Samsung GT-I9300 Galaxy S III - Official firmware
Octoplus Samsung.exe
Odin3_v3.09_SGSIII.rarSprinkle ashes!
I downloaded the firmware BTU-i9300XXEMG4-20130724164355 and slipped there the regional part of the GT-i9300xxEmb5_ser_multi_factory, considering that if I could not put a dawk in the mobile to delete data, then --wipe_data does not work. Worked out! I will recover from backup :-(
Do not repeat my mistakes!
UPD.
Since it happened, I decided not to throw out the firmware that is raised with the discharge of all data. Suddenly, who will come in handy with reset? Posted on Yandex.Disk
PDA_I9300XXEMG4_1314436_CSC_SER_I9300OXEEMC1_Factory_reset.rar.
Inside the I9300XXEMG4 system, CSCVersion i9300Oxeemc1, Sales Code Ser, I9300XXEMG4 modem from 2013-Jul-16, TrustZone, Recovery and Bootloader. In general, everything is for firmware through ODIN PC or Mobile OdinData reset .
Not to be confused with assemblies that lay outvasyadubov ! It has a HOME type firmware (without data discharge).
Upd.
Attention! According to the message with XDA
http://forum.xda-developers.com/showpost.php?p=43946365
Downgrade of this firmware (or rather modem) can deliver problems with IMEI.
Post has been editedtester99 - 29.07.13, 17:25
I downloaded the firmware BTU-i9300XXEMG4-20130724164355 and slipped there the regional part of the GT-i9300xxEmb5_ser_multi_factory, considering that if I could not put a dawk in the mobile to delete data, then --wipe_data does not work. Worked out! I will recover from backup :-(
Do not repeat my mistakes!
UPD.
Since it happened, I decided not to throw out the firmware that is raised with the discharge of all data. Suddenly, who will come in handy with reset? Posted on Yandex.Disk
PDA_I9300XXEMG4_1314436_CSC_SER_I9300OXEEMC1_Factory_reset.rar.
Inside the I9300XXEMG4 system, CSCVersion i9300Oxeemc1, Sales Code Ser, I9300XXEMG4 modem from 2013-Jul-16, TrustZone, Recovery and Bootloader. In general, everything is for firmware through ODIN PC or Mobile OdinData reset .
Not to be confused with assemblies that lay outvasyadubov ! It has a HOME type firmware (without data discharge).
Upd.
Attention! According to the message with XDA
http://forum.xda-developers.com/showpost.php?p=43946365
Downgrade of this firmware (or rather modem) can deliver problems with IMEI.
Post has been editedtester99 - 29.07.13, 17:25
tester99,
Naturally, the aside in this firmware laid the wipe date, while in ordinary wipe cache goes. It is made under the service.
Naturally, the aside in this firmware laid the wipe date, while in ordinary wipe cache goes. It is made under the service.
VasyAdubov @ 07/24/2013, 19:55
Naturally, the aside in this firmware laid the wipe date
The chip is that I stitched not from ODIN PC, but from Mobile Odin, where there is a separate item for data reset. I sacredly believed that Mobile Odin ignores the discharge commands from Command. Now I know that Mobile Odin can additionally reset to set, even if in Command only cache cleaning, but if the swipe is specified in the firmware, then even with the dawn cleaning, the date will be discharged.
Home_i9300xxemg4_i9300oxaemg4 (BTU)
Yandexdrive -I9300XXEMG4
Post has been editedNoreg - 24.07.13, 19:58
Yandexdrive -I9300XXEMG4
K
In a hat
Post has been editedNoreg - 24.07.13, 19:58
Hello, how to understand it? :-D.
Ruth is, the state is official. But after the reboot sometimes becomes special. Some anomaly. Reboot helps.
Ruth is, the state is official. But after the reboot sometimes becomes special. Some anomaly. Reboot helps.
In the root access:
 |
MEGAEZHICK @ 07/25/2013, 20:44
Pliz pillars in the Ubunti Firmware Instructions
Fashion Developer Toolkit based on Android (post # 19416592)
He is sad And my grandfather brought me today for the birthday of Galaxy from 3 (Korea) on it not Android and something incomprehensible, I can instead put the Android at least 2,3,5 (the games started they go fast !!!) in the settings The phone does not even know the phone in detail about the device, it looks like one in one as the original and turn on the same and the case 1 in 1 as the original! The rest of the pore was undue with him (((I was a young teen and in the phones I quickly and this is a whole cube rubik.
Colleagues, information has information from our friends onXDAAbout the new firmware XXEMG4. The question stood in the fact that they also often disappeared IMEI. I am not strong in English, translation program (PROMT) -
1. The problem is caused by the modem. On the first starting load with the XXEMG4 modem, it changes / EFS folder / separation into some new format.
2. This problem is not caused by the samsung ROM or RIL. This is caused by the modem. This means that it also affects CM / AOSP / AOKP / OTHER, tested on Archidroid 2. X.
3. If we use an old modem with already modified / EFS, we will not be able to connect to the network, and our IMEI will change to an unknown, starting with number 0079.
Post has been editedBalaganof - 27.07.13, 11:28
1. The problem is caused by the modem. On the first starting load with the XXEMG4 modem, it changes / EFS folder / separation into some new format.
