HTC Blackstone - Flashing | HTC Touch HD / HTC T8282
The material presented on the page is unofficial (with the exception of official firmware), in the event of unsuccessful firmware or destruction of the device, the author of the software and the Administration do not bear responsibility for the resource! All actions are performed at your own risk!
FlashingHTC Touch HD
Discussion пїЅ | FAQ | Flashing пїЅ | FAQ on flashing пїЅ | Project OMG! - 6.1 пїЅ | Project OMG! - 6.5 пїЅ | Project Russian Blackstone - 6.1 пїЅ | Project Russian Blackstone - 6.5 пїЅ | Firmware from Korand - 6.1 and 6.5 пїЅ | HTC Touch HD - ASCHE пїЅ | HTC Blackstone - Firmware from Petrovych [RUS] пїЅ | HTC Blackstone - Firmwares from j-a-c-k [WM6.5] [RUS] пїЅ | HTC Blackstone - Firmware from MaxRA [WM6.5] [RUS] пїЅ | HTC Blackstone - Firmware Light from Mikhei777 [WM6.5] [RUS] пїЅ | HTC HD Rom 6.5 By Horse пїЅ l HTC Touch HD + Android OS пїЅ | Purchase пїЅ | GPS пїЅ | IGO builds from eXodus пїЅ | Accessories пїЅ | Video accelerator support пїЅ | Yota - software пїЅ | OEM Software Adaptation пїЅ
Choose the best firmware
All references are infirst post.
Hardspl Rollback to official firmware
Universal flasher from Barin'a
Post has been editedKUKUndrik - 29.08.16, 14:47
FlashingHTC Touch HD
Discussion пїЅ | FAQ | Flashing пїЅ | FAQ on flashing пїЅ | Project OMG! - 6.1 пїЅ | Project OMG! - 6.5 пїЅ | Project Russian Blackstone - 6.1 пїЅ | Project Russian Blackstone - 6.5 пїЅ | Firmware from Korand - 6.1 and 6.5 пїЅ | HTC Touch HD - ASCHE пїЅ | HTC Blackstone - Firmware from Petrovych [RUS] пїЅ | HTC Blackstone - Firmwares from j-a-c-k [WM6.5] [RUS] пїЅ | HTC Blackstone - Firmware from MaxRA [WM6.5] [RUS] пїЅ | HTC Blackstone - Firmware Light from Mikhei777 [WM6.5] [RUS] пїЅ | HTC HD Rom 6.5 By Horse пїЅ l HTC Touch HD + Android OS пїЅ | Purchase пїЅ | GPS пїЅ | IGO builds from eXodus пїЅ | Accessories пїЅ | Video accelerator support пїЅ | Yota - software пїЅ | OEM Software Adaptation пїЅ
Choose the best firmware
All references are infirst post.
Hardspl Rollback to official firmware
Universal flasher from Barin'a
Post has been editedKUKUndrik - 29.08.16, 14:47
Reason for editing: adding a reference to the flasher from Barin'a
There will be collected links to firmware for this unit, as well as tools for firmware and instructions for them.
Official:
1. RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
2. Russian firmware! RUU_BlackStone_HTC_RUS_CIS_1.14.484.0_Radio_52.49a.25.26_1.09.25.14_Ship
3. Link to official firmware with other languages ​​other than English and Russian.
Not official:
1. RUU Black ONYX v. 1.0 RE Russian
Russian first custom firmware for devices based on the HTC Touch HD platform
1. Firmware is collected on the basis of Russian Official firmware for this unit.
2. Simtema optimized.
3. Added custom programs.
4. Removed some unnecessary modules
5. embed proven registry tweaks to improve performance.
Sh3lby 1.6 WWE 23506 Manila 2.5.1921 / 2.1 / NM
Utilities:
CustomRUU (from XDA)Download
This flasher differs only in that it will not format your device after the firmware (if you like pierced only radio module or Splash.)
Post has been editedPrislav - 19.11.09, 10:45
Official:
1. RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
2. Russian firmware! RUU_BlackStone_HTC_RUS_CIS_1.14.484.0_Radio_52.49a.25.26_1.09.25.14_Ship
3. Link to official firmware with other languages ​​other than English and Russian.
Not official:
1. RUU Black ONYX v. 1.0 RE Russian
Russian first custom firmware for devices based on the HTC Touch HD platform
1. Firmware is collected on the basis of Russian Official firmware for this unit.
2. Simtema optimized.
3. Added custom programs.
4. Removed some unnecessary modules
5. embed proven registry tweaks to improve performance.
Sh3lby 1.6 WWE 23506 Manila 2.5.1921 / 2.1 / NM
Utilities:
CustomRUU (from XDA)Download
This flasher differs only in that it will not format your device after the firmware (if you like pierced only radio module or Splash.)
Post has been editedPrislav - 19.11.09, 10:45
MaxDarklighter @ 16.11.2008, 16:20
Guys this Rashn firmware chtol? } -)
Just all firmwares have the prefix RUU -R OM U pdate U tility.
A firmware language Specifies the letter abbreviation in the name of the firmware itself: WWE - English; RUS - Russian, etc.
M
Do I need to immediately collect proshiviki different from Russian and WWE?
The fact is that quite often, when a failed flashing device is inserted in a state where the original firmware already "killed", but the new, for whatever reason, not been established and the device, of course, is not loaded and is stopped at the bootloader screen. In this case, you can restore the device, at least two ways:
- in bootloader to connect USB-cable, and run the EXE-file firmware
- written in the root of the cardnbh -file firmware image, renamed by the rule seriynoe_imya_devaysaimage.nbh where "seriynoe_imya_devaysa" - usually the name of the device that specified under BATTERY, such as nike (HTC Touch Dual), etc.
But, the fact is that without unlocking can be installedonly native firmware! : Angry:
Here in this case the native firmware and useful - sewn and restores devaysa, then it is possible again to "play" with the unlock stuff and reinsertion! : D
Post has been editedPetrovych - 19.01.11, 17:58
Regional affiliation devaysa can learn to write so ... not necessarily in HTC))
1. 1st option(registration required)
2. 2nd option
3. 3rd embodiment
Post has been editedPetrovych - 19.01.11, 17:46
1. 1st option(registration required)
2. 2nd option
3. 3rd embodiment
Post has been editedPetrovych - 19.01.11, 17:46
Reason for editing: Led links in line with the current reality
That is, if I understand you correctly, I am subject to the official firmware from another region - not a problem? The main problem - to bypass the protection of the digital signature is to put self-assembling firmware?
OlegROA
Quite verno.Region lock -snimaetsya two ways .Libo hardware (to disassemble the machine and vypayat-solder rezik) -but I have not seen this yet, either in the firmware patch in only 2 OS file.
Recording the patched firmware can be carried out not only through the official proshivalshikom bootloader mode.
You can write your NAND flasher to be out of WM to write directly to the NAND - it has been done before, and look all series Typhoon, Wizard Prophet, etc. which uses DiskOnChip. Utilitiesitsme well it delali.I no signature there inappropriately.
Digital signature directly on the NAND no. Firmware nbh format is a container in which pieces of code are digitally signed, SPL as directly writing to the NAND throws the signature itself.
SSPL became used as the easiest and most reliable option and had several objectives -technology thereof, the waste has been a long time and began with a simple Haret to boot Linux on the device.
One of tseley- SSPL was conceived in order to run the corrected bootloader to RAM bear away without fear of device - After the immediate post for NAND to bootloader (any flash DOC ONENAND, etc.) is the risk of any mistake in the code lead to a fatal effect.
Since SSPL runs the SPL into RAM and you can check your SPL coordinates you patchish without touching the original which is on the second NAND .Nu effect it is actually unnecessary to write the flasher -SPL does everything himself, wrote in a desired area, etc. and etc.
What easier -napisat once a program that loads into RAM SPL -prichempof I wrote its universal .chem for each device to write the flasher.
