Vitaliy_S, ,
Malaysk, Matured next question. Is it possible in your firmware to make it some of the satellite was put to the resolution
1080i 50hz, and KODI 1080p 24hz.
If KODI not to put this resolution, on the high-quality recording will be visible micro podlagivaniya pictures every few seconds,
since the whole blu-ray material originally created in 24hz.
We have to change the resolution in the android on the need in the options every time
kodi prior to use as a media player or to the use of satellite softiny.
Or maybe already available some way more convenient?
_sm0ke_, If the screw change the aspect ratio to drain the firmware in the satellite and DVB-T2 part,
prices you will not!
You did not use the firmware from Vitali?
There Neutrino if you press the lowest key on the remote,
well you can see how it works.
The fact that Neutrino seems to be able to define itself in any aspect ratio
broadcasted currently selected channel.
E.g. turn on HD Neutrino channel and shows that the channel is broadcast in the 16: 9.
The channels that are broadcast in 4: 3 Neutrino also recognize the bottom that is 4: 3.
Hence convenient feature is built into the Neutrino, which allows for example only
channel 4: 3 to display them without stretching the entire screen proportioning, stretch and so forth.
And the other 16: 9 channels automatic display without changes to full screen.
If I where that is not right, experts corrected.
In advance
to all thank!
Post has been editeddizzydevil - 30.07.16, 15:37