Haylou GT1 / GT1 Pro / GT1 Plus - Discussion | [BT-Headphones]



Rep: (24)
Haylou GT1 / GT1 Pro / GT1 Plus - Discussion
Xiaomi Haylou GT1 / GT1 Pro / GT1 Plus
Official site | Discussion пїЅ

Attached Image

Other photos
Attached Image
Attached Image
Attached Image

Description
Bluetooth 5.0, a strong wireless signal. You can enjoy music on the 10-meter working distance. Touch screen controls for easy use. Excellent sound quality. Thanks to the intelligent noise reduction technology DSP device can transmit high-quality music and pleasant listening to compatible devices. IPX5 waterproof design, feel free to use the headphones on a rainy day and the gym. Ergonomically designed and comfortable to wear for a long time wearing, do not fall out when running. Compatible with iOS and Android devices. With portable charger, your headphones always maintain a full battery charge. And it is necessary for driving, work, sports, indoors and outdoors.

Fast connection
Chipset with support for Bluetooth 5.0 will provide you a pleasant use without connection losses.

Voice assistant
Triple tap on the headset to activate voice assistant that helps you manage your smartphone.

Listen to a lot of
Capacious battery will provide listening to your favorite music on 3.5 hours, and with a special carrying case GT1 will provide you with 12 hours in use.

epic harmony
This small earphone is 7.2mm driver sensitive microphone, the membrane of a polymeric resin, Bluetooth 5.0 and DSP technology. Enjoy surround sound with a pleasant bass clean medium and high frequencies, as well as soft precise stereo sound when speaking.

Enjoy clear sound
Support intelligent noise reduction technology DSP chip GT1 eliminate background noise for comfortable use headphones.

Device characteristics
Chipset
  • GT1, GT1 Pro - Realtek
  • GT1 Plus - Qualcomm QCC3020

Main settings
Frequency - 20-20000 Hz
Sensitivity - 110 dB
Impedance - 32 ohms

Design
  • GT1, GT1 Plus
    • 7.2mm diameter driver
    • Display - LED on the headphones

  • GT1 Pro
    • 7.2mm diameter driver
    • Display - LED on the headphones, 4 LEDs on the battery carrying case

Wireless connection
  • GT1, GT1 Pro - Bluetooth 5.0, A2DP profiles, AVRCP, HFP, HSP, Codecs SBC, AAC
  • GT1 Plus - Bluetooth 5.0, A2DP profiles, AVRCP, HFP, HSP, SBC codecs, AAC, AptX

Nutrition
  • GT1, GT1 Plus 43mAch earphone, case 310mAch
  • GT1 Pro 43mAch earphone, case 800mAh
Functions
Voice dialing, play / pause the media, the media scrolling forward / back, answer / end a call, automatic pairing.

Additional Information
The weight of one earphone - 4 g; Waterproof IPX5 standard; DSP noise reduction technology; the ability to use one earphone.

Equipment
Headphones (left, right), the charging case, two extra pairs of ear cushions (small and large), power cable USB-A - micro USB, instructions (Chinese and English).

Dimensions
  • earphone - B / L / W 12mm / 20mm / 12mm, 10mm sound guide
  • Case
    • GT1, GT1 Plus - B / L / W 25mm / 75mm / 30mm
    • GT1 Pro - B / L / W 32mm / 75mm / 35mm
Colour
  • GT1 Pro, GT1 Plus - the black
  • GT1 - black White

Useful

Reviews


  • Before asking a question, use search by topic . Respect your and other people's time.
  • To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

No topic Curator . If the subject is, a user who wants to become a Curator and correspondingRequirements for candidatesHe may apply,Post New Topicin sectionI want to beCurator (having previously studied Rules and guidelines forCurators ).
Prior to his appointment
Curator, For filling caps, please contactModeratorssection or a buttonPictureunder the messages to which you want to add links.


Post has been editeddjeksonst - 17.05.20, 13:19
Reason for editing: Extras. Photo of the disassembled earphone



Rep: (24)
Differences headphone modifications
Comparison Chart headphone modifications

Headphone packaging options (GT1, GT1 Pro)
Attached Image
Attached Image

Original headphones and Haylou GT1 GT1 Pro can have these kinds of design packages. Modification GT1 Plus is supplied only to the second kind of packaging.


How to distinguish a modification of headphones?
  • Version GT1 ProIt has a higher charging case and 4 charge indicator on it.
  • Version GT1 PlusHas ties AptX standard connection settings.


Post has been editeddjeksonst - 09.04.20, 17:48
Reason for editing: Ed.



Rep: (24)
Answers to frequently asked questions [F.A.Q.]

Q: Why, after buying the headphones are not charged from the briefcase?
A: From the factory to the headphones pasted protective film on the contacts for charging, remove them. If you have removed them, try to charge the case. Otherwise, you have a defective copy.

Q: Why after buying a case is not being charged and / or charging the headphones only when you connect the charging cable?
A: Perhaps the case is in a state of deep discharge, leave the case to charge for a while. Otherwise, you have a defective copy.

Q: Why when using headphones appear periodically breaks?
A: In crowded places disconnects are relatively standard for wireless headphones. If gaps occur everywhere, try changing program of music playback. If you are using a headset, try keeping both earbuds included.

Q: Why does music in one ear behind the other?
A: An earphone out of sync. It is recommended to make a headphone factory reset.
Important!On GT1 only modification right earpiece can be displayed at a BT-device search, it's okay.
Instructions for resetting to factory settings headphones
Important!Before you start, make sure both the headset charged and disconnected from your device.
  1. Turn off both the earphone retention touch button for 5 seconds
  2. Keep the touch buttons on both earphones, wait until the headphones twice served signals LEDs blink red and white, then release the button (the process takes about 16 seconds)
  3. Place both headset in the charging case for a few seconds
  4. Remove the headphones from the battery of the case
If the actions of claim 6 LED continues to blink on both ears, repeat the reset process again.

Video instruction


Post has been editeddjeksonst - 07.05.20, 21:26
Reason for edit: Updated user reset



Rep: (401)
djeksonst @ 05.02.20, 14:27*
Instruction
Choate does not help. connected individually and in stereo nothing :(



Rep: (24)
* d -_- b , From one set of headphones?



Rep: (401)
Yes



Rep: (24)
* d -_- b,
After resetting the earphones must initially zakonnektitsya each other, then when searching devices (Earphone when both included) to be displayed only right earpiece. If after resetting (when both earphone included) are both displayed as search earphone devices, it is necessary to repeat the reset procedure.
Try the reset headphones on video instructions (referred to in F.A.Q. under spoiler)

Post has been editeddjeksonst - 06.02.20, 13:21
Reason for editing: Extras.



Rep: (401)
djeksonst @ 05.02.20, 14:27*
Turn off both the earphone retention touch button for 5 seconds
when off, they light up red?
djeksonst @ 05.02.20, 14:27*
twice served signals LEDs blink red and white
served, but not at the same time - it is not critical?
djeksonst @ 06.02.20, 13:20*
It should be displayed only for the right earpiece
every time are displayed separately how many attempts sbosa not doing



Rep: (24)
* d -_- b, When you turn off the LED lights up red; they blink depending on when you started to hold the touch button, ie not critical. Home after reset enable them to establish communications with each other (i.e. necessarily after resetting put both earbuds in case, hold them there are 5 seconds, to get both earbuds out of the case, to wait when both blinked white, then will blink only one. Only then can try to connect the headphones to the device)



Rep: (401)
It turned a few attempts. earned



Rep: (24)
* d -_- b,
Great! You may suggest that it could not happen again, please?

Post has been editeddjeksonst - 06.02.20, 14:14



Rep: (401)
djeksonst @ 06.02.20, 14:12*
that it could not happen at first
FIG knows. like everything is done to the letter of instruction, and worked not immediately
may, after each stage it is necessary to wait a little longer than 5 seconds, maybe the features of the smartphone

a smart way on one (XRN8P) _R displayed as ears and the other (liagu M11) the same light as headphones ..._ R (LE)

Post has been editedd -_- b - 06.02.20, 14:18



Rep: (0)
Prompt, where the pros can be bought at an adequate price list .. not available at Alix (



Rep: (24)
* Pimp94,
Is onJdandEbay, At the expense of originality can not say anything.



Rep: (838)
djeksonst @ 06.02.20, 21:24*
at the expense of originality can not say anything

On JD exactly original. Seller senceglobal reliable. Havit took several pairs at one time. Everything was fine.



Rep: (6)
On bluetooth 4.2 yuzal who these headphones? Cliffs there?

And the question is, without EQ these ears heard? On the phone you can not put the equalizer unfortunately

Post has been editedheavenlight - 16.02.20, 09:34



Rep: (24)
* heavenlight, on Sinezubov 4.2 works well in very crowded places may be gaps (I). Without equalizer sound good, bass is not jammed, high enough.



Rep: (6)
* djeksonst As well as a microphone? A usable?



Rep: (24)
* heavenlight, he did not use the microphone, you can hear examples of the microphone in the video review of the cap (1 link) at timecode 3:35



Rep: (6)
More time, what are the differences between a fake from the original?



Rep: (24)
* heavenlight Reviews about tampering with the Internet is not seen, but the marriage enough reviews

Post has been editeddjeksonst - 26.02.20, 20:32
Reason for editing: Ed.


Full version    

Help     rules

Time is now: 20/05/20, 05:30