Actually SSPL development was so was first HAret for Linux, then this idea uhvalil florin from imei-check and used in komerrcheskom razlok (by the way in the first versions thereof were immediately used even the function names from Haret) and yelling later that idea with SoftSPL he stolen -Full versionDes exploring the trinity and hermes wrote for them SSPL first version (actually he gave him the name SoftSPL), Olipro by using the same SSPL Des It produces HardSPL. Then Des for unclear reasons, disappear-although recent messages while it was about what he actually did some more kinds SSPL on sushestvuschie Soup and then saw the way the release of a generic version. But since appeared on the scene a new device Artemis - was raised by an old theme with Haret - ricardo Afonso the man who was released in time to unlock Wizard together with pof Haret adapted for OMAP processors and utility psetmem (from itsme) for loading SPL in the desired area of ​​the RAM (even though development for testing purposes was before, and the first version was for the Wizard) Hereinafter, some people (nebudu disclose their names) immediately correct himself for SPL Artemis clean signature verification, etc. and etc. - and actually collect all pile up and release USPL (Update SPL) .Vidya that the method is very simple and efektiven - pof completely from scratch writes universal program JumpSPL .Nu and then the HTC Kaiser era begins on chips from Qualcomm -private JumpSPL method works for them but HTC begins to actively fight this method builds into butts additional checks, etc. and etc. but they were broken and found a workaround out different versions of the JockyW pof Olipro . There appears on the scene Daimond in which HTC has gone further in terms of protecting -one closed portion of RAM on the record and then OliNEx (Olipro and cmonex) relochat (moves in the address space) itself SPL in the area where you can load it into RAM.
Actually so far all :)
Regron @ 12.12.2008, 11:28
do not pull the cat's stain ... what does it with the telephone?
how sewn? sewed Russian official?
how sewn? sewed Russian official?
Hang out in the public access does not want is afraid that NTSyuki slam this loophole.
Post has been editedPetrovych - 19.01.11, 18:09
Onhttp://forum.xda-developers.com/showpost.p...p;postcount=324cmonex writes:
BTW, it is not the russian solution, this is a different backdoor I finally just managed to implement after lots of reversing of the SPL. russian solution uses blacdiag.nbh, mine does not and so it will work on any HD with any CID
And what is the Russian decision and that there blacdiag.nbh and why the silence about him.
It is not whether the decision which alter cell phones sold in Russia for a month and a half as the?
BTW, it is not the russian solution, this is a different backdoor I finally just managed to implement after lots of reversing of the SPL. russian solution uses blacdiag.nbh, mine does not and so it will work on any HD with any CID
And what is the Russian decision and that there blacdiag.nbh and why the silence about him.
It is not whether the decision which alter cell phones sold in Russia for a month and a half as the?
cmonex really found a way to flashing only the official version. yet it is not HSPL. and the fact that only works for specific devices, meaning that flash the absolutely any touch hd, simple process, as I understand it, is tied to the CID and to flash it creates some kind of special I've found that works only for devaysa, under which he was created. for another devaysa need to create a file is another. That's why you need to access it. and again, when handling it really asks to make her donation, and then says that pereproshet. some after the donation does not respond for several days already. xdadevelopers slipped on the information that she just needed a few testers, and now, when she realized that all the works, decided to capitalize on this good money.
Posted 13-12-2008, 8:11:
as I understand it, then unlock stuff and doing our romodel - remember. and he just got in touch with cmonex, to discuss successes, etc. and it was then that she wrote that she has a solution. and the fact that no Russian, possibly meaning that remember`a had his own way, which cmonex and mentioned in this report. In addition, remember himself confirmed to Russian xda-developers, that the experimental HSPL he has. so that all the questions to him.
Post has been editedtraum88 - 13.12.08, 08:13
Posted 13-12-2008, 8:11:
ceccato @ 13.12.2008, 2:06
And what is the Russian decision and that there blacdiag.nbh and why the silence about him.
as I understand it, then unlock stuff and doing our romodel - remember. and he just got in touch with cmonex, to discuss successes, etc. and it was then that she wrote that she has a solution. and the fact that no Russian, possibly meaning that remember`a had his own way, which cmonex and mentioned in this report. In addition, remember himself confirmed to Russian xda-developers, that the experimental HSPL he has. so that all the questions to him.
Post has been editedtraum88 - 13.12.08, 08:13
here are some of the actions that occur when flashing
ERROR [242]: INVALID LANGUAGE
пЃµ ERROR [244]: INVALID IN MODEL
пЃµ ERROR [294]: INVALID IN MANUFACTURER
пЃµ ERROR [296]: UPGRADE ONLY
One of these error messages will appear if you are using to upgrade the wrong RUU tool. RUU tool will check if match IN (ID) model and language IN this unit. For modernization, use only a suitable tool RUU.
-I think that the only question is how and what to IN stitched rum to make changes to these ID and further official firmware will take place in the usual way provided for HTC?
ERROR [242]: INVALID LANGUAGE
пЃµ ERROR [244]: INVALID IN MODEL
пЃµ ERROR [294]: INVALID IN MANUFACTURER
пЃµ ERROR [296]: UPGRADE ONLY
One of these error messages will appear if you are using to upgrade the wrong RUU tool. RUU tool will check if match IN (ID) model and language IN this unit. For modernization, use only a suitable tool RUU.
-I think that the only question is how and what to IN stitched rum to make changes to these ID and further official firmware will take place in the usual way provided for HTC?
mishk23 @ 13.12.2008, 3:18
Really need a Hard SPL, waiting for the code will appear.
First need SSPL, which will allow to flash unsigned file without checking sida. And then what you want and necks HSPL any other rum.
And what the specifics needed?
In Irkutsk, I can also help with reinsertion
come herehttp://www.totalgsm.org/unlock2.html
We read the contents of your imei send mail and receive your unlocker from 2 minutes to 6 hours
Post has been editedPetrovych - 19.01.11, 18:56
We read the contents of your imei send mail and receive your unlocker from 2 minutes to 6 hours
Post has been editedPetrovych - 19.01.11, 18:56
This does not unlock for firmware and to unlock the operator devices, ie, for devaysa tied to a specific operator with other operators Sims.
If your phone is locked to a certain operator network by your carrier, you can unlock it, so it'll work with all other networks. Phones can be unlocked by code or IMEI.Just punch in the code for the phone to be unlocked.
Post has been editedceccato - 14.12.08, 03:53
If your phone is locked to a certain operator network by your carrier, you can unlock it, so it'll work with all other networks. Phones can be unlocked by code or IMEI.Just punch in the code for the phone to be unlocked.
Post has been editedceccato - 14.12.08, 03:53
HSPL works. The only thing to do is rebuild the firmware and removed therefrom regionchek (crap that does not start the device with the flash and Russian Sid different from 07) :)
Post has been editedPetrovych - 19.01.11, 19:00
Post has been editedPetrovych - 19.01.11, 19:00
HARD SPL according to xda ready.
Unsigned_HardSPL_for_Blackstone_OliNex.zip(1.12 MB)
SSPL_Manual_TouchHD.zip(488.96 KB)
Restore_Stock_SPL_114.zip(132.68 KB)
Post has been editedmurzilka20051 - 17.12.08, 10:41
Preparations:
0) this package is for Blackstone devices. for BLAC100 so far (SSPL loader checks this), if your ModelID is different, contact us for testing !!
1) make sure you have .NET framework installed on your PC! if not, get it fromhttp://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended:http://www.microsoft.com/windowsmobi...ce-center.mspx
Instructions:
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile !!!
3) run HardSPLWrapper_Blackstone.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is recommended,
4) follow steps in the RUU, check device for prompts after PC shows loading bar, press Yes on phone if asked.
5) device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
6) in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
7) SPL flashes, device automatically reboots, job done.
8) to confirm you got it installed, go into bootloader mode (tricolour screen!) And verify the screen shows 1.14.OliNex, which is the Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is sayingn 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted in this post as well. use this relocker * only * if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore) !!! nothing other than SPL's made by Olinex team (using OliNex custom cert) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or blackstone customRUU if you need to flash cooked ROM.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
- anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is showing 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
- if you get connection error in RUU after the device goes to 1.07.Olinex screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- if SSPL-Manual.exe or Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
- USB or connection error: as already said, in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait 5 minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process from step 1.
- USB or connection error: alternatively, launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC.
0) this package is for Blackstone devices. for BLAC100 so far (SSPL loader checks this), if your ModelID is different, contact us for testing !!
1) make sure you have .NET framework installed on your PC! if not, get it fromhttp://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended:http://www.microsoft.com/windowsmobi...ce-center.mspx
Instructions:
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile !!!
3) run HardSPLWrapper_Blackstone.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is recommended,
4) follow steps in the RUU, check device for prompts after PC shows loading bar, press Yes on phone if asked.
5) device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
6) in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
7) SPL flashes, device automatically reboots, job done.
8) to confirm you got it installed, go into bootloader mode (tricolour screen!) And verify the screen shows 1.14.OliNex, which is the Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is sayingn 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted in this post as well. use this relocker * only * if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore) !!! nothing other than SPL's made by Olinex team (using OliNex custom cert) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or blackstone customRUU if you need to flash cooked ROM.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
- anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is showing 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
- if you get connection error in RUU after the device goes to 1.07.Olinex screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- if SSPL-Manual.exe or Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
- USB or connection error: as already said, in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait 5 minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process from step 1.
- USB or connection error: alternatively, launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC.
Attached files
Unsigned_HardSPL_for_Blackstone_OliNex.zip(1.12 MB)SSPL_Manual_TouchHD.zip(488.96 KB)Restore_Stock_SPL_114.zip(132.68 KB)Post has been editedmurzilka20051 - 17.12.08, 10:41
neomatroskin @ 17.12.2008, 14:45
Friends of happiness! a scratching algorithm of actions: download (and then I send kudato) that install in the first place, etc. OWL!
1 unpack files in any folder of Unsigned_HardSPL_for_Blackstone_OliNex
2 writes to the device from SSPL_Manual_TouchHD device and run it goes into a state of "mattress"
3 run from the folder where unpacked Unsigned_HardSPL_for_Blackstone_ OliNex HardSPLWrapper_Blackstone.exe
4 then run the firmware that is needed (I put the official Russian)
turtle_spy,
HARD_SPL should be done every time before pereproshivaniem if you last time pierced the official firmware (official firmware sews their SPL and it becomes unpatched). If sews custom firmware - hard_spl not needed.
HARD_SPL should be done every time before pereproshivaniem if you last time pierced the official firmware (official firmware sews their SPL and it becomes unpatched). If sews custom firmware - hard_spl not needed.
gralexon @ 17.12.2008, 4:09
What firmware did you install?
The header see 2 Russian Black ONYX v. 1.0 and BlackStone_HTC_RUS
chichas framework identity in installed and flight =)
The header see 2 Russian Black ONYX v. 1.0 and BlackStone_HTC_RUS
chichas framework identity in installed and flight =)
Put BlackStone_HTC_RUS official (WWE was from Canada) normal flight.
after installing the SPL is not flew from the left OliNex.
FoX373 @ 17.12.2008, 5:19
Tricky question. There are no restrictions on sewing with XP or Vista?
With Vista it is necessary to run everything as Administrator !!!!
To olegvika
Well over quieted have altered SETUP is now again on new :-D
Olinex said:
Training:
0) is the solution for Blackstone (aka HTC_Touch_HD) ustroystv.A more precisely BLAC100 (SSPL loader checks it), if the ID of your model is different, please contact us for testing !!
1) Make sure that you have installed the .NET framework in the big blind if not take it from herehttp://www.microsoft.com/downloads/d...DisplayLang=en
2) If you have Vista, it is recommended to install WMDC update:http://www.microsoft.com/windowsmobi...ce-center.mspx
Instruction:
1) Download Hard-SPL archive of the enclosure, unpack in an empty folder.
2) The device must be synchronized with the BB, ActiveSync icon is green !!!
3) Run the BB HardSPLWrapper_Blackstone.exe, make sure it is launched from a local drive (not from a network drive, etc.). if you have vista, it is recommended to run with administrator privileges,
4) Follow the steps in the RUU, check the device when the BB shows loading bar, click Yes if the device is ever asked.
5) Note: when RUU says it will hard reset performed, do not worry, nothing will happen. Also, when he says that the operation would take 10 minutes, ignore, it will take a minute or so.
6) The device will go into butlodera mode (in common mattress) and should be the inscription SSPL version 1.07.OliNex, which is a temporary phenomenon.
7) take a few seconds until the RUU detects the device, in any case, do not worry if you see at the bottom of the screen "USB" sign, RUU looking for your unit.
8) SPL sew, the device automatically restarts, all the worst is over
9) To ensure that all went well go to butloder (aka mattress) and make sure that there is 1.14.OliNex inscription, which is the Hard-SPL version.
NOTE: What you see in the normal mode boot devaysa, this is not the SPL, this version of the operating system!
To check the SPL, the device is completely turned off by long pressing the power button, then hold down the "volume down" on the left side of the machine, turn on the device. Continue to hold the Volume Down button until butlodera, then check the version.
NOTE 2: If someone has a problem with the automatic transfer device in SSPL mode, please copy SSPL-Manual-TouchHD.exe of SSPL-Manual-TouchHD.zip of the enclosure on the device and run. after when the screen appears nadpis1.07.OliNex, run RUU manually (in the BB of course). or run the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) in the big blind and sew
NOTE 3: This unsigned Hard-SPL. There are no restrictions on firmware ROMs or radio, it also removes the formal protection HTC RUU's, so if someone wants to return all nazat as (for example for reasons of security), original SPL daungreyd pack is in the enclosure. Use this solution only when necessary, and only after flashing the device to the original firmware and radio.
NOTE 4: Do not use this RUU for something other than SPL flashing (and hardspl or stock spl restore) !!! Nothing but the SPL's made Olinex (used OliNex custom cert) that will make SSPL firmware safer. If you want to flash any ROM, use shipped RUU or blackstone customRUU if you want to flash a custom ROM.
: thank_you:
P.S. I do not have time to edit the old message requesting the modders to remove it !!!
Unsigned_HardSPL_for_Blackstone_OliNex.zip(1.12 MB)
SSPL_Manual_TouchHD.zip(488.96 KB)
Restore_Stock_SPL_114.zip(132.68 KB)
Training:
0) is the solution for Blackstone (aka HTC_Touch_HD) ustroystv.A more precisely BLAC100 (SSPL loader checks it), if the ID of your model is different, please contact us for testing !!
1) Make sure that you have installed the .NET framework in the big blind if not take it from herehttp://www.microsoft.com/downloads/d...DisplayLang=en
2) If you have Vista, it is recommended to install WMDC update:http://www.microsoft.com/windowsmobi...ce-center.mspx
Instruction:
1) Download Hard-SPL archive of the enclosure, unpack in an empty folder.
2) The device must be synchronized with the BB, ActiveSync icon is green !!!
3) Run the BB HardSPLWrapper_Blackstone.exe, make sure it is launched from a local drive (not from a network drive, etc.). if you have vista, it is recommended to run with administrator privileges,
4) Follow the steps in the RUU, check the device when the BB shows loading bar, click Yes if the device is ever asked.
5) Note: when RUU says it will hard reset performed, do not worry, nothing will happen. Also, when he says that the operation would take 10 minutes, ignore, it will take a minute or so.
6) The device will go into butlodera mode (in common mattress) and should be the inscription SSPL version 1.07.OliNex, which is a temporary phenomenon.
7) take a few seconds until the RUU detects the device, in any case, do not worry if you see at the bottom of the screen "USB" sign, RUU looking for your unit.
8) SPL sew, the device automatically restarts, all the worst is over
9) To ensure that all went well go to butloder (aka mattress) and make sure that there is 1.14.OliNex inscription, which is the Hard-SPL version.
NOTE: What you see in the normal mode boot devaysa, this is not the SPL, this version of the operating system!
To check the SPL, the device is completely turned off by long pressing the power button, then hold down the "volume down" on the left side of the machine, turn on the device. Continue to hold the Volume Down button until butlodera, then check the version.
NOTE 2: If someone has a problem with the automatic transfer device in SSPL mode, please copy SSPL-Manual-TouchHD.exe of SSPL-Manual-TouchHD.zip of the enclosure on the device and run. after when the screen appears nadpis1.07.OliNex, run RUU manually (in the BB of course). or run the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) in the big blind and sew
NOTE 3: This unsigned Hard-SPL. There are no restrictions on firmware ROMs or radio, it also removes the formal protection HTC RUU's, so if someone wants to return all nazat as (for example for reasons of security), original SPL daungreyd pack is in the enclosure. Use this solution only when necessary, and only after flashing the device to the original firmware and radio.
NOTE 4: Do not use this RUU for something other than SPL flashing (and hardspl or stock spl restore) !!! Nothing but the SPL's made Olinex (used OliNex custom cert) that will make SSPL firmware safer. If you want to flash any ROM, use shipped RUU or blackstone customRUU if you want to flash a custom ROM.
: thank_you:
P.S. I do not have time to edit the old message requesting the modders to remove it !!!
Attached files
Unsigned_HardSPL_for_Blackstone_OliNex.zip(1.12 MB)SSPL_Manual_TouchHD.zip(488.96 KB)Restore_Stock_SPL_114.zip(132.68 KB)©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement