Rep: (92)
AOSIP Official
Based On AOSP

XDA
Download beta
Download stable

Post has been editedvovcik3 - 29.09.18, 11:43



Rep: (92)
How to switch from MIUI to custom and other related questions
I just received / received a phone and want to install LineageOS / another custom firmware. How to install it?
  1. Check if the bootloader is unlocked:
    1. Download and install MiFlash (so install the driver).
    2. Download and unzip adb & fastboot to the root of drive C (for ease of operation).
    3. Right-click on the start and run the command prompt from the admin.
    4. Enter
      cd C: \ tools_r27.0.1-windows
      Attached Image
    5. Put the phone into fastboot mode (with the phone turned off, hold the volume down and turn on, release it after vibration, a hare should appear in the earflap).
    6. Connect the phone to the computer and in the command line enter
      fastboot devices
      fastboot oem device-info
      If the command line displays Device unlocked: false, then the bootloader is locked, if Device unlocked: true, it means unlocked.
    7. If the bootloader is unlocked, proceed to the next item. And if not, then you need to create (if not yet) an account Xiaomi, get permission to unlock and unlock. More information can be found here: Unlocking XIAOMI bootloaders (if you do not want to wait 360 hours, you can use method of two accounts , but you need to use the version MiFlash Unlock 2.3.803.10).

    For information about the version MiFlash Unlock 2.3 thanksKefirnet.
  2. Install TWRP:
    1. Download and installMiFlash(so install the driver).
    2. Download and unzipadb & fastbootto the root of drive C (for ease of operation).
    3. Right-click on the start and run the command prompt from the admin.
    4. Enter
      cd C: \ tools_r27.0.1-windows
      Attached Image
    5. Download and copy to the tools_r27.0.1-windows folderTWRP(for convenience, it is easier to rename to twrp.img).
    6. Downloadfirmwareand appropriate for herGApps.
    7. Put the phone into fastboot mode (with the phone turned off, hold the volume down and turn on, release it after vibration, a hare should appear in the earflap).
    8. Connect the phone to the computer and in the command line enter
      fastboot devices
      fastboot flash recovery twrp.img
      fastboot boot twrp.img
    9. In TWRP, click Wipe, and there you need to do:
      1. Format Data
      2. Factory Reset
      3. Advanced Wipe (Dalvik cache, Cache, System, Vendor, Data, Internal Storage)
        Attached Image
        Attached Image
    10. Hold the volume up and on and hold until vibration. The phone will enter TWRP.
    11. Click Wipe, and there you need to do:
      1. Format Data
      2. Factory Reset
      3. Advanced Wipe (Dalvik cache, Cache, System, Vendor, Data, Internal Storage)
        Attached Image
        Attached Image
    12. Connect the phone to the computer and download the downloaded firmware and GApps to the phone.
    13. Click Install and install the firmware and GApps.
  3. Enjoy the firmware: happy:
I really liked the gestures in MIUI. Can I somehow make them on custom firmware?
  1. System gestures are supported on ResurrectionRemix. If you have another custom firmware, then you need to put the root and use any program for gestures. For example:®Swipe Navigation [Root].
How to get this root?
First way
  1. Download and copy to your phoneMagisk-v1x.x.zip.
  2. Boot into TWRP.
  3. Click Install and install Magisk.
Second way
  1. Download and copy to your phone:
    1. For LineageOS
    2. For mokee
  2. Boot into TWRP.
  3. Click Install and install AddonSu.
I read / read that the Goodix fingerprint scanner does not work on the firmware. How to find out what is mine?
  1. Get the root.
  2. InstallAndroid Terminal Emulator.
  3. In the application enter:
    su
    getprop | grep goodix
    If the application issues persist.sys.fp.goodix = 0, then you have FPC. And if persist.sys.fp.goodix = 1 - Goodix.
Thanks for the instructionsbrigudav.
I did not like the firmware. How to move to another?
  1. Downloadfirmwareand appropriate for herGApps.
  2. Boot into TWRP.
  3. Click Wipe, and there you need to do:
    1. Format Data
    2. Factory Reset
    3. Advanced Wipe (Dalvik cache, Cache, System, Vendor, Data, Internal Storage)
      Attached Image
      Attached Image
  4. Connect the phone to the computer and download the downloaded firmware and GApps to the phone.
  5. Click Install and install the firmware and GApps.
I heard something about Project Treble. What is it and is it on our phone?
  1. Project Treble is the separation of the low-level component of the system (drivers) and its updated part. Due to this update will receive all users simultaneously who have this feature. More information can be found here:Project treble.
  2. Our phone has this feature. This firmware is installed via TWRP over custom:
    1. DownloadGSI firmware image(for our phone you need Slot A) and the corresponding ones for itGApps.
    2. Go to TWRP, click Wipe, and there you need to do:
      1. Format Data
      2. Factory Reset
      3. Advanced Wipe (Dalvik cache, Cache, System, Data, Internal Storage)
        Attached Image
        Attached Image
    3. Copy the downloaded image (must be in .img format) to your phone.
    4. Click Install, Install Image, find the image and select Install as System Image:
      Attached Image
    5. Then install GApps.
    6. Enjoy the firmware: happy:
I'm sick of it all. How to return the state "as from the factory"?
  1. We are very sorry that you are returning to MIUI, but this is your decision.
  2. Download and installMiFlash.
  3. Download and unzipMIUI for fastboot(you need the Redmi Note 5 Pro Global Stable Version Fastboot File Download item or the Redmi Note 5 Pro Global Developer Version Fastboot File Download) to the root of the C drive (for ease of operation) (during the download, make sure you download the code:WHYRED):
    Attached Image
  4. Open MiFlash and select the path to the firmware by pressing Select and selecting the folder in which flash_all.bat and the image folder are located:
    Attached Image
  5. Put the phone into fastboot mode (with the phone turned off, hold the volume down and turn on, release it after vibration, a hare should appear in the earflap).
  6. Connect the phone to the computer and press refresh.
  7. The phone should appear in the list:
    Attached Image
  8. Choose whether you want to lock the bootloader (clean all and lock) or not to block it (clean all):
    Attached Image
  9. Click flash and wait for the end of the firmware:
    Attached Image

For questions about filling this post, please contactQMS

Post has been editedguguwa - 08.06.18, 17:04
Reason for editing: upd



Rep: (92)
[ROM] [8.1.0]Nuclea rom [Unofficial]
Bugs:
- same as in AEX
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image

XDA
Download

Post has been editedguguwa - 06.06.18, 22:25



Rep: (92)
crDroidOfficial
Build type: Monthly
Posted by: Ruturaj Kadam
Bugs: no
XDA
Download
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedguguwa - 04.06.18, 23:39



Rep: (92)
[OFFICIAL] Team Win Recovery Project
dl.twrp.me

[OFFICIAL] Red Wolf Recovery Project
XDA

well and already page onPixelExperiencethere is. true firmware yet: (

Post has been editeddraiv88 - 24.05.18, 17:27
Reason for editing: In the header

Full version

Help     rules

Time is now: 04/07/20, 18:22