[X]Assistant

[acventus]

ZTE Nubia Z18 Mini - Firmware (OS 8.1.0)

Description | Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

Installing a device driver

The drivers are present on the device, installed from a CD, which is mounted when the device is connected to the computer via a USB Type-C cable in charging mode.

Official firmware

http://ui.nubia.cn/rom/detail/52

Unofficial firmware

Miui_nx611j

https://cloud.mail.ru/public/9piJ/Mueq4ZUdfandinstallation instruction

Instructions

Installing the driver, installing the official firmware, installing TWRP 3.2.1, installing the playmarket, installing the rights of root through Magisk

https: //www.chinahandy…laystore-not-reliable/

TWRP 3.2.3 and installation instructions

https: //forum.xda-deve...ecial-edition-t3853238

miscellanea

There is no curator in the subject. For questions about filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedacventus - 10.03.19, 17:24

[acventus]

Installation Instructions TWRP-3.2.3.

1.We assume that you have the firmware and drivers installed (if anything, then there is a disk on the phone with drivers, install, the disk is mounted in charging mode, start it and install it).
2. Create a folder in the root of the C drive, let's call itTWRP18mini and unpack the archive into it Attached file TWRP-3.2.3-1009-NUBIA_Z18_MINI-CN-wzsx150-fastboot.7z (22 MB)


3.We go in on the phone insettings-about phone-build number, we tap on the build number several times before appearing in the settings menu for developers (appear inother system settings).
4. Go tosettings-other system settings-for developersand turn on the factory unlock, debug via USB, select MTP in USB configuration. Turn off the device and simultaneously press the volume down button and the power button to enter the menu (fastboot).
5.Connect the device.
6. Let's go to diskC / TWRP18miniAnd run the batch file打开 CMD 命令 行 .batas a result, we find the folder and the command line appears.
7. Copy and paste into the command line

fastboot oem nubia_unlock NUBIA_NX611J download

We pressEnter.
8. Copy and paste into the command line.fastboot flash recovery recovery-TWRP-3.2.3-1009-NUBIA_Z18_MINI-CN-wzsx150.imgWe pressEnter.
9.recovery-TWRP-3.2.3 is installed, scroll through and click Reboot to recovery mode (boot into new recovery) or Reboot system now (boot into the system). The + -Volume-navigation button on the menu, the power-select button.

p.s It seems like point 3 and 4 can not be performed, but simply "Turn off the device and simultaneously press the volume down button and the power button to enter the menu (fastboot)".
You can also install TWRP-3.2.3 through TWRP-3.2.1 through this archiveTWRP-3.2.3-1009-NUBIA_Z18_MINI-CN-wzsx150.zip(20.31 MB)
And with the help of the utility if there is a root directly from the firmwarerecovery-TWRP-3.2.3-1009-NUBIA_Z18_MINI-CN-wzsx150.rar(20.26 MB)
TWRP is pre-unpacked from the archive and placed in the device's memory.

Post has been editedacventus - 10.03.19, 17:14

[acventus]

Miui_nx611j_8.11.1Initially in English. Language, when translating the menu-settings, it remains in English. and a couple more apps.
Download

Description

Judging bybuild.prop the Chinese ported her with MI MAX 3 that is quite real (since 636, it seems, our 660 processor's younger brother).

Firmware screenshots

Installation method

It is installed through TWRP-3.2.3 (it is possible through all our TWRPs, but I installed it through this). Before installation, go toWipe-Advanced Wipeand tick the Dalvik / ART Cache, Data, Cache, System and hold bySwipe to Wipe

Installing Google Services

Installing Google services through1-google-installer.apk(167.27 KB)
We install the arch itself and then simply install all the services and the store through the application. Well, we also give those permissions that we ask.

Russification firmware

Instructions for Russification

Setting up notifications and background applications (For all devices on MIUI)

Read here

About launching gullcameras

Read here
I just made us a patch, we release from under TWRPGcam_patch.zip(182.72 KB)
This is just a build with the specified strings, so as not to bother once again, but we try to select the cameras for our device ourselves.

Getting root rights to the firmware

Ruth got throughMagiskand patch to reset password lockRemoving_password_Patch.zip(124.62 KB)
, after installing Magisk-v18.1.zip boot again in recovery, reset the lock password with the help of this patch

P.sIf, where either made mistakes or not accuracy, then write in a personal-fix.

Post has been editedacventus - 10.03.19, 20:11

[gtr86]

acventus
It is probably worth pointing out that the current MIUI firmware is not suitable for everyday use due to the presence of bugs.

[Iuriius]

gtr86 @ 03.11.19, 00:05

current MIUI firmware is no good

Have you tested it yet?

[acventus]

gtr86 @ 03/10/19, 19:05

It is probably worth pointing out that the current MIUI firmware is not suitable for everyday use due to the presence of bugs.

Lay out a list of bugs, I approach the post, I did not test much, but it seems that only their EQ does not work. I have been on it for several days .. I haven’t yet seen any cyclic rebuses and dependencies.

Post has been editedacventus - 10.03.19, 19:11

[gtr86]

Pre-translation of stock firmware 2.33
Added: interface, settings, camera, dialer (+ slightly enlarged photo), contacts, messages, NeoSafe, name of ringtones.
Install via TWRP.
2.33-rus.zip(125.29 MB)

[shurik1274]

I can not install twrp, maybe there are some pitfalls, I tried with w8 and w10.
Maybe someone stumbled will tell.

Post has been editedshurik1274 - 20.03.19, 06:36

[acventus]

shurik1274 @ 03/19/19, 11:53

Can not install twrp

So install it usingFlashifyjust root the firmware. ImagehereJust remove it from the archive and place it in the memory of the smartphone.

Post has been editedacventus - 20.03.19, 11:01

[gtr86]

acventus
A vicious circle is obtained. For Flashify, you need root, for root, you need twrp.

[acventus]

gtr86 @ 03/20/19 5:30

acventus
A vicious circle is obtained. For Flashify, you need root, for root, you need twrp.

Well, I finally thought that the people at least the first 3.2.1 managed to install, but this does not work out 3.2.3 ... or maybe he, like me, reread the forum for half a day to understand that there are not enough lines from the instructionthisin the thread "Discussion". And all the pitfalls, so to speak, only from not carefully reading the instructions, the very rules of the manual in English in the header, google translator is ...

[shurik1274]

What's wrong?

Attached images

[igorilla009]

after the doptransfer of the stock firmware 2.33 the camera disappears and the gallery does not want to work

Post has been editedigorilla009 - 23.03.19, 12:50

[acventus]

igorilla009 @ 03/23/19 12:48

after the doptransfer of the stock firmware 2.33 the camera disappears and the gallery does not want to work

Sew itfrom here, also from under TWRP.

[igorilla009]

thanks, all worked well

[acventus]

It seems a small update package came out (I can not check it yet on miui)Nubia UI V2. 36 . At the forum they say.

Nubia UI V2. 36. The official version for Z18mini (NX611J) has been enabled for small batches of FOTA push, push objects for partially randomly selected users. If the unintentional subsequent full push update, the cowboy has not received updated tips, please be patient!

/ Notes пјљ
в—Џ Before updating, make sure that the phone is sufficiently charged and backup phone data (we recommend using your own backup software) to avoid losing phone data during the update пј›
в—Џ Before updating, please cancel all kinds of screen lock, update process, make sure the phone is flat, and do not hesitate to touch the screen, follow the on-screen instructions to work
в—Џ If you have root access, make sure you remove root access, go back to normal and restore the factory settings before upgrading, otherwise it may cause the upgrade to fail пј›
● This small package only supports updates via FOTA: click “settings” ->"system updates" ->"check for updates", download the update package after the update is completed ；
в—Џ Problems arising from use can be obtained by using feedback in the Feedback section of the forum product.


/ Update log пјљ

Connection
Fixed: problem with partial rewind of SMS messages

Media
Optimized for: calf voice experience

Instruments
Fixed: Red Pack Assistant crash

Settings
Fix: Bluetooth 5. 0 headset connection problems
Fixed: unable to cancel the save after pairing some bracelets

Optimization of this update includes, but is not limited to, the elements listed above.

Post has been editedacventus - 27.03.19, 13:59

[crownn]

Good day to all!
Tell me, with which version of the firmware the phone is sold in Russia?

[tal1]

acventus

I apologize, I corrected the text a bit.
The official version of the Nubia UI V2.36 for Z18mini (NX611J) includes a small FOTA push package.
If there is no conflict, a full forced update will be performed. If the user has not received an update reminder, please wait patiently!

Note:
в—Џ Before updating, make sure the mobile phone is fully charged,
в—Џ Back up your mobile phone data (we recommend using the built-in backup software)
to avoid loss of mobile phone data during the update process;
в—Џ Before updating, cancel all kinds of screen locks. Do not forget to place the phone on a flat surface during the update process.and do not touch the screen at will,
follow the instructions on the screen;
в—Џ If you have been granted root privilege, you must remove root privilege, restore the version to its normal state and restore the factory settings before updating,
otherwise, the update may fail.
в—Џ This small package only supports updating via FOTA update:
Click "Settings" ->"System Update" ->"Check for updates" and then perform the update after downloading the update package;
в—Џ Problems arising from use can be directed to the forum site in the product reviews section.

[babazina1111]

Nothing new happened?

[jin30]

Good day. I met a problem, gps will not determine where I am, Yandex, Google. Also, the clock does not show the year and date, and the time shows China. Can anyone solve this problem? or is it just me.

[VADIM 71]

Hello! Who is sitting on the miui, after transferring through the sealokal, a lot of English remains?