> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Samsung GT-I9300 Galaxy S III - Custom recovery



Rep: (3317)
Samsung GT - I9300 Galaxy S III - Custom recovery
Attached ImageSamsung Galaxy S III, SGS3, GT-I9300, m0
Description | Discussion | FAQ | Accessories | Marriage / Repair | Wi-Fi setup and problems | Power consumption (autonomy) | Editing system apk | Modified and stock kernels | Custom recovery | EFS Recovery (IMEI) | Firmware: Official | Custom | MIUI | OpenSource ( 4.x | 4.4 | 5.x | 6.x-7.x ) | Topics for CM12 / 13

FAQ on custom rekaveri

Recovery.img enters the structure android, has the same core (kernel), and that boot.img + additional modules to work in rekaveri mode (recovery / ramdisk / sbin), and graphics (recovery / ramdisk / res), collected from the entire firmware or a separate command for compiling recovery from various sources (mainly within the project CyanogenMod - CWM recovery, with the rest going to the addition and / or replacement parts source provided by the authors Custom recovery) under a specific phone model. CWM recovery developedKoushik dutta(Kushik Dutta, "Kush") in 2009. for CyanogenMod.

Of the main features custom rekaveri are the following functions:
  • Backing up the firmware image (the backup)
  • Restoring a backup firmware image (hereinafter referred to simply restore)
  • Possibility to install updates are not signed by the manufacturer (hereinafter update, update or update.zip)
  • View and create a log works rekaveri (show, create log)
  • Mounting system blocks (mount storage)
  • Mounting external sdcard (mount usb storage)
  • Optional cleaning (wipe / format) System
How to reboot your phone in recovery mode:
  • Clamp simultaneously shortcut [Vol +] [Cl Central.] [Power]
  • utilityreboot recovery
  • If the phone is in recovery mode by holding down the key combination is not translated, it is necessary to turn it off, hold down the key combination and let go after 3-4 seconds after the screen saver "Samsung Galaxy SIII"
  • Command as rootterminal: Reboot recovery
  • As root throughadb
Installing custom recovery:
  • Without a root installation is done by the firmware file (.tar, .tar.md5) program Odin Multi Loader, in the PDA field (see. Thread Official Firmware). Any custom rekaveri.
  • In the presence of root (cm. Thread Official Firmware) programMobile odin(Discussing application in the profile subject). Any custom rekaveri.
  • In the presence of root programAndroid Terminal Emulator. Unpack the archive with the custom rekaveri (eg byВ® Root Explorer (File Manager)), Transfer the image (img) in the root of the carrier run Android Terminal Emulator app and enter the following commands:
    su
    dd if = / media / recovery.img of = / dev / block / mmcblk0p6
    Where the carrier is either internal / sdcard, or external / storage / extSdCard, i.e. command should be:dd if = / sdcard / recovery.img ...ordd if = / storage / extSdCard / recovery.img
    This way you can install any custom or stock rekaveri.
  • In the presence of root programRom manager. Only CWM and CWM Touch (see. Description).
  • In the presence of root programGomanager. Only TWRP (cm. Description).
  • In the presence of root programRecovery Tools - Flasher(Any custom rekaveri).
The consequences of the installation of a custom rekaveri:
  • The presence of a custom rekaveri on Samsung devices by contactingASCautomatically void the limited warranty, but you no one bothers to make a backup of the system and flash the stock rekaveri (see. below).
  • Firmware rekaveri of a custom designed for your model, can not kill the machine.
  • Custom rekaveri during operation in the normal mode does not affect the duration of battery life.
Backing up the firmware image (the backup):
  • Feature called backup (to internal-internal or external-external memory).
    All custom rekaveri create a backup copy of the kernel image (boot.img), the system partition (/ system), the user partition (/ data), the temporary storage section (/ cache).
    TWRP and PhilZ create optional backup image of rekaveri (recovery.img, both), section / efs (efs.ext4.tar, efs.ext4.win, efs.img, in TWRP at the level of this section, in PhilZ created separately, see. the description), a modem (modem.bin, in PhilZ created separately see. the description)
Restoring a backup firmware image (hereinafter referred to simply restore):
  • All custom rekaveri restore their own backups. TWRP PhilZ and optionally reduced (see. The description)
Installation is not signed by the manufacturer for updates (the update, update, or update.zip):
  • Through custom rekaveri can sew kernel image rekaveri, efs, the firmware (not just the ones that are packed under the Odin Odin), modems, individual files packed in zip-archive for installation through rekaveri (see. The disclosure of fashion, firmware). Installation is made through a point install (install update.zip).
Optional cleaning (wipe / format) system):
  • Deleting files (data), the formatting of the selected partition. In different versions of custom rekaveri works differently (see. Description)
When update.zip firmware, backup, restore, backup and actions fall various bugs:
  • View a log of the work of a custom rekaveri possible through point show log. Log will be displayed directly in the recovery mode.
  • Create the log by using the tool create log (see. The description of a particular version). After the reboot, log will be available on one of the carriers.
  • View log after restarting the path /cache/recovery/last.log
How to restore the stock recovery:
  • Using the software, Mobile Odin (See above.) To select the firmware to select only part of the recovery firmware flash.
  • With the help of Android Terminal Emulator Program (See above.)
  • Replace stock rekaveri in the archive with the custom rekaveri and flash archive last.
On devices Samsung adb sideload feature does not work. It is designed for installation by the manufacturer signed (ota-update) updates. Some manufacturers of devices spread such updates on the official websites, where users can download and install them throughadb(Adroid debug bridge).
How to extract files from a backup:
  • Backups format .ext4.tar any archive computer or mobile device (e.g.,В® Root Explorer (File Manager)
  • The desired unit backup format in .ext4.win rename .tar and extract as described above
  • applicationВ® Nandroid ManagerYou can restore both applications and data. You can also restore sms, contacts and call log
Types of a custom rekaveri
CWM (Touch / Non-Touch)
Attached Image

CWM - Description
Control:

Only physical buttons + touch button "back"
+/- volume rocker - navigating the menus,
Power button, center - confirmation

Navigation:

reboot system now
  • Load the machine into operation (to the system)
install zip
Install update.zip:
  • choose zip from / sdcard - Select update.zip from internal sdcard
  • install zip from sideload - It does not work (for custom sm.FAQ rekaveri - adb sideload)
  • toggle signature verification - Enable / Disable the signature verification function ota-update manufacturer.
    When you install Custom recovery is disabled by default.
    Theoretically, if you disable signature verification and firmware Stock recovery, the signature should not be checked. It has not yet been tested.
  • choose zip from / storage / sdcard1 - Select update from external sdcard
wipe data / factory reset
  • Delete all user data
wipe cache partition
  • Perform partition cleaning / cache
backup and restore
Backup and restore menu:
  • backup to / sdcard - Make a backup to the internal sdcard
  • restore from / sdcard - Recover from backup from internal sdcard
  • delete from / sdcard - Delete backup from internal sdcard
  • advanced restore from / sdcard - Optional recovery of backup blocks from internal sdcard
  • backup to / storage / sdcard1 - Make a backup to an external sdcard
  • restore from / storage / sdcard1 - Recover from backup from external sdcard
  • delete from / storage / sdcard1 - Delete backup from external sdcard
  • advanced restore from / storage / sdcard1 - Optional recovery of backup blocks from external sdcard
  • free unused backup data - Check available backup space
  • choose default backup format - Select backup format. tar, dup, tar + gzip. Default tar
mounts and storage
Menu for mounting system blocks:
  • mount / efs - mount / efs
  • mount / system -Montirovanie / system
  • unmount / cache - Unmount / cache
  • mount / preload - Mounting / preload (not used here)
  • unmount / data - Unmounting / data
  • unmount / storage / sdcard1 - Unmounting external sdcard
  • format / system - Formatting the partition / system
  • format / cache - Format the partition / cache
  • format / preload - Formatting the section / preload (not used here)
  • fromat / data - Formatting the section / data
  • format / storage / sdcard1 - Format external sdcard
  • format / data and / data / media (/ sdcard) - Formatting the / data section and internal sdcard
  • mount USB storage - Mounting external sdcard as usb drive
advanced
Additional functions:
  • reboot recovery - Reboot to recovery. For example, after flashing another version of recovery
  • reboot to download - Reboot into firmware mode.
  • power off - Turn off the device
  • wipe dalvik cache - Delete the executable part of the application code from / data / dalvik-cache. For example, when flashing from coke to deodex or updating firmware without deleting application data.
  • report error - Report a bug to CWM developers. A log is created in the phone's memory, which can be sent via the Rom manager program (see the FAQ on Custom Recovery)
  • test key - Testing the response of physical buttons. Exit test mode - touch back button
  • show log - Display the log of the latest installation on the display
  • partition / storage / sdcard1 - Create sections on external memory. / sd-ext and swap
CWM Touch - Description
Control:

Sensory and Physical buttons

Navigation:

reboot system now
    Load the machine into operation (to the system)
install zip
Install the update:
  • choose zip from / sdcard - Select update from internal sdcard
  • install zip from sideload - It does not work (for custom sm.FAQ rekaveri - adb sideload)
  • apply /sdcard/update.zip - Sets the internal memory only update named update.zip (probably inherited from the OS Android 2.2)
  • toggle signature verification - Enable / Disable the signature verification function ota-update manufacturer
    When the default setting is off Custom recovery
    Theoretically, if you disable signature verification and firmware Stock recovery, the signature should not be checked. Not yet tested
  • choose zip from external sdcard - Select update from external sdcard
wipe data / factory reset
  • Delete all user data
wipe cache partition
  • Perform partition cleaning / cache
backup and restore
Backup and restore menu:
  • backup - Make a backup to the internal sdcard
  • restore - Recover from backup from internal sdcard
  • delete - Delete backup from internal sdcard
  • advanced restore - Optional recovery of backup blocks from internal sdcard
  • free unused backup data - Check available backup space
  • choose default backup format - Select the format of the backup. tar, dup. By default, tar
  • backup to external sdcard - Make a backup to an external sdcard
  • restore from external sdcard - Recover from backup from external sdcard
  • advanced restore from external sdcard - Optional recovery of backup blocks from external sdcard
  • delete from external sdcard - Delete backup from external sdcard
  • create image zip - Create a backup of the firmware to be installed through a recovery as the rom.zip. Not yet tested
mounts and storage
Menu for mounting system blocks:
  • mount / efs - mount / efs
  • unmount / cache - Unmount / cache
  • mount / system - Mount / system
  • unmount / data - Unmounting / data
  • mount / preload - Mounting / preload (not used here)
  • mount / external_sd - Mounting external sdcard as usb drive
  • format / cache - Format the partition / cache
  • format / system - Formatting the partition / system
  • fromat / data - Formatting the section / data
  • format / preload - Formatting the section / preload (not used here)
  • format / sdcard - Format internal sdcard
  • format / external_sd - Format external sdcard
  • format / data and / data / media (/ sdcard) - Formatting the / data section and internal sdcard
advanced
Additional functions:
  • reboot recovery - Reboot to recovery. For example, after flashing another version of recovery.
  • reboot to bootloader - Reboot into firmware mode.
  • power off - Turn off the device
  • wipe dalvik cache - Delete the executable part of the application code from / data / dalvik-cache. For example, when flashing from coke to deodex or updating firmware without deleting application data.
  • report error - Report a bug to CWM developers. A log is created in the phone's memory, which can be sent via the Rom manager program (see the FAQ on Custom Recovery)
  • test key - Testing the response of physical buttons. Exit test mode - touch back button
  • show log - Display the log of the latest installation on the display.


Homepage
Download Page onsavagemessiahzine.com
Discussion page on xda-developers.com
PhilZ Touch

Attached Image


PhilZ Touch - Description
Control:

Sensory

Navigation:
Starting with version 5.18.H:
  • It referred to as outer sdcard / storage / sdcard1
  • no point format the internal sdcard
Reboot System Now
    Load the machine into operation (to the system)
Install Zip
Install the update:
  • Choose zip from / sdcard - Select update from internal sdcard
  • Choose zip from external sdcard - Select update from external sdcard
  • Multi-zip installer -
  • Install zip from sideload - It does not work (for custom sm.FAQ rekaveri - adb sideload)
  • Toggle Signature Verification - Enable / Disable the signature verification function ota-update manufacturer.
    When you install Custom recovery is disabled by default.
    Theoretically, if you disable signature verification and firmware Stock recovery, the signature should not be checked. It has not yet been tested.
  • Setup Free Browser Mode - Folder Selection menu or memory for the default installation update.zip.
Wipe Data / Factory Reset
Delete all user data:
  • Wipe Data / Factory Reset - Delete all user data except / data / media (internal sdcard).
  • Clean to Install a New ROM - Run the script to completely clear the phone memory for a "clean" installation of the new firmware.
Wipe Cache Partition
  • Perform partition cleaning / cache
Backup and Restore
Backup and restore menu:
  • backup - Make a backup to the internal sdcard
  • Restore - Recover from backup from internal sdcard
  • Delete - Delete backup from internal sdcard

