firmware will be added to the firmware section of this topic.
Amlogic S805 firmware (quad)
Firmware
For DVB-T2 version digital terrestrial terrestrial TV Videostrong K1, VENZ K1
For DVB-T2 version digital terrestrial TV VIGICA C90T
For DVB-S2 version digital terrestrial TV VIGICA C90S
Please contact the owners of this device if you have a new firmware please write about it in the subject line and give a link to download. The firmware will be added to the firmware section of this topic.
For DVB-T2 version digital terrestrial terrestrial TV Videostrong K1, VENZ K1
For DVB-T2 version
For DVB-T2 version digital terrestrial TV VIGICA C90T
Firmware for Vigica C90T ver. 1 Russified
Download card + firmware from 02/11/2015Yandexprovided by Torgard
Firmware dated 02/11/2015Yandexprovided by Torgard
Download card dated 03/20/2015Yandexprovided by iv_sa
Download card + firmware from 02/11/2015Yandexprovided by Torgard
Firmware dated 02/11/2015Yandexprovided by Torgard
Download card dated 03/20/2015Yandexprovided by iv_sa
For DVB-S2 version digital terrestrial TV VIGICA C90S
Please contact the owners of this device if you have a new firmware please write about it in the subject line and give a link to download. The firmware will be added to the firmware section of this topic.
Installing modified firmware from GuRuLviv to VIGICA C60S, VIGICA C70S
Installing modified firmware from GuRuLviv on VIGICA C60S , VIGICA C70S , new satellite versions of Prima and return the original firmware VIGICA Android + DVB-S2 (Post # 34558469)
1. The “There†option is sewing correctly from geeks to my software - for this you will needrecovery kitWell, the firmware itself, for examplesigned_oscam_dvb-s2_prima_8188_v18_byGuRu. Next on the USB flash drive formatted for the early record of unbrick_vs-ip015 files aml_autoscript boot.img factory_update_param.aml recovery.img u-boot.bin unlock_autoscript, 6 files and without the flash, then on the stick tighter with 6 throws firmware files signed_oscam_dvb-s2_prima_8188_v18_byGuRu and change it name on S2-20140408-8188.zip (that which is written in a script that, would not steamed with them). With pretty face vleshku inserted into the player and connect the power. After a few seconds of dark screen will refresh and will be sewn, if for some reason thrown out abnormal in rekaveri boldly in it, and choose the firmware zashomsya.
2. The "Back" option is much simpler,the geek is already ready mega Yandexand do according to their instructions. We transfer all the files from the archive to an early formatted USB flash drive, insert it into the device, then power up and wait for the update with a smart look after which the erasure will go under which you need to pull the USB flash drive out of the device.
2. The "Back" option is much simpler,the geek is already ready mega Yandexand do according to their instructions. We transfer all the files from the archive to an early formatted USB flash drive, insert it into the device, then power up and wait for the update with a smart look after which the erasure will go under which you need to pull the USB flash drive out of the device.
Android 4.2.2 sources
Required programs
SDcardMaker to create a bootable SD card
Links to programs needed for the console
SDcardMaker programhttp: //savagemessiahzine.com/forum/dl/post/3164703/SDcardMaker.rar
The program is developed under Win XP, under Win 7 run in compatibility mode.
Instructions for using the utility SDcardMakerhttp: //savagemessiahzine.com/forum/dl/post/3164732/readme+%281%29.rar
The program is developed under Win XP, under Win 7 run in compatibility mode.
Instructions for using the utility SDcardMakerhttp: //savagemessiahzine.com/forum/dl/post/3164732/readme+%281%29.rar
Links to programs needed for the console
XBMC program
Prog to manage cechttp: //savagemessiahzine.com/ forum / i… ​​7ebbbfd4f89f8b9750a0f8
Updated MboxSetting with the launch of dvb at startuphttp: //savagemessiahzine.com/ forum / i… ​​511464b00da1ca2dd07726
OTAUpgrade firmware upgrade programhttp: //savagemessiahzine.com/ forum / i ... 58d06378bd85a7143ccc4a
AirPin_LITEhttp: //savagemessiahzine.com/ forum / i… ​​40147cdd3dc3e7efcf3e18
Prog to manage cechttp: //savagemessiahzine.com/ forum / i… ​​7ebbbfd4f89f8b9750a0f8
Updated MboxSetting with the launch of dvb at startuphttp: //savagemessiahzine.com/ forum / i… ​​511464b00da1ca2dd07726
OTAUpgrade firmware upgrade programhttp: //savagemessiahzine.com/ forum / i ... 58d06378bd85a7143ccc4a
AirPin_LITEhttp: //savagemessiahzine.com/ forum / i… ​​40147cdd3dc3e7efcf3e18
Instructions for firmware and recovery
How to reflash granted by see2 VS IP015 android dvb-t2 digital prefix (Post # 27308188)
Firmware via UART (RS 232) (COM port) provided by evgper514 VS IP015 android dvb-t2 digital prefix (Post # 27347712)
The prefix is ​​loaded into recovery after each reboot. provided by krasnji Android + DVB-S2 (Post # 36128671)
Instructions on firmware
If everything works ok, then the firmware update occurs via the upgrade application, select the local upgrade there, you do not need to close anything :)
As a result of experiments, and the like torment (For example in an attempt to change the limit resolution of 1280x720 - all players except the built amlvideoplayer it is a) Yes, the device may not boot completely - then using tweezers closable unsoldered - button on the photo circled in blue. The device comes in rekoveri. (It is easier to get, if it works, selecting the application update any file left, and through it to reboot. Or through Ruth and extended application restart)
Specification: to get to the recovery menu, you need to close the non-soldered button on the turned-off console with tweezers, turn on the power, then you can remove the tweezers and wait for the input to the recovery menu for up to 30 seconds.
