The forum decided to post images under the spoiler

Router (router) TL-WR841N TP-LINKis a device capable of transmitting wireless network data at speeds up to 300 Mbps. This router is great for small offices, as well as for creating a wired and wireless Internet connection at home.

The router (router) is distinguished by a rather simple setup, which is conventionally fashionable to be divided into several stages. The first involves connecting the TL-WR841N TP-LINK to a computer.



To do this, you need to turn on the router to the network, then connect the Internet cable to the WAN port and the cable that comes with the router (router) to the LAN port; connect the other end of this cable to your computer.

After that, you need to configure the local network. To do this in Windows XP, go to the properties of "Internet Protocol Version 4," you must select "Obtain an IP address automatically" and "Obtain the DNS server address automatically." To activate these parameters, you must go to the Network Connections folder, then select the Local Area Connection properties with the right mouse button and open the Internet Protocol.

These same parameters, i.e. “Obtain an IP address automatically” and “Obtain DNS server address automatically”, you need to install in Windows Vista and Windows 7 (if you use one of the OS data). Only in the first case, you need to go to the Network and Sharing Center, then to Manage Network Connections, where you need to select Local Area Connection, then Properties.

In Windows 7, in the “Network and Sharing Center” folder, you need to select “Change adapter settings”, then “Local Area Connection”, then proceed as described above.

After configuring the local network, you need to open a browser and enter the IP address of your router in the address barhttp://192.168.0.1, press "Enter" and pass authentication. To do this, in the “Username” and “Password” lines, you need to enter “admin”, since “admin” by default is both the name and password to access the settings of the router (router) TL-WR841N TP-LINK.



The next configuration step is the router firmware (router). To do this, open the tab called "System Tools" and select the line "Firmware Upgrade". You will see that you need to attach a file containing the firmware. In the event that you do not have such a file, you will have to download it from the tp-link website. After downloading the file, the firmware process will complete, the router will reboot.


Next, open "Network", select "WAN" and configure the type of connection you need in the field called "WAN Connection Type". After entering all the necessary information, press the "Save" button. If you need to fill in the line "MAC Clone", then you need to select "Clone MAC Address", then you also need to save the settings.



Setting up a wireless network is much faster. First you need to select the tab “Wireless”, then “Wireless Settings”, enter the name of your network there so that it can be easily found, if you wish, you can specify your region.



After that, open the “Wireless Security” tab, where you enter the security key, select “WPA-PSK / WPA2-PSK”, then “Encryption”, where you set a parameter called “TKIP”, in the “PSK Password” field, enter the password which will protect your network from unauthorized access.