  • Custom Backup and Restore
    Optional backup and restore:
    Custom backup job - Select an option all available blocks of memory for backup. Section / efs is reserved separately from all
    Custom Restore Job - Select an option all available blocks of memory to restore from backup. Section / efs restored separately from all
    TWRP Backup and Restore
    Backup in TWRP Format - Make a backup in TWRP format
    Restore from TWRP Format - Restore backup in TWRP format
    Delete TWRP Backup Image - Delete backup in TWRP format
    Clone ROM to update - Create update.zip to install through the custom recovery:
    Create from Curent ROM - Create from current firmware
    Create from Previus Backup - Create from previous backup
    Settings - Settings (go to Misc Nandroid Settings )
    Free Unused Backup Data - Check available backup space
  • Misc Nandroid Settings
    Additional settings Nandroid backup:
    MD5 checksum - Check md5 amounts (by default - yes)
    Include / preload - Include partition / preload in backup (we do not use it)
    Compression - Compression backup (by default - no)
    ORS Backup Target - Choosing a backup storage location (default is external sdcard)
    ORS Backup Format - Select backup format (default CWM, TWRP possible)
    Show Nandroid Size Progress - Show backup sizes (by default - yes)
    Hide Nandroid Progress - Hide backup progress
    Default Backup Format ... - Default backup format (tar, dup, tar + gzip. Default tar)
    Regenerate md5 sum - Regeneration md5 sum (to regenerate)
    Backup to External sdcard - Make a backup to an external sdcard
    Restore from External sdcard - Recover from backup from external sdcard
    Delete from External sdcard - Delete backup from external sdcard
Mounts and Storage
Menu for mounting system blocks:
  • mount / efs - mount / efs
  • unmount / cache - Unmount / cache
  • mount / system - Mount / system
  • unmount / data - Unmounting / data
  • mount / preload - Mounting / preload (not used here)
  • unmount / external_sd - Unmounting external sdcard
  • mount / sd-ext - Mounting dop.razdela / sd-ext
  • format / cache - Format the partition / cache
  • format / system - Formatting the partition / system
  • format / data - Formatting the section / data
  • format / preload - Formatting the section / preload (not used here)
  • format / sdcard - Format internal sdcard
  • format / external_sd - Format external sdcard
  • format / sd-ext - Formatting dop.razdela / sd-ext
  • format / data and / data / media (/ sdcard) - Formatting the / data section and internal sdcard
  • mount USB storage - Mounting external sdcard as usb drive
Advanced
Additional functions:
  • wipe dalvik cache - Delete the executable part of the application code from / data / dalvik-cache. For example, when flashing from coke to deodex or updating firmware without deleting application data.
  • report error - Report an error to the developer. A log will be created, which should be sent to Phil3759 @ xda
  • test key - Testing the response of physical and on-screen buttons. Exit test mode - enter button or touch back button
  • show log - Display the log of the latest installation on the display.
  • Storage Set to / data / media / 0 - if you know the destination, please comment in QMS
  • Partition internal sdcard - Create additional partitions on the internal sdcard
  • Partition extternal sdcard - Create additional partitions on the external sdcard
PhilZ Settings
PhilZ Advanced Settings:
  • Open Recovery Script - If you know the exact appointment, please comment in QMS.
  • Custom Backup and Restore - see above (p. Restore)
  • Aroma File Manager - Run Aroma File Manager
    If the folderclockworkmodcreate a folderaromafmand to put Aroma File Manager, renaming itaromafm.zip, It can be run through the menu or using gestures (see. Below) Ie the path would be:clockworkmod / aromafm / aromafm.zip
  • GUI Preferences - Appearance settings PhilZ recovery
    Touch GUI - Sensor (full touch control | double tap | disable sensor | Sensor only for menu navigation)
    Menu Height - The height of the menu items (by default 24 and the higher the number, the smaller the number of menu items on the screen)
    Scroll Sensitivity - X (default 48)
    Touch accuracy - Sensitivity of the Tach (default 3)
    Use Bottom Row - Enable / Disable the deviation from the bottom edge of the display
    Vibrator - Tactile response (enabled by default)
    Key repeat - X (enabled by default)
    Menu Separator - X (enabled by default)
    Easy log view - X (enabled by default)
    Pause on log - X (enabled by default)
    Set log row - Number of progressions displayed in the created log (default 3)
    Set brightness - Brightness (default 160)
    Dim screen delay - Dims the display (by default after 1 minute)
    Screen off delay - turn off the display (default 3 minutes)
    Battery / Clock - Hide / Show charge level and time
    Time zone - Setting the time zone displayed in the recovery mode
    Change Background - Change background
    Change Menu Colors - Change the color of the menu
    Toggle Virtual Keys - Hide / Show virtual buttons
    Gesture action setup - customize gestures
    Auto Restore Settings - Auto-restore settings (apparently upon reboot)
    Save and Restore Settings - Save / Restore PhilZ custom settings
    Reset All Recovery Settings - Reset all user Philz recovery settings
    About - View information about recovery
Power options
Reboot:
  • Recovery - Reboot to recovery. For example, after flashing another version of recovery.
  • Reboot to Download Mode - Reboot into firmware mode.
  • Power off - Turn off the device

Discussion page on xda-developers.com
Download Page rekaveri from JustArchi
Download Page rekaveri from temasek
Download Page rekaveri from arter97
TWRP
Attached Image

TWRP - Description
Control:

Sensory

Navigation:

In versions of TWRP 3.0.0-0 and above the present Russian language

Install

Install update:
  • Use external SD - Install update from external sdcard
  • Use internal storage - Installation update c internal sdcard
Wipe
Deletion of data:
  • Cache - partition formatting / cache
  • Dalvik cache - Delete the executable part of the application code from / data / dalvik-cache
  • Factory Reset - Delete all user data from / data and / cache
  • System - Formatting the partition / system
  • External storage - Format external sdcard
  • Internal Storage - Format internal sdcard
  • Format Data - Formatting the section / data
Backup
Create a backup of the entire system:
  • Backup Name (Current Date) - Select backup name (default date / build number / firmware version)

  • Select Partitions to BackUp - Select backup blocks:
    System
    Data
    Boot
    Recovery
    Cache
    efs


  • No encription - Do not encrypt the backup (you can set a backup password)

  • Refresh Sizes - Update data (check the amount of space occupied by backup after selecting blocks)

  • Storage - Selection of backup media:
    Use external SD - Use external sdcard
    Use internal storage - Use internal sdcard

  • Enable Compression - Compression backup - (backup is created about twice as long)

  • Skip MD5 generation during backup - Skip generation of md5 backup amount
Restore
Recovery:
  • Storage - Select backup media:
    Use external SD - Use external sdcard
    Use internal storage - Use internal sdcard

  • Restoring ... - Select backup blocks for recovery:
    System
    Data
    Boot
    Recovery
    Cache
    efs


  • Rename Backup - Rename backup

  • Delete Backup - Delete backup

  • MD5 verification of bacup files - Disable md5 checks
Mount
Menu for mounting system blocks:
  • Use external SD - Use external sdcard
  • Use internal storage - Use internal sdcard
  • / System -Montirovanie / Dismounting / system
  • / Data - Mounting / Unmounting / data
  • / Cache - Mounting / Unmounting / cache
  • Sd card - Mounting / Unmounting external sdcard
Settings
Settings:
  • Zip file signature verification - Signature verification
  • Force MD5 check on all zips - Forced verify MD5 sums update.zip
  • Use rm -rf instead of formating - apply recursive formatting
  • Skip MD5 generation of backup - Forced disconnection of the generation of MD5 sums during backup
  • Enable MD5 verification of backup files - Forced verify MD5 sums backup
  • Ignore image size errors during backup - Disable future backup volume counting
  • Simulation actions for theme testing - Testing custom themes TWRP
  • Time zone - Set the time zone displayed in the recovery mode
  • Screen - Screen Settings
  • Enable / Disable timeout - Enable / Disable screen timeout
  • Screen timeout in seconds - Adjust screen timeout duration
  • Restore Defaults - Reset all custom TWRP settings to default
Advanced
Additional functions:
  • Copy Log to SD - Create installation log
  • Fix permition - Run the script for auto-distribution of rights to folders and files
  • File manager - Use the memory guide (you can copy, move, delete, rename, manually assign rights, assign rights to 755 folders)
  • Terminal command - Use console
  • Reload Theme - Restart the topic
  • Adb sideload - It does not work (for custom sm.FAQ rekaveri - adb sideload)

Reboot
Reboot:
  • System - Download the device in the operating mode (in the system)
  • Power off - Turn off the device
  • Recovery - Reboot to recovery. For example, after flashing another version of recovery
Addition:
If along the way/ Sdcard / TWRP /create a structure/sdcard/TWRP/aromafm/aromafm.zipAnd in the settings of the selected rekaveriAroma FMas a file manager, you can run the script through a point AromyFile manager Attached filearomafm.zip(1.32 MB)

If you can not see the structure aromafm/ system, Then pressmenu, Choose from the context menusettingsIn settings select automount blocks -automatically mount ...Restart aromafm.

If along the way/ Sdcard / TWRP /create a structure/sdcard/TWRP/flashify/flashify.zipIt is possible to stitch imagesboot.imgandrecovery.img. To do this, proceed to the correct directory and selectinstall image Attached fileflashify.zip(1.88 KB)

If along the way/ Sdcard / TWRP /create a structure/sdcard/TWRP/theme/ui.zipIt is possible to automatically start the threads without using TWRP Theme Manager. To do this, the selected theme ***. Zip renamedui.zip. Topics takehere

If you need a quick remove settings in TWRP, then delete the file/sdcard/TWRP/.twrps.

To start aromafm.zip other rekaveri you need raspkovat of an attached file. Archival structure/aromafm/aromafm.zipand in this form it will not start.

Homepage
Download Page
Discussion page on xda-developers.com
informal discussion page (test) builds TWRP Homebuild
Carbon open Touch Recovery
Latest Versions
Instructions Utility
Polls
Attached Image

Attached Image


Post has been editedsnekt - 21.10.18, 11:30
Reason for editing: TWRP 3.2.3-0



Rep: (3317)
CFRoot + Custom Recovery



Before flashing unzip the zip file
Sew as usual - one as part of the PDA

Update SuperSU no opportunity and time. updated inGPlayorhere

CF-Root + Custom Recovery I will no longer be updated.



Post has been editedshoma_81 - 12.06.14, 18:19
Reason for editing: SuperSU 1.91



Rep: (3317)
Create your own themes TWRP (English) - http://www.teamw.in/twrp2-theme-guide

Translation of manual for the creation of the HC.Targit - Attached fileTheme + Guide + TWRP2.zip (172.29 KB)

This manual is a translation from of.istochnika, please do not disturb the transfer of the author on the establishment of the.

Examples for the TWRP on Nexus 4 - TWRP Theme Collection Thread

Post has been editedshoma_81 - 07.02.14, 18:59
Reason for editing: added a link to TWRP theme



Rep: (3317)
Assembling the CWM-Recovery (CWM-Touch-Recovery) on the basis of the image from any firmware recovery.img

In this topic we will not delve into the intricacies of the system settings under development.
To do this, there are themes and even a subforum in our forum, and goooogle has not been canceled.

Instruments:
BOOT & RECOVERY REPACKERunder Ubuntu
blackhawk toolsunder Ubuntu
Boot & Recovery Repackunder Windows

Repackaging of the image:
1. Extract image rekaveri (who does what) from the CWM (CWM-Touch) our system, remove somewhere or rename a folder with the ramdisk (preferably clean);
2. Extract Stock rekaveri;
3. Transfer the entire contents ramdisk / sbin folder of CWM in Stoke rekaveri, agree on a replacement;
4. Remove the keys from the file ramdisk / res folder of CWM and transfer the entire contents of Stoke rekaveri, agree on a replacement;
5. Packing into the image, sew, rejoice.

UPD: If you change the graphic part, should abide by name, formats and image sizes.

With TWRP this trick will not work. It is going from their sources within the project SEE -http://rootzwiki.com/topic/23903-how-to-co...rp-from-source/
Before fils has not reached the hands of ...

Post has been editedshoma_81 - 10.10.13, 17:53



Rep: (3317)
CWM - Description
Control:

Only physical buttons + touch button "back"
+/- volume rocker - navigating the menus,
Power button, center - confirmation


Navigation:

reboot system now
  • Load the machine into operation (to the system)

install zip
Install update.zip:
  • choose zip from / sdcard - Select update.zip from internal sdcard
  • install zip from sideload - It does not work (for custom sm.FAQ rekaveri - adb sideload)
  • toggle signature verification - Enable / Disable the signature verification function ota-update manufacturer.
    When you install Custom recovery is disabled by default.
    Theoretically, if you disable signature verification and firmware Stock recovery, the signature should not be checked. It has not yet been tested.
  • choose zip from / storage / sdcard1 - Select update from external sdcard

wipe data / factory reset
  • Delete all user data

wipe cache partition
  • Perform partition cleaning / cache

backup and restore
Backup and restore menu:
  • backup to / sdcard - Make a backup to the internal sdcard
  • restore from / sdcard - Recover from backup from internal sdcard
  • delete from / sdcard - Delete backup from internal sdcard
  • advanced restore from / sdcard - Optional recovery of backup blocks from internal sdcard
  • backup to / storage / sdcard1 - Make a backup to an external sdcard
  • restore from / storage / sdcard1 - Recover from backup from external sdcard
  • delete from / storage / sdcard1 - Delete backup from external sdcard
  • advanced restore from / storage / sdcard1 - Optional recovery of backup blocks from external sdcard
  • free unused backup data - Check available backup space
  • choose default backup format - Select backup format. tar, dup, tar + gzip. Default tar

mounts and storage
Menu for mounting system blocks:
  • mount / efs - mount / efs
  • mount / system -Montirovanie / system
  • unmount / cache - Unmount / cache
  • mount / preload - Mounting / preload (not used here)
  • unmount / data - Unmounting / data
  • unmount / storage / sdcard1 - Unmounting external sdcard
  • format / system - Formatting the partition / system
  • format / cache - Format the partition / cache
  • format / preload - Formatting the section / preload (not used here)
  • fromat / data - Formatting the section / data
  • format / storage / sdcard1 - Format external sdcard
  • format / data and / data / media (/ sdcard) - Formatting the / data section and internal sdcard
  • mount USB storage - Mounting external sdcard as usb drive

advanced
Additional functions:
  • reboot recovery - Reboot to recovery. For example, after flashing another version of recovery
  • reboot to download - Reboot into firmware mode.
  • power off - Turn off the device
  • wipe dalvik cache - Delete the executable part of the application code from / data / dalvik-cache
    For example, if during piercing with The Code on deodeks or upgrade firmware without removing these applications.
  • report error - Report a bug to CWM developers. A log is created in the phone's memory, which can be sent via the Rom manager program (see the FAQ on Custom Recovery)
  • test key - Testing the response of physical buttons. Exit test mode - touch back button
  • show log - Display the log of the latest installation on the display
  • partition / storage / sdcard1 - Create sections on external memory. / sd-ext and swap

CWM Touch - Description
Control:
Sensory and Physical buttons


Navigation:

reboot system now
    Load the machine into operation (to the system)

install zip
Install the update:
  • choose zip from / sdcard - Select update from internal sdcard
  • install zip from sideload - It does not work (for custom sm.FAQ rekaveri - adb sideload)
  • apply /sdcard/update.zip - Sets the internal memory only update named update.zip (probably inherited from the OS Android 2.2)
  • toggle signature verification - Enable / Disable the signature verification function ota-update manufacturer
    When the default setting is off Custom recovery
    Theoretically, if you disable signature verification and firmware Stock recovery, the signature should not be checked. Not yet tested
  • choose zip from external sdcard - Select update from external sdcard

wipe data / factory reset
  • Delete all user data

wipe cache partition
  • Perform partition cleaning / cache

backup and restore
Backup and restore menu:
  • backup - Make a backup to the internal sdcard
  • restore - Recover from backup from internal sdcard
  • delete - Delete backup from internal sdcard
  • advanced restore - Optional recovery of backup blocks from internal sdcard
  • free unused backup data - Check available backup space
  • choose default backup format - Select the format of the backup. tar, dup. By default, tar
  • backup to external sdcard - Make a backup to an external sdcard
  • restore from external sdcard - Recover from backup from external sdcard
  • advanced restore from external sdcard - Optional recovery of backup blocks from external sdcard
  • delete from external sdcard - Delete backup from external sdcard
  • create image zip - Create a backup of the firmware to be installed through a recovery as the rom.zip. Not yet tested

mounts and storage
Menu for mounting system blocks:
  • mount / efs - mount / efs
  • unmount / cache - Unmount / cache
  • mount / system - Mount / system
  • unmount / data - Unmounting / data
  • mount / preload - Mounting / preload (not used here)
  • mount / external_sd - Mounting external sdcard as usb drive
  • format / cache - Format the partition / cache
  • format / system - Formatting the partition / system
  • fromat / data - Formatting the section / data
  • format / preload - Formatting the section / preload (not used here)
  • format / sdcard - Format internal sdcard
  • format / external_sd - Format external sdcard
  • format / data and / data / media (/ sdcard) - Formatting the / data section and internal sdcard

advanced
Additional functions:
  • reboot recovery - Reboot to recovery. For example, after flashing another version of recovery.
  • reboot to bootloader - Reboot into firmware mode.
  • power off - Turn off the device
  • wipe dalvik cache - Delete the executable part of the application code from / data / dalvik-cache
    For example, if during piercing with The Code on deodeks or upgrade firmware without removing these applications.
  • report error - Report a bug to CWM developers. A log is created in the phone's memory, which can be sent via the Rom manager program (see the FAQ on Custom Recovery)
  • test key - Testing the response of physical buttons. Exit test mode - touch back button
  • show log - Display the log of the latest installation on the display.
PhilZ Touch - Description
Control:
Sensory


Navigation:

Starting with version 5.18.H:
  • It referred to as outer sdcard / storage / sdcard1
  • no point format the internal sdcard


Reboot System Now
    Load the machine into operation (to the system)

Install Zip
Install the update:
  • Choose zip from / sdcard - Select update from internal sdcard
  • Choose zip from external sdcard - Select update from external sdcard
  • Multi-zip installer -
  • Install zip from sideload - It does not work (for custom sm.FAQ rekaveri - adb sideload)
  • Toggle Signature Verification - Enable / Disable the signature verification function ota-update manufacturer.
    When you install Custom recovery is disabled by default.
    Theoretically, if you disable signature verification and firmware Stock recovery, the signature should not be checked. It has not yet been tested.
  • Setup Free Browser Mode - Menu for selecting a folder or memory for installing update.zip by default. If you know the exact appointment, please comment in QMS.

Wipe Data / Factory Reset
Delete all user data:
  • Wipe Data / Factory Reset - Delete all user data except / data / media (internal sdcard).
  • Clean to Install a New ROM - Run the script to completely clear the phone memory for a "clean" installation of the new firmware.

Wipe Cache Partition
    Perform partition cleaning / cache

Backup and Restore
Backup and restore menu:
  • backup - Make a backup to the internal sdcard
  • Restore - Recover from backup from internal sdcard
  • Delete - Delete backup from internal sdcard

  • Custom Backup and Restore
    Optional backup and restore:
    Custom backup job
    Select an option all available blocks of memory for backup
    Section / efs is reserved separately from all
    Custom Restore Job
    Select an option all available blocks of memory to restore from backup
    Section / efs restored separately from all
    TWRP Backup and Restore
    Backup in TWRP Format - Make a backup in TWRP format
    Restore from TWRP Format - Restore backup in TWRP format
    Delete TWRP Backup Image - Delete backup in TWRP format
    Clone ROM to update
    Create update.zip for installation via custom recovery:
    Create from Curent ROM - Create from current firmware
    Create from Previus Backup - Create from previous backup
    Settings - Settings (go to Misc Nandroid Settings )
  • Free Unused Backup Data - Check available backup space
  • Misc Nandroid Settings
    Additional settings Nandroid backup:
    MD5 checksum - Check md5 amounts (by default - yes)
    Include / preload - Include partition / preload in backup (we do not use it)
    Compression - Compression backup (by default - no)
    ORS Backup Target - Choosing a backup storage location (default is external sdcard)
    ORS Backup Format - Select backup format (default CWM, TWRP possible)
    Show Nandroid Size Progress - Show backup sizes (by default - yes)
    Hide Nandroid Progress - Hide backup progress
    Default Backup Format ... - Default backup format (tar, dup, tar + gzip. Default tar)
    Regenerate md5 sum - Regeneration md5 sum (to regenerate)
  • Backup to External sdcard - Make a backup to an external sdcard
  • Restore from External sdcard - Recover from backup from external sdcard
  • Delete from External sdcard - Delete backup from external sdcard

Mounts and Storage
Menu for mounting system blocks:
  • mount / efs - mount / efs
  • unmount / cache - Unmount / cache
  • mount / system - Mount / system
  • unmount / data - Unmounting / data
  • mount / preload - Mounting / preload (not used here)
  • unmount / external_sd - Unmounting external sdcard
  • mount / sd-ext - Mounting dop.razdela / sd-ext
  • format / cache - Format the partition / cache
  • format / system - Formatting the partition / system
  • format / data - Formatting the section / data
  • format / preload - Formatting the section / preload (not used here)
  • format / sdcard - Format internal sdcard
  • format / external_sd - Format external sdcard
  • format / sd-ext - Formatting dop.razdela / sd-ext
  • format / data and / data / media (/ sdcard) - Formatting the / data section and internal sdcard
  • mount USB storage - Mounting external sdcard as usb drive

Advanced
Additional functions:
  • wipe dalvik cache - Delete the executable part of the application code from / data / dalvik-cache
    For example, if during piercing with The Code on deodeks or upgrade firmware without deleting application data
  • report error - Report an error to the developer. A log will be created, which should be sent to Phil3759 @ xda
  • test key - Testing the response of physical and on-screen buttons. Exit test mode - enter button or touch back button
  • show log - Display the log of the latest installation on the display.
  • Storage Set to / data / media / 0 - if you know the destination, please comment in QMS
  • Partition internal sdcard - Create additional partitions on the internal sdcard
  • Partition extternal sdcard - Create additional partitions on the external sdcard

PhilZ Settings
PhilZ Advanced Settings:
  • Open Recovery Script - If you know the exact appointment, please comment in QMS.
  • Custom Backup and Restore - see above (p. Restore)
  • Aroma File Manager - Run Aroma File Manager
    (If the folder clockworkmod create a folder and put there aromafm Aroma File Manager, renaming it aromafm.zip, it can be run through the menu or using gestures (see. Below)
    those. path must be so: clockworkmod / aromafm / aromafm.zip)
  • GUI Preferences - Appearance settings PhilZ recovery
    Touch GUI - Sensor (full touch control | double tap | disable sensor | Sensor only for menu navigation)
    Menu Height - The height of the menu items (by default 24 and the higher the number, the smaller the number of menu items on the screen)
    Scroll Sensitivity - X (default 48)
    Touch accuracy - Sensitivity of the Tach (default 3)
    Use Bottom Row - Enable / Disable the deviation from the bottom edge of the display
    Vibrator - Tactile response (enabled by default)
    Key repeat - X (enabled by default)
    Menu Separator - X (enabled by default)
    Easy log view - X (enabled by default)
    Pause on log - X (enabled by default)
    Set log row - Number of progressions displayed in the created log (default 3)
    Set brightness - Brightness (default 160)
    Dim screen delay - Dims the display (by default after 1 minute)
    Screen off delay - turn off the display (default 3 minutes)
    Battery / Clock - Hide / Show charge level and time
    Time zone - Setting the time zone displayed in the recovery mode
    Change Background - Change background
    Change Menu Colors - Change the color of the menu
    Toggle Virtual Keys - Hide / Show virtual buttons
    Gesture action setup - customize gestures
    Auto Restore Settings - Auto-restore settings (apparently upon reboot)
  • Save and Restore Settings - Save / Restore PhilZ custom settings
  • Reset All Recovery Settings - Reset all user Philz recovery settings
  • About - View information about recovery

Power options
Reboot:
  • Recovery - Reboot to recovery. For example, after flashing another version of recovery.
  • Reboot to Download Mode - Reboot into firmware mode.
  • Power off - Turn off the device

TWRP - Description
Control:
Sensory


Navigation:

Install

Install update:
  • Use external SD - Install update from external sdcard
  • Use internal storage - Installation update c internal sdcard

Wipe
Deletion of data:
  • Cache - partition formatting / cache
  • Dalvik cache - Delete the executable part of the application code from / data / dalvik-cache
  • Factory Reset - Delete all user data from / data and / cache
  • System - Formatting the partition / system
  • External storage - Format external sdcard
  • Internal Storage - Format internal sdcard
  • Format Data - Formatting the section / data

Backup
Create a backup of the entire system:
    Backup Name (Current Date) - Select backup name (default date / build number / firmware version)

    Select Partitions to Back Up - Select backup blocks:
  • System
  • Data
  • Boot
  • Recovery
  • Cache
  • efs

    No encription - Do not encrypt the backup (you can set a backup password)

    Refresh Sizes - Update data (check the amount of space occupied by backup after selecting blocks)

    Storage - Selection of backup media:
  • Use external SD - Use external sdcard
  • Use internal storage - Use internal sdcard

    Enable Compression - Compression backup - (backup is created about twice as long)

    Skip MD5 generation during backup - Skip the generation of md5 sums backup [/ b]

Restore
Recovery:
    Storage - Select backup media:
  • Use external SD - Use external sdcard
  • Use internal storage - Use internal sdcard

    Restoring ... - Select backup blocks for recovery:
  • System
  • Data
  • Boot
  • Recovery
  • Cache
  • efs

    Rename Backup - Rename backup

    Delete Backup - Delete backup

    MD5 verification of bacup files - Disable md5 checks

Mount
Menu for mounting system blocks:
  • Use external SD - Use external sdcard
  • Use internal storage - Use internal sdcard
  • / System -Montirovanie / Dismounting / system
  • / Data - Mounting / Unmounting / data
  • / Cache - Mounting / Unmounting / cache
  • Sd card - Mounting / Unmounting external sdcard

Settings
Settings:
  • Zip file signature verification - Signature verification
  • Force MD5 check on all zips - Forced verify MD5 sums update.zip
  • Use rm -rf instead of formating - apply recursive formatting
  • Skip MD5 generation of backup - Forced disconnection of the generation of MD5 sums during backup
  • Enable MD5 verification of backup files - Forced verify MD5 sums backup
  • Ignore image size errors during backup - Disable future backup volume counting
  • Simulation actions for theme testing - Testing custom themes TWRP

    Time zone - Set the time zone displayed in the recovery mode
    Screen - Screen Settings
  • Enable / Disable timeout - Enable / Disable screen timeout
  • Screen timeout in seconds - Adjust screen timeout duration
    Restore Defaults - Reset all custom TWRP settings to default

Advanced
Additional functions:
  • Copy Log to SD - Create installation log
  • Fix permition - Run the script for auto-distribution of rights to folders and files
  • File manager - Use the memory guide (you can copy, move, delete, rename, manually assign rights, assign rights to 755 folders)
  • Terminal command - Use console
  • Reload Theme - Restart the topic
  • Adb sideload - It does not work (for custom sm.FAQ rekaveri - adb sideload)

Reboot
Reboot:
  • System - Download the device in the operating mode (in the system)
  • Power off - Turn off the device
  • Recovery - Reboot to recovery. For example, after flashing another version of recovery


Addition:
If the path / sdcard / TWRP /
create a structure/sdcard/TWRP/aromafm/aromafm.zipAnd in the settings of the selected rekaveri Aroma FM as file manager, you can run the script by Aroma File Manager itemAttached filearomafm.zip(1.32 MB)

If aromafm not see the structure / system, then press the menu, the shortcut menu, choose the settings, in the settings select automount blocks - automatically mount ...
Restart aromafm.

If the path / sdcard / TWRP /
create a structure/sdcard/TWRP/flashify/flashify.zipIt is possible to flash the boot.img image and recovery.img. To do this, proceed to the correct directory and select the install imageAttached fileflashify.zip(1.88 KB)

If the path / sdcard / TWRP /
create a structure/sdcard/TWRP/theme/ui.zipIt is possible to automatically start the threads without using TWRP Theme Manager. To do this, the selected theme ***. Zip renamed ui.zip. Topics takehere

If you need a quick remove settings in TWRP, then delete the file/sdcard/TWRP/.twrps.

To start aromafm.zip other rekaveri you need raspkovat of an attached file. Archival /aromafm/aromafm.zip structure and as such it will not start.


Post has been editedshoma_81 - 28.06.16, 18:02



Rep: (111)
When I go into the mode rekaveri top I wrote the following: CWM based Recovery v5.5.0.4 :: CF - v1.5
Tell me that I should change or improve, to CWM way I push, do not touch the CF ... I do not know what ... do not throw the rag.



Rep: (3317)
Dimems,
And what exactly are you confused?
Something that does not touch rekaveri or what?
CWM based - based on CWM
CF - Root of ChainFire



Rep: (111)
Backup hats
Samsung GT - I9300 Galaxy S III - Custom recovery

[Attachment = "3546931 281-firmware.png"]Samsung GT-I9300 Galaxy S III

Description | FAQ | Discussion пїЅ | Marriage / Repair пїЅ | Official firmware пїЅ | Custom firmware пїЅ | Modified and stock kernels пїЅ | Custom recoveryпїЅ




Attention!
  • Subject created to discuss functionality and methods rekaveri firmware, identify the causes of errors in the work with the firmware itself rekaveri, firmware updates via rekaveri.
  • Posted in this topic rekaveri custom designed just for Samsung Galaxy S3 GT - I9300 (International)
    If the firmware on other models of Samsung Galaxy S3, as well as with firmware Samsung Galaxy S3 GT - I9300 (International) by custom rekaveri not designed for this model, you get partially or completely non-working unit (deceased touchscreen).
    If this has happened, contact yourASC. Cost and you know the list of works on the site.
  • When creating new messages follow the topic guidePosting forum posts.
  • In assessing the opponent posts are guided themeUser Moderation - implementation
  • When contacting the topic spread rekaveri log (see. FAQ FAQ on custom rekaveri).
  • Write original title of a custom rekaveri. This will facilitate the search for information by keywords.


Mini-FAQ on custom rekaveri
recovery.img enters the structure android, has the same core (kernel), and that boot.img + additional modules to work in rekaveri mode (recovery / ramdisk / sbin), and graphics (recovery / ramdisk / res), collected from the entire firmware or a separate command for compiling recovery from various sources (mainly within the project CyanogenMod - CWM recovery, with the rest going to the addition and / or replacement parts source provided by the authors Custom recovery) under a specific phone model. CWM recovery developedKoushik dutta(Kushik Dutta, "Kush") in 2009. for CyanogenMod.


Of the main features custom rekaveri are the following functions:
  • Backing up the firmware image (the backup)
  • Restoring a backup firmware image (hereinafter referred to simply restore)
  • Possibility to install updates are not signed by the manufacturer (hereinafter update, update or update.zip)
  • View and create a log works rekaveri (show, create log)
  • Mounting system blocks (mount storage)
  • Mounting external sdcard (mount usb storage)
  • Optional cleaning (wipe / format) System

How to reboot your phone in recovery mode:
  • Clamp simultaneously shortcut [Vol +] [Cl Central.] [Power]
  • utilityreboot recovery
  • If the phone is in recovery mode by holding down the key combination is not translated, it is necessary to turn it off, hold down the key combination and let go after 3-4 seconds after the screen saver "Samsung Galaxy SIII"
  • Command as rootterminal: Reboot recovery
  • As root throughadb

Installing custom recovery:
  • Without a root installation is done by the firmware file (.tar, .tar.md5) program Odin Multi Loader, in the PDA field (see. Thread Official Firmware). Any custom rekaveri.
  • In the presence of root (cm. Thread Official Firmware) programMobile odin(Discussing application in the profile subject). Any custom rekaveri.
  • In the presence of root programAndroid Terminal Emulator. Unpack the archive with the custom rekaveri (eg byВ® Root Explorer (File Manager)), Transfer the image (img) in the root of the carrier run Android Terminal Emulator app and enter the following commands:
    su
    dd if = / media / recovery.img of = / dev / block / mmcblk0p6
    wherein the carrier is either internal / sdcard, or external / storage / extSdCard, i.e. command must be: dd if = / sdcard / recovery.img ... or dd if = / storage / extSdCard / recovery.img
    This way you can install any custom or stock rekaveri.
  • In the presence of root programRom manager. Only CWM and CWM Touch (see. Description).
  • In the presence of root programGomanager. Only TWRP (cm. Description).
  • In the presence of root programRecovery Tools - Flasher(Any custom rekaveri).

The consequences of the installation of a custom rekaveri:
  • The presence of a custom rekaveri on Samsung devices by contactingASCautomatically void the limited warranty, but you no one bothers to make a backup of the system and flash the stock rekaveri (see. below).
  • Firmware rekaveri of a custom designed for your model, can not kill the machine.
  • Custom rekaveri during operation in the normal mode does not affect the duration of battery life.

Backing up the firmware image (the backup):
  • Feature called backup (to internal-internal or external-external memory).
    All custom rekaveri create a backup copy of the kernel image (boot.img), the system partition (/ system), the user partition (/ data), the temporary storage section (/ cache).
    TWRP and PhilZ create optional backup image of rekaveri (recovery.img, both), section / efs (efs.ext4.tar, efs.ext4.win, efs.img, in TWRP at the level of this section, in PhilZ created separately, see. the description), a modem (modem.bin, in PhilZ created separately see. the description)

Restoring a backup firmware image (hereinafter referred to simply restore):
  • All custom rekaveri restore their own backups. TWRP PhilZ and optionally reduced (see. The description)

Installation is not signed by the manufacturer for updates (the update, update, or update.zip):
  • Through custom rekaveri can sew kernel image rekaveri, efs, the firmware (not just the ones that are packed under the Odin Odin), modems, individual files packed in zip-archive for installation through rekaveri (see. The disclosure of fashion, firmware). Installation is made through a point install (install update.zip).

Optional cleaning (wipe / format) system):
  • Deleting files (data), the formatting of the selected partition. In different versions of custom rekaveri works differently (see. Description)

When update.zip firmware, backup, restore, backup and actions fall various bugs:
  • View a log of the work of a custom rekaveri possible through point show log. Log will be displayed directly in the recovery mode.
  • Create the log by using the tool create log (see. The description of a particular version). After the reboot, log will be available on one of the carriers.
  • View log after restarting the path /cache/recovery/last.log

How to restore the stock recovery:
  • Using the software, Mobile Odin (See above.) To select the firmware to select only part of the recovery firmware flash.
  • With the help of Android Terminal Emulator Program (See above.)
  • Replace stock rekaveri in the archive with the custom rekaveri and flash archive last.

On devices Samsung adb sideload feature does not work. It is designed for installation by the manufacturer signed (ota-update) updates. Some manufacturers of devices spread such updates on the official websites, where users can download and install them throughadb(Adroid debug bridge).

How to extract files from a backup:
  • Backups format .ext4.tar any archive computer or mobile device (e.g.,В® Root Explorer (File Manager)
  • The desired unit backup format in .ext4.win rename .tar and extract as described above
  • applicationВ® Nandroid ManagerYou can restore both applications and data. You can also restore sms, contacts and call log


Types of a custom rekaveri
CWM

[Attachment = "4382886: clockwor ... recovery.jpg"]

Description

Homepage - http://www.clockworkmod.com/
Download Page - http://www.clockworkmod.com/rommanager
Discussion page on xda-developers.com - http://forum.xda-developers.com/showthread.php?t=2200501


CWM Touch

[Attachment = "4382886: clockwor ... recovery.jpg"]

Description

Homepage - http://www.clockworkmod.com/
Download Page - http://www.clockworkmod.com/rommanager
Discussion page on xda-developers.com - http://forum.xda-developers.com/showthread.php?t=2200501


PhilZ Touch

[Attachment = "3550560: PhilZ2.jpg"]

Description

Discussion page on xda-developers.com - http://forum.xda-developers.com/showthread.php?t=2002953
Download Page rekaveri by Phil3759 - http://goo.im/devs/phi...Advanced_Edition/i9300
Download Page rekaveri from JustArchi - http://d-h.st/users/Archi/?fld_id=34646#files
Download Page rekaveri from temasek - http://d-h.st/users/temasek/?fld_id=27967#files
Download Page rekaveri from arter97 - http://arter97.com/bro...3/kernel/xda/recovery/


TWRP

[Attachment = "3550555: TWRP1.jpg"] [attachment = "3550556: TWRP2.jpg"]

Description

Homepage - http://twrp.me/about/
Download Page - https://dl.twrp.me/i9300/
Discussion page on xda-developers.com - http: //forum.xda-devel...ouch-recovery-t1943592
informal discussion page (test) builds TWRP Homebuild - http: //forum.xda-devel...sas-homebuild-t3253176


Carbon open Touch Recovery

[Attachment = "7192348: icon_header.png"]

Discussion page on xda-developers.com - http: //forum.xda-devel...ouch-recovery-t3261923



Latest Versions
CWM 6.0.5.1[Non Touch]
CWM 6.0.4.7[Touch / Non Touch]

--------------------------------------------------------------------------------------------------------

PhilZ Touch 6.48.1[JustArchi]
PhilZ Touch 6.48.4[Phil3759]
PhilZ Touch 6.57.5 with support f2fs[Arter97]
PhilZ Touch 6.58.9[Temasek]
Philz Touch 6.59.0 with full support f2fs[Arter97](Before installation carefully read the warning)
Philz Touch 6.59.0 - the latest version (from 02/22/15)[Arter97]

--------------------------------------------------------------------------------------------------------

Official builds TWRP versions above 2.8.7.0 displays the version 2.8.7.0

TWRP 3.0.1-0 for EEPROM through TWRP / CWM or Odin
TWRP-3.0.0-2-i9300 for flashing through TWRP \ CWM and ODIN
TWRP 3.0.0-1 to Odin and TWRP / CWM
TWRP 3.0.0-0 for flashing through Odin and Mod Recovery
A little explanation on TWRP
Of. TWRP 2.8.7.3 for flashing through Odin and Mod RecoveryOf build TWRP
Homebuild TWRPInformal. TWRP assembly with experimental functions (multilingual, screen lock, etc.).
TWRP 2.8.6.1 Theme Marshmallow
TWRP [Theme Materialised Light]TWRP new splash + design theme Materialised Light

---------------------------------------------------------------------------------------------------------

Carbon open Touch Recovery v.1.0


Instructions Utility

Polls
[Attachment = "3701262: Opros_1.PNG"]

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.



Post has been editedMalfurion - 02.04.16, 13:41



Rep: (1806)
Dimems @ 13.10.2013, 13:37*
confuses what might need to update something

If it works you can remain on 5.5.0.4, most importantly to meet the needs and gratitude to the interface.



Rep: (233)
Guys year sitting on the CWM Touch philz, except it did not use any rekaveri. but annoying that small string, I miss, not the press. I think to try TWRP. Functionality is the same as the big button. The cap has both go on TWRP. Prost again clarify want to understand correctly, that fils TWRP go to help В®GooManager? Just read the subject of a program, did not see such a possibility .. You can transfer details? thanks in advance..
or openrecovery-twrp-2.6.3.0-i9300.zip.zip can be sewn as a regular rum? By the way, why in double zip title?

Post has been editedseferon - 27.10.13, 20:51



Rep: (3317)
seferon @ 27.10.2013, 21:24*
but annoying that small string, I miss, not the press.
You can increase the height of the strings through rekaveri settings.

seferon @ 27.10.2013, 21:24*
You can transfer details?
Yes, as a conventional sew zip.

seferon @ 27.10.2013, 21:24*
Why in double zip title?
Glitch in the enclosure name.

In general, read the FAQ and PhilZ Touch - description. There are answers to all your questions.

Post has been editedshoma_81 - 28.10.13, 00:34



Rep: (227)
Do manual appear on two more recovery? I mean recovery dualboot - this from Siyah and Googy.



Rep: (3317)
XOPPOP @ 29.10.2013, 05:11*
recovery dualboot - this from Siyah and Googy.

If they were set apart, the manual would be. If you wish, please, create. At the very desire to delve into this system there.
So the topic is oriented to those who do not want to walk the sites and collect information about the versions rekaveri and / or do not speak English. And the updates easier to follow, because Forum on the go all the same.

Post has been editedshoma_81 - 29.10.13, 06:44



Rep: (4)
GT-I9300 S III CWM I set " philz_touch_5.18.5-i9300 "Firmware was MIUIv5 3.10.25 . I decided to change to " miui_datagutt_3.10.25 - [ROM] [PORT] [4.2.2] "MIUI v5 3.10.25 "Decided to update it, as always, went into rekoveri and then bam ... And it except the folder" klokvork rekoveri "That does not see. And wipes are pre-made and delvik cache. Like everything is done carefully, and there's a story. I decided to change the other CWM ... I Download this the CWM, that hat," CWM 6.0.4.3 (Odin) - recovery-clockwork-6.0.4.3-i9300.tar.md5 "Through one I installed it. I go to the" choose zip from / sdcard "I saw all of the files, but for some reason under the folder" 0 . "- where all files in the loaded system via any file manager these files as I can not get, and through yusbi also did not see, he sees all the files only if such events CWM is what we could from there without a system to pull out all the files and moved from the hidden folder " ABOUT "Open to any other that I have seen all of these files (their 9 gigs in the internal memory) Guys help me, send to the section where everything is discussed possible. Just tried to search but that it is impossible to find. Thank you.

Post has been editedaleksandr_kazako - 02.11.13, 00:21



Rep: (3317)
aleksandr_kazako @ 02.11.2013, 01:17*
I go to the "choose zip from / sdcard" to see all the files, but for some reason in the "0 folders

4.2.2 On the way changed and probably because of this was such a mess. I recommend to check out the FAQ by their firmware.
With the transfer of files copesВ® Root Explorer (File Manager)(In the new version with auto-mounting fs). If it does not work out, it is again a question at the firmware, because Stoke on program work out as expected.



Rep: (12)
After firmware 4.3 can deliver custom rekaveri?



Rep: (3317)
shreder954 @ 05.11.2013, 14:40*
After firmware 4.3 can deliver custom rekaveri?

Can.

Post has been editedshoma_81 - 05.11.13, 15:58



Rep: (9)
I sink firmware 4.1.2 rekaveri TWRP, want to put a 4.3 if I could do it, will fly TWRP?



Rep: (3317)
zebs,
Fly off. Because it rekaveri - part of the firmware and thus sew stock. Details Topic firmware.



Rep: (28)
Firmware 4.3. PHILZ rekaveri. When choosing a reboot, writes the type of root that can be lost. And the options no, fix root, back. .. what to choose and what it involves, on the 4.1.2. this was not.



Rep: (3317)
dmitry2310,
In TWRP the same issues, but I did not notice the difference and like nothing fixes. root of the problem in the most 4.3 and rekaveri to do.

Post has been editedshoma_81 - 10.11.13, 21:28


Full version    

Help     rules

Time is now: 10/07/20, 20:59