On the device also fit the firmware from bluetimes mx5 (they are without dvb-t2). I tried them before. After them this unsoldered button stops working.
Well, in general, if something goes wrong, we take a SD card, format it completely. Then using SDcardMaker, indicating in it u-boot.bin from the firmware (which is 300-400kb), format it again. It should turn out that way!Android Google Smart TV Media Player - Official firmware (OS) (Post # 22551878)(i.e. with 1 more first section).
Copy this card all the files from the archive with the firmware - receive a bootable SD card. Next, the operations described with a needle, close to the marked photos on the red box (7.8 contacts from the edge of the board). When connecting the network cable when LEDs light up - remove the needle. If the TV screen is soon completely turns pink or blush - it means everything is going ok, soon goes automatic flashing. On its last stage (when the progress bar is almost full, and will go in the opposite direction), you can pull out the SD card, and it is possible to repeat flashing after a reboot (do not worry, but wait again).
Download photohttp://yadi.sk/d/Zbe8anSZDvrS4
As a result of experiments, and the like torment (For example in an attempt to change the limit resolution of 1280x720 - all players except the built amlvideoplayer it is a) Yes, the device may not boot completely - then using tweezers closable unsoldered - button on the photo circled in blue. The device comes in rekoveri. (It is easier to get, if it works, selecting the application update any file left, and through it to reboot. Or through Ruth and extended application restart)
Specification: to get to the recovery menu, you need to close the non-soldered button on the turned-off console with tweezers, turn on the power, then you can remove the tweezers and wait for the input to the recovery menu for up to 30 seconds.
On the device also fit the firmware from bluetimes mx5 (they are without dvb-t2). I tried them before. After them this unsoldered button stops working.
Well, in general, if something goes wrong, we take a SD card, format it completely. Then using SDcardMaker, indicating in it u-boot.bin from the firmware (which is 300-400kb), format it again. It should turn out that way!Android Google Smart TV Media Player - Official firmware (OS) (Post # 22551878)(i.e. with 1 more first section).
Copy this card all the files from the archive with the firmware - receive a bootable SD card. Next, the operations described with a needle, close to the marked photos on the red box (7.8 contacts from the edge of the board). When connecting the network cable when LEDs light up - remove the needle. If the TV screen is soon completely turns pink or blush - it means everything is going ok, soon goes automatic flashing. On its last stage (when the progress bar is almost full, and will go in the opposite direction), you can pull out the SD card, and it is possible to repeat flashing after a reboot (do not worry, but wait again).
 |
Download photohttp://yadi.sk/d/Zbe8anSZDvrS4
Firmware via UART (RS 232) (COM port) provided by evgper514 VS IP015 android dvb-t2 digital prefix (Post # 27347712)
It was possible to flash only through UART (RS 232). Stitched with USB-COM cable
from the old Siemens C60, although I once had a COM cable assembled for such purposes,
but in time he was lost. In order not to cut off the phone connector from the cable
I bought an additional connector mate (which is installed on the phone board)
and from it I soldered wires to the receiver board.
I want to share with everyone a brief, but clearly understandable firmware technology!
1. Create a bootable SD (the SD that was created with SDtool did not go).
Be sure to use the program SDcardMaker (under Win7, I used it in the mode
compatibility with Win XP);
2. Connect (solder) the USB-COM cable to the receiver (you may have to change the RX and TX places, if the receiver download line does not appear on the screen);
3. Run the program HyperTerminal (speed 115200);
4. Insert the bootable SD card, pinch the updata-key on the board with tweezers;
5. Turn on the receiver in the network and after 30-40 seconds remove the tweezers;
6. Next, in the HyperTerminal window, enter the data as shown below:
Android Google Smart TV Media Player - Official firmware (OS) (Post # 19245128)
7. Next, I had a failure (the power supply turned off). Those. I can not definitely
say whether to turn off the power from the receiver after erasing SF or not!
By the way, when writing SF, I received a message about an incorrect command SF WRITE ...;
8. Again I turn on the receiver with the installed SD, waiting for a minute, another
Finally, the indicators lit up and the OS boot process started.
That's all!!! It is a pity only spent time - almost two days!
Do not forget to dissolve the wires with a connector for the USB-COM cable and collect
receiver!
On the first photo, the com-port connector on the device board is marked yellow, on the second updata-key button.
from the old Siemens C60, although I once had a COM cable assembled for such purposes,
but in time he was lost. In order not to cut off the phone connector from the cable
I bought an additional connector mate (which is installed on the phone board)
and from it I soldered wires to the receiver board.
I want to share with everyone a brief, but clearly understandable firmware technology!
1. Create a bootable SD (the SD that was created with SDtool did not go).
Be sure to use the program SDcardMaker (under Win7, I used it in the mode
compatibility with Win XP);
2. Connect (solder) the USB-COM cable to the receiver (you may have to change the RX and TX places, if the receiver download line does not appear on the screen);
3. Run the program HyperTerminal (speed 115200);
4. Insert the bootable SD card, pinch the updata-key on the board with tweezers;
5. Turn on the receiver in the network and after 30-40 seconds remove the tweezers;
6. Next, in the HyperTerminal window, enter the data as shown below:
Android Google Smart TV Media Player - Official firmware (OS) (Post # 19245128)
7. Next, I had a failure (the power supply turned off). Those. I can not definitely
say whether to turn off the power from the receiver after erasing SF or not!
By the way, when writing SF, I received a message about an incorrect command SF WRITE ...;
8. Again I turn on the receiver with the installed SD, waiting for a minute, another
Finally, the indicators lit up and the OS boot process started.
That's all!!! It is a pity only spent time - almost two days!
Do not forget to dissolve the wires with a connector for the USB-COM cable and collect
receiver!
On the first photo, the com-port connector on the device board is marked yellow, on the second updata-key button.
 |
 |
The prefix is ​​loaded into recovery after each reboot. provided by krasnji Android + DVB-S2 (Post # 36128671)
I offer you an option from my post # 1148 with aml_autoscript. Download thisaml_autoscriptcopy to sd root. Turn off the box. Insert the card, turn on, wait a minute on the screen will not be anything.
Turn off. Remove the card. Turn on the box, you can wait about 3 minutes should be deaf on the screen and the indicator is normal. Delete with sd aml_autoscript, then the usual actions for firmware with sd.
Only when you turn on the firmware, be sure to wait for the process to start.
The way heals all the glitches! Wipe smokes aside. If anyone doubts read my posts with problems, no one suggested, all the voiced methods did not help. Recently, I also cured a bug with openelec: flashing, turning everything on. Turning off turn on the remote and hanging on the screen saver. The following flashing led to the same result. Most likely similar problems
Occur because of the remnants of tails when flashing and or erroneous actions when flashing.
Turn off. Remove the card. Turn on the box, you can wait about 3 minutes should be deaf on the screen and the indicator is normal. Delete with sd aml_autoscript, then the usual actions for firmware with sd.
Only when you turn on the firmware, be sure to wait for the process to start.
The way heals all the glitches! Wipe smokes aside. If anyone doubts read my posts with problems, no one suggested, all the voiced methods did not help. Recently, I also cured a bug with openelec: flashing, turning everything on. Turning off turn on the remote and hanging on the screen saver. The following flashing led to the same result. Most likely similar problems
Occur because of the remnants of tails when flashing and or erroneous actions when flashing.
Getting Root
Getting Root AML-8726-MX (dual core)
Getting Root Amlogic S805 (Quad)
Got Root on VS IP015
Acted on instructions from the messageAndroid Google Smart TV Media Player - Official firmware (OS) (Post # 23704227)
How to get RTH (root), a device based on AML8726-M6 (MX) OS 4.2.2
1. Downloading the file (thanks to the Mersey guys)
http: //savagemessiahzine.com/forum/d…6/utoo-root-signed.zip
2. Copy it to a regular usb-stick (memory card - may not be seen by the system) under the FAT file system. FAT32, probably even NTFS
3. Insert the USB flash drive into any port of the device
4. In the application menu, we find UPGRADE / UPDATE
5. There we choose where to get the update (flash drive)
6. The device will reboot and voila.
As I did. Copied downloaded filehttp: //savagemessiahzine.com/forum/d…6/utoo-root-signed.zipto clean a flash drive inserted it into the console. Further done similarly as when you upgrade the firmware Upgrade the app launched it the Local Upgrade in this zip file menu on the flash drive. I clicked on the mouse file. Prefix rebooted. A few minutes (3-5) console there is no output on the TV screen, the display was a clock on flash lit the flame that it is powered up. Thought consoles hung and was about to restart it by eating well too late. I do not know what would cause this premature reboot. Then there was a picture of a bed-robot with a door open on the chest. It took some updating and more console booted as obuchno A9 logo on the screen, then MBOX inscription.
There was a program SuperSU.
To check, Root installed the Android Terminal Emulator program after the su command shows #, then there is a root.
Acted on instructions from the messageAndroid Google Smart TV Media Player - Official firmware (OS) (Post # 23704227)
How to get RTH (root), a device based on AML8726-M6 (MX) OS 4.2.2
1. Downloading the file (thanks to the Mersey guys)
http: //savagemessiahzine.com/forum/d…6/utoo-root-signed.zip
2. Copy it to a regular usb-stick (memory card - may not be seen by the system) under the FAT file system. FAT32, probably even NTFS
3. Insert the USB flash drive into any port of the device
4. In the application menu, we find UPGRADE / UPDATE
5. There we choose where to get the update (flash drive)
6. The device will reboot and voila.
As I did. Copied downloaded filehttp: //savagemessiahzine.com/forum/d…6/utoo-root-signed.zipto clean a flash drive inserted it into the console. Further done similarly as when you upgrade the firmware Upgrade the app launched it the Local Upgrade in this zip file menu on the flash drive. I clicked on the mouse file. Prefix rebooted. A few minutes (3-5) console there is no output on the TV screen, the display was a clock on flash lit the flame that it is powered up. Thought consoles hung and was about to restart it by eating well too late. I do not know what would cause this premature reboot. Then there was a picture of a bed-robot with a door open on the chest. It took some updating and more console booted as obuchno A9 logo on the screen, then MBOX inscription.
There was a program SuperSU.
To check, Root installed the Android Terminal Emulator program after the su command shows #, then there is a root.
Getting Root Amlogic S805 (Quad)
Work with the console interface
Work with the list of channels move, rename, delete, etc.
Opening a hidden menu for developers to enable USB debugging, etc. courtesy of chronomaster VS IP015 android dvb-t2 digital set-top box (Post # 28683397)
To perform operations with the list of channels, go to the programs manager button with the letter (i) in the lower pop-up menu,
select the channel in the list with which we will work it will be highlighted with a blue background and long press OK on the remote
waiting for the menu with a choice of actions
To move the channel, select the item MOVE
pops up window Move to
enter the desired channel number
also with others until we achieve the right order
To rename the channel name, select the EDIT item.
We introduce a new name for the channel (there is support for the Russian language)
To edit the radio list, select the item RADIO
select the channel in the list with which we will work it will be highlighted with a blue background and long press OK on the remote
waiting for the menu with a choice of actions
To move the channel, select the item MOVE
pops up window Move to
enter the desired channel number
also with others until we achieve the right order
To rename the channel name, select the EDIT item.
We introduce a new name for the channel (there is support for the Russian language)
 |
To edit the radio list, select the item RADIO
Opening a hidden menu for developers to enable USB debugging, etc. courtesy of chronomaster VS IP015 android dvb-t2 digital set-top box (Post # 28683397)
Go to the settings, "About phone", 10 times click "Build number", the item "For developers" appears, and the item "Debugging on CSS" is already available there
HDMI-CEC technology support
Support for HDMI-CEC technology (control of the console from the TV remote via HDMI)
The function works only on the modified firmware createdGuRuLviv , you first need to activate this feature in the console, is enabled through the Box sett application.
This function works on TVs of certain manufacturers (data is obtained empirically officially this function is not supported)
Positive feedback works:
Sony TVVS IP015 android dvb-t2 digital set-top box (Post # 32691839)
Samsung tvVS IP015 android dvb-t2 digital prefix (Post # 32987856)
Philips TVVS IP015 android dvb-t2 digital prefix (Post # 33103943)
Does not work:
LG TVs.
The rest of the company manufacturers reviews yet.
Write your feedback in the topic on the work of this function, based on your information, this section will be added or changed
This function works on TVs of certain manufacturers (data is obtained empirically officially this function is not supported)
Positive feedback works:
Sony TVVS IP015 android dvb-t2 digital set-top box (Post # 32691839)
Samsung tvVS IP015 android dvb-t2 digital prefix (Post # 32987856)
Philips TVVS IP015 android dvb-t2 digital prefix (Post # 33103943)
Does not work:
LG TVs.
The rest of the company manufacturers reviews yet.
Write your feedback in the topic on the work of this function, based on your information, this section will be added or changed
Supported External USB Devices
Supported External USB Devices
Manufacturer's recommended devices
AML8726-MX MID QPL 20130205.pdf(84.35 KB)
Keyboard + Mouse
BTC9089URF III
Logitech Wireless Desktop MK260 with Logitech C-U0006 USB Adapter (Vigica C100T Test)
2.4GH Mini Wireless Keyboard Version + Touchpad Mouse Combo
Gi TWK
Openbox Wireless Keyboard
Rii mini i13
Keyboard Trust Compact Wireless Entertainment Keyboard
Keyboards
radio logitech k230Ñ—
Logitech K360 with C-U0007 adapter (Vigica C100T test)
Genius KB-06XE (Vigica C100T Test)
Aeromyshy
jpazzport kp-810-16a
Gyroscope mini Fly Air Mouse T2 2.4G Wireless Keyboard Mouse Android remote control 3D Sense Motion Stick For TVBox
iPazzPort 2.4G RF Mini Wireless Handheld Keyboard Touchpad with Smart TV / PC Remote QWERTY LED light (model C1644)
Mice
A4 tech G6-700
logitech m305
Defender MM-505 Nano BG
Logitech M510 with C-U0007 adapter (Vigica C100T test)
Logitech M-BZ96C (Vigica C100T test)
Joypad
Xbox 360 controller usb
Dialog GP-A11 (need to add driver instructionsVS IP015 android dvb-t2 digital set-top box (Post # 34664565)
Camcorders
A4 tech model PK-600MJ
camera + microphone Logitech HD Webcam C310
Logitech C170
Logitech C270
DEXP H-100 (Vigica C100T test)
USB2.0 to SATA & IDE Adapters
Adapter USB2.0 to SATA & IDE AgeStar FUBCP (adapter for connecting IDE / SATA 2.5 "/ 3.5" devices to USB) with a 1.5TB hard drive
AML8726-MX MID QPL 20130205.pdf(84.35 KB)Keyboard + Mouse
BTC9089URF III
Logitech Wireless Desktop MK260 with Logitech C-U0006 USB Adapter (Vigica C100T Test)
2.4GH Mini Wireless Keyboard Version + Touchpad Mouse Combo
 |
Gi TWK
Openbox Wireless Keyboard
Rii mini i13
Keyboard Trust Compact Wireless Entertainment Keyboard
Keyboards
radio logitech k230Ñ—
Logitech K360 with C-U0007 adapter (Vigica C100T test)
Genius KB-06XE (Vigica C100T Test)
Aeromyshy
jpazzport kp-810-16a
Gyroscope mini Fly Air Mouse T2 2.4G Wireless Keyboard Mouse Android remote control 3D Sense Motion Stick For TVBox
iPazzPort 2.4G RF Mini Wireless Handheld Keyboard Touchpad with Smart TV / PC Remote QWERTY LED light (model C1644)
 |
Mice
A4 tech G6-700
logitech m305
Defender MM-505 Nano BG
Logitech M510 with C-U0007 adapter (Vigica C100T test)
Logitech M-BZ96C (Vigica C100T test)
Joypad
Xbox 360 controller usb
Dialog GP-A11 (need to add driver instructionsVS IP015 android dvb-t2 digital set-top box (Post # 34664565)
Camcorders
A4 tech model PK-600MJ
camera + microphone Logitech HD Webcam C310
Logitech C170
Logitech C270
DEXP H-100 (Vigica C100T test)
USB2.0 to SATA & IDE Adapters
Adapter USB2.0 to SATA & IDE AgeStar FUBCP (adapter for connecting IDE / SATA 2.5 "/ 3.5" devices to USB) with a 1.5TB hard drive
Device sellers
Device sellers and prices
Buy in Russia, Ukraine, Belarus, Polandmodel VenBOX iTV21, VenBOX ITV-K1
Buy in Russiamodel Booox Smart X
Buy in China
Buy in Russia, Ukraine, Belarus, Polandmodel VenBOX iTV21, VenBOX ITV-K1
Seller
VenBOX iTV21 dual core processor
http://www.vensys.pl/a…z-dekoderem-dvb-t.html
price 93USD, delivery from a warehouse in Kiev in Ukraine for 2 days, from a warehouse in Warsaw - Russia and Belarus for 1 week.
Consoles are in stock
VenBOX ITV-K1 quad-core processor
dvb-t2 version
http://www.vensys.pl/a…with-dvb-t2-tuner.html
dvb-s2 version
http://www.vensys.pl/a...with-dvb-s2-tuner.html
To all userssavagemessiahzine.comcoupon 10% discount on the first purchase before the end of the summer. Before payment enter "savagemessiahzine.com"
To contact the seller and purchase, write to their mail specified on the site.http://www.vensys.pl/contacts.html. You can write in Polish, Russian, Ukrainian languages.
VenBOX iTV21 dual core processor
http://www.vensys.pl/a…z-dekoderem-dvb-t.html
price 93USD, delivery from a warehouse in Kiev in Ukraine for 2 days, from a warehouse in Warsaw - Russia and Belarus for 1 week.
Consoles are in stock
VenBOX ITV-K1 quad-core processor
dvb-t2 version
http://www.vensys.pl/a…with-dvb-t2-tuner.html
dvb-s2 version
http://www.vensys.pl/a...with-dvb-s2-tuner.html
To all userssavagemessiahzine.comcoupon 10% discount on the first purchase before the end of the summer. Before payment enter "savagemessiahzine.com"
To contact the seller and purchase, write to their mail specified on the site.http://www.vensys.pl/contacts.html. You can write in Polish, Russian, Ukrainian languages.
Buy in Russiamodel Booox Smart X
Seller Online shop "Antenna market"
http: //antennmarket.ru...fo.php? products_id = 748
For the participants of the forum, delivery to the terminal of any transport company in the city of Nizhny Novgorod is free.
When ordering in the online store Antennial market in the comments you need to specify - Promotionsavagemessiahzine.com
http://www.booox.ru/smart_x.html
Address of sales representative and service center: Russia, Nizhny Novgorodhttp://www.booox.ru/contacts.html
The price of the set-top box is 3250 rubles plus the cost of shipping the set-top box to the addressee by Russian Post.
http: //antennmarket.ru...fo.php? products_id = 748
For the participants of the forum, delivery to the terminal of any transport company in the city of Nizhny Novgorod is free.
When ordering in the online store Antennial market in the comments you need to specify - Promotionsavagemessiahzine.com
http://www.booox.ru/smart_x.html
Address of sales representative and service center: Russia, Nizhny Novgorodhttp://www.booox.ru/contacts.html
The price of the set-top box is 3250 rubles plus the cost of shipping the set-top box to the addressee by Russian Post.
Buy in China
Console salesman Vigica
Shenzhen TopStar Technology Co., Ltd.http: //ru.aliexpress.c...37464_32299284984.html
Shenzhen TopStar Technology Co., Ltd.http: //ru.aliexpress.c...37464_32299284984.html
Useful information
Revision wi-fi Vigica C90T / S
A sourceVS IP015 and other android dvb-t2 / s2 digital set-top boxes (Post pandora12345 # 40655182)
There was a need to make an access point from the C90T. With standard (built-in) antenna
Wifi rang out within a radius of 2-3m.
I bought an antenna in the WiFi radio store (100r), a cable with connectors (200r), installed it, and - a miracle!
The signal on the phone / tablet all divisions throughout the apartment. Problem solved!
There was a need to make an access point from the C90T. With standard (built-in) antenna
Wifi rang out within a radius of 2-3m.
I bought an antenna in the WiFi radio store (100r), a cable with connectors (200r), installed it, and - a miracle!
The signal on the phone / tablet all divisions throughout the apartment. Problem solved!
 |
True 1080 to g18ref
Post has been editedklich007 - 28.08.16, 13:07
Reason for editing: Firmware for Vigica C90T ver. 1 Russified
Feedback on the operation of the device.
In dvb-t2 mode caught all 10 channels are broadcast radio and 3. This suggests that support for Multi PLP available. The remote is not very sensitive to the distance of about 5 meters consoles already badly reacts to the remote signals. Tried to customize learning remote with it the result of too bad, it seems the problem is in the most remote receiver set-top box. BTC wireless mouse on the same distance of 5 meters from the device is working properly. Switch channels with the remote control number buttons, and also the CH + / SH- the OK button brings up a menu with a list of channels. The remote works very poorly, even in the vicinity does not react to button presses. The problem in the most remote receiver set-top box.
If you remove the board with the receiver signal from the console from the console, the sensitivity becomes normal. Alternatively, you can use the extension of the IR remote.
It was not possible to get the firmware from the manufacturer of the set-top box, the Chinese respond, but they refuse to provide the firmware. On the website the corresponding section is empty.
When connected via an analog output (tulips) text on the screen is difficult to make out the maximum you can set the 576i. Testing for LCD TV 32 "FULL HD. When connected to the same TV using HDMI you can select 1080i. The text of the resolution of 1080i read normally. To view the TV enough and analog input, but to read the electronic program guide EPG is problematic. Electronic Program Guide is displayed correctly in Russian language. to properly display the time to choose the time zone for your area. time console gets automatically with the TV tower or over the Internet.
Play Market is installed and initially works. Video playback and mp3, including the network from the computer.
Post has been editediv_sa - 30.11.13, 00:36
In dvb-t2 mode caught all 10 channels are broadcast radio and 3. This suggests that support for Multi PLP available. The remote is not very sensitive to the distance of about 5 meters consoles already badly reacts to the remote signals. Tried to customize learning remote with it the result of too bad, it seems the problem is in the most remote receiver set-top box. BTC wireless mouse on the same distance of 5 meters from the device is working properly. Switch channels with the remote control number buttons, and also the CH + / SH- the OK button brings up a menu with a list of channels. The remote works very poorly, even in the vicinity does not react to button presses. The problem in the most remote receiver set-top box.
If you remove the board with the receiver signal from the console from the console, the sensitivity becomes normal. Alternatively, you can use the extension of the IR remote.
It was not possible to get the firmware from the manufacturer of the set-top box, the Chinese respond, but they refuse to provide the firmware. On the website the corresponding section is empty.
When connected via an analog output (tulips) text on the screen is difficult to make out the maximum you can set the 576i. Testing for LCD TV 32 "FULL HD. When connected to the same TV using HDMI you can select 1080i. The text of the resolution of 1080i read normally. To view the TV enough and analog input, but to read the electronic program guide EPG is problematic. Electronic Program Guide is displayed correctly in Russian language. to properly display the time to choose the time zone for your area. time console gets automatically with the TV tower or over the Internet.
Play Market is installed and initially works. Video playback and mp3, including the network from the computer.
Post has been editediv_sa - 30.11.13, 00:36
There is my partner in the sale of such devices. Available for shipment in Poland and Ukraine. There is a firmware, but there are a lot of errors in it. Now I will reset to Yandex disk. If someone helps in debugging, I will be very grateful, because there’s no help from the manufacturer.
iv_sa,
IPTV or Torrent TV tried?
support wireless mice, clav?
What was sold from?
Post has been editedg9lg9l - 04.12.13, 22:59
IPTV or Torrent TV tried?
support wireless mice, clav?
What was sold from?
Post has been editedg9lg9l - 04.12.13, 22:59
iv_sa, Where did they take, what price tag? Have you tried torrent TV, how do HD channels go through Wi-Fi? And through RJ45?
g9lg9l @ 12/04/2013, 23:51
iv_sa,
IPTV or Torrent TV tried?
support wireless mice, clav?
What was sold from?
IPTV or Torrent TV tried?
support wireless mice, clav?
What was sold from?
I did not try IPTV or TORRENT-TV, I tried to open non-HD video files from a computer, it works via wi-fi and a wire through a router.
I tried to connect the wireless kit mouse + keyboard BTC works fine. I also connected USB computer consoles, they also work fine, but not all buttons. The native remote works poorly because the IR receiver inside the console has a poor sensitivity (I think I should use an IR remote extension when I receive it).
I bought on aliexpress from this seller
http://www.aliexpress.com/item/DVB-T2-Andr...1434215240.html
Abmir 05.12.2013, 00:19
Iv_sa, Where did they take it, what price tag? Have you tried torrent TV, how do HD channels go through Wi-Fi? And through RJ45?
HD has not yet tried it, I basically look through it dvb-t2. Device is switched on permanently in the evening hours of 3-4, it is I have about 1 week, not reflash, but to install additional software, such as a video player. Tried internet radio works. Firmware I have to it are two different. I did not spread to the forum, as they personally experienced. One sent to the user of this forum SEE2, second my seller, firmware on different dates. See2 have the same prefix as mine and he reflash it, sent him a new firmware to the test, he still has not answered.
Sellerhttp://www.aliexpress.com/item/DVB-T2-Andr...1434215240.htmlUS $ 93.80. I bought directly from the Chinese, a manufacturer in China.
[email protected], 16:12
There is my partner in the sale of such devices. Available for shipment in Poland and Ukraine. There is a firmware, but there are a lot of errors in it. Now I will reset to Yandex disk. If someone helps in debugging, I will be very grateful, because there’s no help from the manufacturer.
This firmware that you posted the seller sent me, apparently it is the latter, in my unit costs earlier. Buyers of the consoles there is little written about her purchase of 2 people besides me in the forum, after their comments in another thread, I decided to buy it. I works fine and important work the TV, in another topic wrote that after flashing consoles in a plastic case, she even stopped to catch channels. I'm not a programmer will not be able to fix the firmware, I hope the device will be popular and it will buy those who can understand in Android and be able to make their own, At least on the basis of the existing plant.
Post has been editediv_sa - 05.12.13, 01:06
iv_sa, As I understand it, you are currently using the console mainly as a DVB-T2 decoder. I intend to use such a device mainly for watching IPTV or Torent TV, a digital terrestrial TV-backup option, which is why the work of torrent TV, first of all, HD channels is of interest.
Post has been editedabmir - 05.12.13, 05:25
Post has been editedabmir - 05.12.13, 05:25
iv_sa,
For me, watching DVB-T2 comes first.
Do you have the opportunity to connect a prefix to a CRT TV? Will it be enough to watch movies and Youtube?
Thank.
Post has been editedg9lg9l - 05.12.13, 12:45
For me, watching DVB-T2 comes first.
Do you have the opportunity to connect a prefix to a CRT TV? Will it be enough to watch movies and Youtube?
Thank.
Post has been editedg9lg9l - 05.12.13, 12:45
g9lg9l @ 05.12.2013, 13:43
iv_sa,
For me, watching DVB-T2 comes first.
Do you have the opportunity to connect a prefix to a CRT TV? Will it be enough to watch movies and Youtube?
Thank.
For me, watching DVB-T2 comes first.
Do you have the opportunity to connect a prefix to a CRT TV? Will it be enough to watch movies and Youtube?
Thank.
I have only one CRT 14-inch video on it, you can see, the text is fine, one can hardly read, try to watch video on the wi-fi c computer as the wired internet in the kitchen is not working. HD files are not all normally open, in the MX player audio problems, ES HD player opened normally, but it does not support all formats. Youtube shows bad constantly popping up some strips of the image is on the screen with the image. ivi showing ok. For text better to use HDMI.
I ordered this TV box (VS-IP015, DVB-T2) in China on Aliexpress in early November on Aliexpress, on November 20 I already received it.
This device checked-liked.
