> Important!

New threads need to be created only inroot partition! In the future, they will be processed by moderators.

If you posted a new version of the program, please notify the moderator by clicking the "Complaint" button on your message.

Catalog of Android programs



DinoDyno | It measures the amount of horse-power car



Rep: (8)
DinoDyno
version: 0.9

Last update of the program in the header:08.06.2011

Attached Image

Description taken from tutorial'a:
________________________________________________________________________________
To Perform a Dyno Run:
Press Menu and select "Dyno". Currently the dyno needs the phone to be lying flat on its back. You can be sure that the phone is positioned correctly if the accelerometer in the corner is reading 0.0 and 0.0. Or something close to that. You will also have to position the phone so the top of the phone is facing forward. Then simply tap the box to stage the dyno. At this point, they dyno will begin after it sees the specified acceleration trigger which the user can specify (default is 0.2g). You can start accelerating the vehicle. The dyno will stop recording after it reaches one of the two set stopping parameters. Time or Distance. Default is 660ft, or 1 / 8th of a mile. Once the run is complete you will be prompted to discard the run, save it temporarily, or save it permanently by storing it to the SD card.

To take a measurement:
1) Press the "Menu" and select "Vehicle", type in the parameters of your car and keep pressing the "Menu".
2) Press the "Menu" and select "Dyno".
3) Put the phone on the back cover.
4) The phone is in the correct position, if the accelerometer in the corner shows 0.0 and 0.0. Or something close to it.
5) The upper part of the phone needs to be directed in the direction of travel. 6) Click on the part of the screen where it says "Tap To Stage Dyno".
7) The measurement starts after the start acceleration by default in the program set an initial threshold of the beginning of the measurement when the value of the acceleration 0,2g (Dino Settings ->Acceleration Trigger).
8) Start vehicle acceleration. Recording stops when reaching one of several parameters:
2-identical accelerations measurements;
A specified time;
Distance. By default, 660 feet or 1/8 mile.
9) After the completion of the measurement, you will be prompted to save it temporarily (at the close of measurement applications are not saved) or save it to the SD card.

________________________________________________________________________________
Viewing the Run:
Press Menu and select "Analyze". Tap the blue "Run Manager" box at the bottom of the screen to bring up all the recently recorded dyno runs. If you wish to load a run from the SD card, select Run Manager from the bottom of the list. This will bring up all the dyno runs stored to disk. Select one to load it to the analyzer for viewing. From the Analyzer, select the run you wish to display. You can display multiple runs over each other for comparison. Technically you may display as many runs as you wish. Now you can touch the screen to bring up details about that part of the run (velocity and power). You can use the trackball for finer viewing of the graph.

Viewing measurements:
1) Press the "Menu" and select "Analyize".
2) Click on the blue box "Run Manager" screen to display all recently recorded time measurements. If you want to download the stored measurements from the SD card, select Run Manager in the pop-up window. Select one to load it in the analyzer for viewing.
3) You can display multiple measurements for comparison.
4) Tap the measurement chart to display the information on speed and power. You can use the trackball to view graphics.

________________________________________________________________________________
Using the Logger:
Press Menu and select "Logger". Like the dyno mode. You need to put the phone flat on it's back with the top facing forward. You can toggle through the 3 different maximum displays by tapping the toggle button in the top left. Reset will reset all the maximums to zero. Simply tap the blue area at the bottom of the phone to begin recording the accelerometer values. Tap the now green area to stop the log and be prompted if you wish to save the run or not. The run will be saved to the SD card if you wish to save it. Currently there is no functionality to load logger runs from the SD card. But you can copy the .txt file to your computer for analysis or overlay onto video etc.

Using the "Logger":
1) Press the "Menu" and select "Logger".
2) Put the phone on the back cover the upper part of the front. Use the "Toggle", you can switch between three different types of display maximum measurement values. Reset to 0 is carried out "Reset" button.
3) Click the blue area at the bottom of the screen to start recording accelerometer deviations.
4) Click the green area at the bottom of the screen to stop the recording and save the measurement to the SD card (no function to download measurements from the SD card for the analysis in the application. However, you can copy a text file to a computer for analysis or application to video, etc.)




Homepage: http://www.dinodevelopment.com/forum/
Android Market: http://androidik.ru/android-market/applica...24.com.DinoData


Download:
Attached filecom.DinoData.apk(1.28 MB)


Post has been editedfreemsk1 - 17.10.11, 00:14



Rep: (177)
It would be better on the English left. Nifiga not understand :)



Rep: (66)
oh yeah, that's for sure that does not understand



Rep: (8)
At the request of the workers added English tutorial ...
I tried this program in action, it is strange, but it seemed strange matter ... I have the M3, 150 passport prog ... showed 78 (((
If anyone still a test ... otpishites



Rep: (143)
It is a program from the category of "Call to short number ****** and you can see through the clothes through the camera of your mobile ..."



Rep: (246)
Why does she need if l.c. and so are known. About anything.



Rep: (72)
Well, it may be useful,if works For fans of tuning. Here for example put forward flow, as well as increased capacity, specifically?))
If it justify itself would be cool to try - how many 402 (or whatever) will drive m))

Post has been editedPr0t0n - 05.06.10, 09:09



Rep: (10)
An interesting program that free analogue Dinomastera only functions are much smaller and do not have the possibility to present the results in the metric system. Probably due to the fact that while this is a beta.
Respect if bring to mind. : Thank_you:



Rep: (7)
Danny83 @ 4.6.10, 11:37*
At the request of the workers added English tutorial ...
I tried this program in action, it is strange, but it seemed strange matter ... I have the M3, 150 passport prog ... showed 78 (((
If anyone still a test ... otpishites

Along the way, shows the power is not in the horse and in kilowatts - though too small.



Rep: (7)
Read materiel: Passport engine develops power at certain speeds. For example my taoty is 124 horses at 4500 rpm \ min. Other power speed less. Since PPC is not the CVT change speed during acceleration, power, too, respectively. At best, the program measures the acceleration. But not the power.



Rep: (10)
Reading physics: D:

Power - a physical quantity, equal to the ratio of work performed for a certain period of time, this period of time. Those. N = A / t, where A is a work, and t - time.

If the moving body a force, this force does work. The power in this case is equal to the scalar product of the force vector to the velocity vector, which moves body: P = F * v, F - force vector, v - velocity vector.
On the other hand, according to Newton's second law: F = m * a, where F- force, m - mass, and - acceleration. The formula for calculating the velocity through the acceleration will not result. Thus the power P = m * a * v. Those. to calculate the instantaneous power at the wheels of the car we need to know the value of 2, this - the acceleration and the vehicle weight.
The program measures the acceleration, we ask a lot of =>We outlet have power distribution schedule from time to time.

?????????

PROFIT



Rep: (246)
Pr0t0n @ 4.6.10, 21:18*
Here for example put forward flow, as well as increased capacity, specifically?))

The power increase is checked for special stand with selection produce desirable hubs. There also is measured torque. A program about anything :)



Rep: (190)
Defo @ 7.6.10, 11:05*
The power increase is checked for special stand with selection produce desirable hubs.


In a first approximation (i.e., if the difference is visible) and is normal. Nastende engine rebuild can be tiring. And it is expensive.



Rep: (0)
Danny83 @ 4.6.10, 11:37*
strange matter ... I M3, 150 passport prog ... showed 78 (((

And what's so strange, Mazda just do little things to different parts (+/- 72 hp is more normal). Although I did not dare to challenge the quality of the car, but still at no BMW and hedgehog with them. So that a normal result. Now you know exactly the potential of his car :-)
And the rest of us, we know the potential of the driver of one of the thousands of m3 dorogah our obyatnoy not ;-)
Defo @ 4.6.10, 11:49*
Why does she need if l.c. and so are known. About anything.

Basically all the same in the TCP prescribed rated power, with the car plant out as one ... faceless. But mankind has always wanted to compete pi ... kami, and when they are the same, there is a reason that will measure the unique characteristics of your pi..ki. Somebody fastens long mudguards with gothic inscriptions Sparco and someone would still like to get to the truth and to know and how many are in his amazing pepelats hp (And perhaps each of them to give a name)
plush salmon @ 4.6.10, 11:46*
It is a program from the category of "Call to short number ****** and you can see through the clothes through the camera of your mobile ..."

you're so vain, the idea is cool, if still rely on the result of measurement (known to errors) in theory and can be used directly with Hach tyuninke a la pryamatok.
Pr0t0n @ 4.6.10, 21:18*
If it justify itself would be cool to try - how many 402 (or whatever) will drive m))

congratulations for this already invented a stopwatch, do not bother so much :-)
haltol @ 7.6.10, 9:53*
Along the way, shows the power is not in the horse and in kilowatts - though too small.

in the course of the screenshot exactly HP says that the reduction is nothing but Horse Power
Defo @ 7.6.10, 11:05*
The power increase is checked for special stand with selection produce desirable hubs. There also is measured torque. Prog nothing

Not everyone in this Raschke have our own stand, or even the ability to get close to this booth ... And if in the program (or unit) would be a decent error in the area of ​​+/- 3% say it is quite a program can be a substitute for that your stand :-)

Thanks in advance for your kamenty



Rep: (18)
All have longdevised and done

If implementation has been used as an appropriate instrument in this - for the program could be used to pay real money



Rep: (10)
I tried this program in action, it is strange, but it seemed strange matter ... I have the M3, 150 passport prog ... showed 78 (((

You have a passport and strange matter if talking about BMW M-series. Motors weaker 195l.s. in M3 was not ... it was the '85 year, the first production BMW M3 E30 in the back with a catalyst.
150 hp power is the usual two-liter engine.



Rep: (10)
diamq @ 9.6.10, 2:25*
You have a passport and bizarre values,


That's what he calls the Mazda 3: rolleyes:



Rep: (8)
diamq
just is offline mazdovodov Mazda 3, called the M3 ...))) used to have ...
my measurements were not true then ... the phone was in the wrong position ...
goooal
You must ride onbentley Brooklands once you have such a biased attitude to cars of the Japanese car industry ...



Rep: (0)
hi m3klab.ru and mazda3-klub.ru))
veilside93, black pug.

pancake, spring will have to wait to try out a program ... until the 4th transfer slips =)



Rep: (0)
veilside93 @ 30.12.2010, 19:31*
hi m3klab.ru and mazda3-klub.ru))
veilside93, black pug.

pancake, spring will have to wait to try out a program ... until the 4th transfer slips =)

ha ha hello from mnemonics)))



Rep: (0)
vooboe on the drive is more difficult to measure ... maybe slipping.

goooalStopwatch is a good thing, of course, but it is necessary also to take a ruler to measure out 400m ... and then he faced off distance and speed.


Full version    

Help     rules

Time is now: 24/10/20, 12:34