Power consumption (autonomy) OnePlus 3 / 3T | Energy talk, tips and cost saving solutions



Rep: (3210)
Power consumption (autonomy) OnePlus 3 / 3T

Oneplus 3 / 3T
Attached ImageA3000, A3003

Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Marriage пїЅ | Unofficial firmware пїЅ | Official firmware пїЅ | Modification and decorations пїЅ | Power consumption (autonomy) OnePlus 3 пїЅ | OnePlus 3 Owners Club пїЅ
Attention!

After switching to 8.0, many people have “Connection to the network” and it seems to many that this is high power consumption ... Although this is not so! In the subject there is evidence that energy consumption by 8.0, on the contrary, has become better. And the fact that the above display of statistics (most likely this is a feature of the new version of android, but not exactly ... Or maybe a bug ... Need to test).
And therefore I urge everyone to refrain from flooding on this topic!
If there are problems with power consumption, we first read the header, use the search, and finally, if we did not find anything, we write the post using the template from the header!
Thank you for understanding!


Important information
- It is recommended to readForum Rules.A if someone is hard to master the rules of the forum there10 commandments novice
- Instead of words"Thank!"useAttached Image. If you have less than 15 posts - click on the button.Attached Imageunder the message where they helped you, and write thanks.

- In this topic we discuss the power consumption of OnePlus 3 on different firmware and with a different set of installed programs,
-If problems arise with increased battery consumption, please indicate the firmware, the set of installed applications, and then there was (in your opinion) the problem. + Look under the spoiler "Ways to calculate the energy consumer" and follow the steps there and attach screenshots of the results. This will greatly simplify and speed up the work of those who will help you.
-Welcome reports on how you are seeking to increase battery life. It is strongly recommended to use the form from the spoiler "Form for laying out the results of battery operation". This saves the topic of unnecessary clarifications of several pages in length. Man will look and make conclusions for himself.
-Screens need to be cleaned under the spoiler! - How to clean images under a spoiler on a computer / laptop
- In the official client
- And also, in an informal clientsavagemessiahzine.com.
- And the video on YouTube
-Before publishing any post is highly recommended:

1.Decanally examine the cap (without neglecting any point).
2. Use search as describedhere.
And after that if you have any questions feel free to write a message.

-Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
Useful software
BetterBatteryStats Utility to monitor battery discharge when the phone is idle.
В® AdAway - about the benefits of ad blocking
Adguard- another ad blocker.
В® Disable Service - Enable and disable services.
Р’В® My Android Tools - Disable / enable activity, service, receiver, provider for any applications.
В® Greenify - Manage background processes.
Wakelock detector - Search for reasons for not falling asleep device. And this is without root video how to install wacelock detector lite without root
GSam Battery Monitor - Utility for monitoring energy consumption.
Ways to Calculate Energy Consumer
Please, before writing here with your problem, follow the steps below.
1. Lay out screenshots (under the spoiler) Settings - Battery. Also detailed schedule from there too.
2. Put the Wakelock Detector (links under the spoiler Useful programs) and find out which system process is eating (Also post screenshots)
3. Go to the For developers section and look at the process statistics (how to open the developer section: go to settings - about the phone, and click on the "Build number" 7 times, then go to the settings and find this item.

If you sit down very fast body..(A good example of the design of the post)
Assistance in the diagnosis of high power consumption
Tips to improve power consumption
Form for putting the results of the battery
Please use this form when making posts

1. Model. Firmware (name and version), as well as Gapps (if installed).
2. Kernel (name and version)
3 Network type (2G \ 3G \ 4G (LTE) or auto. Reception quality?
4. If WiFi, bluetooth, NFC was used, indicate this, and you should also indicate the reception quality and operation time.
5. What system software is removed / disabled:
6. Launcher, the presence of widgets:
7. List all the modified kernel settings, you can use the screenshots:
8. Screen brightness: the ratio of% brightness and brightness time \ auto brightness (with a custom auto brightness, it is desirable to have a screenshot).
9. Screen operation, General phone operation
10. Voice calls:
11.% left
12. Sync and backup data:
13. What programs reduced power consumption? (including autostart limiters, taskkilers, network mode management, antiviruses, ad blockers) If you used something similar from the built-in firmware functionality.
14. Indicate how much time you are already using the device or if the battery was changed, then indicate how much time has passed after the replacement.
15. Describe what they did during the measurements (in free form).
16. Screenshots

Illustrative example

The results of the battery
Problem solving
miscellanea
Polls archive
Attached Image

Attached Image



Frequently asked Questions

Dear colleagues, if you have problems with power consumption or you just want to share your experience, do it as indicated in the header. To the rest of the users was at least something clear.
Non-informative posts will be regarded as a violation of the rules and deleted without warning. Thank you for your understanding!

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.
User activity

Post has been edited4Serg13 - 15.01.20, 23:22
Reason for editing: Acquired Accum "lehehe" Ali



Rep: (13)
Guys, who will help, it takes 8% per night, of course, there is no Wi-Fi, an Internet mob, just a phone without movement can be said.
Put the WLD, launcher 1+ eats most, power management eats more in the core.
I did not include any energy saving
P.S. please 3.2.2

Post has been editedbesson018 - 16.08.16, 07:19



Rep: (23)
Did anyone have the opportunity to compare the firmware (both official and unofficial) on the subject of autonomy? Does OP3Lite really rule?



Rep: (8)
Autonomy pleases. 2g network
Attached Image
Attached Image
Attached Image
Picture


Post has been editedferhad.necef - 28.08.16, 20:40
Reason for editing: In the header



Rep: (125)
* imusorka,
I compared several firmware (purely for myself) in terms of autonomy.

Stock: all day, 5 hours of screen
RR: a little less than a day, 3.5 hours of screen
FreedomOS: similar to drain
CyanogenMod: all day, 6 hours of screen
OP3Lite: not yet tested

Posted 08/17/2016, 00:10:

* HULK3,
I see a very good battery life, the smartphone is really asleep :)

Posted 08/17/2016, 00:12:

* yumkaa
Can you do a calibration?

Fully charge and discharge the device a couple of times, 2-3 times are enough and check the result.

Yes, and the connection is bad, the processor is strained so as not to lose the connection, hence the battery.



Rep: (133)
Yes, and the connection is bad, the processor is strained so as not to lose the connection, hence the battery.

The processor has nothing to do with it. Operator BS controls the transmitter power of the phone. When the level is good - the phone emits with low output power, with a bad signal the power increases.



Rep: (37)
An interesting situation: when charging the body at home with a stock dash chadj, I wrote a fast charge and how much time is left until the end of charging.

I do the same thing at work on the same charger (I take it to work with me in the morning), I write just fast charging, without a trace of time. Sockets changed, the blessing at work of their pieces 30 in an office (I tried a couple of usual and red sockets with stabilization and protection), measured with a multimeter - consistently 220 in all sockets where bullet, without jumps.

The question is, why, wtf?)) Has anyone encountered this?
The firmware is a cyan from an arter with its own core.

Post has been editedint100nils - 18.08.16, 23:03



Rep: (206)
* int100nils, I everywhere where I do not charge writes fast charging.



Rep: (84)
* int100nils The time he counts gradually, does not immediately show it after putting on charge.



Rep: (37)
* imolmixa
The fact is that at work he does not show at all. At home within a minute, two just starting to show.



Rep: (84)
* int100nils Well, this is definitely not due to the fact that the outlet is different)



Rep: (125)
* int100nils,
And checked for hydroxy? I did not show dash charging, when I charged through an extension cord, but everything was ok



Rep: (1975)
* oleg-177,
From morning to evening in the mode of active use. This is more than enough.
And if you need a day for 2, then you need some highscreen then.
With the battery, everything is good with it, and with time, the autonomy is tightened, as was the case with 1 + 1.
I have a Meizu Pro5 with a 3050 battery, so for dinner it is asking for charging already.



Rep: (16)
He is lying idle, and the battery is dying. I put a Wakelock Detector prog - I'll watch. RESURRECTION REMIX M [BlackjubelRR] [CM13] firmware can it!?
Attached Image

Attached Image

Attached Image

Attached Image


Post has been editedoleg-177 - 21.08.16, 07:40



Rep: (84)
At 8:00, he took off the charge, all day on the Internet and another 15% is: rofl:
Attached Image


Post has been editedimolmixa - 21.08.16, 21:20



Rep: (658)
And now I have ...
Attached Image




Rep: (16)
ferhad.necef @ 08.21.2016, 18:16*
On the last screen you can see that something will be the phone although the screen does not work ..

Turned off the screen when notifying and with double tapu. Can it wake up?



Rep: (3210)
* oleg-177, in the morning see what Wakelock Detector shows



Rep: (0)
Good afternoon, maybe I still go over a stick, but still it seems to me that the DASH CHARGE technology reduces the battery life due to the high amperage. Is it possible to somehow disable the function without buying other cables, etc., and if you need to turn it on (with software or something else)?

Post has been editedTonbl4 - 23.08.16, 11:29



Rep: (3210)
Tonbl4 @ 08/23/16, 10:58*
Is it possible to somehow disable the function without buying other cables, etc., and if you need to turn it on (with software or something else)?
not yet..



Rep: (1975)
* Tonbl4,
What is the basis of your observation that the battery is being killed?


Full version    

Help     rules

Now: 01/29/21, 07:48