Xiaomi Mi Router 3G - discussion | Wi-Fi Router



Rep: (1237)
Xiaomi Mi WiFi Router 3G - discussion пїЅ
Wi-Fi Router

Attached Image


Description
This device is an improved modification.Xiaomi Mi WiFi Router 3. In appearance, there are no differences, except for the weight of the device, since the novelty received a built-in aluminum radiator.
The router fitted with a dual core processor MT7621A with a frequency of 880 MHz, 256 MB RAM DDR3-1200MGts and 128 MB flash memory. The device simultaneously in two bands: the 2.4 GHz band (up to 300 Mbit / s mimo 2x2 40MHz) and 5 GHz (up to 867 Mbit / s mimo 2x2 80MHz).
From the ports on the device one USB 3.0 port, two LAN ports (1 Gb / s) and one WAN port (1 Gb / s). The difference between Mi Router 3 and 3G in featuresofficial website.
Additional Images
Attached Image
Attached Image

Specifications
Official site
  • CPU: MT7621A 880 MHz
  • ROM: 128 MB SLC Nand Flash
  • RAM: 256MB DDR3-1200
  • USB 3.0 (5V / 1A)
  • 2.4 Ghz WiFi 2x2 (up to 300 Mbps)
  • 5 Ghz WiFi 2x2 (up to 866 Mbit / s)
  • WAN up to 1 Gbps
  • LANx2 up to 1 Gbit / s
  • Power supply 12V / 1.5A Plug: 5.5x2.1 mm
Instructions and useful information
All actions performed with the router you do at your own peril and risk. When using custom firmwares, it is useful to have a USB-UART TTL 3.3v adapter

When installing firmware via Breed, pay attention to the choice of section and additional steps in the instructions.
Currently, the memory markup for unification has two cores (0x200000 and 0x600000).
From the first work: runoff, build OpenWRT frommogvai, PandoraBox and AsusWRT.
From the second: stock, original OpenWRT and Padavan.
Ignoring the correct choice of the kernel leads to the inability to start the firmware, problems in the work and failure of the update through the web interface.


Full team instruction for flashing from scratch


General instructions and information Stock Breed Padavan Pandorabox Openwrt Gargoyle Asuswrt
Firmware
Custom firmware and bootloaders
Modernization
The authors of the instructions are not responsible for the failure of your device. All manipulations are done only at your own peril and risk, and with understanding why this is necessary!

Applications
Applications miwifi and mirouter are designed and work only with stock firmware!
PictureXiaomi MiWiFi
PictureXiaomi MiRouter
PicturePadarouter -An application to work with iOS Padavan. Versionfromback37 and one more version from Sotik ;
Xiaomi family of routers onsavagemessiahzine.com
Previous polls
Attached Image
Attached Image

Picture
If you are here for the first time or want to ask a question, first look below

Mini FAQ on the topic. Novice Questions

"Version" R3GV2 - is not more than mi4Agigabit with another label. Differences clearly. Carefully read the description and picture before the purchase. All discussions device profile topic

  • Purchase, lifehacks at purchase, coupons are discussed in the topicClub lovers overseas shoppingandPurchase Xiaomi devices
  • Questions and answers on the assembly, configuration, and all not specific to this particular model of the router nuances on the firmware Padavan should look inprofile topic
  • Forall common not attached to this router questions on Openwrt take a look atthis topic
  • With questions on choice and comparison, welcomehere


If you could not find the answer to your question in the header, first use the search on the topic.

Picture

Are there differences between "international / European" and "Chinese" versions of xiaomi routers
The difference is only in the plug of the power adapter and the pre-installed firmware, there are no other differences
I bought a router. Should I change the firmware?
Not worth it yet. Read the cap and topic, assess your needs and capabilities, the answer will become more obvious to you.
How to bind a router to your xiaomi account?
  • At initial setting, the plugin-locator should bedisabled .
  • You must be registeredxiaomi accountand installed an application forandroid, iosorwindows
  • The router must have access to the Internet (for example, wan xiaomi is connected to the lan of another working router)
  • The device from which the binding is made must be connectedonly to xiaomi router network.

    In some cases, it is necessary to make a full reset with the reset button or try binding from different devices (phones, tablets, computers). All the above conditions must be fully met.
What is the difference between firmware, which one to choose?
Stock
  • The router comes with a "stock" firmware. There were no firmware with English for this router, no, and, practically guaranteed, it will not, but there is no fundamental difference between the "English" and "Chinese" versions, except for the presence of English in the first and more frequent updates of the second. Versions for developers also do not carry significant differences from the usual except for access via SSH.
  • The firmware is based on OpenWRT, but has very limited functionality, so if you need IPTV, a media server on the router, ipv6, bypass blocking, advanced network settings, connecting usb modems and printers, full torrent clients and other amenities, look in the direction of alternative firmware.
  • The miwifi app and the rest of the xiaomi ecosystem only work with stock firmware.
Padavan
  • Stable, high-quality and smart firmware, covering almost all possible needs of the ordinary and advanced user, having an interface in Russian.
  • It features convenient and clear settings.
  • There is support for multicast IPTV (Rostelecom, Beeline and any others), ipv6, hdd connection (including several), dlna media server, work with usb modems, printers, other usb devices, bypassing locks, downloading torrents, scheduler, launching custom scripts, installing additional packages from Entware and more.
  • Of the minuses, the difficulty of self-assembly.
  • It is possible to download the finished firmware
Openwrt
  • Known fresh kernel firmware from an international development team. Covers all possible standard and non-standard needs, incl. advanced users.
  • There is support for multicast IPTV (Rostelecom, Beeline and any others), ipv6, hdd connection (including several), dlna media server, work with usb modems, printers, other usb devices, bypassing locks, downloading torrents, scheduler, launching custom scripts, installing additional packages.
  • From minuses - the complexity of self-installation of the packages and settings. Sometimes behaves not stable.
  • There is an opportunity to download ready assemblies from updated posts in this topic.
The router cuts speed, problems with range and stability, what to do?
The first step is to understand the reason:
  • If problems are observed whenwired connecting:
    - Check the speed by connecting the provider cable directly, bypassing the router.
    -Check the number of wires in the cable and the quality of crimping of the connectors, in case of doubt, check on the other cable / replace the connector.

