Here nakidal chertezhik in haste ....
most importantly - the power connector on the USB-cradle (+) is not supplied!
it goes directly to the controller via a microswitch cradle ...
and (+) PDA shki not taken on the cradle identity personal
from usb-wiring only take the overall lead (screen negative) and date () and date (-).
those. 3 wires total.
pitanies Batteries soldered to the feeding (charging) in dop.razeme
it turns out that BATT is permanently connected to the connector (mother) charging
and went food when connected to PDA ...
you just have to charge - 2 options: you can with the PDA - can be individually ...
Batteries are connected in series-parallel x 2 x 4 pcs 1.2V
Attached files
ris1.pwi(32.39 Kb)