K1 Plus DVB-S2 / T2 [Android] | [TV Box] [DVB-S2 / T2] [AMLogic S905]
DVB-S2 / T2 TV Box on Amlogic S905
under the messages to which you want to add links.Friends! Who does this apparatus work from TV large diagonals, recent years of release? What is the quality of the satellite channels in comparison with the source with a flash drive or IP channels? I bought 43 inch LG 4K 16 years old, but I don't like the picture from my Cloud IBox 2, while the picture is better, although there is a bit rate somewhere even worse.
Previously, 32 inches Toshiba did not see the difference.
Someone in the branch wrote that the picture quality of K1, K2 is comparable to 800 dirims?
Does it make sense to replace CLOUD IBOX 2?
Post has been editedcursor.kz. - 31.10.16, 20:22
Previously, 32 inches Toshiba did not see the difference.
Someone in the branch wrote that the picture quality of K1, K2 is comparable to 800 dirims?
Does it make sense to replace CLOUD IBOX 2?
Post has been editedcursor.kz. - 31.10.16, 20:22
Reason for editing: updated
cursoru.kzg, Only for the sake of the picture is not. CLOUD IBOX 2 on BCM7358, issues a normal picture, like all the broths. Imiji changed? Telek calibrated?
But for the sake of obtaining additional chips - it is worth. With BCM7358 media player no.
dm_mih Well, if only for additional chips, it is not sure if it is necessary. I am delighted with WebOS 3 on LG in speed, and an unofficial software can even be launched.
The image did not touch. After calibration, it seems to be better, the truth is still no white balance.
cursoru.kzg, 43 This is a notic .. It happens at 70 inches the picture is normal, but it happens on 32 sucks .. from processors depends on, matrix .. I have a samsung 55 inches C9000 model .. on Azbox a picture very much liked and on the CD, At this receiver, the picture is different on my telek, and on the bottom of the pixel and lubricates in fast scenes, but it does not say about the stabilization of iron, and more about incorrect drivers and firmware settings .. Iron quite worthy takes almost any HD without jerks! Post has been editedvnov - 31.10.16, 20:44
drove config in neutrino
Channels have not opened
Maybe where else to activate it
Updated 09/12/2016
Post has been editeddm_mih - 31.10.16, 21:43
Channels have not opened
Maybe where else to activate it
Updated 09/12/2016
[Global]
log_udp = 192.168.1.2 # where 192.168.1.2 - the IP of the computer on which you will watch log
LOG_RB_SIZE = 100.
syslog = 1
debug = 3
Daemon = 1.
[Webif]
port = 8888.
debug = 3
[Dvb]
# Type = Stapi # Rassat for Fortis
Filter = DVB.
debug = 1
SDT = 1.
[Filter]
name = dvb
rule = caid = 2600,0100,1803,0b00,0b02,0baa, 090d, 093e, 09cd, 0b0f; Accept
rule = caid = 0500; Ident = 040620,060A00,032500,040810,041700,042300,042800,043800,024700; accept
Rule = Caid = 098C; Ident = 000000; Accept
Rule = Caid = 1880; Ident = 002011.002111.000000; Accept
Rule = Caid = 1843; Ident = 003411.008011.000000; Accept
Rule = Caid = 1803; Ident = 007001.007101.000000; Accept
Rule = Caid = 4ae0; Ident = 15; Accept # 3K
Rule = Caid = 4ae1; Ident = 14; Accept # 3K Sibir
rule = reject
[Reader]
name = 1cent
type = newcamd525
Account = "" "" "" ": в„–в„–в„–в„–@190.115.26.22
Multiport = 3999,4000,4002,4005,4007,4008,4009,4011,4013,4014,4017,4019,4022.
debug = 3
reconnect_delay = 10
EMM_CACHE = 1.
ECM_TTL = 5000.
[Reader]
active = 1
ASYNC_MODE = 1.
name = BISS.
type = emubiss
file = /var/keys/SoftCam.Key
Filter = DVB.
debug = 1
log_udp = 192.168.1.2 # where 192.168.1.2 - the IP of the computer on which you will watch log
LOG_RB_SIZE = 100.
syslog = 1
debug = 3
Daemon = 1.
[Webif]
port = 8888.
debug = 3
[Dvb]
# Type = Stapi # Rassat for Fortis
Filter = DVB.
debug = 1
SDT = 1.
[Filter]
name = dvb
rule = caid = 2600,0100,1803,0b00,0b02,0baa, 090d, 093e, 09cd, 0b0f; Accept
rule = caid = 0500; Ident = 040620,060A00,032500,040810,041700,042300,042800,043800,024700; accept
Rule = Caid = 098C; Ident = 000000; Accept
Rule = Caid = 1880; Ident = 002011.002111.000000; Accept
Rule = Caid = 1843; Ident = 003411.008011.000000; Accept
Rule = Caid = 1803; Ident = 007001.007101.000000; Accept
Rule = Caid = 4ae0; Ident = 15; Accept # 3K
Rule = Caid = 4ae1; Ident = 14; Accept # 3K Sibir
rule = reject
[Reader]
name = 1cent
type = newcamd525
Account = "" "" "" ": в„–в„–в„–в„–@190.115.26.22
Multiport = 3999,4000,4002,4005,4007,4008,4009,4011,4013,4014,4017,4019,4022.
debug = 3
reconnect_delay = 10
EMM_CACHE = 1.
ECM_TTL = 5000.
[Reader]
active = 1
ASYNC_MODE = 1.
name = BISS.
type = emubiss
file = /var/keys/SoftCam.Key
Filter = DVB.
debug = 1
Post has been editeddm_mih - 31.10.16, 21:43
Friends share experience.
Put on the SD card 4GB Class 10 Transcend Firmware Alexelec 6.95.2.1
I demolished the server and client VDR (I could not configure something, the channels did not see each other).
Put the HTS TVHeadend server v4.0.9 ~ OpenElec TVH-Addon v7.0.3 + client PVR 2.2.14. with repa alexelec
Work is stable.
But there is one bug.
When switching channels, almost immediately starts to drop and skip frames. Press the stop, restart the channel again - everything is perfect. Such a feeling that lacks the battle RAM.
And it is almost on all channels.
After some time (5-7 minutes) again starts dropping. The same picture when watching movies over the network.
Moreover, the first section of the card is employed 120/512 MB (23%), the second section 56/3100 (2%)
All four CPU are busy no more than 20-30%
Hardware acceleration included
CPU TEMP 69 degrees
Free memory 465 MB
By the way, the radio is also stuck.
Does anyone have ideas what is the case and how can I fighter?
Post has been editedzonder33 - 01.11.16, 02:09
Put on the SD card 4GB Class 10 Transcend Firmware Alexelec 6.95.2.1
I demolished the server and client VDR (I could not configure something, the channels did not see each other).
Put the HTS TVHeadend server v4.0.9 ~ OpenElec TVH-Addon v7.0.3 + client PVR 2.2.14. with repa alexelec
Work is stable.
But there is one bug.
When switching channels, almost immediately starts to drop and skip frames. Press the stop, restart the channel again - everything is perfect. Such a feeling that lacks the battle RAM.
And it is almost on all channels.
After some time (5-7 minutes) again starts dropping. The same picture when watching movies over the network.
Moreover, the first section of the card is employed 120/512 MB (23%), the second section 56/3100 (2%)
All four CPU are busy no more than 20-30%
Hardware acceleration included
CPU TEMP 69 degrees
Free memory 465 MB
By the way, the radio is also stuck.
Does anyone have ideas what is the case and how can I fighter?
Post has been editedzonder33 - 01.11.16, 02:09
zonder33 Try to install LIBREELEC from this topic in the OpenElec place. https: //forum.libercele...st-16258.html#pid16258.
I have everything well on LIBREELEC.
Post has been editedA1eKS @ ndR - 01.11.16, 13:40
I have everything well on LIBREELEC.
Post has been editedA1eKS @ ndR - 01.11.16, 13:40
A1eKS @ ndR, Tell me, at Libre Elec another structure, it also loads with an SD card or is sewn directly to NAND?
What is the procedure?
By the way, the drops that appear during the long-lasting channel I removed, turning off the hardware acceleration.
Drops when switching unfortunately remained.
thank.
zonder33, With TVHeadend there is such a problem, even on libreelec. VDR is better .. under LIBREELEC set .. in the header there is an instruction as the built-in channel scanner change to a familiar to many and quite worker chanelscan! There everything is scanned and shows .. K1 Plus DVB-S2 / T2 [Android] (Post kmz7 # 51626429) Post has been editedvnov - 01.11.16, 16:35
I did not understand
On the neutrino, the channel editor does not work on the grid
I tried different but writes about the wrong password
On the neutrino, the channel editor does not work on the grid
I tried different but writes about the wrong password
Vitaliy_S, Vitaly, but tell me if you can do on your firmware so that it loads not with an SD card and with USB flash drives? And where can it be twisted? And then I have only one inhibited memory card, and the flash drives a whole mountain. It would be more convenient to test different firmware from them.
Thanks for the help.
zonder33 @ 11/01/2016, 18:45
Is it possible on your firmware to make it loaded not with an SD card and with USB flash drives? And where can it be twisted?
you can, aml_autoscript needed another, no time to do, for example, you can lookhttps://github.com/150.../s905_libreelec_v4_usb.
Post has been editedVitaliy_S - 01.11.16, 18:53
zonder33 Libreelec can be installed on the SD card and in NAND, to put on the SD card you need to do the following. Download the image of LIBREELEC, then download libreelec.usb-sd.creator.win32. Insert the SD card into the card reader, open using libreelec.usb-sd.creator.win32 image and write on the SD card, after which the standard procedure, insert the SD card on the receiver on, clamp the reset button and insert the power, wait 5 seconds and release the reset. , all.
Libreelec.usb-sd.creator.win32.zip.(6.22 MB)
Post has been editedA1eKS @ ndR - 01.11.16, 20:27
Attached files
Libreelec.usb-sd.creator.win32.zip.(6.22 MB)Post has been editedA1eKS @ ndR - 01.11.16, 20:27
A1eKS @ ndR, Thank.
Another question, in the program, what version to choose?
UPD: I understand.
Post has been editedzonder33 - 01.11.16, 20:42
Guys, help with the advice: need a media player for IPTV and for viewing T2, plus it is possible to internet (youTuba mainly). The wife will use T2, I, with rare minutes of access to the TV --- Internet.
Stopped on two models: Kii Pro DVB-S2 / T2 and Ki Plus DVB-S2 / T2.
What is the difference in characteristics I understand.
I am interested in the opinion of users: Is the difference between Kii Pro DVB-S2 / T2 and Ki Plus DVB-S2 / T2, if I use them in the method described above? How does T2 work on these bailiffs (I live in Ukraine)?
Thank you for the answers.
Stopped on two models: Kii Pro DVB-S2 / T2 and Ki Plus DVB-S2 / T2.
What is the difference in characteristics I understand.
I am interested in the opinion of users: Is the difference between Kii Pro DVB-S2 / T2 and Ki Plus DVB-S2 / T2, if I use them in the method described above? How does T2 work on these bailiffs (I live in Ukraine)?
Thank you for the answers.
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement