TP-Link TL-MR6400 4g router - Discussion | [wifirouter] 3G / 4G router
0
Something similar happened in the summer when the heat was Zharia). Router on the attic of the country house. Purely accidentally took him in hand, and he is really a garking. Sdlal is a chibery blowing. There were old dual coolers from the / card.
Type such. Like painting
Viktor19940309 @ 05.01.21, 17:10
Has anyone solved the problem of the fact that the router from time to time reboots himself?
Something similar happened in the summer when the heat was Zharia). Router on the attic of the country house. Purely accidentally took him in hand, and he is really a garking. Sdlal is a chibery blowing. There were old dual coolers from the / card.
 |
Type such. Like painting
G. M, What about the blowing the idea is good, only my digger stands on the table, where the temperature does not particularly threaten him, even after a long use, it is just warm.
Post has been editedViktor19940309 - 06.01.21, 07:07
And in the "Personal Account" 191.168.1.1 Cannot monitor the temperature?
Added 06.01.2021, 22:32:
All the same, the question
Added 06.01.2021, 22:32:
G. m @ 04.01.21, 21:55
The question of the external remote antenna is the Yagi gun. Router V4 with cigarette antenatas. Need to do two antennas or both cables to get into the active disk?
An excerpt from the article
https://3g-aerial.biz/...ushka-analiz-i-raschet
At the frequencies of 4G antenna, you can use as a MIMO, for this, it is enough to connect the second input to the active disk at 90 В° to the first and at the same distance S from the edge of the disk (as shown in the figure, well, it showed Kreosan in your video by reference [6] ). Those who read the article on MIMO technology know that we need to have a modem with two entrances and two separate antennas with orthogonal X polarization. In the case of a circular patch, we can combine these two antennas in one. Pushka13This allows you to significantly reduce the costs of "iron", which is a big advantage of this antenna. I want to pay particular attention to anonymous, which came here from YouTube, which is not needed to do
An excerpt from the article
https://3g-aerial.biz/...ushka-analiz-i-raschet
At the frequencies of 4G antenna, you can use as a MIMO, for this, it is enough to connect the second input to the active disk at 90 В° to the first and at the same distance S from the edge of the disk (as shown in the figure, well, it showed Kreosan in your video by reference [6] ). Those who read the article on MIMO technology know that we need to have a modem with two entrances and two separate antennas with orthogonal X polarization. In the case of a circular patch, we can combine these two antennas in one. Pushka13This allows you to significantly reduce the costs of "iron", which is a big advantage of this antenna. I want to pay particular attention to anonymous, which came here from YouTube, which is not needed to do
All the same, the question
Hello members of the forum. Are there any progress in terms of changing and fixing TTL?
Post has been editedFart45 - 09.01.21, 10:03
Post has been editedFart45 - 09.01.21, 10:03
Firmware with a transfer function to the frequency of 2600. (Everything works, tested on its modem)
https: //support.unet.b...d0%BE%D1%82%D1%83-2600-
Post has been editedSavinovsv1950. - 10.01.21, 10:42
https: //support.unet.b...d0%BE%D1%82%D1%83-2600-
Post has been editedSavinovsv1950. - 10.01.21, 10:42
Alteration of the router TL-MR6400 V.1 on Flash 16MB and OpenWRT firmware v.19.07.5
1. Used the sticker of 30mm from each edge. Under it two screws. We disassemble the box.
2. Remove the protective screen. Dremel drink a slice of the bottom screen to facilitate access to the WinBond W25Q64 chip
3. Easp the chip, carry it to the programmer
4. Read the dump and save in the archive just in case
5. We buy the Winbond W25Q128 chip (WSON-8 case)
6. Download file from this message.6400V1_FULLDUMP16MB_PEPE2KBBOOT_RIGV180522_NOMAC.BIN.
As follows from his name it:
- Full memory dump TP-LINK TL-6400 V.1 device (for version 1 only!)
- Loader from PEPE2K (not ketai rubbish Breed, and the Polish normal loader) with the ability to update the firmware from the console. What cancer you would not put this device, there is always the opportunity to flash just from a computer under Windows, simply selecting the desired file can be easily sewn to the original and custom software several times a day
- Firmware original last from TP-LINK V.180522. Language, EN'NE, English
7. Open this file by any non-editor.
By the address
0x1FC00
Find MAC-address
A1-B2-C3-D4-E5-F6
If he is not pretty to you, I reveal to your own, which is on the sticker on the ass appliance
If you do not care, we leave everything as it is
8. Pour the modified file6400V1_FULLDUMP16MB_PEPE2KBBOOT_RIGV180522_NOMAC.BIN. programmer in the chip W25Q128
9. We rinse, blow, turn on. We are convinced that the device works normally under the native firmware Tr-Link
10. Turn off. Click the reset button and turn on the power. We consider three outbreaks of LEDs, let go of the button. LEDs must continue to flash once per second. So you are in the loader. If the LEDs are not blinking, we continue attempts yet do not fade all the time.
