Rep: (47)
* Aus seversk
Quite simply, if the order of the layers is as follows: front side stekla->glue->film->screen that was first glued film and the glass top on the glue.
If the glass-foil-adhesive screen before gluing has been removed from the shipping tape (it happens in small pimple).

According to the film is not to say, do not like, years 7 not used.

Post has been editeddr.bes - 25.03.19, 12:04



Rep: (47)
* ky3bmu423,
I have a month without glass appeared a bunch of scratches.
Do not be afraid to uv-glass, no risk, the main seal all openings.
Unfortunately, nothing better rounded screens such glasses not glue them easier than film.

Posted on 25/03/2019, 11:29

* Aus seversk
The film was glued to the screen or the previous owner did not remove the shipping tape from this glass?



Rep: (47)
* ky3bmu423,
Look at Ali, somethinglike this
But, if I understand correctly, on the screens and protective stekoah it baked, so it lasts a long time.
Of sampling windows me, the best on oleofobkaHanxibut I came with glass incomplete coverage (in the subject has reviews)
GlassWuKongThere is full cover, but oleofobka worse, wipe on the clothes once a day or several times a day, I am satisfied.



Rep: (47)
* Aus seversk
Overlaid alcohol, hairdryer and patience. Fishing line or a nylon thread safe.

* ROOR25,
You ordered tp2500?
If the adhesive (kits or separate) is normal, then removed the glass as well as a glue factory.

Post has been editeddr.bes - 25.03.19, 08:48



Rep: (47)
* Dmitriy R,
Alcohol removes oleofobku, but unlike solvents makes it slowly rubbed, alcohol wipe. I think, for a dozen and a half rubbing alcohol will be possible to feel the difference.

* Aus seversk
It can help, but alcohol is more effective. The main thing do not use force, the screen could crack.
Most likely the glass is glued to the loca tp1000, instead tp2500.
For clarityherecomparison tp2500 TP1000 and as a bonus on the glass otkovyrivanie tp1000.
I think it is better to take a thin plastic card or a line and remove together with the alcohol.fishing line



Rep: (47)
Comrades, poke nose in previous phones during (and not only) navigation for driving, used to power saving mode, the battery eats much less on this handset in power saving mode does not come gmail until you come to the application and manually update.
Battery->Starting the automatic control applications daw removed from gmail and google services, to no avail (
Please recommend where to dig.
Thank.

Post has been editeddr.bes - 24.03.19, 21:26



Rep: (47)
* Dmitriy R,
Medical example, but it is difficult to buy, I use isopropanol from Radio Shack, but it remains on the plaque, it is necessary to wipe with a dry cloth or non-woven wipes.

Post has been editeddr.bes - 24.03.19, 21:25



Rep: (47)
* Hooligan360452
* ROOR25,
Unfortunately android can not provide data with the current controller and the other, only the battery voltage and battery temperature, the rest speculation application developers.



Rep: (47)
* ROOR25,
And to tear off, then skatyvaty finger after wipe with a cloth with alcohol, do not scratch, with ext. side of a plastic film, scratched very easily.
The uneven adhesive layer may be 3m reasons:
1. Phone is not lying horizontally (curve table or planted something that would compensate the bulging camera.
2. Davilm on the glass to glue zastyvantya.
3. Glue has been uneven or froze earlier than flowed.

Afflict you with tp2500 adhesive layer is substantially thicker than with a complete, if the thickness is so important for you, wait for 15-20 minutes after the glue will be spread under the glass (but for this phone must lie perfectly flat, or glass can go from your phone.

Post has been editeddr.bes - 24.03.19, 20:59



Rep: (47)
* ROOR25,
I'm a big lamp on the piece 20 LED lights up 2-5 minutes. But transparency and distortions it should not affect.



Rep: (47)
* Dmitriy R,
If you can try to 1mm (do not forget to seal the hole) if deeper - the glue does not numb.
But you can try other options:
1.Progret hairdryer, glue allocate oil, it can displace air.
2. drip silicone or other highly liquid oil.

Post has been editeddr.bes - 23.03.19, 23:42



Rep: (47)
* ROOR25,
In experiments with covers, to detach the corners in Hanxi, I began to take off - cracked. The glue is not rubbed, but subjectively wukong seemed stronger.
Yesterday pasted wukong full cover, cover Valid almost complete, even with Supcase style does not seem friendly at the corners.
Oleofobka worse than the Hanxi, but not significantly, image distortion is not noticed. Anyway, all loca-glasses that pasted, oleofobka much better than glasses coated with glue that was holding. Carefully examined wukong case fr. - identical.
You may be out of luck with the adhesive, it is cloudy or yellow, I glued on tp2500f.



Rep: (47)
Several times saw the questions about pereklkeyku screen separate from the frame.
Outvideo procedures
Certainly not the best way, but clearly.



Rep: (47)
* Dmitriy R,
I agree, very small currents will not be allowed to fully charge a comparatively large (4.2Ach) with volume increases and inside. Battery resistance, but 5v 0,7A should suffice.
The situation described by HC.Alexannino not on the battery, and a converter, which can not compensate for input voltage drawdown from poor memory, cables.
It seems because a wider operating range in modern phones (5-9-12v) sacrificed efficiency below 5v.

Post has been editeddr.bes - 23.03.19, 11:00



Rep: (47)
* algalkin,
With all UV glasses print runs as well as without the glass.
Unstuck if it came unstuck often peels the cover, if inconsistent.



Rep: (47)
* Alexannino
It is not a quick charging, and it is obvious to a low voltage at the output of the second memory.
It was the same story with the car charger, noticed that the phone %% 20 is quickly discharged, measured, instead of 5v 1A Output cable was 4.65v 1.1A.



Rep: (47)
* Zyak,
You're right, modelers use li-pol and less LiFe.
The mate li-pol, but the difference between the li-ion cathodes only, not essential for a smartphone.
PS: to have confidence that will live 2-3 years, even writing would not have it all. I strained to 16-20w QC 2-3, and then 40w

Post has been editeddr.bes - 23.03.19, 02:23



Rep: (47)
* nerixfine,
Case great, wear hats of glass, the ends of the glass cover closed frame, all suits me, is that the excessive brutality is not always out of place.
But it is not a small bear in mind, comrade of the branches did not like for this reason, keep in mind that would not be disappointed, the physical dimensions you have.
On the right side edge of a hole, probably for the strap.
The film is not so that would be disgusting, but compared to the glass with a good oleofobkoy not see the point.



Rep: (47)
* nerixfine,
The same and the price is very nice, in a branch ordered out under v30, he ordered there at 20 mate.
If / when you want to pull a stupid film, to remove the remaining adhesive on the film did not use liquids ethyl acetate, destroys the screen frame.
With this task perfectly cope degreaserARIKON universalSlightly moisten the glue and tear off.

Post has been editeddr.bes - 23.03.19, 01:34



Rep: (47)
Zyak @ 22.03.19, 07:41*
Is that you mislead people, where such data?
There is no critical heating.
Huawei and excellent in battery and charging


For such a powerful charge exceeding heating recommendation at 8-10 ° C a good result. But it's magic, it seems black, because 2.5out on battery enclosed in a sealed housing with temperature preservation of ≤40 ° C is fantastic. Whatever we think out on the battery temperature, the built-in sensor to believe or not. 2.5C (!), Even high current (and rapidly dying) batteries are charged for modellers 1C. QC3.0 - 1,2-1,4S (and are heated to the same 40 ° C). Such charge currents definitely helps to speed up the death of the battery, it is necessary to wait for feedback from the first owners, think long.

Full version

Help     rules

Time is now: 28/10/20, 7:52