MK888 / K-R42 / CS918 / MK908 / T428 / Ugoos UG300 / IRU R9 - Firmware | [TV Box] [Rockchip RK3188]



Rep: (352)
FirmwareMK888 / K-R42 / CS918 / MK908 / T428 / Ugoos UG300 / IRU R9
PictureTV Box on Rockchip RK3188 chip
Discussion пїЅ | Firmware пїЅ | Discussion CS918a RC3229
  • To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.


Driver and Utilities
Official firmware
Unofficial firmware
Custom firmware update_Q7_ZhongXing_20151026 + mirror update_Q7_ZhongXing_20151026
rk31_cs918_8723_150121_4.4_8g2g_v7.0
cyxtech_rk31_cs918_8723_150204_4.4_8g1g_v7.0
Q7 EKB311B rk3188 RLT8723BU RTL8188 4.4.2 MOD REPARTITION
Firmware from maximry
Firmware from M.I.G.
Firmware from lewy20041
Firmware from wasser
Firmware from Pro100-Winston
Firmwares from eliteforce for B351_V3.2
Firmware from CreaturePH for CYX_CS918-V2_1 and V2_3 boards
Firmware for card CYX_CS918-V2_3 was found and verified by user edvard69, author unknown
Firmware for RK3188_BOX_v2.0 is found and verified by user amd797, author unknown
Firmware for Q7 and CS918 from Chinese friends "
ROOT
Instructions
A program to reassign hardware buttons
remembering screen scale settings
Cursor replacement
How to start the game so that the cache (obb) is in external sd or usb_disco
Virtual gamepad via RKremoteControl
How to get the kernel from the firmware
Those who wish to sew the core without the help of a computer
The method of replacing the internal memory on the sd card + here
About recovery
Report on CYX_CS918 V2_3 20140510
K-R42 version without bluetooth, T-R42 with bluetooth. Due to the large number of devices with different revisions of the boards and the installed memory modules, the firmware can behave differently.
Solving the screen flicker problem CYX_CS918 V2_3 20140510
Installing drivers (for example Win7x64)
Solving the problem with dynamic MAC
Restoration of "brick" + way to install the firmware on the sd card without affecting the internal memory
Detailed instructions for the restoration of "brick"
If the prefix does not turn on
Return from 4.4.2 to 4.2.2
Creating a backup (backup)
How to flash a separate core
You need to flash the kernel separately with the prog ROM_Flash_Tool_137
Rename the required kernel into kernel.img and drop it into the FinlessROM folder, run the ROM_Flash_Tool_137.exe file, remove all the checkboxes except kernel, connect the prefixto the computer in firmware modeAnd press the Flash ROM button to wait for the end of the firmware. The different kernels for our device are downloadinghere
Backup stock firmware
Firmware
Firmware via RKAndroidTool
- Turn off the box,
-run RKAndroidTool
-Connect via OTG to computer
- click the recovery button on the box below
-plug the power, after ~ 5 seconds you release the recovery button
-the box is recognized by the computer, you put the driver on it (included), if the driver already exists, you skip the item
We work only with the first tab, the rest I have not used.
-As soon as the drivers are installed, in the RKAndroidTool program, instead of no found RKAndroid ... Found RKAndroid is written .......
-If after installing the drivers and connecting, the program writes no found RKAndroid ....... you need to re-connect the device.
-In the program, click Erase NAND (device formatting)
-After all is successful, you press Flash Rom or RUN (depending on the version), the device should reboot and recording of the new firmware will start (at the same time reboot will be written on the side, and then digits will run)
Firmware via RKBatchTool
- Turn off the box,
-run RKBatchTool.exe
-Connect via OTG to computer
- click the recovery button on the box below
-plug the power, after ~ 5 seconds you release the recovery button
-the box is recognized by the computer, you put the driver on it (included)
- As soon as the drivers are installed, the green button number 1 in the RKBatchTool program will light up.
-If after installing the drivers, the button в„–1 did not light up, you need to re-connect the device.
-In the program, press the upper right button and specify the path to the firmware
-After the firmware file is selected, we press the RESTORE button in the program
-We wait, after the inscription in green, you can turn it off, the firmware has been produced)
RKBatch Tool v1.7.1.1 + installer for Rockchip and ADB drivers
.
A photo
Link to freektab with photos and firmware versions
K-R42 without BT
TN-BX09_V2.1-1331
Attached Image

TN-BX09_V2.1-1340
Attached Image
B351_V2.0_2013-09-22
Attached Image
T-R42 with BT
XT-Q7-V01
Attached Image
XT-Q7-V10
Attached Image
Attached Image
RK3188_BOX_SZY_X6 V1_0 131024-AP6210
Attached Image
RK3188_BOX_SZY_X6 V1_0 131024-Mediatek
Attached Image
B351_V1.0-1333
Attached Image
B351_V1.1-1338
Attached Image
B351_v2.0 2013-09-22-BT
Attached Image
B351_V3.2
Attached Image
LS_X6_V12
Attached Image
HLSX_X6_V10
Attached Image
CYX_CS918-V2_1-20140325
Attached Image
CYX_CS918-V2_3-20140510
Attached Image
CYX_CS918-V2_6-20140929
Attached Image
K-RK3188-V3.5
Attached Image
K-RK3188-V4.2
Attached Image
K-RK3188-V4.3
Attached Image
MK918 HM E237212 94V0
Attached Image
CS918 V7_0
Attached Image
Attached Image
HLSX-CS918 v1.1
TWRP and Difference Recovery Modes
ALL !!! ALL !!! ALL !!! In connection with the frequent cases of the same stupid questions !!! There are about 2 dozens of boards of this console, so before looking for the firmware and asking the same questions, you must DISASSEMBLE the console, without determining the version of the board, it is IMPOSSIBLE to search the firmware! How to disassemble the console here -MK888 / K-R42 / CS918 / MK908 / T428 - Firmware (Post # 33713688)
New information for everyone. Prefixes on Amlogic S805 - CS918G Plus processors are not discussed here. CS918-221 on RK3229 chips are NOT discussed here either! In connection with the regular cases of appeals of people who bought consoles on new RK3128 processors, these processors are installed on boards with a diamond, and not a square, like RK3188 (-T), here are links to topics about your consoles, do not litter here -CS918 - Discussion , Transpeed MK809V / CX939 - Discussion , Help with chip detection, RK3188 or RK3128
If the Wind "go to"

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).


Post has been editedmihadom - 10.01.20, 14:47
Reason for editing: custom bikes for V6_6



Rep: (0)
ABC8 @ 12/06/2013, 08:47*
Gentlemen, and is there any real way to force this (and to her related) console to work in 1080r?

The only option that really works in Full HD confirmation naturally in Antunu, I describedhere.
Unfortunately, Lewy threw work on the firmware, and Wasser finites the kernel under his firmware, but there is no resolution 1080, although the kernel calls so.



Rep: (21)
Tell me. Located 1. T-R42-WASSER-1.2.3. I like everything but no rkgamecontrol where to take it and how to install it?



Rep: (5)
ABC8 @ 12/06/2013, 08:47*
Gentlemen, and is there any real way to force this (and to her related) console to work in 1080r? Only that not to the eyes seemed to, but for the real - let's say, the An-Tu-Tu showed (or other programs) that the resolution of 1920x1080. Nor the stock, no praised Wasser can. Of course, the TV itself is all full.


Good day. Yesterday I experimented all day with firmware. Objective: To achieve real 1080p + viewing by means of MX player Fullshd video online with EX.UA and FS Video Box without friezes and freezes. Firmware (beta version) 2.0.4 with the kernel as described in the topic did not get up, 1.2.3 Nor Old nor New did not give the desired result + friezes, rolling, periodic dropping of the HDMI signal. Good result gave firmware described in Landers7 posthttp: //savagemessiahzine.com/Forum/index.php?showtopic=490384&st=640#Entry26596461. Everything works smartly! There is a nuance, there is no shutdown button at all =) Solution: Installation add. Programs (there is in the description) or, it suits me, simply by pressing the physical button on the device itself I send to sleep =) inclusion in the same way. 17 Gig Rip 1080r Online passed without a single plug. Put Seeder (opinions about his safety a lot different), I watch online 3D almost without torskimonovo



Rep: (18)
Palachmb @ 12.12.2013, 11:02*
I tried to flash on your device Wasser 1.2.2 - got a cyclic reboot when you turn on WiFi, as someone has several pages above. Spat and rolled into stock.
By the way, did anyone trial to change the internal memory and the card?

This is what you apparently. I was stitched at 1.2.3 and pleased everyone, I will have a reference to you at home



Rep: (26)
Guys and tell me which I ask me to pour
B351_V1.1.

For stock shuffle. There is no bluetooth. Need Lan.

Attached images
Attached Image



Rep: (0)
Interestingly, 1680x1050 permissions can not be achieved here? (I have on the monitor only with this resolution picture on the whole screen, without a black frame)



Rep: (352)
Delfiniys @ 06.12.2013, 18:49*
For stock shuffle. There is no bluetooth. Need Lan.

And who told you that there is no bluetooth? You have just version with bluetooth. On the right in the center shows the Wi-Fi + BT chip - AP6210. And the version of the board says about the same. You pour vasser for T-R42.
If you had a version without bluetooth, then instead of the AR6210 would be an empty place, and the Wi-Fi module on the Rialtech would be the left below the card reader.

Post has been editedmaximry - 07.12.13, 00:33



Rep: (30)
_andrey75_,
7OH,
This instruction for the rootMK888 / K-R42 / CS918 / MK908 / T428 - Firmwareand just below.
She is completely for idiots.
Nothing is not clear. Especially how to install the driver. I do everything on items. I have Windows 7 x64.
Validation checks off.
How reaches the installation of drivers, Windows Bulkets (reports that the box is connected) and on this deaf. In the folders, the sys file that cannot be installed not as. Windows does not recognize it.
If you go to the Device Manager and try to update the driver and specify the folder where they lie, they write to me that there are no drivers there.
The hopelessness is harsh.
If you are going to write instructions write with pictures and cut-down snot and saliva. To even the most nichelial user put a root.

Post has been editedAleksandr34 - 07.12.13, 00:48



Rep: (324)
The sys dibile file starts via the device display, if a new device is recognized, the device's dispatch is not always the same, if not recognized, you connect to another USB with the button cuts as in the first case, see the device dispatches. If not, then the new start and try again. if something does not work, and others turn out, it means somewhere a mistake



Rep: (38)
Aleksandr34 @ 06.12.2013, 23:48*
If you are going to write instructions write with pictures and cut-down snot and saliva.

Well, write with pictures. I put myself a root, all about everything, together with the study of the material, I left no more than half an hour, so I wrote, maybe someone comes in handy. And you are also with the claims.
... here forum, andNo one anything Not obliged, including instructions with pictures.



Rep: (60)
Specialist from Sztena Sapporto Who rises for these devices, gave the address of the Chela to which he advised to handle all comments on FW. Address [email protected].



Rep: (9)
Wasser has released a new firmware:K-R42 Wasser Firmware Based on Android 4.4 Kikat



Rep: (3)
gudvin_new,
Tell me, did the kernel changed? If yes - what?



Rep: (5)
Attached filekernel.img(4.54 MB)

Archy82 @ 07.12.2013, 11:02*
Tell me, did the kernel changed? If yes - what?

Yes, from the assembly of Wasser



Rep: (30)
dedlew,
Dedlew @ 07.12.2013, 05:09*
The sys dibile file starts via the device display, if a new device is recognized, the device's dispatch is not always the same, if not recognized, you connect to another USB with the button cuts as in the first case, see the device dispatches. If not, then the new start and try again. if something does not work, and others turn out, it means somewhere a mistake

You would have better told how to install this driver so that I do not guess.
The device is recognized normally, I see it in the device manager (the model of my device is written), but writes no drivers on it.
When you try to update the drivers, it is upgrading (as it's not where there is no driver installation) I have to refresh and specify the path where the driver is being written to what I have that there is not anything found to update drivers.
Here it is hopelessness.

Posted on 12/07/2013, 16:59:

_andrey75_,
_andrey75_ @ 07.12.2013, 10:05*
Well, write with pictures. I put myself a root, all about everything, together with the study of the material, I left no more than half an hour, so I wrote, maybe someone comes in handy. And you are also with the claims.
... Here is a forum, and no one is obliged to anyone, including instructions with pictures.

I agree with you that there is no one who is not obliged to anyone here. As I understand myself how to put Ruth, I will definitely make instructions in pictures.
At the moment I got into a stupor, how to install this fucking driver, I described a little higher that I can't work. I do not like to guess the coffee huts and hunt for the process of installing the driver in exactly exactly like you, unfortunately I can't do it, because under the phrase "Install Drivers" is not clear, despite the fact that there is a sys file Well, I would have been .exe. No problem. It is clear that to run, but what to do with SYS here at all is not anyone who will not understand. I didn't try to fuck something like that, and users who do not know even where the device manager would be crazy.

Posted on 12/07/2013, 17:02:

Andre $ @ 07.12.2013, 12:59*
Wasser has released a new firmware: K-R42 Wasser Firmware Based on Android 4.4 Kikat

$ Andre,
And under T-R42 he will do Kikut, who knows?

Post has been editedAleksandr34 - 07.12.13, 16:55



Rep: (4)
Aleksandr34 @ 07.12.2013, 18:02*
Here it is hopelessness.


That's try:
MK888 / K-R42 / CS918 / MK908 / T428 - Firmware (post # 25362239)



Rep: (30)
Hello. I found how you can play through a virtual gamepad in the programRkremotecontrol.

General information:
In this postTRONSMART T428 Quad Core, RK3188, Android 4.2, 2 GB / 8GB (post # 26330214)The program itself isRkremotecontrol and the program for installing it on Andorid TV " Ehome. "

In the idea of ​​the programEhome. Already pre-installed, it is better to double-check and install. If when installing, it will say that there is already this program, then everything is exactly install this version for reliability.

And so the instruction itself:
1. Install the programEhome.on your consoleandroid tv.
2. Turn on WiFi on your console and connect to the access point.
3. Go to the "EhomeMediacenter" program or in Russian, it can be called "Chief (Aya) Press Center"
4. Go to the settings
Attached Image

5. Make sure the buttons are everywhere. "ON ", And also you can change the name of your server
Attached Image
Attached Image

6. Install on your device (phone, tablet) programRkRemoteControl. I have a great latest version of RKREMOTECONTROL 2.0.3.
7. Turn on WiFi on your own device (phone, tablet) and connect to the same WiFi access point that connected onto the console.
8. We go into the program on your device (tablet, phone) "rkremotecontrol".
9. The program will start scanning and search for servers.
Attached Image

10. Connect to the found server
Attached Image

General information:
With this program you can manage remotely with the mouse, just print and use the virtual console, and the most important thing in it is a virtual gamepad.

11. Go to Virtual Gamepad (Game ).
12. We remove your device (phone, tablet), it will not need it yet.
13. We are looking for a programRKGameControlSetting on their own android tv Console and launch it.
14. When opening, see the following
Attached Image

Consider Read more:
- This button Attached ImageOpens your entire saved button settings.
- This buttonAttached ImageAllows you to add new settings to the game, it is in the buttonAttached Image
- This buttonAttached ImageFolding the program
- This buttonAttached ImageSaves custom buttons to play
- This buttonAttached ImageCloses the program

15. And so you have the RKGameControlSetting program is open on your console.
16. Open any game.
17. Press the buttonAttached Image, Then clickAttached Image.
18. You see the game and these buttons
Attached Image

19. Just it simply put these buttons to the place where there are actions in the game.
Attached Image
.
General information about buttons:
All the buttons you put, they will mimic touch press. It can be understood as if you click your finger into the screen.

20. After put the buttons, clickAttached Imageand press "OK".
21. Close the RKGameControlSetting program by pressing the buttonAttached Image
22. Take your device in your hands (tablet, phone) and already in your open program with a virtual gamepad try to play pressing buttons.

Good luck to all.
Here's my video, as I quickly set up everything in the game Dead Trigger 2 and my brother played using a tablet (I set up and removed).
http://www.youtube.com/watch?v=BDWJSCOCBOO...eature=youtu.be.
Here is the original instruction in English and Chinesehttp: // cs3-2.savagemessiahzine.com.to / 3416527 / rkremotecontr ... E4E7E84574705D1

Post has been edited-SunLion- - 23.09.15, 23:42
Reason for editing: in the header



Rep: (3)
Gudvin_New @ 06.12.2013, 13:54*
Good result gave firmware described in Landers7 postMK888 / K-R42 / CS918 / MK908 / T428 - Firmware. Everything works smartly!

I confirm. Real 1080, immediately. Even by the benchmark.



Rep: (29)
Archy82 @ 07.12.2013, 22:59*
A good result gave firmware described in the post Landers7 MK888 / K-R42 / CS918 / MK908 / T428 - firmware. Everything works smartly!

I confirm. Real 1080, immediately. Even by the benchmark.

Guys, let's, in response about successful firmware, specify your type and version of the device modification. Since in this branch is discussed at once somewhat outwardly similar, but different in the device of the device, it can introduce new delusion users.


I have a device BT351_BT, also called T-R42. Looking for the perfect option for it. While the firmware from Wasser 1.2.3 completely approached it. But there are deficiencies in it - the AV output does not work, sometimes the picture becomes green for a second. No pre-installed EHOME and RKGameControl, XBMC is buggy (put another).

He took her as a basis and tried to change the kernel.
Treed the kernel from K-R42 to it - WiFi and Bluetooth do not work. On the LEWA 1080P kernel from 2.0.4 in general, the picture closes behind the screen, but, but the 720p mode shows normally, the kernel_lon_10p_1.6cpu_v2_base.img core shows normally, but WiFi does not work. I want to try Stock kernels. But there are nephonyatics with a stove firmware - where to take it (in the header there is no direct links)?


I also want to warn users of the rom_flash_tool_137.exe utility - the Flash breakdown is not installed in it (only the Kernel address matches it). I wanted to install a custom recovery, but it did not start, now it starts normally and I can make a backup of the current system. Here are the right addresses (they can be installed manually, but they are not saved).

0x002000 - MISC.
0x004000 - Kernel.
0x00C000 - Boot
0x014000 - Recovery.
0x01C000 - Backup.
0x0dc000 - Cache.
0x11C000 - UserDate.
0x51c000 - Kpanic.
0x51e000 - System
0x63e000 - User.

While waiting 4.4 from Wasser for T-R42



Rep: (18)
I have 888B with a blue and the last firmware from Wasser, everything is fine, but sometimes the image disappears literally for a second (there was no such step), + staircase 2-3 times a week of use by myself rebooted. Do you have a power supply and shd cable or firmware?


Full version    

Help     rules

Now: 13.01.21, 23:03