I did a little test:
1. Skype video communication (Logitech Web-camera with microphone) is not inferior to PC work !;
2. Support for wireless keyboards and mice (sets) A4tech-works stably;
3. OFDM (DVB-T2) Multiple Frame Mode PLP — Excellent! (shows all ten channels of the first multiplex);
4. Excellent even shows on the indoor antenna installed on the roof of a single-story
private house (and the antenna was connected to the cable in violation of all laws of radio engineering - without coordination);
5. Support many Android apps.
But a number of shortcomings came to light:
1. When you watch digital TV for a long time, the picture sometimes disappears and the words "No AV data" fly out,
but I think that at some point this equipment on the telecentre gives small failures, though ... (with
this signal strength is ~ 90%);
2. When watching a video through the Youtube application in the picture "squares are jumping in stripes", although when watching
these same records from the site through the browser - everything is fine!
3. Well, and the last! After I installed a bunch of applications (I really don’t even remember which ones)
He began to seriously hang! I tried to reset it, but nothing happened, and at some point the device refused to boot!
On the screen, when turned on, the inscription "A9" appears and everything, then the device does not load!
Now I communicate with the seller about the firmware (they promise to send a bootable SD card) ...
Yes, by the way, this device was checked on a CRT TV (15 "), in the kitchen. I had to increase the fonts everywhere to full!
Posted on 12/6/2013 11:08 AM:
Yes, maybe someone can help me with the boot firmware?
This device checked-liked.
I did a little test:
1. Skype video communication (Logitech Web-camera with microphone) is not inferior to PC work !;
2. Support for wireless keyboards and mice (sets) A4tech-works stably;
3. OFDM (DVB-T2) Multiple Frame Mode PLP — Excellent! (shows all ten channels of the first multiplex);
4. Excellent even shows on the indoor antenna installed on the roof of a single-story
private house (and the antenna was connected to the cable in violation of all laws of radio engineering - without coordination);
5. Support many Android apps.
But a number of shortcomings came to light:
1. When you watch digital TV for a long time, the picture sometimes disappears and the words "No AV data" fly out,
but I think that at some point this equipment on the telecentre gives small failures, though ... (with
this signal strength is ~ 90%);
2. When watching a video through the Youtube application in the picture "squares are jumping in stripes", although when watching
these same records from the site through the browser - everything is fine!
3. Well, and the last! After I installed a bunch of applications (I really don’t even remember which ones)
He began to seriously hang! I tried to reset it, but nothing happened, and at some point the device refused to boot!
On the screen, when turned on, the inscription "A9" appears and everything, then the device does not load!
Now I communicate with the seller about the firmware (they promise to send a bootable SD card) ...
Yes, by the way, this device was checked on a CRT TV (15 "), in the kitchen. I had to increase the fonts everywhere to full!
Posted on 12/6/2013 11:08 AM:
Yes, maybe someone can help me with the boot firmware?
Evgper514 @ 12/06/2013, 12:08
Yes, maybe someone can help me with the boot firmware?
The last firmware that I met, posted in the message number 4 of this topic I will duplicate it againhttp://yadi.sk/d/wQWgbIQADnDvP
I personally did not reflash the prefix, read the messages of the user see2 he has the same prefix, he reflash it even in an emergency. You can search for his messages, there he writes about the unsoldered button in the center of the board and about the closure of some contacts with numbers, I have an unsoldered button in the center of the board, next to the processor.
Write the results of the firmware and how to flash it. I have another version of the firmware earlier, I can post it if this does not work.
Good morning!
With this firmware as soon as I did not suffer - everything is in vain !!!!!!
Yes, indeed, in order to enter the firmware mode, you need to clamp two tweezers
contact on the board (holes), near the processor heatsink.
After all the manipulations done, the receiver thought for a long time,
after which a black screen saver appeared on the TV screen (without text) !!! And that's it!
In general, with the firmware, I did not succeed !!!
I ask you to send another firmware!
Are there any other considerations that I have a CRT TV, and after flashing and during flashing, does the device output a HDMI signal?
With this firmware as soon as I did not suffer - everything is in vain !!!!!!
Yes, indeed, in order to enter the firmware mode, you need to clamp two tweezers
contact on the board (holes), near the processor heatsink.
After all the manipulations done, the receiver thought for a long time,
after which a black screen saver appeared on the TV screen (without text) !!! And that's it!
In general, with the firmware, I did not succeed !!!
I have another version of the firmware earlier, I can post it if this does not work.
I ask you to send another firmware!
Are there any other considerations that I have a CRT TV, and after flashing and during flashing, does the device output a HDMI signal?
[email protected], 10:06
Are there any other considerations that I have a CRT TV, and after flashing and during flashing, does the device output a HDMI signal?
This fact was not confirmed! I found a TV, with a friend, with an HDMI input, and when connected to it the same thing - after 1-2 minutes the black screen lights up, and then nothing happens !!!
Posted on 12/7/2013 11:13:
[email protected], 21:10
I have another version of the firmware earlier, I can post it if this does not work.
Iv_sa, I ask you to help with this firmware!
Here is a link to an earlier firmware.http://yadi.sk/d/uRtw42xEDuCK6
Link to see2 message how to flashAndroid Google Smart TV Media Player - Official firmware (OS) (Post # 26048523)
The program SDcardMaker can be found on this forum and instructions for use with pictures, the program in Chinese.
In the latter case, I think we are talking about processor contacts, as I understand it when reading other similar forum messages.
The firmware in an emergency in the form in which it is a device will not understand the need to make a bootable sd-card via SDcardMaker.
It remains to restore from the boot card the first boot option using the button in the center of the board, if it does not help to look for these contacts 7.8.
I have never reflashed my prefix, I can only help with information, it’s a pity there is no author on the forum to find out for sure.
