Magicsee N5 Max [S905X2] [Android] | [TVBox] [Amlogic S905X2]



Rep: (48)
DiscussionMagicsee N5 Max [S905X2]
Tv box
Discussion пїЅ
Specifications
OS Android 8.1
Amlogic S905X2 Quad-core 64-bit ARMВ® Cortex в„ў -A53 CPU
GPU ARM Dvalin MP2 GPU (Mali-G31 MP2)
RAM DDR4 4GB
ROM eMMC flash 32GB / 64GB
WiFi 2.4GHz / 5GHz IEEE 802.11a / b / g / n / ac ---Single-stream spatial multiplexing up to 433.3 Mbps data rate (from AP6255 Datasheet)
Bluetooth V4.0 + EDR with Class 1 PA and Low Energy (BLE) support (from AP6255 Datasheet)
Ethernet 100M / 1000M
USB ports 1 * USB2.0 host + 1 * USB3.0 OTG
TF card slot For Micro SD card (TF card)
HDMI 2.1
A / V OUT
SPDIF digital audio
Power Supply 5V2A DC
===
Packing List:
- N5MAX TV BOX
- HDMI Cable
- Remote control (w / o batteries)
- manual
- Power adapter
- Giftbox
A photo
Attached Image
Attached Image

From the manufacturer: Description of the model. Firmware, instructions and programs for firmware. Tips / Howto's
Useful


K
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.


Post has been editedmihadom - 03.07.19, 10:09
Reason for editing: Android 9 firmware for 4 / 32-64Gb (N5MAX_MT138B_4GB_upgrade_package_20190516



Rep: (2)
Selova @ 02.16.19, 21:45*
not expensive

Where ordered and for what price?



Rep: (3)
You can check if the optical output is working. Does sound 5.1 come from the next topic X96max. We have a problem with this.



Rep: (3)
I am purely because of the firmware. This is clone X96Max. Problem with SPDIF output. The diode is on, but the sound is not going.

Post has been editedAL67SH - 02.03.19, 14:18



Rep: (473)
Selova @ 03/06/19 18:18*
3) write in build.prop last line: sys.initd = 1

What is this for? Do any programs check this?

Posted on 03/07/2012, 5:27 PM:

Open the file Generic.kl using the built-in text editor.
The value of the key with the name key28 c DPAD_CENTER on ENTER is correct.

You just need to keep in mind that after that the central button (OK) on the remote control will stop working.
Some programs only respond to DPAD_CENTER. In particular, when entering text through the on-screen keyboard.



Rep: (3)
* selova
Please tell me how to create these 2 files in a tv box?
Transmission does not start after reboot. Maybe it will help.



Rep: (3)
* selova
Thank you.
What then is responsible for saving the settings and autostart transmission bts after a reboot?
The file prefs.xml where it should be and for what it is responsible in the transmission?

Post has been editedAlfanat - 11.03.19, 16:24



Rep: (3)
* selova
He asked - they are silent.
After rebooting, the folder with the file disappears. Ruth is.



Rep: (3)
A bunch of shoveled. With the web interface, autostart, I did not find a bug-free one.



Rep: (0)
Hello everyone.
Bought it a box. In the box, I checked everything - everything works. Only SPDIF did not check - there is nothing.
Remote: some buttons do not work, but I do not use it. Without it, it is inconvenient to use a blue-toothed mouse to click some yes-no buttons in the settings.

Now the question is: in this box, android 8.1.0 and the menu with squares, to which I have a very strong dislike (I personally have such a personal dislike for the victim that I cannot eat ... (c)), you can somehow replace it with a normal one with icons status bar and other buns?

Thank.



Rep: (0)
Thank you so much! Great!
Such detailed instructions!
After you answered, I started poking around - it turns out the status panel, navigation bar and starter, all individual programs .. (Opening for me!)

I tried MS Launcher, Nova Launcher and Super S9 as well. Today, your work is minimalistic and functional!
I also installed a navigation bar, tried a couple of status panels, but none of them seemed to be .. "We will look for (c)"

Thank you so much!



Rep: (0)
Hello. I purchased this tv box n5 max 4 / 64gb, yesterday I took it. Planned to use 4k content from NAS from local network
When testing my library 4k, a problem was discovered, perhaps it is known, but I did not find any mention of it.
When playingof some 4k video in all players below a bar appears on top of the video, which partially closes the navigation panels in the players.
The bottom line:
-band appears on any player (kodi, mx, vlc) and does not disappear throughout the film, in the app info about the video that comes with the strip and which is normal on this box
-checked, on android phone in any player, all video goes fine without any stripes below
- the band may be highlighted depending on the video near the border of the band - how to explain how to ambilight on TV Phillips
- it is noticed that the band disappears when in the mx player you select the SW decoder, but the video is terribly slow. Return HW decoder returns strip.
- changed the magicsee n5 max firmware to the last one, tried to flash beelink gt mini (s905x2) - the box started working on beelink, but the strip also remained. Returned native firmware
- tried to play the video from the network (NAS), recorded on the memory of the box (4/64) - does not depend, the band remains
- monitors tried different, 4k, fullHD TV, different HDMI 2.0 cables - no difference - the strip is present

in the attachment of pictures and mediainfo, the bad label is where the problem is. The picture is bad and ok from the camera, as the print screen of the screen (PrintScr) shows that there is no strip, only on the screen you can see it
What can it be possible to treat?

Attached images
Attached Image
Attached Image


Attached files

Attached fileAlpha_bad_mediainfo.txt(13.36 KB)
Attached fileBlade_ok_mediainfo.txt(15.82 KB)


Post has been editedraw-2015 - 17.03.19, 14:53



Rep: (0)
Using the method of comparisons and settings, I realized that this is some kind of hw decoder bug, scaling or format conversion. The band appears on the video non-standard (not 16: 9) proportions of the video format. For non-standard formatwith default settings of players , the 16: 9 aspect ratio is adjusted by compressing the image vertically and black bands are added above and below, in theory these bands should appear under the navigation buttons, and they for some reason above the bottom navigation. The expansion of the image vertically or the output in the original format of such non-standard video removes this strip, the video fills the entire screen but it turns out to be slightly elongated vertically. Very strange bug, I will try to communicate with the owners of similar s905x2
Who purchased this box, check for 4k video with a format other than 16: 9 the same band will climb out from the bottom?

I confirm the performance of the Spdif optical audio output, Kodi 18.1 accurately outputs to the audio receiver formats:
AC3 5.1
DTS 5.1
DTS HD 5.1
DTS HD 7.1

TrueHD 7.1 does not work

Post has been editedraw-2015 - 17.03.19, 20:59



Rep: (0)
[*] For the fact that Wi-Fi is implemented on the basis of the AP6255, and not on the AP6356S, the seller agreed to return 552.97 rubles.
selova, this is how the dispute?))



Rep: (0)
Hi guys!
There was a problem, I hope for your help!
I bought magicsee n5 max turned on entered the menu after that an error “In the MediaBox Launcher application failed again”
Below are two buttons "restart application"
And "close the application"
I click on them, nothing reacts! When you turn on the same, without entering the menu, this error immediately appears on the black screen!
Help who knows!
Thank you in advance!

Attached images
Attached Image



Rep: (3)
Good day!
cleaned up the topic? From the useful, no reference is opened ...
: thank_you:



Rep: (0)
Why in the useful links do not open? How to change the display of hours on the screen of the box from 12 hours format on the 24th? Why is there no Russian in the keyboard, how to fix it? Answer please, who knows.



Rep: (1)
Hi people!
I recently flashed my magic n5 max with this firmware
Android ATV. Frankenstein 8.1- 1.1. from x96max
Everything works fine even the native remote is trying.



Rep: (3)
Hi people!
I recently flashed my magic n5 max with this firmware
Android ATV. Frankenstein 8.1- 1.1. from x96max
Everything works fine even the native remote is trying.

Thanks, buddy! : thank_you:



Rep: (0)
I bought Magic M5 Max 4 | 64, Root is, installed SuperSU, after which the box asked to reboot .... I hung on the logo. I tried to reset through the recovery to the factory settings, it does not help, after the logo the box does not want to do anything. What should I do? HELP ME!



Rep: (0)
Maybe all the same Magicsee N5 Max 4 / 64gb


Full version    

Help     rules

Now: 07/05/19, 06:57