FAQ on Sony Ericsson x10 rom | Sony Ericsson XPERIA X10, Rachael



Rep: (113)
How to install MIUI firmware?

The installation process on almost all firmware is the same.

1) Copy to the root of the memory card the archive with the firmware and everything that is attached to it (patch, crack).
2) Restart the phone and go to the xRecovery menu.
3) ChooseFactory Reset (full wipe) and confirm the action.
4) ChooseWipe Cashe Partition and confirm the action.
5) ChooseAdvanced option and there Wipe Dalvik Cache and confirm the action.
6) Go back to the main menu and select Install custom zip, click Choose custom zip from sdcard and select our archive with firmware.
Note: If you want to install a crack, patch, or any addon, immediately (without leaving xRecovery) repeat step 6.
If you install the crack, patch, or any addon later (after reboot), then once again perform the following points:

4) ChooseWipe Cashe Partition and confirm the action.
5) ChooseAdvanced option and there Wipe Dalvik Cache and confirm the action.
6) Go back to the main menu and selectInstall custom zip push Choose custom zip from sdcard and choose our archive.

More information about MiUI can be found in the topic.Sony Ericsson Xperia X10 MiUI Firmware. The material is taken from there.



Rep: (113)
How to flash a phone using Flashtool?

Charge your phone before flashing! Do not hold the phone in your hands, the contact may come off and the process will be interrupted !!
  1. Download firmwarefrom here (.ftf firmware file format) and flashtool .
  2. Throw the downloaded firmware into the folderfirmwares at the root of flashtool.
  3. Open the flashtool, click on the pentagram"lightning" (flash button) and select the firmware file.
  4. We do everything that is shown in the picture.
    • Turn off the phone.
    • Press and hold the back button on your phone.
    • Connect the USB cable to the phone.
    • Release the back button after the green light on the phone lights up.

  5. Everything, you have stock firmware!


Post has been editednecopro - 10.02.13, 17:26



Rep: (113)
The phone hangs on the inscription "Sony Ericsson" (white on black)

If after unsuccessful manipulation with the phone, it hangs on the label"Sony Ericsson" (white on black). Such a fail can only be solved in one way! After flashing the phone !
But if you tried to unlock the bootloader according to the instructionsпїЅ1 or пїЅ2 then it is quite possible that you forgot to put a custom kernel for unlocked bootloader.

Post has been editedRage - 18.09.13, 11:25
Reason for editing: removed signature



Rep: (113)
The phone does not turn on.

Sometimes there is such a malfunction on this device: the battery is completely discharged and the phone does not want to turn on, it only vibrates.
Solutions to the problem:
  1. With the help of a universal battery charger "Frog";
  2. By connecting the phone to the PC;
  3. By pressing the power button and the middle button.
Original post.


Full version    

Help     rules

Time is now: 18/10/20, 11:51