Post has been editediv_sa - 07.12.13, 11:33
Link to see2 message how to flashAndroid Google Smart TV Media Player - Official firmware (OS) (Post # 26048523)
Regarding the firmware - there is an unsoldered button on the board (approximately in the center of the board, update is signed, sort of) - you need to hold it when you turn it on to go into the recovery.
If it does not help, fill the SD card with the SD card using the SD card, insert, close 7.8 contacts with a needle, pull the power back, how the network lights come on, remove the needle.
More than once so razkirpichivat it
If it does not help, fill the SD card with the SD card using the SD card, insert, close 7.8 contacts with a needle, pull the power back, how the network lights come on, remove the needle.
More than once so razkirpichivat it
The program SDcardMaker can be found on this forum and instructions for use with pictures, the program in Chinese.
In the latter case, I think we are talking about processor contacts, as I understand it when reading other similar forum messages.
The firmware in an emergency in the form in which it is a device will not understand the need to make a bootable sd-card via SDcardMaker.
It remains to restore from the boot card the first boot option using the button in the center of the board, if it does not help to look for these contacts 7.8.
I have never reflashed my prefix, I can only help with information, it’s a pity there is no author on the forum to find out for sure.
Post has been editediv_sa - 07.12.13, 11:33
By firmware:
If everything works ok, then the firmware update occurs via the upgrade application, select the local upgrade there, you do not need to close anything :)
As a result of experiments, and the like torment (For example in an attempt to change the limit resolution of 1280x720 - all players except the built amlvideoplayer it is a) Yes, the device may not boot completely - then using tweezers closable unsoldered - button on the photo circled in blue. The device comes in rekoveri. (It is easier to get, if it works, selecting the application update any file left, and through it to reboot. Or through Ruth and extended application restart)
On the device also fit the firmware from bluetimes mx5 (they are without dvb-t2). I tried them before. After them this unsoldered button stops working.
Well, in general, if something goes wrong, we take a SD card, format it completely. Then using SDcardMaker, indicating in it u-boot.bin from the firmware (which is 300-400kb), format it again. It should turn out that way!Android Google Smart TV Media Player - Official firmware (OS) (Post # 22551878)(i.e. with 1 more first section).
Copy this card all the files from the archive with the firmware - receive a bootable SD card. Next, the operations described with a needle, close to the marked photos on the red box (7.8 contacts from the edge of the board). When connecting the network cable when LEDs light up - remove the needle. If the TV screen is soon completely turns pink or blush - it means everything is going ok, soon goes automatic flashing. On its last stage (when the progress bar is almost full, and will go in the opposite direction), you can pull out the SD card, and it is possible to repeat flashing after a reboot (do not worry, but wait again).
The latest firmware until the hands did not reach to check.
Torrent-tv tried, works fine. It is only by itself with glitches, for example, my films are cut off.>2GB on this position.
XBMC tried different, but they or with external players (http://www.xbmcandroid.com/)or black screen during playback or out of sync. If anyone finds a normal one, tell me. Here, for example, prepare linux-firmwarehttp://forum.xda-developers.com/showthread.php?p=44928093under similar devices. I hope it will be finished under ours and it will be stable.
Post has been editedsee2 - 07.12.13, 19:56
If everything works ok, then the firmware update occurs via the upgrade application, select the local upgrade there, you do not need to close anything :)
As a result of experiments, and the like torment (For example in an attempt to change the limit resolution of 1280x720 - all players except the built amlvideoplayer it is a) Yes, the device may not boot completely - then using tweezers closable unsoldered - button on the photo circled in blue. The device comes in rekoveri. (It is easier to get, if it works, selecting the application update any file left, and through it to reboot. Or through Ruth and extended application restart)
On the device also fit the firmware from bluetimes mx5 (they are without dvb-t2). I tried them before. After them this unsoldered button stops working.
Well, in general, if something goes wrong, we take a SD card, format it completely. Then using SDcardMaker, indicating in it u-boot.bin from the firmware (which is 300-400kb), format it again. It should turn out that way!Android Google Smart TV Media Player - Official firmware (OS) (Post # 22551878)(i.e. with 1 more first section).
Copy this card all the files from the archive with the firmware - receive a bootable SD card. Next, the operations described with a needle, close to the marked photos on the red box (7.8 contacts from the edge of the board). When connecting the network cable when LEDs light up - remove the needle. If the TV screen is soon completely turns pink or blush - it means everything is going ok, soon goes automatic flashing. On its last stage (when the progress bar is almost full, and will go in the opposite direction), you can pull out the SD card, and it is possible to repeat flashing after a reboot (do not worry, but wait again).
The latest firmware until the hands did not reach to check.
Torrent-tv tried, works fine. It is only by itself with glitches, for example, my films are cut off.>2GB on this position.
XBMC tried different, but they or with external players (http://www.xbmcandroid.com/)or black screen during playback or out of sync. If anyone finds a normal one, tell me. Here, for example, prepare linux-firmwarehttp://forum.xda-developers.com/showthread.php?p=44928093under similar devices. I hope it will be finished under ours and it will be stable.
photo board
 |
Post has been editedsee2 - 07.12.13, 19:56
By the way, it is embarrassing that the iv_sa on the board has no videostrong inscription. Fig you will understand who does it in China and who sells it)
Also suitable firmware from 10moons D6 (also without dvb-t2) - you can take applications from there, for example. I personally made the boot card with aml_autoscript files, etc. from firmware D6
Alas and oh!
As if I did not try, except for the inscription "A9" nothing appears !!!
Already tried different firmware and everything else !!!
I either turn on the black screen, or the inscription "A9" ....
As if I did not try, except for the inscription "A9" nothing appears !!!
Already tried different firmware and everything else !!!
I either turn on the black screen, or the inscription "A9" ....
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement