Full Stock + Deodex + Root + ZipAligned + Dual Recovery C6903 14.1.G.1.534 PCT 1276-7743 for installation via CWM

+

C6903_14.1.G.1.534_PCT_1276-7743.ftf for Flashtool

Before you get down to business, read the full instructions and evaluate your strengths, as well asDOWNLOAD DOWNLOAD ALL FILES IN INSTRUCTIONS AND PODINSTRUCTIONS ! Slowly on my firmware, backup and restore backup took about 30 minutes (without taking into account the time to download files)
Everything that you do, you do at your age and risk! I do not bear any responsibility for data loss or damage to the device!




As a result, we have: phone withCLOSED Boot, with a working camera and with the modified firmware we need!
*The recovery on a closed boot only works for 40 seconds, so you cannot use it for a full backup yet, but it is possible to run small scripts and install small mods ... it only works 40 seconds, but it works fully! no longer relevant
Note 1: instead of my deodex firmware you can easily get the firmware monxDIFIED Honam1Z в„ў ! This instruction is suitable for installing any custom until Sony corrects the camera on an open bootOr until they finish the recovery, so that there are no reboots every 40 seconds!
Note 2: 40 seconds of recovery is enough for the eyes to put OTA updates for monxDIFIED Honam1Z в„ўno longer relevant
instruction updated to normalworking recoverywithout any 40 second reboots

WHEN COPYPAST AND TRANSFER, IT IS NECESSARY TO POINT THE LINK TO THIS ORIGINAL MESSAGE! RESPECT MY WORK PLEASE!

Post has been editedNikCher - 01.04.14, 18:18

Р—Р«1: thank gitl 'u for the test
Р—Р«2: Now you have a full PCT runoff with a root ... although the phone on the computer is now defined as C69, but this is corrected by handles in build.prop: change the date ro.semc.product.name = after = write what you want ... if there is no such line, then add it, and then in My computer on a portable device with the right mouse button>rename and name as you want.
Р—Р«3: If you put everything without wipes, then all your settings and data will be saved ... I set WITHOUT wipes ...
INSTRUCTIONS AS FIRMWARE AND 100% WORKING!
If something goes wrong with you, then you are doing something wrong! If something does not work for you after the firmware (for example, Wi-Fi), then you have done something wrong!
READ THE INSTRUCTIONS CAREFULLY AND FOLLOW EVERY POINT ATTENTIVELY! DO NOT HAVE TO DO ALL BY HABIT!

Post has been editedDesperanto86 - 20.11.13, 16:30

Р—Р«1: If you put everything without wipes, then all your settings and data will be saved ... I set WITHOUT wipes ...
Р—Р«2: thank Evgeny_rr 'y per link to ftf file
Р—Р«3: Now you have a full PCT runoff with a root ... although the phone on the computer is now defined as C69, but this is corrected by handles in build.prop: change the date ro.semc.product.name = after = write what you want ... if there is no such line, then add it, and then in My computer on a portable device with the right mouse button>rename and name as you want.
INSTRUCTIONS AS FIRMWARE AND 100% WORKING!
If something goes wrong with you, then you are doing something wrong! If something does not work for you after the firmware (for example, Wi-Fi), then you have done something wrong!
READ THE INSTRUCTIONS CAREFULLY AND FOLLOW EVERY POINT ATTENTIVELY! DO NOT HAVE TO DO ALL BY HABIT!

M. Added to the topic header

Post has been editedDesperanto86 - 20.11.13, 16:31

Current version: 1.0 > 1.1





INSTRUCTIONS AS FIRMWARE AND 100% WORKING!
If something goes wrong with you, then you are doing something wrong! If something does not work for you after the firmware (for example, Wi-Fi), then you have done something wrong!
READ THE INSTRUCTIONS CAREFULLY AND FOLLOW EVERY POINT ATTENTIVELY! DO NOT HAVE TO DO ALL BY HABIT!

Many thanks to the financially supported!

M. Added to the topic header

Post has been editedDesperanto86 - 03.04.14, 15:05

RomAur v3.0 [LB-UB] - JB 4.2.2 - 14.1.G.2.257 - FAST-STABLE - AROMA - ONLINE

Topic onXDA

Post has been editedNikCher - 20.10.13, 05:56

Р—Р«1: Now you have a full PCT runoff with a root ... although the phone on the computer is now defined as C69, but this is corrected by handles in build.prop: change the date ro.semc.product.name = after = write what you want ... if there is no such line, then add it, and then in My computer on a portable device with the right mouse button>rename and name as you want.
Р—Р«2: If you put everything without wipes, then all your settings and data will be saved ... I set WITHOUT wipes ...
Р—Р«3: from me there is embedded in the firmware:

• Adway - ad blocker
  
• Flash player - flash player
  
• RadioReconnect - a program for restarting the radio module without rebooting the phone
  
• Car - it is convenient to use in the car for quick access to some programs, navigation
  
• Flash - flashlight widget
  the rest is all stock
  

INSTRUCTIONS AS FIRMWARE AND 100% WORKING!
If something goes wrong with you, then you are doing something wrong! If something does not work for you after the firmware (for example, Wi-Fi), then you have done something wrong!
READ THE INSTRUCTIONS CAREFULLY AND FOLLOW EVERY POINT ATTENTIVELY! DO NOT HAVE TO DO ALL BY HABIT!

Post has been editedDesperanto86 - 22.12.13, 11:10

RomAur v3.1 [LB-UB] - JB 4.2.2 - c690x - 14.1.G.2.257 - FAST-STABLE - AROMA - ONLINE

Topic onXDA

And the firmware still did not turn out to be a complete chtoli stock? There are applications RadioReconnect, AdAway (what is this?), Car, Play Games, Flash ...

Post has been editedCR-V - 24.10.13, 09:09

Good day, dear forum users!

I have no idea how it would have been possible to do something that was started, so I ask for advice.

Essence: there is a Sony Xperia Z1, purchased from the operator T-mobile (Deutschland). In an incomprehensible way, I got ROOT - right, the bootloader is locked. Firmware updated to 14.1.G.2.257.
Frightened by the information that when receiving S-OFF or unlocking the bootloader, the camera falls off, did not even try to do it.

I would like to: to begin to change the screensaver (splashscreen, as I understood it - the animation quite suits me), well, add a little beauty.
I tried to do this through Recovery - it appears "successful", but the T-mobile logo is all the same as a fly on the white screen.

Question: Is it possible to somehow change splashscreen without falling off the camera or other troubles? Long flipped through the web, but never found the information or program.
Or just with getting S - OFF and other things?

I recognize my ignorance as one of the users.

I would be very grateful for the tips, not only in words. : thank_you:

CR-V,
this is a couple of bonuses from me ... from me there AdWay is an ad blocker, Flash player is a flash player, RadioReconnect is a program to restart the radio module without rebooting, CarMode is CAR mode, Flash is a flashlight widget ... the rest is all stock ... so if I built in there a root, then a sin not to stick a couple of useful applications

Post has been editedDesperanto86 - 24.10.13, 11:39

Desperanto86
understandably. And it seemed like the stock was written, but then something appeared, I thought a little. : smile:

SOF1966,
In my opinion, this is called booty. Getting rid of him is difficult, but ask here:Bootanimation

Post has been edited@ Victory @ - 24.10.13, 15:39

cry of the soul ... gentlemen moderators, please do not swear and do not delete ... they just kicked me up in koumiss ... the juziers themselves do not read the instructions, but they do everything out of habit and get jambs ...
MY INSTRUCTIONS HOW AND FIRMWARE 100% WORKING!
If something goes wrong with you, then you are doing something wrong! If something does not work for you after the firmware (for example, Wi-Fi), then you have done something wrong!
READ THE INSTRUCTIONS CAREFULLY AND FOLLOW EVERY POINT ATTENTIVELY! DO NOT HAVE TO DO ALL BY HABIT!

P.S. I am the same user as you. But I (tfu-tfu) everything works out. Do not do the most important thing about bluing (although even here everything went fine for me).:)

Post has been editedINSPEKT0R - 25.10.13, 07:32

I try to make a root according to the instructions, when I install the drivers, it writes "to restore driver installation, please disconnect the phone, disconnect the usb cable" and turn off the phone, and that's it ... the picture freezes
what's wrong?
wine 7

upd: figured it out. The program tried to rut the connected Samsung monitor hub)) turned it off, everything went ok.

Post has been editedranger_99 - 27.10.13, 22:11

I want to install this firmware according to the instructions - but the flash unit does not see the 254 firmware. How to return to the old one? I have firmware 257 without root and recovery (locked bootloader). Except for this firmware there are no options to get a root for 257?

musikman,
Shil the other day this firmware, no problem, like clockwork on all items of the instructions.
In your case, you can:
1) Update flashtool, do not change the path during installation.
2) Carefully read the instructions for working with flashtool`om (well, for example, the firmware should be on the path "C: \ Flashtool \ firmwares").
3) Download the firmware file.

ranger_99,
under the spoiler downloadSony Xperia Z1 - Custom firmware (OS 4.x.x) (Post # 25929782)