  • If problems withwirelessly connecting:
    - Check the settings set in the router and clients: region, range and width of channels, version of the communication protocol, support on the end device (relevant for 5 GHz).
    - Analyze the broadcast and select the least loaded channel.
    - Check the speed whenever possible on multiple devices.
    RWhen the air is loaded, far away from the router, there is interference from other devices (microwave oven, bluetooth device, etc.), the speed will always bemuch Below the maximum possible, these are the laws of physics and the principle of wifi.
    The range of action and penetrating ability of a 5GHz signal is noticeably lower than 2.4, this is a feature of the technology, and not a problem with your device.
    -In rare cases, it makes sense to check the reliability of the contacts of the antennas and the radiator on the router board by disassembling the device case.
    SpeedTest and similar online services are not reliable indicators of speed. The real speed can be found either with the help of iperf or a test download torrent with a large number of distributors. Mobile devices due to limited computing resources and, in some cases, rigid fixation of a narrow channel are also not always able to display real results.

Should I connect the 2.4 and 5 GHz networks into one and how to do it?
On the stock firmware there is a separate switch in the settings, for any others it is enough to set the same network names and passwords.
However, there is no full-fledged algorithm for working with interconnected networks on any firmware, so the client will choose the connection point himself, and there are no guarantees of the adequacy of this choice:
in the overwhelming majority of cases, the 5 GHz network will be connected to the last even with a weak signal if it is initially selected by the client, and, conversely, the client is unlikely to switch from 2.4 to 5 if it is already connected to it.
thereforeit is strongly recommended to abandon this feature and use separate networks
What is the Breed loader? Do I need it?
The bootloader in a router is similar to bios / uefi for a computer or recovery for a phone: it is he who is responsible for the low-level initialization, repair and download of the main firmware.
If you plan to use only stock firmware, you will hardly be useful, but installing third-party firmware will be your guarantee of security, ease of migration and updates. Therefore,highly recommended before any manipulation of the firmware install Breed: it is primarily in your interest.
  • The stock downloader has the ability to recover only via usb flash with the original firmware image.
  • The bootloaders built into Padavan and OpenWRT allow you to connect using an usb-ttl uart adapter and restore from the command line.
  • The Breed loader allows you to connect over a normal twisted pair, has a graphical interface (including in Russian when using the plug-in), ample opportunities to configure, change system settings, firmware and create backup copies.
I want to connect a modem / printer / ... to the hdd / usb router, will it work?
On the stock firmware, only drives will work, everything else is only on Padavan and OpenWRT.
  • All common file systems, disks are supported.any volume.
  • With a 99% percent chance, your usb modem will also start up without any manipulations, but using and setting up is much more convenient in the "hilink" mode, look for details in the profile topic of your device.
  • Printers will work in one way or another. There is no WPS on the Padavan firmware, use the manual configuration of the network for the printer using the manufacturer’s utilities on the computer.
Can I connect multiple devices to the router via usb?
Yes, there is such an opportunity. Be it several identical or different devices: hdd, flash drives, modems, printers, etc., get along well together.
Only restriction : devices should have enough power. therefore highly recommended Use a quality usb hub with your own power.
How to upgrade firmware? (any)
Two absolutely universal ways that work on all firmware:
  • Through the regular update menu in the web interface and the file with the new firmware.
  • Through the Breed loader with installing the firmware in the desired section in accordance with the instructions.
Nuances of updating builds and versions of OpenWRT, setting autoboot flags to breed and otherspecify in the instructions on which you originally installed the firmware
How to upgrade from one firmware to another?
The easiest and the correct version, first install Breed bootloader (if not already selected), and then install the new firmware through it (sectioninstructionshats)
The router is unavailable, the front diode is off.
First check the power adapter, it should have 12 volts at the output under load.
Connect to the router via LAN and check the resulting IP address:
-169.254.С….С… - automatic windows range (the router did not issue IP),
-192.168.С….С… - received from the router, try to access its web interface.

If the adapter is OK, but the front diode is off, there is no wifi broadcast, no LAN access: the area of ​​the NAND memory loader is corrupted, and the option is only 2:
-Vypivanie memory chip and firmware on the programmer (easier in terms of service, because programmers cost from $ 100-150)
-Transition to NOR (SPI) memory(costs in the range of $ 5)
After switching to SPI, there is also the possibilityrestore native NAND memory
The wrong partition was selected when flashing through Breed, what should I do?
It is enough just to go into the breed again, write the firmware according to the instructions in the desired section and, if necessary, specify the boot section by adding the autoboot rule, again in accordance with the instructions. No other action is required.
How to return / update the firmware if the drain is installed Breed
To do this, go to Breed bootloader firmware to flash the drain in both sections and remove autoboot rules, if any.Few details
What are the differences between the Mi-3, Mi-3G and Mi-4 routers, which one is better to choose?
On the basis of technical characteristics and capabilities, the 3G router will be the clear winner.
Attached Image

Model Comparison Chart routers Xiaomi
Attached Image



For upgrading and filling caps:QMS curatoralways open


Post has been editedM | A | G - 30.11.20, 13:46



Rep: (29)
* Rodstvennik63,
I think that in our config Scheme 2 cores 2 threads would work better than 2 cores 4 threads ... less competition for resources, and load 4 pct in the system does not exceed 2 per ... could be better plowing.



Rep: (503)
Ozonep @ 10/23/19, 13:46*
OpenWRT provides too many settings for customary use.

In stock OpenWRT at times less settings than in Gargoyle. You tried someone's assembly with a bunch of useless trash.

Fedyalutkovski @ 10/23/19, 18:14*
Tell me, after updating the firmware of Padavan from the web muzzle settings fly?

On which release flew one or two OpenVPN settings.



Rep: (297)
* riv22,
Well, try to assemble the firmware after edited / home /user/Padavan-ng/trunk/configs/boards/xiaomi/Mi-R3G/kernel-3.4.x.config
Attached Image


Post has been editedRodstvennik63 - 24.10.19, 15:39



Rep: (405)
RIV22 @ 10/24/19, 13:09*
Yes, and load 4 projects in the system does not go

I suppose it depends on the load. Here I, say, Tor, I2PD, Muscul and Pakhapa are one load, and Vasi Router solely distributes Wi-Fi and everything is the other load.

Post has been editedDart raiden - 24.10.19, 16:02



Rep: (29)
* Rodstvennik63,
Thanks for the tip ... until nothing is collected, put Padawan of your posts, without overclocking.
Are you sure about this item gipertreyding can simply disable the SMP?

* Dart Raiden,
About load agree, just about her grief, and that in terms of the core router 2 2 pct in better system must work optimally.
Miranda even be smarter than I think in this scenario, and even more simply CoMutation, immediately took to get laid.



Rep: (2)
I also wanted to clarify a relatively 4G modem. Is there an automatic transition function in OpenWRT when the main channel drops and returns back?
A script with pings in Cron comes to mind, but it may be a ready part or additional. BY?!



Rep: (263)
* Eugene NuAfanasevich,
Mwan3, he has even plugin for Luci there is to configure in the web interface



Rep: (297)
* riv22,
Well, I can't check, but you all cards in your hands. If Breed is worth the entertainment on health.



Rep: (24)
The1024 @ 10/24/19, 16:54*
* Evgeny Noufanasyevich,
Mwan3, he has even plugin for Luci there is to configure in the web interface

However, in order to configure it, it is still not a bad knowledge of the subject.



Rep: (263)
* alex-1900
Specifically, switching between the main and backup interfaces is not so difficult, I configured from the default template at once, even did not read the docks.
something more complex, yes, better handles through scripts, because the configs there are drug addicts, of course



Rep: (24)
* the1024,
This probably did not have any VPN access. (L2TP PPTP)



Rep: (297)
* alex-1900
And what is so special there? Connections are configured as usual, the channel itself is active: the connection is established, IP is obtained, etc.- Just waiting for its star hour when the main fall off. You immediately see, the working channel, or something wrong. A connection to the backup provider is not set at the time of transition to it, but as soon as you have enabled it. And then only make sure that the provider does not disable it for non-payment.



Rep: (42)
Rodstvennik63 @ 24.10.19, 20:53*
And what is so special there? Connections are configured as usual, the channel itself is active: the connection is established, IP is obtained, etc.- Just waiting for its star hour when the main fall off. You immediately see, the working channel, or something wrong. A connection to the backup provider is not set at the time of transition to it, but as soon as you have enabled it. And then only make sure that the provider does not disable it for non-payment.

Well, if you know another two routing tables, about the mechanism of channel check, do not forget about the metrics, about the types of channel reservation - everything is configured quite simple and understandable ;-)

Post has been editedalecsartania - 24.10.19, 21:28



Rep: (297)
* alecsartania,
How is everything difficult for you! : rolleyes: Okay, manuals are full on the network, that yes, like.
And it was about the types of channels: one L2TP, the second USB LTE, etc. They themselves are configured as usual.
That's why I can't endure OpenWrt- Music Fritty: Beee:
P.S. By the way, here's a smallinstruction,For which I once configured Mwan (not on this router, honestly).

Post has been editedRodstvennik63 - 24.10.19, 21:52



Rep: (38)
Here)
As promised, I post an update for Gargoyle.
This time - maximum speed. Included almost all packages (including topics), except languages ​​and sending e-mail.
Contains all the latest updates OpenWRT branches 18.06
https: //drive.google.c...zanwe0brmlv5hlruumztjo6
My recommendation is to install Flat Blue. Dark background, full screen. UI no longer looks like hello from the 90s)
* demon2003,
So I wrote - "contains all the latest updates OpenWRT branches 18.06".
I didn't want to do on the branch 19, since there was no release === there may be bugs and no features, the more so there was already laid out such an assembly.
Above the 18th branch still actively work, by the way, the last commit was yesterday)

* Fedyalutkovski,
Screen interface or what? ) OK now
Here is a hargole with the theme


Attached images
Attached Image



Rep: (15)
Tell me how to access a USB modem via VPN from home?

The bundle is:
-D: 192.168.1.1 - VPN Server, IPOE connection (DDNS configured)
- Duty: 192.168.0.1 - VPN Client (10.8.0.2), USB modem LTE (Gateway 192.168.8.1)
At the cottage, I have access to LAN at home and to the modem, from the house only in the router panel.

Post has been editedFreeunion - 25.10.19, 02:33



Rep: (65)
* FreeUnion
On the homepad register static route until 192.168.8.1 through the gateway 10.8.0.2



Rep: (0)
Tell me how to solve such a problem ... Every day the Internet disappears into the same time, about an hour and a half with it in the logs there are such lines:

Oct 25 15:22:46 Inadyn [4856]: checking for ip # Change, Connecting to Checkip.Dyndns.org (162.88.193.70:80)
Oct 25 15:22:47 Inadyn [4856]: No IP # Change Detected, Still AT 109.174.115.207
Oct 25 15:22:47 inadyn [4856]: Update Forced for Alias ​​vv.asuscomm.com, New IP # 109.174.115.207
Oct 25 15:22:47 Inadyn [4856]: Sending IP # UPDATE TO DDNS Server, Connecting to NS1.asuscomm.com (103.10.4.108:80)
Oct 25 15:22:49 Inadyn [4856]: Fatal Error in DDNS Server Response:
Oct 25 15:22:49 inadyn [4856]: [401 | Authorization Failed]
Oct 25 15:22:49 Inadyn [4856]: Will Retry Again After 60 min ...



Rep: (24)
Valovvladimir13 @ 10/25/19, 19:26*
Tell me how to solve such a problem ... Every day the Internet disappears into the same time, about an hour and a half with it in the logs there are such lines:

Oct 25 15:22:46 Inadyn [4856]: checking for ip # Change, Connecting to Checkip.Dyndns.org (162.88.193.70:80)
Oct 25 15:22:47 Inadyn [4856]: No IP # Change Detected, Still AT 109.174.115.207
Oct 25 15:22:47 inadyn [4856]: Update Forced for Alias ​​vv.asuscomm.com, New IP # 109.174.115.207
Oct 25 15:22:47 Inadyn [4856]: Sending IP # UPDATE TO DDNS Server, Connecting to NS1.asuscomm.com (103.10.4.108:80)
Oct 25 15:22:49 Inadyn [4856]: Fatal Error in DDNS Server Response:
Oct 25 15:22:49 inadyn [4856]: [401 | Authorization Failed]
Oct 25 15:22:49 Inadyn [4856]: Will Retry Again After 60 min ...

- DDNS cannot update its address - and not wise in the absence of the Internet.



Rep: (0)
Well, that's what preceded the disappearance of the Internet ... And the case is exactly in the router, since it works directly!

Jan 1 00:00:02 syslogd started: BusyBox v1.24.2
Jan 1 00:00:03 MI-R3G: Firmware Version: 3.4.3.9-099_E6F4533
Jan 1 00:00:03 Kernel: Klogd Started: BusyBox v1.24.2 (2018-10-06 02:46:23 +07)
Jan 1 00:00:03 Kernel: Linux Version 3.4.113 (Padavan @ HMS) (GCC Version 4.4.7 (GCC)) # 1 SMP Sat Oct 6 02:38:41 +07 2018
Jan 1 00:00:03 kernel: MediaTek SoC: MT7621A, RevID: 0103, RAM: DDR3, XTAL: 40MHz
Jan 1 00:00:03 kernel: CPU / OCP / SYS frequency: 880/220/220 MHz
Jan 1 00:00:03 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan 1 00:00:03 kernel: Determined physical RAM map:
Jan 1 00:00:03 kernel: memory: 10000000 @ 00000000 (usable)
Jan 1 00:00:03 kernel: Zone PFN ranges:
Jan 1 00:00:03 Kernel: Normal 0x00000000 ->0x00010000
Jan 1 00:00:03 kernel: Movable zone start PFN for each node
Jan 1 00:00:03 kernel: Early memory PFN ranges
Jan 1 00:00:03 kernel: 0: 0x00000000 ->0x00010000
Jan 1 00:00:03 kernel: On node 0 totalpages: 65536
Jan 1 00:00:03 kernel: free_area_init_node: node 0, pgdat 803785c0, node_mem_map 81000000
Jan 1 00:00:03 kernel: Normal zone: 512 pages used for memmap
Jan 1 00:00:03 kernel: Normal zone: 0 pages reserved
Jan 1 00:00:03 kernel: Normal zone: 65024 pages, LIFO batch: 15
Jan 1 00:00:03 kernel: Detected 3 available secondary CPU (s)
Jan 1 00:00:03 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan 1 00:00:03 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan 1 00:00:03 Kernel: Percpu: Embedded 7 Pages / CPU @ 81203000 S5952 R8192 D14528 U32768
Jan 1 00:00:03 Kernel: PCPU-alloc: S5952 R8192 D14528 U32768 ALLOC = 8 * 4096
Jan 1 00:00:03 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Jan 1 00:00:03 Kernel: Built 1 ZoneLists in Zone Order, Mobility Grouping on. Total Pages: 65024
Jan 1 00:00:03 Kernel: Kernel Command Line: Console = TTYS0,115200N8 root = / dev / mtdblock4 rootfstype = Squashfs
Jan 1 00:00:03 kernel: PID hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:03 kernel: Dentry cache hash table entries: 32768 (order: 5, 131,072 bytes)
Jan 1 00:00:03 kernel: Inode-cache hash table entries: 16384 (order: 4, 65,536 bytes)
Jan 1 00:00:03 Kernel: Writing Errctl Register = 0001181D
Jan 1 00:00:03 Kernel: Readback Errctl register = 0001181d
Jan 1 00:00:03 Kernel: Memory: 255872k / 262144k Available (3087K Kernel Code, 6272k Reserved, 463K Data, 220K Init, 0k Highmem)
Jan 1 00:00:03 kernel: Hierarchical RCU implementation.
Jan 1 00:00:03 kernel: NR_IRQS: 72
Jan 1 00:00:03 kernel: MIPS GIC RevID: 3.0
Jan 1 00:00:03 kernel: Setting up vectored interrupts
Jan 1 00:00:03 kernel: console [ttyS0] enabled
Jan 1 00:00:03 kernel: Calibrating delay loop ... 577.53 BogoMIPS (lpj = 1155072)
Jan 1 00:00:03 kernel: pid_max: default: 32768 minimum: 301
Jan 1 00:00:03 kernel: Mount-cache hash table entries: 512
Jan 1 00:00:03 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan 1 00:00:03 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan 1 00:00:03 kernel: Synchronize counters for CPU 1: done.
Jan 1 00:00:03 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan 1 00:00:03 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan 1 00:00:03 kernel: Synchronize counters for CPU 2: done.
Jan 1 00:00:03 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan 1 00:00:03 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan 1 00:00:03 kernel: Synchronize counters for CPU 3: done.
Jan 1 00:00:03 kernel: Brought up 4 CPUs
Jan 1 00:00:03 kernel: NET: Registered protocol family 16
Jan 1 00:00:03 kernel: FPU Affinity set after 4664 emulations
Jan 1 00:00:03 kernel: bio: create slab<bio-0>at 0
Jan 1 00:00:03 kernel: SCSI subsystem initialized
Jan 1 00:00:03 kernel: usbcore: registered new interface driver usbfs
Jan 1 00:00:03 kernel: usbcore: registered new interface driver hub
Jan 1 00:00:03 kernel: usbcore: registered new device driver usb
Jan 1 00:00:03 kernel: PCI host bridge to bus 0000: 00
Jan 1 00:00:03 kernel: pci_bus 0000: 00: root bus resource [mem 0x60000000-0x6fffffff]
Jan 1 00:00:03 kernel: pci_bus 0000: 00: root bus resource [io 0x1e160000-0x1e16ffff]
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: [0e8d: 0801] type 01 class 0x060400
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: supports D1
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: PME # supported from D0 D1 D3hot
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: [0e8d: 0801] type 01 class 0x060400
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: supports D1
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: PME # supported from D0 D1 D3hot
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan 1 00:00:03 kernel: pci 0000: 01: 00.0: [14c3: 7603] type 00 class 0x028000
Jan 1 00:00:03 kernel: pci 0000: 01: 00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Jan 1 00:00:03 kernel: pci 0000: 01: 00.0: PME # supported from D0 D3hot D3cold
Jan 1 00:00:03 kernel: pci 0000: 02: 00.0: [14c3: 7662] type 00 class 0x028000
Jan 1 00:00:03 kernel: pci 0000: 02: 00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Jan 1 00:00:03 kernel: pci 0000: 02: 00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Jan 1 00:00:03 kernel: pci 0000: 02: 00.0: PME # supported from D0 D3hot D3cold
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: BAR 0: can not assign mem (size 0x80000000)
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: BAR 0: can not assign mem (size 0x80000000)
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
Jan 1 00:00:03 kernel: pci 0000: 01: 00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: PCI bridge to [bus 01-01]
Jan 1 00:00:03 kernel: pci 0000: 00: 00.0: bridge window [mem 0x60000000-0x600fffff]
Jan 1 00:00:03 kernel: pci 0000: 02: 00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
Jan 1 00:00:03 kernel: pci 0000: 02: 00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: PCI bridge to [bus 02-02]
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: bridge window [mem 0x60100000-0x601fffff]
Jan 1 00:00:03 kernel: pci 0000: 00: 01.0: bridge window [mem 0x60200000-0x602fffff pref]
Jan 1 00:00:03 kernel: PCI: Enabling device 0000: 00: 00.0 (0000 -> 0002)
Jan 1 00:00:03 kernel: PCI: Enabling device 0000: 00: 01.0 (0000 -> 0002)
Jan 1 00:00:03 kernel: Switching to clocksource MIPS
Jan 1 00:00:03 kernel: NET: Registered protocol family 2
Jan 1 00:00:03 kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 00:00:03 kernel: TCP established hash table entries: 8192 (order: 4, 65,536 bytes)
Jan 1 00:00:03 kernel: TCP bind hash table entries: 8192 (order: 4, 65,536 bytes)
Jan 1 00:00:03 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Jan 1 00:00:03 kernel: TCP: reno registered
Jan 1 00:00:03 kernel: UDP hash table entries: 128 (order: 0, 4096 bytes)
Jan 1 00:00:03 kernel: NET: Registered protocol family 1
Jan 1 00:00:03 kernel: PCI: CLS 32 bytes, default 32
Jan 1 00:00:03 kernel: 4 CPUs re-calibrate udelay (lpj = 1,167,360)
Jan 1 00:00:03 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 00:00:03 kernel: msgmni has been set to 499
Jan 1 00:00:03 kernel: io scheduler noop registered (default)
Jan 1 00:00:03 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan 1 00:00:03 kernel: serial8250: ttyS0 at MMIO 0x1e000c00 (irq = 34) is a 16550A
Jan 1 00:00:03 Kernel: Ralink Gpio Driver Initialized. Number of GPIO: 64, GPIO MODE: 000A05AC
Jan 1 00:00:03 kernel: loop: module loaded
Jan 1 00:00:03 kernel: MediaTek NAND driver init, version v2.1
Jan 1 00:00:03 kernel: MTK NFI: NAND ID [C8 D1, 80 95 40 7F]
Jan 1 00:00:03 Kernel: MTK NFI: NAND CHIP WITH DEVICE ID C8D1 IS NOT FOUND IN MTK TABLE!
Jan 1 00:00:03 kernel: MTK NFI: try detect NAND chip from bootstrap mode (01)
Jan 1 00:00:03 kernel: NAND device: Manufacturer ID: 0xc8, Chip ID: 0xd1 (ESMT NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
Jan 1 00:00:03 kernel: Scanning device for bad blocks
Jan 1 00:00:03 kernel: MTK NFI: success load FACT_BBT from block 1023
Jan 1 00:00:03 Kernel: Creating 9 MTD Partitions on "MT7621-NAND":
Jan 1 00:00:03 Kernel: 0x000000000000-0x000000080000: "Bootloader"
Jan 1 00:00:03 Kernel: 0x000000080000-0x000000100000: "bootenv"
Jan 1 00:00:03 Kernel: 0x000000100000-0x000000600000: "Factory"
Jan 1 00:00:03 Kernel: 0x000000600000-0x000000740000: "Kernel"
Jan 1 00:00:03 Kernel: 0x000000740000-0x000001A00000: "Rootfs"
Jan 1 00:00:03 Kernel: 0x000001A00000-0X000001B00000: "Config"
Jan 1 00:00:03 Kernel: 0x000001b00000-0x000001F00000: "Storage"
Jan 1 00:00:03 Kernel: 0x000001F00000-0X000007F80000: "rwfs"
Jan 1 00:00:03 Kernel: 0x000000600000-0x000001A00000: "firmware_stub"
Jan 1 00:00:03 kernel: tun: Universal TUN / TAP device driver, 1.6
Jan 1 00:00:03 kernel: tun: (C) 1999-2004 Max Krasnyansky<[email protected]>
Jan 1 00:00:03 kernel: Ralink APSoC Ethernet Driver v3.2.4 (raeth)
Jan 1 00:00:03 kernel: raeth: PDMA RX ring 512, QDMA TX pool 1024. Max packet size 1536
Jan 1 00:00:03 kernel: raeth: NAPI & GRO support, weight 64
Jan 1 00:00:03 kernel: raeth: Byte Queue Limits (BQL) support
Jan 1 00:00:03 kernel: PPP generic driver version 2.4.2
Jan 1 00:00:03 kernel: PPP MPPE Compression module registered
Jan 1 00:00:03 kernel: NET: Registered protocol family 24
Jan 1 00:00:03 kernel: PPTP driver version 0.8.5
Jan 1 00:00:03 kernel: usbcore: registered new interface driver libusual
Jan 1 00:00:03 kernel: nf_conntrack version 0.5.0 (32,768 buckets, 32768 max)
Jan 1 00:00:03 kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:03 kernel: Bridge firewalling registered
Jan 1 00:00:03 kernel: gre: GRE over IPv4 demultiplexor driver
Jan 1 00:00:03 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:03 kernel: TCP: cubic registered
Jan 1 00:00:03 kernel: NET: Registered protocol family 10
Jan 1 00:00:03 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:03 kernel: IPv6 over IPv4 tunneling driver
Jan 1 00:00:03 kernel: NET: Registered protocol family 17
Jan 1 00:00:03 kernel: L2TP core driver, V2.0
Jan 1 00:00:03 kernel: PPPoL2TP kernel driver, V2.0
Jan 1 00:00:03 kernel: 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:03 kernel: ASUS NVRAM, v0.08. Available space: 131072. Integrity: OK
Jan 1 00:00:03 Kernel: VFS: Mounted root (Squashfs FileSystem) Readonly on Device 31: 4.
Jan 1 00:00:03 Kernel: Freeing Unused Kernel Memory: 220K Freed
Jan 1 00:00:03 kernel: Algorithmics / MIPS FPU Emulator v1.5
Jan 1 00:00:03 kernel: PCI: Enabling device 0000: 02: 00.0 (0000 -> 0002)
Jan 1 00:00:03 kernel: MT76x2 AP Driver version: 3.0.5.0
Jan 1 00:00:03 kernel: PCI: Enabling device 0000: 01: 00.0 (0000 -> 0002)
Jan 1 00:00:03 kernel: MT7603 AP Driver version: 4.1.0.0_pre
Jan 1 00:00:03 kernel: usbcore: registered new interface driver usblp
Jan 1 00:00:03 kernel: Initializing USB Mass Storage driver ...
Jan 1 00:00:03 kernel: usbcore: registered new interface driver usb-storage
Jan 1 00:00:03 kernel: USB Mass Storage support registered.
Jan 1 00:00:03 kernel: U2PHY P0 set SRCTRL calibration value: 3
Jan 1 00:00:03 kernel: U2PHY P1 set SRCTRL calibration value: 3
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: xHCI Host Controller
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: irq 30, io mem 0x1e1c0000
Jan 1 00:00:03 kernel: usb usb1: New USB device found, idVendor = 1d6b, idProduct = 0002
Jan 1 00:00:03 kernel: usb usb1: Product: xHCI Host Controller
Jan 1 00:00:03 kernel: usb usb1: Manufacturer: Linux 3.4.113 xhci-hcd
Jan 1 00:00:03 kernel: usb usb1: SerialNumber: xhci-hcd
Jan 1 00:00:03 kernel: xHCI xhci_add_endpoint called for root hub
Jan 1 00:00:03 kernel: xHCI xhci_check_bandwidth called for root hub
Jan 1 00:00:03 kernel: hub 1-0: 1.0: USB hub found
Jan 1 00:00:03 kernel: hub 1-0: 1.0: 2 ports detected
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: xHCI Host Controller
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:03 kernel: usb usb2: New USB device found, idVendor = 1d6b, idProduct = 0003
Jan 1 00:00:03 kernel: usb usb2: Product: xHCI Host Controller
Jan 1 00:00:03 kernel: usb usb2: Manufacturer: Linux 3.4.113 xhci-hcd
Jan 1 00:00:03 kernel: usb usb2: SerialNumber: xhci-hcd
Jan 1 00:00:03 kernel: xHCI xhci_add_endpoint called for root hub
Jan 1 00:00:03 kernel: xHCI xhci_check_bandwidth called for root hub
Jan 1 00:00:03 kernel: hub 2-0: 1.0: USB hub found
Jan 1 00:00:03 kernel: hub 2-0: 1.0: 1 port detected
Jan 1 00:00:03 Kernel: USB 2-1: New Superspeed USB Device Number 2 Using XHCI-HCD
Jan 1 00:00:03 Kernel: USB 2-1: New USB Device Found, IDVENDOR = 0951, IDPRODUCT = 1666
Jan 1 00:00:03 Kernel: USB 2-1: Product: Datatraveler 3.0
Jan 1 00:00:03 Kernel: USB 2-1: Manufacturer: Kingston
Jan 1 00:00:03 Kernel: USB 2-1: SerialNumber: 002618525EEE4E290D7444C4C
Jan 1 00:00:03 kernel: raeth: HW IP / TCP / UDP checksum RX / TX offload enabled
Jan 1 00:00:03 kernel: raeth: HW VLAN RX offload enabled
Jan 1 00:00:03 kernel: raeth: HW VLAN TX offload enabled
Jan 1 00:00:03 Kernel: SCSI0: USB-Storage 2-1: 1.0
Jan 1 00:00:03 kernel: raeth: HW Scatter / Gather TX offload enabled
Jan 1 00:00:03 kernel: raeth: HW TCP segmentation offload (TSO) enabled
Jan 1 00:00:03 kernel: mtk_esw - hw bridge: W | LLLL
Jan 1 00:00:03 kernel: mtk_esw - set broadcast storm control rate as: 10 mbps
Jan 1 00:00:03 kernel: device eth2 entered promiscuous mode
Jan 1 00:00:04 Kernel: MTK_ESW: Link Status Changed - Port Wan Link Up
Jan 1 00:00:04 Kernel: CH36 BSSID = EC: 43: F6: D9: AE: 8A
Jan 1 00:00:04 Kernel: CH44 BSSID = 0C: 80: 63: 5F: 57: B5
Jan 1 00:00:04 Kernel: CH48 BSSID = 98: DA: C4: 12: 1B: 88
Jan 1 00:00:04 kernel: ========================================= ============
Jan 1 00:00:04 Kernel: Channel 36: Dirty = 70, False CCA = 250, BUSY TIME = 0, SKIP CHANNEL = FALSE
Jan 1 00:00:04 Kernel: Channel 40: Dirty = 64, False CCA = 1163, BUSY TIME = 0, SKIP CHANNEL = FALSE
Jan 1 00:00:04 Kernel: Channel 44: Dirty = 102, False CCA = 302, BUSY TIME = 0, SKIP CHANNEL = FALSE
Jan 1 00:00:04 Kernel: Channel 48: Dirty = 102, False CCA = 192, BUSY TIME = 0, SKIP CHANNEL = FALSE
Jan 1 00:00:04 kernel: ========================================= ============
Jan 1 00:00:04 kernel: Rule 2 CCA value: Min False CCA value ==>SELECT CHANNEL 36, MIN FALSECCA = 2245
Jan 1 00:00:05 kernel: device rai0 entered promiscuous mode
Jan 1 00:00:06 Kernel: SCSI 0: 0: 0: Direct-Access Kingston Datatraveler 3.0 PMAP PQ: 0 ANSI: 6
Jan 1 00:00:06 Kernel: SD 0: 0: 0: 0: [SDA] 121208832 512-BYTE Logical Blocks: (62.0 GB / 57.7 GIB)
Jan 1 00:00:06 Kernel: SD 0: 0: 0: 0: [SDA] Write Protect IS OFF
Jan 1 00:00:06 Kernel: SD 0: 0: 0: 0: [SDA] Mode Sense: 45 00 00 00
Jan 1 00:00:06 Kernel: SD 0: 0: 0: 0: [SDA] Write Cache: Disabled, Read Cache: Enabled, Doesn't Support Dpo or Fua
Jan 1 00:00:06 Kernel: SD 0: 0: 0: Attached SCSI GENERIC SG0 TYPE 0
Jan 1 00:00:06 USB_MODESWITCH: No Rule for Device 0951: 1666
Jan 1 00:00:06 kernel: MT7603 Andes FW Version: ap_pcie
Jan 1 00:00:06 kernel: MT7603 Andes FW Build Date: 20160107100755
Jan 1 00:00:07 Kernel: SDA: SDA1
Jan 1 00:00:07 Kernel: SD 0: 0: 0: 0: [SDA] Attached SCSI Removable Disk
Jan 1 00:00:08 Kernel: Fat-FS (SDA1): UTF8 IS NOT A RECOMMENDED IO CHARSET FOR FAT FILESSYSTEMS, FILESYSTEM WILL BE CASE SENSITIVE!
Jan 1 00:00:09 Kernel: CH1 BSSID = 58: D5: 6E: A1: 98: B3
Jan 1 00:00:09 Kernel: CH1 BSSID = E4: 8D: 8C: A9: 72: 3F
Jan 1 00:00:09 Kernel: CH1 BSSID = 44: D9: E7: 60: B0: 57
Jan 1 00:00:09 Kernel: CH1 BSSID = 38: 2C: 4A: 45: D6: 20
Jan 1 00:00:09 Kernel: CH2 BSSID = 00: 0F: 02: 6A: 47: 78
Jan 1 00:00:09 Kernel: CH5 BSSID = BC: 96: 81: 5A: E8: 31
Jan 1 00:00:09 Kernel: CH5 BSSID = EC: 43: F6: 05: 67: 78
Jan 1 00:00:09 Kernel: CH5 BSSID = EC: 43: F6: D9: AE: 88
Jan 1 00:00:09 Kernel: CH5 BSSID = BC: 96: 82: 5A: E8: 31
Jan 1 00:00:09 Kernel: CH6 BSSID = 00: 0F: 02: 40: B7: 40
Jan 1 00:00:09 Kernel: CH8 BSSID = B0: BE: 76: 2C: 8F: 9E
Jan 1 00:00:09 Kernel: CH9 BSSID = 08: C6: B3: 30: 3D: 4C
Jan 1 00:00:09 Kernel: CH11 BSSID = 02: 0F: 02: 68: 8B: C0
Jan 1 00:00:09 Kernel: CH11 BSSID = 10: 62: EB: 8B: BF: AE
Jan 1 00:00:09 Kernel: CH11 BSSID = B8: 8D: 12: 67: 88: E5
Jan 1 00:00:09 Kernel: CH11 BSSID = C0: 4A: 00: FC: 5C: F1
Jan 1 00:00:09 Kernel: CH11 BSSID = 02: 0F: 02: 6D: 0D: B0
Jan 1 00:00:09 Kernel: CH13 BSSID = 6C: 72: 20: C7: A2: 74
Jan 1 00:00:09 Kernel: CH13 BSSID = 1C: 5F: 2B: E9: F0: DA
Jan 1 00:00:09 Kernel: CH13 BSSID = 58: D5: 6E: DC: 53: 6B
Jan 1 00:00:09 Kernel: CH13 BSSID = EC: ad: E0: 33: D9: 33
Jan 1 00:00:09 Kernel: CH13 BSSID = 90: 8D: 78: 0A: 4E: 18
Jan 1 00:00:09 Kernel: CH13 BSSID = 80: 26: 89: 57: FA: A8
Jan 1 00:00:09 Kernel: CH13 BSSID = 0C: B6: D2: 82: 90: 02
Jan 1 00:00:09 Kernel: CH13 BSSID = 10: 62: EB: 82: B0: FE
Jan 1 00:00:09 kernel: ========================================= ============
Jan 1 00:00:09 Kernel: Channel 1: Dirty = 436, False CCA = 0, Busy Time = 18385, Skip Channel = False
Jan 1 00:00:09 Kernel: Channel 2: Dirty = 332, False CCA = 0, Busy Time = 18951, Skip Channel = False
Jan 1 00:00:09 Kernel: Channel 3: Dirty = 300, False CCA = 0, BUSY TIME = 19380, SKIP CHANNEL = FALSE
Jan 1 00:00:09 Kernel: Channel 4: Dirty = 332, False CCA = 0, BUSY TIME = 19768, SKIP CHANNEL = FALSE
Jan 1 00:00:09 Kernel: Channel 5: Dirty = 540, False CCA = 0, BUSY TIME = 24923, SKIP CHANNEL = FALSE
Jan 1 00:00:09 Kernel: Channel 6: Dirty = 360, False CCA = 0, BUSY TIME = 22682, SKIP CHANNEL = FALSE
Jan 1 00:00:09 Kernel: Channel 7: Dirty = 364, False CCA = 0, Busy Time = 32468, Skip Channel = False
Jan 1 00:00:09 Kernel: Channel 8: Dirty = 428, False CCA = 0, BUSY TIME = 29106, SKIP CHANNEL = FALSE
Jan 1 00:00:09 Kernel: Channel 9: Dirty = 520, False CCA = 0, Busy Time = 27397, Skip Channel = False
Jan 1 00:00:09 Kernel: Channel 10: Dirty = 464, False CCA = 0, BUSY TIME = 24140, SKIP CHANNEL = FALSE
Jan 1 00:00:09 Kernel: Channel 11: Dirty = 700, False CCA = 0, BUSY TIME = 22515, SKIP CHANNEL = FALSE
Jan 1 00:00:09 Kernel: Channel 12: Dirty = 476, False CCA = 0, BUSY TIME = 20355, SKIP CHANNEL = TRUE
Jan 1 00:00:09 Kernel: Channel 13: Dirty = 798, False CCA = 0, BUSY TIME = 19076, SKIP CHANNEL = TRUE
Jan 1 00:00:09 kernel: ========================================= ============
Jan 1 00:00:09 kernel: Rule 1 CCA value: Min Dirtiness (Include extension channel) ==>Select Channel 2
Jan 1 00:00:09 Kernel: MIN Dirty = 2196
Jan 1 00:00:09 kernel: ExChannel = 0, 0
Jan 1 00:00:09 kernel: BW = 40
Jan 1 00:00:09 kernel: device ra0 entered promiscuous mode
Jan 1 00:00:10 kernel: br0: port 3 (ra0) entered forwarding state
Jan 1 00:00:10 kernel: br0: port 2 (rai0) entered forwarding state
Jan 1 00:00:10 kernel: br0: port 1 (eth2) entered forwarding state
Jan 1 00:00:10 kernel: mtk_esw - software IGMP / MLD snooping: 1
Jan 1 00:00:10 DNSmasq [539]: Started, Version 2.78 CacheSize 1536
Jan 1 00:00:10 dnsmasq [539]: Compile Time Options: IPv6 GNU-Getopt NO-RTC NO-DBUS NO-I18N NO-IDN DHCP DHCPV6 NO-LUA TFTP NO-CONNTRACK IPSET NO-AUTH NO-DNSSEC NO- LOOP-DETECT NO-INOTIFY
Jan 1 00:00:10 DNSMASQ-DHCP [539]: DHCP, IP Range 192.168.1.2 - 192.168.1.244, Lease Time 1D
Jan 1 00:00:10 DNSMASQ-DHCP [539]: DHCP, Sockets Bound Exclusively to Interface BR0
Jan 1 00:00:10 DNSMASQ [539]: Read / etc / hosts - 3 Addresses
Jan 1 00:00:10 DNSMASQ [539]: Read / etc / storage / dnsmasq / hosts - 0 Addresses
Jan 1 00:00:10 DNSMASQ-DHCP [539]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan 1 00:00:10 kernel: eth3: ===>VirtualIF_open
Jan 1 00:00:10 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
Jan 1 00:00:10 MI-R3G: Hardware NAT / Routing: Enabled, IPoE / PPPoE offload [WAN]<->[LAN / WLAN]
Jan 1 00:00:10 MI-R3G: Hardware NAT / Routing: IPv4 UDP flow offload - ON
Jan 1 00:00:10 MI-R3G: Hardware NAT / Routing: IPv6 routes offload - OFF
Jan 1 00:00:10 DHCP WAN Client: starting on eth3 ...
Jan 1 00:00:10 DHCP Wan Client: Bound (ETH3), IP: 10.168.102.178, GW: 10.168.96.1, Lease Time: 86400
Jan 1 00:00:10 MI-R3G: WAN UP (ETH3)
Jan 1 00:00:10 DNSMASQ [539]: Read / etc / hosts - 3 Addresses
Jan 1 00:00:10 DNSMASQ [539]: Read / etc / storage / dnsmasq / hosts - 0 Addresses
Jan 1 00:00:10 DNSMASQ-DHCP [539]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan 1 00:00:10 DNSMASQ [539]: Using NameServer 213.87.210.20 # 53
Jan 1 00:00:10 DNSMASQ [539]: Using NameServer 213.87.211.20 # 53
Jan 1 00:00:10 httpd [576]: Server Listening Port 80 (HTTP).
Jan 1 00:00:11 INADYN [589]: Inadyn Version 1.99.15 - Dynamic DNS Update Client.
Jan 1 00:00:12 kernel: br0: port 3 (ra0) entered forwarding state
Jan 1 00:00:12 kernel: br0: port 2 (rai0) entered forwarding state
Jan 1 00:00:12 kernel: br0: port 1 (eth2) entered forwarding state
Jan 1 00:00:32 Dropbear [605]: Running in Background
Jan 1 00:00:32 MiniUpNPD [607]: Version 2.0 Starting UPNP-IgD EXT If Eth3 Bootid = 1420070432
Jan 1 00:00:32 miniUpnpd [607]: http listening on port 60752
Jan 1 00:00:37 FTP Server: Daemon Is Started
Jan 1 00:00:38 Samba Server: Daemon Is Started
Jan 1 00:00:39 Kernel: RPC: REGISTERED NAMED UNIX Socket Transport Module.
Jan 1 00:00:39 Kernel: RPC: REGISTERED UDP Transport Module.
Jan 1 00:00:39 Kernel: RPC: REGISTERED TCP Transport Module.
Jan 1 00:00:39 Kernel: RPC: REGISTERED TCP NFSV4.1 BackChannel Transport Module.
Jan 1 00:00:39 Kernel: Installing Knfsd (Copyright (C) 1996 [email protected]).
Jan 1 00:00:39 Kernel: SVC: Failed to Register LockDV1 RPC Service (Errno 124).
Jan 1 00:00:39 rpc.mountd [684]: Version 1.2.3 Starting
Jan 1 00:00:39 NFS Server: Daemon Is Started
Jan 1 00:00:40 Media Server: Daemon Is Started
Jan 1 00:00:58 INADYN [589]: Resolving Hostname vv.asuscomm.com =>IP # 100.108.38.221
Jan 1 00:01:20 INADYN [589]: Checking for IP # Change, Connecting to Checkip.Dyndns.org (162.88.193.70:80)
Jan 1 00:01:29 NTP Client: Synchronizing Time to pool.ntp.org.
Jan 1 00:01:35 INADYN [589]: Failed Connecting to Remote Server: Connection Timed Out
Jan 1 00:01:35 INADYN [589]: Will Retry Again After 5 min ...
Jan 1 00:02:43 NTP Client: Synchronizing Time to Time.nist.gov.
Jan 1 00:03:14 NTP Client: Synchronizing Time to pool.ntp.org.
Jan 1 00:03:33 MI-R3G: Perform Wan Manual Reconnect
Jan 1 00:03:33 DHCP Wan Client: Deconfig (ETH3): Lease Is Lost
Jan 1 00:03:33 MI-R3G: Wan Down (ETH3)
Jan 1 00:03:33 NTP Client: Synchronizing Time to Time.nist.gov.
Jan 1 00:03:33 DNSMASQ [539]: Read / etc / hosts - 3 Addresses
Jan 1 00:03:33 DNSmasq [539]: Read / etc / storage / dnsmasq / hosts - 0 Addresses
Jan 1 00:03:33 DNSmasq-DHCP [539]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan 1 00:03:33 DNSmasq [539]: Using NameServer 8.8.8.8 # 53
Jan 1 00:03:33 Kernel: ETH3: ===>VirtualIF_close
Jan 1 00:03:33 Kernel: ETH3: ===>VirtualIF_open
Jan 1 00:03:33 Mi-R3G: Hardware Nat / Routing: Enabled, IPOE / PPPOE Offload [WAN]<->[LAN / WLAN]
Jan 1 00:03:33 MI-R3G: Hardware Nat / Routing: IPv4 UDP Flow Offload - ON
Jan 1 00:03:33 MI-R3G: Hardware Nat / Routing: IPv6 Routes Offload - OFF
Jan 1 00:03:33 DHCP Wan Client: Starting ON ETH3 ...
Jan 1 00:03:33 DHCP Wan Client: Bound (ETH3), IP: 10.168.102.178, GW: 10.168.96.1, Lease Time: 86400
Jan 1 00:03:33 MI-R3G: WAN UP (ETH3)
Jan 1 00:03:33 DNSMASQ [539]: Read / etc / hosts - 3 Addresses
Jan 1 00:03:33 DNSmasq [539]: Read / etc / storage / dnsmasq / hosts - 0 Addresses
Jan 1 00:03:33 DNSmasq-DHCP [539]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan 1 00:03:33 DNSmasq [539]: Using NameServer 213.87.210.20 # 53
Jan 1 00:03:33 DNSmasq [539]: Using NameServer 213.87.211.20 # 53
Jan 1 00:03:34 INADYN [804]: Inadyn Version 1.99.15 - Dynamic DNS Update Client.
Jan 1 00:03:49 inadyn [804]: Cached IP # 100.108.38.221 for vv.asuscomm.com from Previous Invocation.
Jan 1 00:03:49 Inadyn [804]: Last Update of VV.asuscomm.com On Thu Jan 1 00:00:58 2015
Jan 1 00:03:50 Inadyn [804]: Checking for IP # Change, Connecting to Checkip.Dyndns.org (131.186.113.70:80)
Jan 1 00:04:11 Inadyn [804]: Current Public IP # 109.174.115.194
Jan 1 00:04:11 Inadyn [804]: Update Needed for Alias ​​vv.asuscomm.com, New IP # 109.174.115.194
Jan 1 00:04:27 INADYN [804]: Sending IP # UPDATE TO DDNS Server, Connecting to NS1.asuscomm.com (103.10.4.108:80)
Jan 1 00:04:39 NTP Client: Synchronizing Time to pool.ntp.org.
Jan 1 00:04:42 INADYN [804]: Failed Connecting to Remote Server: Connection Timed Out
Jan 1 00:04:42 Inadyn [804]: Will Retry Again After 5 min ...
Jan 1 00:05:57 NTP Client: Synchronizing Time to Time.nist.gov.
Jan 1 00:07:41 NTP Client: Synchronizing Time to pool.ntp.org.
Jan 1 00:08:53 NTP Client: Synchronizing Time to Time.nist.gov.
Jan 1 00:09:42 Inadyn [804]: Checking for IP # Change, Connecting to Checkip.Dyndns.org (216.146.43.71:80)
Jan 1 00:09:57 INADYN [804]: Failed Connecting to Remote Server: Connection Timed Out
Jan 1 00:09:57 Inadyn [804]: Will Retry Again After 5 min ...


Full version    

Help     rules

Now: 12.01.21, 22:57