2. This problem is not caused by the samsung ROM or RIL. This is caused by the modem. This means that it also affects CM / AOSP / AOKP / OTHER, tested on Archidroid 2. X.
3. If we use an old modem with already modified / EFS, we will not be able to connect to the network, and our IMEI will change to an unknown, starting with number 0079.
Post has been editedBalaganof - 27.07.13, 11:28
Balaganof @ 07.27.2013, 12:14
In general, if I understood correctly, you need to think about it once again before installing XXEMG4.
I understand that problems may arise if you roll back from MG4 to older firmware
Most Important Thing - XXEMG4 DOESNT Corrupt Your / EFS, IT Changes IT INTO a new format
does not damage EFS and changes to a new format
Post has been editedSamir - 27.07.13, 11:29
Samir @ 07.27.2013, 16:25
I understand that problems may arise if you roll back from MG4 to older firmware
If we understood correctly, yes, but many of our (and their) colleagues had problems with IMEI precisely on this version. And after all, none of them wrote that it happened when a rollback or replacement of the modem.
Noreg @ 07.28.2013, 05:08
Evano how ... This is something new. Is the phone right now? Everything is in place ? No complaints?
After all, I posted on the last page of the forum message with reference to XDA precisely about this firmware. In it, the modem is special. When it is installed, the format of the EFS section changes and the modem replacement for early versions leads to the IMEI tolerance and the impossibility of using the phone. Installing the XXEMG4 firmware back solves this problem and many are restored by IMEI. But for a rollback there is a solution from our colleagues onXDA.
Post has been editedVetal`M - 08.05.17, 12:05
Reason for editing: In the header
Balaganof @ 07/28/2013, 17:08
Make backup EFS and experiment. Judging by the fact that people write - yes.
If the modem leave from the last BTU - does not flit. I now have the firmware XXEMRA with the XXEMG4 - IMEI modem in place.
bob9w, You answered Alex197 .1) Options to reflash to the one that you want, have it flies, you flash the modem from MeG4 with rilates and it is restored. Was it necessary? What does not like this firmware? Just sewing a modem without RILILS from XXMG4 I would not advise. There is a risk that you will not restore with that modem, although I have been restored.
2) to flash the one that you want to shove the modem from the new British, then once again flash the XXMG4 modem already with Rilah, it's a safer option. If you lower the modem, I have to reset how neither twist. What is PonT then to sew it? Old firmware with a new modem. Already on this remain.
Framarut does not work on this firmware, you can get the root using the cap from the cap, to flash the CF-Auto-Root-M0-M0xx-GTI9300 or install the HCM and roll the root in the update.
Post has been editedsnapdragon999 - 28.07.13, 12:42
2) to flash the one that you want to shove the modem from the new British, then once again flash the XXMG4 modem already with Rilah, it's a safer option. If you lower the modem, I have to reset how neither twist. What is PonT then to sew it? Old firmware with a new modem. Already on this remain.
Framarut does not work on this firmware, you can get the root using the cap from the cap, to flash the CF-Auto-Root-M0-M0xx-GTI9300 or install the HCM and roll the root in the update.
Post has been editedsnapdragon999 - 28.07.13, 12:42
Snapdragon999 @ 07/28/2013, 17:20
If you lower the modem, I have to reset anything.
As far as I understood, IMEI is not reset, just old versions of modems are not able to interpret information in the format in which it is transformed during the XXEMG4 firmware.
dimascc can be modem just flash, not the whole firmware
Have to become such a type 004999010640000 and the network does not work, and what is happening there to Samsung questions.
Simple words to change something in the EFS section (some files) when the new XXEMG4 firmware and back when you roll back, then on the previous firmware these files that remained forever in the EFS folder modified, do not allow old modems to work, Ie, he seems to be , not disappeared, but not read. Therefore, the only way out of the situation, who wants to return is to restore the backup of the EFS section before the XXEMG4 firmware or live with a new modem.
Post has been editedsnapdragon999 - 28.07.13, 13:10
Alex197 @ 07/28/2013, 12:39
It is transformed when firmware XXEMG4
Simple words to change something in the EFS section (some files) when the new XXEMG4 firmware and back when you roll back, then on the previous firmware these files that remained forever in the EFS folder modified, do not allow old modems to work, Ie, he seems to be , not disappeared, but not read. Therefore, the only way out of the situation, who wants to return is to restore the backup of the EFS section before the XXEMG4 firmware or live with a new modem.
Post has been editedsnapdragon999 - 28.07.13, 13:10
If anyone use the Android SDK platform the most faithful option to draw backup EFS images, so more reliablehttp://forum.xda-developers.com/showthread.php?t=1901098
CheSKA, It means that it is necessary to clean the scripts, but simply the FEKTOR, the format of the date, cache, the SD card, and the system format does not do and the phone should be loaded. If certainly did not take unnecessary system files. This is not allowed after xp.
Or at least this code * # or * 2767 * 6855 #, * 2767 * 3855 #
Post has been editedNoreg - 28.07.13, 16:59
Or at least this code * # or * 2767 * 6855 #, * 2767 * 3855 #
K
4.11.5. It is forbidden to use slang and abbreviations in the title of the topic. You should write "Bluetooth on Qtek S100", and not "Blutus on KuTek C100". The name of the theme should use the original name of the program or device. In the future, this will facilitate the search by topic name.
Post has been editedNoreg - 28.07.13, 16:59
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement