TP-Link TL-WR740N - Discussion | [wifirouter] Discussion, firmware, problem solving



Rep: (1982)
TP-Link TL-WR740N- Discussion

Attached Image

The forum decided to post images under the spoiler Attached Image

A photo:
Attached ImageAttached Image

Description:
TL-WR740N - is a combined wired / wireless network device that provides shared Internet access and combines the functions of a router and 4-port switch. This router uses 802.11n technology and is compatible with all devices that support 802.11b and 802.11g standards. It provides data rates up to 150 Mbit / s, which is significantly higher than the rate on the basis of 11g devices, and allows you to enjoy applications such as watching a video, IP-telephony and online games anywhere in your home or office. Experience all the benefits of 11n technology with TP-LINK wireless devices!
Provides data transfer rates up to 150 Mbps
CCA technology improves wireless network performance by automatically preventing channel conflicts
WDS support for expanding your network
One-touch QSS quick setup
The priority function ensures the quality of sensitive applications such as video viewing and calls over the network
SPI firewall support and access control features
WPA / WPA2 encryption support
Full compatibility with devices that support the standards 802.11b / g / n

Specifications:
Hardware
Ports 4 10/100 Mbps LAN port
1 10/100 Mbps WAN port
Buttons Quick Protection Setting Button (QSS)
Reset button
External power supply 9V DC. current / 0,6A
Standards of wireless data transmission IEEE 802.11n *, IEEE 802.11g, IEEE 802.11b
5dBi antenna fixed omnidirectional antenna
Size (W x L x H) 174 x 118 x 33 mm
Parameters of the wireless module
The frequency range of 2.4-2.4835 GHz
11n signaling speed: up to 150 Mbps (dynamic)
11g: up to 54 Mbps (dynamic)
11b: up to 11 Mbps (dynamic)
EIRP (Wireless Power)<20dBm (EIRP)
Sensitivity (reception) 130M: -68 dBm with 10% PER
108M: -68 dBm with 10% PER
54M: -68 dBm with 10% PER
11M: -85 dBm at 8% PER
6M: -88 dBm with 10% PER
1M: -90 dBm at 8% PER
Wireless functions Enable / Disable broadcast, WDS bridge, WMM, Statistics
Wireless protection 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Software features
WAN connection type Dynamic IP / Static IP / PPPoE / PPTP (dual access) / L2TP (dual access) / BigPond
DHCP Server, Client, DHCP Client List, Address Reservation
QoS (Quality of Service) WMM, Bandwidth Control
Port Forwarding Virtual Server, Port Launch, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN pass-through PPTP, L2TP, IPSec (ESP Head)
Access Control Parental Control, Local Control, Host List, Access Schedule, Rules Management
Network security (firewall) DoS, SPI firewall
Filtering by IP Addresses Filtering by MAC Addresses Domain Filter
Binding IP and MAC addresses
Management Access Control
Office in place
Remote control
Other
Certificates CE, FCC, RoHS
Scope of Delivery TL-WR740N
1 fixed omnidirectional antenna
Power Supply
Information disc
Quick Installation Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў or Windows 7, MACВ® OS, NetWareВ®, UNIXВ® or Linux.
Environmental Parameters Operating Temperature: 0 ℃ ~ 40 ℃ (32 ~ 104 ℉)
Storage temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
Humidity (operating mode): 10% ~ 90% non-condensing
Humidity (during storage): 5% ~ 90% non-condensing
Firmware
Useful:

Topic Curator: Topic with no curator


Post has been editedninja88 - 11.04.20, 10:13
Reason for editing: Adding USB-port, increase memory, and a USB flash drive 64/8 (TL-WR740N V5)



Rep: (1454)
TheHellsing @ 15.04.20, 16:58*
I could not postavte since opkg cut
put withofficial siteand install the required packages.



Rep: (0)
valeramalko @ 15.04.20, 15:05*
put on the official website and install the required packages.

so we need to understand how something



Rep: (46)
TheHellsing @ 15.04.20, 14:58*
I thought that joke openwrt this firmware is that you can put openVPN

This is a fairly weak router for OpenVpnhttps://openwrt.org/do...pn/openvpn/performance, And will not fit in the standard memory with all the settings of the Internet package that I put together in the firmware. And everyone can gather for himself if he does not suit my build :)



Rep: (0)
Prompt dd-wrt support l2tp?



Rep: (0)
* valeramalko,
how to go to the settings connected lokalke him to 192.168.0.1 does not go, simply ship a long time and then
Unable to access the site
Timeout response from 192.168.0.1 site.
Try the following:

Check your internet connection.
Check the proxy and firewall settings.
Run network diagnostics on Windows
ERR_CONNECTION_TIMED_OUT



Rep: (1454)
HaboretsSH @ 17.04.20, 21:46*
how to go to the settings connected lokalke him to 192.168.0.1 does not go
not enough information,why the question to me with reference to the post?



Rep: (0)
you just posted on firmware OpenWRT 18.06.8 RUS, a man who wai faille was not, I have it either after installation with a native, but also to the address 192.168.0.1 not konekt



Rep: (1454)
HaboretsSH @ 17.04.20, 21:57*
and address of 192.168.0.1 not konekt
in openwrt 192.168.1.1 (see. in the properties of the network connection on the PC gateway address).



Rep: (0)
* Herzz You mean by brazuer in setting the router MAC copy?
P.S. Just never this had affairs ...



Rep: (2)
help me please . I put openwrt 18.06. everything works but why it is not opkg this can not configure iptv. what to do ? option is also no

Post has been editedhinteor - 22.04.20, 12:46



Rep: (569)
hinteor @ 22.04.20, 12:43*
but why no opkg ... what to do?

Means the firmware is collected without the package manager, put the official release from the site, there will be.



Rep: (2)
stp101 @ 22.04.20, 15:56*
place the official release from the site, there will be.


where you can find it, and if its installation is different?

Post has been editedhinteor - 22.04.20, 13:11



Rep: (2)
hinteor @ 22.04.20, 13:43*
No opkg this can not configure iptv

opkg will not help you, because flash is no free space for your hotelok.
What is the problem with IPTV?



Rep: (2)
ddr277ddr @ 22.04.20, 16:23*
What is the problem with IPTV?

mag250 at me from the service provider. there is no picture or sound when you try to watch any channel



Rep: (2)
or can anyone tell how to adjust without opkg IPTV / UDP multicast?



Rep: (46)
hinteor @ 22.04.20, 14:22*
or can anyone tell how to adjust without opkg IPTV / UDP multicast?

https://openwrt.org/ru/doc/howto/udp_multicastand generally later rebuild firmware 18.06.8 addingigmpproxy



Rep: (2)
MrThree @ 22.04.20, 18:13*


option igmp_snooping 1

I have no option

opkg update

I do not have opkg

Posted on 22/04/2020, 16:40:

and the router does not return to the drain and not updated



Rep: (46)
hinteor @ 22.04.20, 16:38*
option igmp_snooping 1

I have no option

It fits into the file / etc / config / network you have entered the vi editor via ssh?



Rep: (2)
* MrThree ,
Via ssh. We must try to vi



Rep: (46)
hinteor @ 22.04.20, 16:49*
Via ssh. We must try to vi

enter ssh cat / sys / devices / virtual / net / br-lan / bridge / multicast_snooping that will give?
and in general can be the same and through the kerf Luci)

Attached images
Attached Image


Full version    

Help     rules

Time is now: 21/08/20 23:40