11. On the computer in the settings of the network interface, we set "Getting IP automatically"
12. Connect the computer and LAN-port of the router by patch cord, i.e. direct Ethernet cable
14. We go to the downloader at the address192.168.1.1
15. Pour the firmware:
OpenWRT-19.07.5-AR71XX-GENERIC-TL-MR6400-V1-Squashfs-Factory.bin
Do not confuse! At first, then, where at the end of the Factory.
After a couple of minutes, the router will overload. Do not twitch it and wait until he comes with light bulbs.
16. We work naturally. At 192.168.1.1 will be a LUCI web interface.
17. Through LUCI, we update the firmware firmware:
OpenWRT-19.07.5-AR71XX-GENERIC-TL-MR6400-V1-Squashfs-Sysupgrade.bin
Must go to reboot itself. If 10 minutes fails, then manually on the reboot, via the interface.
18. Percentage and memory it is advisable to glue small radiators, drinking the windows in the metal screen and encroaching the jumpers on the bottom screen
19. The fee is advisable to cover two layers of varnish Plastik-71, if the router will live in the country or in the garage
20. The internal modem web interface is located at192.168.0.1/login.html.
21. If OpenWRT you did not like, pour back native firmware6400v1_orig_tplink_firmware_v180522.bin. through the bootloader according to claim 10
.
MAC-address
 |
.
Mikruha memory
 |
.
TP_LINK_TL-MR6400_V1.RAR.(10.88 MB)P.S.
IMEINOT It changes in the firmware of the microhi of the memory of the router, nor through OpenWRT. He sits in the LTE module, i.e. Modem, i.e. Separate device as part of this router.
Radiator on the processor
Photo radiators
.
.
 |
.
 |
Post has been editedXamleTT - 18.01.21, 14:36
Reason for editing: 2021.01.18
Savinovsv1950. You will not be difficult for the screen to make this window with the frequency setting?Sologuitarist88 @ 01.01.21, 00:45
Screen make
By reference, the full instruction with screenshots.
Band selection screen for 4G
 |
P.S.
Select the only 4G_band for v.3 and v.4. Many mind is not necessary. This is added to firmware and V3 and V4.
For V5, you will soon add, if you have not added the same choice in the menu
For version V.2 of choice in the menu, there is no, but there are three types of firmware for the inner LTE module:
Band_1800, Band_2600, Band_1800 + 2600.
How to make a fixation Band for v.1 I have not yet understood.
Is the firmware of the module from V.2 for V.1, no one knows no one, and experiment itself and put the LTE module in my plans are not included.
In any case, for V.1, there is some kind of command via ADB Shell, which fixes the Band on one value.
It remains to find out the team or hoping that someone will tell.
If someone managed in version V.1 to lock 4G-band - tell me how, plz.
: blush:
Post has been editedXamleTT - 12.01.21, 04:56
The TC OFTOP is partially, and the crosspost (asked in the other topic, from where they sent here, although I somehow sounded here, but to no avail, and the question itself disappeared, so the question itself is in the spoiler in the FTTOP format) but I will be very grateful for help
By the way, it came across the info that TL-MR150 V2 is a complete copy of TP-LINK MR-6400 V4 00002. Has anyone tried to firm the firmware from the 150th to pour into our device? There seems fresh.
Post has been editedsologuitarist88 - 14.01.21, 13:02
Comrades, good afternoon. Please tell me if there is a software for a PC to track a real-time signal? In particular, I have a modem TP LINK 6400V4. Its web muzzle can show the signal parameters (Sinr, RSSI, etc.), but only at the time of loading the page, if for example I use an antenna, then when setting up (rotations / slopes), each time you have to update the page to get-to see the updated data. Maybe you can get around? To, for example, how the E3372 modem, the signal and its characteristics are updated automatically in real time. so that F5 is constantly not poke?
By the way, it came across the info that TL-MR150 V2 is a complete copy of TP-LINK MR-6400 V4 00002. Has anyone tried to firm the firmware from the 150th to pour into our device? There seems fresh.
