Rep: (13)
* Narcosis-doom I myself know the process, you better tell me what you have when you download the disk, Evox, an empty disk is inserted? Do you have a native drive? And what kind of adapter use? Me this console will soon dare!)



Rep: (13)
* Narcosis-doom Hello! Tell me how your disk formatted? 1TB which ...
I will tell the background, there is a chipped console, which has been updated by BIOS to support large hard hards. Self-written discs reads with a bang, the drive is not native, I specify, by the way, it turned out to be a worker! So, he read the discs only if the sideline of boxing is inserted, as soon as I insert empty for marking, nothing loads! Although the chipped prefix must be shipped by any disk like Hard and without!



Rep: (13)
* Narcosis-doom , I tried it, but the drive behaves very strangely. Meal I took from PC, because There is no splitter. On the button of departure tray zero reaction and the disc is not clear. But before that he worked! In short, sin on the drive.



Rep: (13)
* Narcosis-doom Here Everything is much easier!



Rep: (13)
* Narcosis-doom I have a native non-working, otherwise with placing the screw either! I still have the same thing, I'm about jumpers, but does not ship the drive disk.



Rep: (13)
* Narcosis-doom , Hi! Please tell me such a question, tried to boot from the boot disk, but I could not. Console is chipovanna, with native hard hard loads without problems, the native drive of the dead.
I tried to start a third-party drive, only the power took from PC, since there is no Molex splitter, jumper in Slave. At this time, a blank hard hard was connected to 500GB through the IDE-SATA adapter, jumper into the wizard.
As a result, the drive cannot spin the disk and naturally always see an error after the Logo "Xbox".



Rep: (13)
* Narcosis-doom For this, the topic was created, the last stronghold, so to speak.
In my plans to put hard and flash Bios, the theory is read, the practice remained. How to make everything I'll post my efforts, at the same time the hat will pour.
Then it will go to the download of games Other Lobuda, there will be more knowledge, perhaps something and tell me.

Post has been editeddigma19 - 13.09.19, 23:23



Rep: (13)
* MrForce23 , The fact of the matter is at 3.60 all the plugins were, the game itself is falling out in error c2 -....... Game TimeSpinner incidentally, requires firmware 3.68. Upgrading the software does not give results.



Rep: (13)
* lbvrf090 , * play007 , Has been updated to 3.65 through moduru turns out it's not difficult. Nakata re hack Enso plugins, but the game did not want to work. Most likely jamb in the game, thanks for the help, all plyusanul.



Rep: (13)
* lbvrf090 , Can I update with the same module? Just throwing 3.60 to the folder? I used to update only through QCMA, plus there was no ENSO.
And another question, the map does not remove anything? Or should it be untie?



Rep: (13)
* chuvachok123 The games do not start, in the case, the plugins do not help.



Rep: (13)
* play007 , I just reread, about the increase mentioned only in the post old.

Posted on 09/10/2019, 21:17:

* lbvrf090 , I need to upgrade, so I'm interested in! If you know what and how, why not give an answer? The procedure is exactly the same as when decreasing? Only I firmware above the right?



Rep: (13)
* lbvrf090 I thought the module to lower the firmware! Those. I'm just a false 3.65 file in the folder and instead of a downgrade I have a firmware rises? So simple? Or are there pitfalls?



Rep: (13)
Guys, tell me, I want to update Witu from 3.60 to 3.65. It is an eno. Will it be safe to delete it and update to 3.65?



Rep: (13)
* Narcosis-doom I personally do not know.



Rep: (13)
* kapotonai2013 Tell me another time, did you have an idea or Sat? Possible development options: the first thing to distort the loop, i.e. Disassemble the console and all the loop to disable and connect back; The second is the size of you hard? There are a glitch because of the 40 pine plume, native from boxing, helps replacement for 80 pins; Third - dying hard, check on the PC to be sector.



Rep: (13)
* kapotonai2013 , Do you have a sofmode or chip?



Rep: (13)
Guys, share the advice! The story is as follows: Fakka 50008 did not read the discs, I ordered the head of the SHC-400C (there was such a plant) from Ali, I changed my head, the result did not change, I decided to disassemble, it turns out that I do not spin the disk at all, and the old head is still alive). So I thought at the beginning, but after reading about similar situations I realized that I did not remove the drop of solder. Once again, and removing the drop, it became much better. But now a new problem, DVDs it does not read, the self-written CD-R read, share the advice that, how and where to twist ...



Rep: (13)
Guys, tell me please, search the forum nothing really has not given if someone encounters an error E 100 and how to overcome it?



Rep: (13)
* RONIN427 What is he? Throw off the link where you can read about it ...

Full version

Help     rules

Now: 24.01.21, 11:13