Discussion chamber Xiaomi Redmi Note 8 / 8T



Rep: (235)
Discussion chamber Xiaomi Redmi Note 8 / 8T
Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Camera talk пїЅ |

Camera specifications
Back camera - 4 modules.
The main module Samsung S5KGM1
  • Resolution - 48 MP 8000h6000
  • Aperture - f / 1.79
  • Number of elements - 6 (sunny or ofilm)
  • Focal Length - 4.74
  • Sensor Size - 6.43h4.83
  • The pixel size - 0.8 mm (1.6 in SuperPixel mode)

Wide-module OmniVision OV8856
  • Resolution - 3264x2448 8MP
  • Aperture - f / 2.2
  • Viewing Angle - 120
  • Auto focus - No

Macro module OmniVision OX02A10
  • Resolution - 2MP 1600x1200
  • The aperture - f / 2.4
  • Autofocus - Yes
  • Focal Length - 1.94

depth field sensor GalaxyCore GC2375
  • Resolution - 2 MP 1600x1200


The front camera OmniVision OV13855
  • Resolution - 13 megapixel 4224x3136
  • Aperture - f / 2.0
  • Focal Length - 3.51
  • Sensor Size - 4.75h3.53
  • Pixel Size - 1.12 microns
  • Auto focus - No


video recording modes
  • 4K UHD 3840h2160 - 30FPS
  • FullHD 1920x1080 - 30FPS
  • FullHD 1920x1080 - 60FPS
  • FullHD 1920x1080 - 120FPS
  • HD 1280x720 - 30FPS
  • HD 1280x720 - 120FPS
  • HD 1280x720 - 240FPS

Instructions / Useful
Camera applications


The curator of the topic isKillercats, on filling caps, contact QMS


Post has been editedKillercats - 08.01.21, 22:12
Reason for editing: TRCamera Xmas Release



Rep: (13)
Rekiarts @ 14.08.20, 07:35*
everything works except saving macro photo

And could you suggest this chamber? Does not make a snapshot in the night mode, throws out of the program and does not save the picture: thank_you:



Rep: (15)
bvi1973 @ 12.01.21, 20:44*
everything works except saving macro photo

And could you suggest this chamber? Does not take a picture in night mode, throws out of the program and does not save the picture

I use it only for chickens, as the modules set up above, it seems to be the seed settings did not touch, right now I checked in the night mode. Save in normal, too, all modules except macro, macro still does not save well, I have not done anything too laziness and so far I do not need to fly something at the urgent one. The firmware is still China Stoke's last that at 9 Drochda for 10 hours I also do not update and so that there is still no norms)) to help so that they can hardly ((firmware and modules can be different so that the ODA and the same camera can work In different ways you have and me ...

Post has been editedrekiarts - 12.01.21, 18:41



Rep: (65)
* rosolovsky What firmware 10 android put?



Rep: (65)
* MaximStormila,
Havocos 3.12.



Rep: (65)
* rosolovsky why, there, in the same port of the Camera



Rep: (65)
* MaximStormila, Yes * MaximStormila,
Yes, there was Miui Camera, and I put Anx for the purpose of the experiment, I wanted to see :)



Rep: (366)
* VEX #, Not on the subject of course, but did you try to install the "Hardware Off" module?



Rep: (36)
* feto Indeed) in the horque Topics. Fingerprint and so in Basic mode, and the problem was not alone, in the theme of magic a lot of messages on this topic.



Rep: (366)
* VEX #, Also there was a problem until this module installed.



Rep: (1)
Good afternoon! Please tell me what better version of the GCAM and config establish? Firmware MIUI PULSE 12.1 QCXMIXM



Rep: (210)
On the trial, the last tiger, the Libe R0m10, corrected the patcher under 8t, wigs and macro as in stock, config to this version.

Attached filetrcamera_xmas_r0m10.apk.(90.53 MB)

Attached fileRVD.82_tigr_xmas_r0m10.xml.(23.35 KB)


Attached images
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedRVD.82 - Yesterday, 20:39


Full version    

Help     rules

Now: 14.01.21, 03:22