Post has been editedsologuitarist88 - 14.01.21, 13:02
SOLOGUITARIST88 @ 14.01.21, 10:52
Its web muzzle can show the signal parameters (Sinr, RSI, etc.), but only at the time of downloading the page,
he himself twisted the antenna - the partner updated the page - the partner twisted the antenna - I updated the page myself
Read more How to twist antenna:
MR6400 consists of 2 parts. Router under his firmware, modem under his own.
So that the flow, in the firmware of the router, the inclusion of a continuous survey of the modem must be implemented and the output to the router,
Because Web page of the modem itself in the standard firmware of the router is blocked, but it can be seen under the firmware OpenWRT,
Get the stream simply by pressing the button is not so simple, because Multi-mode, and multidia-band.
for each diapaoson, i.e. WCDMA / 3G / UMTS Your signal survey procedure.
You can contact the modem directly, first by contacting the ruter through, say Putty, and already from there via ADB Shell talk to the modem.
It is only necessary to deal with teams for each range, like a person trying here:
https://coderoad.ru/38...b0%D0%BB%D0%B0-3G-UMTS.
In the cross-topic (or from the TP-Link site), such a question has already been answered that the problem is inflated.
Support this answer.
I need to fix 4G-band on the same range in 6400_v1, so that the modem did not jump on the bands like a rabid goat over the field, and the connection did not take me.
Modem to work at the reception every day. This is relevant. And even Tplink himself made it in the firmware only for V3-V5, and the solution with flashing for V2.
But as always scored on V1.
those. Those people who believe in TP-Link, which at the maximum starting priceIt was more expensive than everyone paid their blood for the first version - once again have been pacified with updates.
And those who dragged at the discount on a december V4 - has all the rugs and gingerbread gingerbread. right?!
I can not find my such shell-team yet, but it is already close to solving through the modem back, which I also will arrange.
And at one time, the modem can also be stupidly imposed on KNTTRL + update and report the pages, I do not see anything shameful and the discluster honor.
But if you really need you, then you need to write a script for a router, so that he interviewed the modem. Although first it is necessary to change the firmware to a normal opnvent that allows scripts.
Well, or wait until Tplink himself will not add fun in the factory firmware.
Shl.
Suesely that this function of a permanent survey of the signal strength is needed to you not just for one-time antenna setting.
It is unlikely to reconfigure the antenna twice a day.
But for which it is needed - I have not guessed. Here I think how it can be monetized .. I haven't come up yet, but I don't have it easy to youHIGHLY So need. oh not with simple ..
Remove with 6400 Microud, read, save the dump. flash-check. If all the cancer rose - return the firmware by the programmer. I have no v4. So could try.
So that the flow, in the firmware of the router, the inclusion of a continuous survey of the modem must be implemented and the output to the router,
Because Web page of the modem itself in the standard firmware of the router is blocked, but it can be seen under the firmware OpenWRT,
Get the stream simply by pressing the button is not so simple, because Multi-mode, and multidia-band.
for each diapaoson, i.e. WCDMA / 3G / UMTS Your signal survey procedure.
You can contact the modem directly, first by contacting the ruter through, say Putty, and already from there via ADB Shell talk to the modem.
It is only necessary to deal with teams for each range, like a person trying here:
https://coderoad.ru/38...b0%D0%BB%D0%B0-3G-UMTS.
In the cross-topic (or from the TP-Link site), such a question has already been answered that the problem is inflated.
Support this answer.
I need to fix 4G-band on the same range in 6400_v1, so that the modem did not jump on the bands like a rabid goat over the field, and the connection did not take me.
Modem to work at the reception every day. This is relevant. And even Tplink himself made it in the firmware only for V3-V5, and the solution with flashing for V2.
But as always scored on V1.
those. Those people who believe in TP-Link, which at the maximum starting priceIt was more expensive than everyone paid their blood for the first version - once again have been pacified with updates.
And those who dragged at the discount on a december V4 - has all the rugs and gingerbread gingerbread. right?!
I can not find my such shell-team yet, but it is already close to solving through the modem back, which I also will arrange.
And at one time, the modem can also be stupidly imposed on KNTTRL + update and report the pages, I do not see anything shameful and the discluster honor.
But if you really need you, then you need to write a script for a router, so that he interviewed the modem. Although first it is necessary to change the firmware to a normal opnvent that allows scripts.
Well, or wait until Tplink himself will not add fun in the factory firmware.
Shl.
Suesely that this function of a permanent survey of the signal strength is needed to you not just for one-time antenna setting.
It is unlikely to reconfigure the antenna twice a day.
But for which it is needed - I have not guessed. Here I think how it can be monetized .. I haven't come up yet, but I don't have it easy to youHIGHLY So need. oh not with simple ..
By the way, it came across the info that TL-MR150 V2 is a complete copy of TP-LINK MR-6400 V4 00002. Has anyone tried to firm the firmware from the 150th to pour into our device? There seems fresh.
Remove with 6400 Microud, read, save the dump. flash-check. If all the cancer rose - return the firmware by the programmer. I have no v4. So could try.
UPD:
Where is the problem?
I went to myself on 6400_v1 to the address of the modem:
http://192.168.0.1/login.html
In the upper right corner of 5 sticks.
Without unscrewing the antennas, I accelerate the radio wave near the antennas - the signal strength changes in dynamics.
Sticks are more, then less becomes. With a discreteness of 20%, you can configure the signal strength and antenna orientation at least 5 times per day.
The current gives me that it is not necessary to customize the antenna .. and then what?
Photo of the signal strength in dynamics 6400_v1
 |
Post has been editedXamleTT - 15.01.21, 04:47
YesV.1.
This is a webmord of an internal modem, not the router itself.
At the router, where you are written in Trilink, Mena has written Openworth.
I definitely do not know, but a campaign under the firmware of Tplink on the webmond modem to get the lowest.
I bought a modem, a couple of minutes after the first inclusion, I immediately transferred it.
Try to go to the address
http://192.168.0.1/login.html
Admin \ Admin.
(In the Openwart Web Morda Maudem is not blocked from the people)
And the firmware from the modem is native. put from the site of Tplinka.
from the general firmwareTL-MR6400 (EU) _V1_180522.zip
Shl.
Killed today for a couple of hours at him.
I can not turn off 4g range-3 (1800mHz). :( The people perhaps to include all 4g bands, and I need a reverse chip.
The campaign must sell it and take the V4. Let the ShapShot from the OpenWart and finish already on the knee.
Post has been editedXamleTT - 18.01.21, 01:54
This is a webmord of an internal modem, not the router itself.
At the router, where you are written in Trilink, Mena has written Openworth.
I definitely do not know, but a campaign under the firmware of Tplink on the webmond modem to get the lowest.
I bought a modem, a couple of minutes after the first inclusion, I immediately transferred it.
Try to go to the address
http://192.168.0.1/login.html
Admin \ Admin.
(In the Openwart Web Morda Maudem is not blocked from the people)
And the firmware from the modem is native. put from the site of Tplinka.
from the general firmwareTL-MR6400 (EU) _V1_180522.zip
Shl.
Killed today for a couple of hours at him.
I can not turn off 4g range-3 (1800mHz). :( The people perhaps to include all 4g bands, and I need a reverse chip.
The campaign must sell it and take the V4. Let the ShapShot from the OpenWart and finish already on the knee.
Post has been editedXamleTT - 18.01.21, 01:54
Hello everyone, I want to buy a 4G router, choose between it and Huawei B310, who has been using TP Link for a long time, say, it is stable or not, the network disappears whether you have to restart?
It is better to take Huaway, I have a corporate mail through TP-Link, everything else seems to work.
Aizon7. I use about 3 months. From the point of view of reliability, work and reliability there were no complaintsAzar_mike @ 16.01.21, 10:37
I have a corporate mail through TP-Link
The problem is not in the wine or \ and modem firmware.
Exceptionally in the modem settings.
Sologuitarist88 @ 16.01.21, 22:26
From the point of view of reliability, work and reliability there were no complaints
And if you put the radiator at the percent and put everything with a spread with two layers - finally like kalash will be shy.
Firmware firmware, OpenWRT of course taxis, but physical execution, cooling, transitional resistance on the board, the effect of components on a wet board on each other - no one has canceled.
+ andPower Supply !!! Native fuflo on the trash. We put the linear power supply on the trance for 2 - 2.5a with good coeff. Stabilization.
And the replacement of the clubs on the board to normal, and not that slag that chinks put in the factory.
and normal antenna
You can already change the body to change ..
And as a result, an industrial, industrial router, which works (I have at least) in conditions from -30 to +40 with humidity of up to 85%, was obtained with mining investments.
And now we go to the catalog and look at how much bobla weighs a prom router .. who, by the way, on the same OpenWRT itself and, often, on the same atheros-proce.
ps
My opinion is not necessary to load the router, which sucks an Internet, unusual tasks. His case is to supply an Internet without interruptions! And stat routes point.
those. Under Wifi - put your separate access points
Under VPN - we put a router that raises VPN channels to your, cottage, garage, office, mother-in-law, mistress ..
Under SIP telephony - your device
Under TV - your console
Post has been editedXamleTT - 17.01.21, 01:26
Answers from caliper Trilink Ru for fixing one of 4G-band for 6400_V1
As expected, their answer is purelynegative .
The meaning of their politics is as follows:
- on yourThe old The version of the firmware will not be!
- In 2016, you gave 100 euros for a piece of fees, which is nowNOT supported by
- If you want to use our equipment on full functionality - throw your old fee and buy our new one!
- We do not understand anything in this equipment and cannot tell you the team for the inner LTE modem, because We finally do not care about some "teams". We need a bob from selling new devices, and not some of your "teams" there ...
I will try to put English IP and write an international caliper in English.
Because Even if you write in English now, they see they see the country and ship into this frostbitten local caliper.
We will continue to try to fix the choice of frequency on one of the 4G-band.
Post has been editedXamleTT - 18.01.21, 01:48
As expected, their answer is purelynegative .
The meaning of their politics is as follows:
- on yourThe old The version of the firmware will not be!
- In 2016, you gave 100 euros for a piece of fees, which is nowNOT supported by
- If you want to use our equipment on full functionality - throw your old fee and buy our new one!
- We do not understand anything in this equipment and cannot tell you the team for the inner LTE modem, because We finally do not care about some "teams". We need a bob from selling new devices, and not some of your "teams" there ...
Answer_Pount_1.
Hello.
Thank you for contacting.
Unfortunately, 6400V1 did not go out with a frequency selection.
It is unlikely that this software appears, since the model is old.
Please definitely inform us whether our recommendations helped. For this
Just answer our letter, for example, "Thank you helped."
If we specify your information, please definitely give us an answer,
So that we can figure out the most detailed in the question.
--
Best wishes
Egor
Technical Support Engineer
TP-LINK TECHNOLOGIES CO., LTD.
Tel: +7 (495) 228-55-60
8 (800) 250-55-60
Site: [1] www.tp-link.com/en
Please keep the correspondence in response.
Thank you for contacting.
Unfortunately, 6400V1 did not go out with a frequency selection.
It is unlikely that this software appears, since the model is old.
Please definitely inform us whether our recommendations helped. For this
Just answer our letter, for example, "Thank you helped."
If we specify your information, please definitely give us an answer,
So that we can figure out the most detailed in the question.
--
Best wishes
Egor
Technical Support Engineer
TP-LINK TECHNOLOGIES CO., LTD.
Tel: +7 (495) 228-55-60
8 (800) 250-55-60
Site: [1] www.tp-link.com/en
Please keep the correspondence in response.
Ansupport_2
Hello.
For the first version there will be no firmware with the choice of Band-a.
As for the internal LTE modem - developers do not provide us
information.
The firmware from the second version is not suitable for the first.
Please definitely inform us whether our recommendations helped. For this
Just answer our letter, for example, "Thank you helped."
If we specify your information, please definitely give us an answer,
So that we can figure out the most detailed in the question.
--
Best wishes
Viktor
Technical Support Engineer
TP-LINK TECHNOLOGIES CO., LTD.
Tel: +7 (495) 228-55-60
8 (800) 250-55-60
Site: [1] www.tp-link.com/en
For the first version there will be no firmware with the choice of Band-a.
As for the internal LTE modem - developers do not provide us
information.
The firmware from the second version is not suitable for the first.
Please definitely inform us whether our recommendations helped. For this
Just answer our letter, for example, "Thank you helped."
If we specify your information, please definitely give us an answer,
So that we can figure out the most detailed in the question.
--
Best wishes
Viktor
Technical Support Engineer
TP-LINK TECHNOLOGIES CO., LTD.
Tel: +7 (495) 228-55-60
8 (800) 250-55-60
Site: [1] www.tp-link.com/en
Our answer Chamberlain:
Did not help !!!
Outraged by a spray attitude towards people who buy the first
version of your equipment at the maximum price and in the end remain without
Support and new firmware !!!
Outraged by a spray attitude towards people who buy the first
version of your equipment at the maximum price and in the end remain without
Support and new firmware !!!
I will try to put English IP and write an international caliper in English.
Because Even if you write in English now, they see they see the country and ship into this frostbitten local caliper.
We will continue to try to fix the choice of frequency on one of the 4G-band.
Post has been editedXamleTT - 18.01.21, 01:48
Viktor19940309 @ 23.12.20, 11:21
I got myself the MR6400 inserted SIM card and disappointed that the speed via the router is 2 times lower than the same SIM card on the phone issues. (Phone 60-100 issues, and the router 25-35MB is only speed) with which it can be connected
I managed to figure it out? I have the same situation in MR-150
sevalx , Look out the release of Eugene Radar on this topic. He is clearly chewing there why. And this is not a cant specifically a router. This is an operator clock.©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement