Wi Fi panoramic camera VR360-S2 - Discussion | Wi Fi panoramic camera 360 ° panoramic view, remote viewing, real-time video, video playback; two-way audio (listen / speak); many video recording modes, reset button.



Rep: (0)
DiscussionWi-Fi panoramic camera VR360-S2
Official site | Discussion �

Attached Image

Device photos
Attached Image

[spoiler = Device Description]
Device characteristics
Chipset: AK3918E
Image Sensor: SC1135
Function: 360 ° panoramic view, remote viewing, real-time video, video playback; two-way audio (listen / speak); many video recording modes, reset button
Pixels: 1.3 megapixels
Video: H.264 / 25fps, main stream (960p), auxiliary stream (VGA)
Minimum Illumination: 0.02 Lux @ (F2.0, AGC ON), 0 Lux with IR
Video Standard: PAL / NTSC
Phone / iPad APP V380
lens
Lens: 1.44mm
Pan & Tilt Pan Range: 0 ° -360 °, Tilt Range: -90 ° -90 °
Night vision:
Electronic Shutter: Auto, IR-CUT flitter
3pcs IR LED φ 15mm Infrared LED Array
IR distance 5-10M (different from the environment)
general
H.264 video compression
G.711 Sound Compression
Digital Noise Reduction: 3D
Network Protocol: WiFi Wireless Transfer (Support IEEE802.11b / g Wireless Protocol) 10 Mbps / 100 Mbps
Protocol: TCP / IP, UDP, RTSP, HTTPDDNS, DHCP, FTP, NTP
Alarm: Motion Detection, Alarm
ONVIF: Support ONVIF protocol compatible with ONVIF-based NVR
Storage location Cloud storage service, Micro SD Card support (max. 64 GB, 15-30 days of video storage)
Power Source: DC5V / 1.6A

Additional Information
Here is a more detailed description of such a camera:http://www.gzqida.com/fa13

  • Before posting read the message Video section rules
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedv_stavn - 10.02.19, 14:52
Reason for editing: mistakenly indicated a problem instead of a description



Rep: (0)
I got on aliexpress. The first time I set it up quickly, everything worked, except: the recording periodically disappeared. Then he made a reset. I couldn’t configure it after the reset: IP Pro3 application for Android from the Play Market does not see the camera via Wi-Fi as an access point. I see the network with its SSID, connect with the password from the instruction, scan the ports: only 2 - 80 and 64444 are open. But since the web page is apparently not provided, nothing opens ... It was reset several times, after the reset it broadcasts in Russian through speaker: "Configuration and launch mode", the LED flashes, after which, as written in the instructions, the application should find it (the camera) without problems, as it was when the first time it was configured. But for some reason he doesn’t find it ... Yes, for the first time she broadcast in Chinese, then she rebuilt it into Russian. It turns out that the language is not reset to the factory. Maybe this is not important ... The main reason why the application does not find it?



Rep: (1010)
M
The topic is closed due to a lack of interest from users. If you need to add something, or open a topic, contact using the buttonPicture


Full version    

Help     rules

Now: 08/16/19, 10:04