Hello! It is known that intra-channel headphones have a bad feature over time, the earwax gets clogged up and starts to sound quiet. I found a video in the Internet in which a guy shows how to make a container with 2 plugs and electrical tape, but I didn’t like his method, because every time you clean, you need to cut electrical tape, and I decided to make my more practical option.
Components :
1 . Any cork from a plastic bottle. I took from Morshyn.
2 . Paper clip, nail, needle, etc. It is necessary to straighten the paper clip so that it is straight, and at the end make a bend for comfortable holding.
3 . A plastic card. Any plastic card, such as (bank, payphone) will do.
First, take the lid, clip and go to the kitchen. Turn on the gas on the stove and heat the paper clip to start glowing
as a new year tree. We make small indentations as in the photo (diameter of the indentations, select individually, depending on the cable width of your drops). Next, take a plastic card and cut a strip
2,7 see in length and
1,5 cm wide. Insert the partition in the center of the cork and firmly fix it. You fill the container with hydrogen peroxide, alcohol up to about half, insert the headphones and leave it for an hour. After you take the 2nd clothespins and in the center of each earpiece and let them dry. At the end of the photo device.
You can also suck up excess fluid with a vacuum / syringe or with your mouth.
Post has been editedpirate.usr - 13.12.16, 07:53Reason for editing: +1 by Kwadjo