Discussion chamber Samsung Galaxy S10e / S10 / S10 + (Exynos)
. If you have less than 15 posts - click on the button.
under the message where they helped you, and write thanks."Many people write that the camera module in s9. Where this information is available? In the official sources?"
Samsung SM-G960 Galaxy S9 / SM-G965 Galaxy S9 + - Discussion
Rear S9 + - Dual: 12 MP (f / 1.5-2.4, 26mm, 1 / 2.55 ", 1.4 Ојm, Dual Pixel PDAF) + 12MP (f / 2.4, 52mm, 1 / 3.6", 1 Ојm, AF), OIS, phase detection autofocus, 2x optical zoom, LED flash
Samsung SM-G960 Galaxy S9 / SM-G965 Galaxy S9 + - Discussion
Rear S9 + - Dual: 12 MP (f / 1.5-2.4, 26mm, 1 / 2.55 ", 1.4 Ојm, Dual Pixel PDAF) + 12MP (f / 2.4, 52mm, 1 / 3.6", 1 Ојm, AF), OIS, phase detection autofocus, 2x optical zoom, LED flash
I noticed that when you add a club card in the camera is turned on spay Shirikov. Is always. The more the quest to remove the card from a distance of 20cm. on Shirikov.
I take a picture of last night ...
the phone certainly looks better than on the computer.
auto mode. optimization of the frame left icon "auto"
Post has been editedkupiatlas - 12.03.19, 13:58
the phone certainly looks better than on the computer.
auto mode. optimization of the frame left icon "auto"
 |
Post has been editedkupiatlas - 12.03.19, 13:58
max-pax @ 03/11/19, 16:18
With your permission, I'll throw off a couple of photos with a width:
DD super. But squelch killed all the branches and needles on elkah even without Kropa seen: nea:.
Shumodav in CAMCE disconnected?
Attached images
Post has been editedsj0777 - 12.03.19, 14:35
INFA for camera sensors:
G975F
Rear:
main:SLSI SAK2L4 - 12 MP, maks.freymreyt - 480, bit depth - 10
Shirikov:SLSI S5K3P9 - 16 Mn maks.freymreyt - 120 bitnost - 10
tele:SLSI S5K3M3 - 12 Mn maks.freymreyt - 120 bitnost - 10
Frontal:
main:SLSI S5K3J1 - 10 Mn maks.freymreyt - 240 bitnost - 10
add:SLSI S5K4HA - 8 Mn maks.freymreyt - 120 bitnost - 10
Post has been editedPako777 - 12.03.19, 14:43
G975F
Rear:
main:SLSI SAK2L4 - 12 MP, maks.freymreyt - 480, bit depth - 10
Shirikov:SLSI S5K3P9 - 16 Mn maks.freymreyt - 120 bitnost - 10
tele:SLSI S5K3M3 - 12 Mn maks.freymreyt - 120 bitnost - 10
Frontal:
main:SLSI S5K3J1 - 10 Mn maks.freymreyt - 240 bitnost - 10
add:SLSI S5K4HA - 8 Mn maks.freymreyt - 120 bitnost - 10
Post has been editedPako777 - 12.03.19, 14:43
Guys, tell me please, on the main camera when shooting video (normal mode / without stabilization "palm" / FHD video size 60 frames) - should auto focus work? I drive the camera from subject to subject - glows from above af-l. Even in ordinary FHD (not 60 frames) - it glows on top of af-l, with your finger the focus changes to the desired subject ...
Pashacvet @ 12.03.19, 17:56
I wanted to see, and then there raschveli booth, modules tvkiezhe as in nine
onnote9The main camera has almost the same sensorSLSI SAK2L3 , Different from L4 minimal - it is a different processing delays and superlayers Motion
Post has been editedPako777 - 12.03.19, 15:03
Pako777 @ 12.03.19, 15:42
INFA for camera sensors:
From infa?
Found here is the page with the same information:https: //www.devicespec...editor-review/d1fc9b/8
There are examples and a video, and photos have
But how reliable source I can not say
here are a couple of pictures. Shirikov and usual in the auto mode.
C10 normal.
for me it is not bad. not much of the old xc different max.
C10 normal.
for me it is not bad. not much of the old xc different max.
 |
 |
prostopo4t @ 12.03.19, 18:06
From infa?
from a raw core
empathy @ 12.03.19, 18:29
A squeeze 960
look yet, but off.infa in the core as long as such. Quite possibly it implemented in other ways
PS .. I looked. Code of 960 is present. How to sell - xs, laziness to understand. Basic info code on the sensor as follows:
module->sensor_id = SENSOR_NAME_SAK2L4;
module->subdev = subdev_module;
module->device = pdata->id;
module->client = NULL;
module->active_width = 4032;
module->active_height = 3024;
module->margin_left = 0;
module->margin_right = 0;
module->margin_top = 0;
module->margin_bottom = 0;
module->pixel_width = module->active_width;
module->pixel_height = module->active_height;
module->max_framerate = 480;
module->position = pdata->position;
module->bitwidth = 10;
module->sensor_maker = "SLSI";
module->sensor_name = "SAK2L4";
module->setfile_name = "setfile_2l4.bin";
module->cfgs = ARRAY_SIZE (config_module_2l4);
module->cfg = config_module_2l4;
module->subdev = subdev_module;
module->device = pdata->id;
module->client = NULL;
module->active_width = 4032;
module->active_height = 3024;
module->margin_left = 0;
module->margin_right = 0;
module->margin_top = 0;
module->margin_bottom = 0;
module->pixel_width = module->active_width;
module->pixel_height = module->active_height;
module->max_framerate = 480;
module->position = pdata->position;
module->bitwidth = 10;
module->sensor_maker = "SLSI";
module->sensor_name = "SAK2L4";
module->setfile_name = "setfile_2l4.bin";
module->cfgs = ARRAY_SIZE (config_module_2l4);
module->cfg = config_module_2l4;
Post has been editedPako777 - 12.03.19, 18:51
Who compared the slow motion in the s9 and s10? There is a difference?
Feeling that s9 even better slawmo
Feeling that s9 even better slawmo
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement