Jailbreak iOS 12.h.h | Poluotvyazanny, semipegged jailbreak



Rep: (1588)
Jailbreak iOS 12.x.x


Attached Image

Requirements:
  • Forunc0ver ->iPhone (5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XR , XS , XS Max ), IPod touch (6G, 7G), iPad (Air, Air 2, Air 3, 5, 6), iPad Pro (9.7, 12.9, 12.9 (2G), 10.5, 11, 12.9 (3G)), iPad mini ( 2, 3, 4, 5) installed iOS 12 (12.0, 12.0.1, 12.1, 12.1.1, 12.1.2, 12.1.3, 12.1.4, 12.2, 12.4, 12.4.1 )
  • ForChimera ->iPhone (5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XR, XS, XS Max), iPod touch (6G, 7G), iPad (Air, Air 2 ,Air 3, 5, 6), iPad Pro (9.7, 12.9, 12.9 (2G), 10.5, 11, 12.9 (3G)), iPad mini (2, 3, 4,5) with installed iOS 12 (12.0, 12.0.1, 12.1, 12.1.1, 12.1.2, 12.1.3, 12.1.4, 12.2, 12.4)
  • Forcheckra1n ->iPhone (5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X), iPod touch (6G, 7G), iPad (Air, Air 2, 5, 6), iPad Pro (9.7, 12.9, 12.9 (2G), 10.5), iPad mini (2, 3, 4) installed iOS 12 (12.3, 12.3.1, 12.3.2, 12.4.1, 12.4.2, 12.4.3, 12.4.4, 12.4.5)
  • To avoid problems with the device, Jailbreak is recommended to do on the "clean" firmware iOS 12.x.x
  • Create a backup using iCloud / iTunes, before usingunc0ver / Chimera / checkra1n to protect yourself from unwanted data loss.
  • Disable password lock / Touch ID / Face ID on your device, and also disable “Find iPhone / iPad” before usingunc0ver / Chimera / checkra1n to protect yourself from unwanted problems.
Important:
  • Requires iTunes latest version to update on iOS 12
  • Important pointupdate via iTunes and not by air.
  • If the device is not activated, it requires an Apple ID ->Jailbreak is not possible.
  • Owners of locked devices should refrain from upgrading to 12.x.x
  • During the jailbreak process, do not launch iTunes!
System requirements for running the utility:
  • Windows (minimum Windows 7), Mac OS X (minimum Mac OS X 10.9.5) or Linux (x86 / x86_64).
Jailbreak author:

unc0ver- poluotvyazanny Jailbreak iPhone devices (5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XR, XS, XS Max), iPod touch (6G, 7G), iPad (Air, Air 2, Air 3, 5, 6), iPad Pro (9.7, 12.9, 12.9 (2G), 10.5, 11, 12.9 (3G)), iPad mini (2, 3, 4, 5)
running iOS 12 (12.0, 12.0.1, 12.1, 12.1.1, 12.1.2, 12.1.3, 12.1.4, 12.2, 12.4, 12.4.1)

unc0ver it not supported for iOS jailbreaking 12.3, 12.3.1, 12.3.2, 12.4.2, 12.4.3, 12.4.4, 12.4.5
12.4.1 Support for iOS devices A12 processor ->iPhone (XR, XS, XS Max), are currently not supported iPad as the rest of the device.
unc0ver uses the original Cydia c Substrate (A7-A11), Substitute (A12 / A12X).

Attached Image

Instructions for JB (iOS 12.0-12.2, 12.4, 12.4.1)
1. Create a backup with iCloud / iTunes before using unc0ver.
I recommend to enter the device inDFUmode, flash on clean iOS 12.4 and only then do JB (jailbreak) - this will save you from many bugs.
2. If " Two-factor authentication ", Create a password for Cydia Impactor -> Creating a password for the program ", It must be entered on 10 step.
3. Be sure to delete the OTA update if the system has downloaded it ( Settings ->Major ->IPhone / iPad Storage ), Lock the OTA update -> How to disable automatic iOS update , cm. 17 step.
4. Turn off Siri ( Settings ->Siri and Search ) and reboot the device.
Cydia Impactordoes not work!
5. Download Cydia Impactor for your operating system from the site -> cydiaimpactor.com
For proper operation, Cydia Impactor must be installed.iTunes.
6. Run Cydia Impactor (internet required) .
7. Connect your device to your computer (iTunes on your computer should NOT be running).
8. Drag and drop Undecimus-v3.8.0-b1.ipa into the program Cydia Impactor .
Attached Image
9. Enter your Apple ID (e-mail).
Attached Image
10. Enter your Apple ID password.
Attached Image
You can use any Apple ID orCreate newfor these purposes.
11. Cydia Impactor take all the necessary steps to sign Undecimus-v3.8.0-b1.ipa .
Attached Image
If during the signature Cydia Impactor gave an error, open the spoilerFAQand find her solution.
Try online installation from different sources, monitorte theme! ->AltServer
12. Next you need to go -> Settings -> Main -> Profiles and device management -> Your "Apple ID" -> Trust .
13. Turn on Airplane Mode ( Settings ->Airplane mode ), after the appearance of Cydia, do not forget to turn off .
14. Run the unc0ver application on your device and click -> "Jailbreak" .
This step involves several restarts of the device, after which you need to re-do unc0ver ->"Jailbreak" .
1. Notice: The system snapshot has been successfully renamed. The device will now be restarted. Ok
2. Notice: Bootstrap has been successfully extracted. The device will now be restarted. Ok
3. Jailbreak Completed. OK (final step).

15. The result of all our actions should be the Cydia icon on one of the desktop pages on your device.
This jailbreak is considered to be “semi-connected”, after each power up the device must be restartedunc0ver ->"Jailbreak" for Cydia and tweaks.
If you have problems with re-jailbreak, disable unc0ver ->Settings ->Disable Revokes, this option does not work correctly on iOS 12.

Various nuances, restrictions associated with the signature (* .ipa) applications
Various nuances, restrictions associated with the signature (* .ipa) applications.


Attached Image

A semi-associated jailbreak is (* .ipa) an application that needs a signature, which means everything described below is relevant for this type of JB.

Free solutions:
  • Normal (free) Apple ID, you can sign no more than 3x (* .ipa) applications, they will work7 days (168 hours, 10080 minutes, 604800 seconds), after which they will cease to run on the device, which will require re-signing for further use, there is no need to delete “expired” applications, it is enough to re-sign them.
  • To automatically sign applications on a device with JB there is a tool ->Reprovision.
Paid solutions:
  • You can become an Apple developer (iOS Dev Center), which allows you to sign an unlimited number (* .ipa) of applications that will work no more than 1 year, it is worth the pleasure of $ 99 / year.
  • You can order a developer certificate ->google search (Only for familiarization, understanding of the situation, advertising, commerce on the forum is prohibited!) that will allow you to sign up (nor all applications can sign this waya) an unlimited number (* .ipa) of applications that will run on average for several months, but not more than 1 year (the certificate can be revoked by Apple before the end of time without explaining the reasons).
Questionable decisions:
  • Under this category are suitable for sites that offer online installation of the signed application, JB utilities that on one side looks comfortable, all signed, no PC needed, pressed and ready, on the other hand a certificate often recall, applications have much more advertising, JB utilities can contain malicious code, which makes this very doubtful if the installation of standalone applications can be ignored, the installation of utilities JB thus can negatively affect the security and overall performance of your device.
16. Add repository -> https://repo.incendo.ws and install Reprovision for automatic signing (* .ipa) JB, instruction .
17. Add repository -> https://xsf1re.github.io/repo/ and install MCPatch , Will establish tvOS 13 Beta Profile to block OTA update.
18. Add repository -> https://tigisoftware.com/cydia/ and install the file manager Filza file manager , if necessary, to be able to work with the iOS file system.
19. Install -> NewTerm 2 ( examples of possible commands ), a powerful terminal, the perfect companion to execute fast commands right on your device.
20. Add repository -> https://rpetri.ch/repo/ and update Rocketbootstrap (a library that allows tweaks to interact with isolated processes is necessary for normal operation of tweaks), install -> PreferenceLoader for the correct display of tweaks in the "Settings" iOS.
21. Add repository -> https://cydia.invoxiplaygames.uk and install iMessage RCE Patch to close vulnerabilities in iMessage (12.0 - 12.4).
22. Add repository -> https://repo.nullpixel.uk and install Tss saver , this tool will allow you to save SHSH2 ( Save SHSH for all devices ) with a single click, save SHSH2 every time after the release of the new version of iOS -> Rollback with futurerestore (prometheus)

-> Attached Image/Attached ImageExplanation of all switches in unc0ver ->Settings <-

/ * Do not delete anything from the iOS file system, it will not lead to anything good. To clean the system, use (neatly) ->iCleaner Pro. Do not try to install as many different tweaks as possible, this will not improve the performance of your system, install tweaks optimized for iOS 12, tweaks that you need for comfortable work. Be careful. * /
Identifying iPad, iPod, iPhone Models
How to use Cydia?
We read the topic ->Cydia. Instructions for use
How to add a repository in Cydia?
List of useful repositories
We read the topic ->Repositories for Cydia
AppSync for iOS 12.x.x
App Store Alternative
For an alternative to the App Store, use:
Tweaks
Programs from Cydia

List of tweaks that are compatible with iOS 12:
It is known that many extensions / tweaks cause problems due to the lack of proper compatibility with iOS 12.
Please be careful what you install! by@ Pwn20wnd
FAQ
  • - File manager does not see the root file system iOS.
Install from Cydia -> Apple File Conduit "2" (arm64 / KPPLess) .
  • - Which file managers to use for navigation in iOS?
We read -> File system navigation software
  • - Where are the data files / folders in iOS?
We read -> Directories in iOS
  • - How to remove jailbreak?
Enter the device into DFU , launch iTunes -> Restore .
  • - How to enter DFU mode?
We read -> [FAQ] Enter DFU mode
  • - How to enter Safe Mode?
We read -> Safe Mode
  • - How to install the application from the App Store / Cydia?
We read -> Installing * .deb and * .ipa
  • - Does jailbreak affect battery consumption?
Not! The battery consumption and device operation are affected by tweaks.
  • - What tweaks should be installed?
Only proven, optimized to work with iOS 12, tweaks from official sources.
  • - Can I install a third-party theme for iOS 12?
Yes, install from Cydia -> Snowboard / Anemone 3.0 for unc0ver
  • - How to remove the "tails" (settings) tweaks?
We read
  • - How to detect conflict tweak?
Install from Cydia -> CrashReporter / Cr4shed
  • - How to find out the validity of the certificate?
Install from Cydia -> CertRemainTime
  • - Some applications refuse to work normally in the presence of a jailbreak, what to do?
Add repository -> https://ryleyangus.com/repo/ and install a tweak from there -> Liberty / Liberty Lite
or add repository ->https://repo.nepeta.meand install a tweak from there ->Unsub
or add repository ->https://ios.jjolano.meand install a tweak from there ->Shadow
  • - What is needed to install hacked applications?
You need to install -> Appsync . We read carefully the topic -> AppSync for iOS 5 - 12
  • - Where can I read about the automatic signature * .ipa?
We read -> Reprovision
  • - Is it possible to do a full reset (erase content and settings) on a device with jailbreak?
It is impossible! Get the everlasting apple. unc0ver -> Settings disable everything except -> Restore RootFS (rec0ver) (need to activate the slider) , Refresh Icon Cache (need to activate the slider) -> Jailbreak / Re-Jailbreak / Restore RootFS , everything related to the jailbreak will be deleted, user data will remain, after which you can do Settings -> Main -> Reset -> Erase content and settings , all information from the device will be deleted.
  • - What to do after installing tweak perpetual apple / chamomile?
Make a forced restart of the device , after launching the device, turn on "Airplane Mode" ( Settings ->Airplane mode ), run unc0ver -> Settings -> Load Tweaks (off) , Load Daemons (off) -> "Jailbreak" , go to Cydia and delete the problem tweak, after removal enable Load tweaks , Load daemons -> "Re-Jailbreak" .
-->The cause of the eternal chamomile may be ->Reload daemons (unc0ver problem, the author is trying to solve it).
Make aforced restart of the device, after launching the device, turn on "Airplane Mode" (Settings ->Airplane mode ), run unc0ver -> Settings -> Reload Daemons (off) -> "Jailbreak" , run unc0ver -> Settings -> Reload Daemons (enable) -> "Re-Jailbreak" .
  • - After jailbreaking, there is no Cydia icon, what should I do?
Run unc0ver -> Settings -> Refresh Icon Cache (enable) , Reinstall Cydia (enable) -> Jailbreak ”/“ Re-Jailbreak ” .
  • - The application for jailbreaking in gray does not start (the program cannot be verified), what should I do?
You installed, tried to install jailbreak using a third-party site, the gray icon says that the certificate has been revoked. To solve this problem, you need a PC and Cydia Impactor, read the basic instructions in the topic header.
  • - I have iOS 5.x.x / 6.x.x / 7.x.x / 8.x.x with a jailbreak, how do I switch to iOS 12?
We read
  • - I always update the device over the air OTA (Over-the-Air), how to flash through iTunes?
Back up your data with iTunes enter device into DFU mode, run iTunes -> Restore .
  • - Does unc0ver block over-the-air OTA (Over-the-Air)?
Yes. We read -> How to disable automatic iOS update .
  • - How to update unc0ver?
Add repository -> https://repo.incendo.ws ->and install a tweak from there -> Reprovision produce initial setting , open the link with (* .ipa) in the browser, wait for the download and select ->open in the program “ReProvision” -> INSTALL , reboot the device.
  • - How to use Cydia?
We read -> Cydia. Instructions for use
  • - I have errors in Cydia, how to fix them?
We read -> Popular problems in Cydia and how to solve them / Cydia - Help
  • - The “Other” section has greatly increased, how to deal with it?
We read
  • - What is the identifier (Model ID) of my device?
Check out the topic -> Apple Device Model IDs
  • - Cydia Impactor gives the error "utility.cpp: 185", what should I do?
Cydia Impactor does not understand Cyrillic in directories, move Cydia Impactor to drive C or another place where the path does not contain Cyrillic.
  • - Cydia Impactor gives the error "installation.cpp: 42 (Failed to verify code of / private / var / installd / ***)", what to do?
We read , We read .
  • - Cydia Impactor gives the error "lockdown.cpp: 57", what to do?
Right-click on Impactor.exe ->Properties ->Compatibility ->Run the program in compatibility mode with Windows 7 ->OK.
  • - Cydia Impactor gives the error "provision.cpp: 150", what should I do?
Create a password for Cydia Impactor -> Creating a password for the program .
  • - Cydia Impactor gives the error "provision.cpp: 62", what should I do?
Apple's problems -> System Status
  • - Cydia Impactor gives the error "provision.cpp: 81", what should I do?
Revoke certificate ->Cydia Impactor ->Xcode ->Revoke Certificates or by -> CertificateManager and repeat.
Install (* .ipa) ->Cydia Impactor ->Device ->Install Package ...
  • - Cydia Impactor gives the error "Problem with the SSL CA cert (path? Access right?)" / "SSL connect error", what to do?
Cydia Impactor ->Impactor ->Insecure SSL and repeat.
  • - Cydia Impactor gives the error "Sign in with the app-specific password you generated. If you’ve forgotten to go to appleid.apple.com, what to do?
You have enabled " Two-factor authentication ", Create a password for Cydia Impactor -> Creating a password for the program , YouTube .
  • - unc0ver after clicking "Jailbreak" gives the error "Unable to exploit kernel. This is no an error. Reboot and try again. "What to do?
Choose another Kernel Exploit (unc0ver ->Settings) and repeat.
  • - unc0ver gives the error "RootFS already mounted, delete OTA file from Settings - Storage if present and reboot.", what should I do?
We read
  • - What is a "semi-linked" jailbreak?
A semi-associated jailbreak provides access to the file system only until the first reboot or power failure. Thus, a semi-associated jailbreak requires the application to be restarted. unc0ver ->"Jailbreak" which re-fills the files required for jailbreaking into the device and makes it load in jailbreak mode.
  • - If the jailbreak is “semi-connected”, will all tweaks settings be reset after a reboot or power failure?
No, all settings remain the same, just restart the application unc0ver ->"Jailbreak" .
  • - How to remove a badge (red unit) from iOS settings?
Install from Cydia -> Badgemenot , the badge inside the settings is removed as follows -> Jailbreak iOS 12.x.x (Post i_Mobilka # 83493387)
  • - Is it possible to find out how the firmware is installed on the device?
Unfortunately not.

Attached Image


Changes in v3.8.0 ~ b1:
1. Added support for iOS 12.4.1 iPhone A12 (currently iPad is not supported).
Changes in v3.7.0 ~ b4-1:
1. Update Cydia set for the network access request on Chinese devices.
2. Rename complete mobilesubstrate, to match other jailbreak.
3. Upgrade to substitute 0.1.0.
Changes in v3.7.0 ~ b3:
1. Fixed a reboot system daemons using Substrate (A7-A11).

Attached fileUndecimus-v3.8.0-b1.ipa(32.96 MB)

Change history
Changes in v3.7.0 ~ b2:
1. Fixed cameras on devices A12-A12X.
2. Fixed GPS devices work on the A12-A12X.
3. Fixed a problem with shopping in the App Store on devices A12-A12X.
4. Fixed Face ID on the devices A12-A12X.
5. Fixed performance issues on devices A12-A12X.
6. Fixed stability problems on devices A12-A12X.
7. The problem with restarting the system daemons on devices A12-A12X.
8. Fixed general stability issues of system services on the devices A12-A12X.
9. Fixed a shutdown of the system on the devices A12-A12X.
10. Fixed a reboot of the system on the devices A12-A12X.
11. Fixed USB devices work on the A12-A12X.
12. Fixed a bug in the Xcode debugging devices A12-A12X.
13. Fixed bug in libsubstitute, which resulted in damage to TetherMe tweak on devices A12-A12X.
14. Fixed an issue with memory management on devices A12-A12X.
15. Fixed tweak injection (Substitute) on devices with MobileSafari A12-A12X.
16. On a full bypass AMFI / CoreTrust on devices A12-A12X.
17. Reloading system daemons via launchctl instead ldrestart.
18. Reloading system daemons before restarting SpringBoard.
Changes in v3.7.0 ~ b1:
1. Full support for A12-A12X with Cydia and system-wide tweak injection (Substitute).
Changes v3.6.3:
1. The problem with finding offsets kernels on A8 has been fixed.
Changes v3.6.2:
1. The problem with API access to the kernel virtual memory on A7-A8 devices that made jailbreaking useless due to a failure to copy large kernel data (an error known as: "Unable to copy container profile in kernel memory.") Is fixed
Changes v3.6.1:
1. Improved Automatically Select Exploit.
Changes v3.6.0:
1. Completely redesigned and rewritten all the patches for jailbreaking from scratch.
2. Patches for jailbreaking are static, not dynamic - this means that the stability of the system will be fully restored after the jailbreak.
3. Fixed application crash on startup when it is signed by profiles with non-ASCII characters.
4. Internal preparation of jailbreak patches for full support for A12-A12X.
5. Jailbreak is much more reliable and faster in operation.
6. Added SockPort 3.0 exploit to increase reliability on iOS 12.4 and devices with low RAM.
7. Fixed SSH support for arm64e devices running iOS 12.0-12.1.2.
8. Jailbreak is possible with damaged SystemVersion.plist on iOS 12.4.
9. The jailbreak performs proper cleaning to maintain system stability in the event of a failure.
10. Fixed jbctl command line utility.
11. The transition to a new technique to configure system boot nonce generator, which works on all arm64e devices running iOS 12.0-12.4 (thanks@ 0x7fffor the idea).
12. Fixed a bug due to which the initial installation of Cydia sometimes freezed.
13. Significantly accelerated the initial installation process of Cydia.
14. Internal preparation of upcoming substitute support.
15. Internal training of Cydia and its resources for full support for arm64e.
Changes v3.5.6:
1. Added support for mounting RootFS in read-write mode on A12-A12X devices running iOS 12.1.3-12.4.
2. Added support for RootFS recovery on A12-A12X devices running iOS 12.1.3-12.4.
Changes v3.5.5:
1. Fixed problems with the jailbreak presented in the latest update.
2. Fixed support for iOS 11.
Changes v3.5.4:
1. Added full support for SSH with root-shell for A12-A12X devices on iOS 12.1.3-12.4.
2. Added support for arbitrary execution of unsigned code on A12-A12 devices with iOS 12.1.3-12.4 (Note: object files must be signed using the CMS blob using the codesign utility).
3. Added support for launching expired or withdrawn applications on A12-A12X devices on iOS 12.1.3-12.4.
4. Fixed instant or random reboots after jailbreaking using the SockPuppet3.0 exploit on A7-A12X devices on iOS 11.0-12.4.
Changes v3.5.3:
1. Added partial WIP support for A12-A12X devices on iOS 12.1.3, 12.1.4, 12.2 and 12.4 with support for installing HSP # 4 as TFP0, setting kernel_task info, exporting kernel_task port, dumping APTicket, logging KASLR shift and ECID and disabling auto updates.
-> Has been withdrawn, contains errors.
Changes v3.5.2:
1. Fixed exploit of SockPuppet 3.0 on iPad Mini 4 and iPad Air 2.
Changes v3.5.1:
1. Added updated exploit SockPuppet 3.0 from@umanghere
2. Removed exploits SockPort and SockPort2.
3. Updated system-memory-reset to fix random reboots.
4. Added thanks to Apple.
5. The error was fixed in stage 2 when jailbreaking after updating from a lower firmware while saving application data.
6. Fixed crash of the application on iOS 11.
Changes v3.5.0:
1. Added support for iOS 12.4 in the exploits of Sock Puppet (A8-A11) and Sock Port (A7-A7X).
Changes v3.4.2:
1. Fixed a bug due to which the SockPuppet kernel exploit was not displayed on the A8-A8X devices.
Changes v3.4.1:
1. Fixed a sandbox exchange error when using non-SockPuppet exploits.
2. Added SockPort 1.5 exploit from@jakeajamesfor A7-A9X devices (reliability: ~ 95% of comprehensive testing).
3. Disabled the SockPuppet exploit on the A7-A7X due to reliability issues.
4. Added support for iOS 12.3 ~ b1 for jailbreaking (tested on iPhone 5s).
5. Fixed theoretical reliability bug with SockPuppet.
Changes v3.4.0:
1. The SockPort 2.0 exploit has been replaced by the SockPuppet 2.0 exploit with greater reliability and stability on older devices.
Changes v3.3.8:
1. Use rewritten SockPort 2.0 with ~ 100% reliability, execution time ~ 100 milliseconds and support for all devices on iOS 11.0-12.2 (exception A12-A12X at 12.1.3-12.2).
2. Fixed jailbreak on iOS 12.2 for iPhone and iPod.
Changes v3.3.7:
1. Increased reliability of the Sock Port kernel exploit on 4K devices.
Changes v3.3.6:
1. Fixed Sock Port crash on 4K devices.
Changes v3.3.5:
1. Fixed a reliability bug in the Sock Port.
2. Fixed Sock Puppet on A8X.
Changes v3.3.4:
1. Added exploitSock portfrom@jakeashacksfor the A7-A9X with iOS 11.0-12.1.4.
Changes v3.3.3:
1. Fixed Sock Puppet kernel exploit on iOS 11.
2. Fixed the compatibility state of the Voucher Swap exploit with iPad Air 2 and iPad Mini 4 on iOS 11.
Changes v3.3.2:
1. Fixed bug when searching for offsets kernel on iOS 11.
Changes v3.3.1:
1. Increased jailbreak speed for a few seconds.
2. Fixed a bug in the dark mode on the iPad.
Changes v3.3.0:
1. Fixed bug when searching offsets kernel.
Changes v3.3.0 ~ b7:
1. Fixed false unsupported error 12.2 ~ b6.
2. Fixed reset button.
3. Fixed offsets search when installing updates.
4. Gratitude@NedWilliamsonto the developer of Sock Puppet.
Changes v3.3.0 ~ b6:
1. Increased reliability of the Sock Puppet exploit.
2. Possible jailbreak with damaged SystemVersion.plist (on request Redditor).
3. Fixed a faulty kernel patch to prevent accidental reboots.
Changes v3.3.0 ~ b5:
1. Fixed a problem with reliability that occurred in the previous build.
2. Fixed a bug in approval.
Changes v3.3.0 ~ b4:
1. Fixed the reliability issue of the sock_puppet exploit on iOS 12.2.
-> Has been withdrawn, contains errors.
Changes v3.3.0 ~ b3:
1. Re-implementation of the sock_puppet exploit.
2. Fixed logging with the sock_puppet exploit.
3. Fixed bug in remounting RootFS on iOS 12.2.
4. The Sock Puppet exploit is enabled on A12 devices with iOS 12.0-12.1.2 and disabled on 4K devices.
Changes v3.3.0 ~ b2:
1. All settings were disabled by default, fixed.
Changes v3.3.0 ~ b1:
1. Added Sock Puppet exploit for A7-A11 devices with iOS 12.0-12.2.
2. Removed the empty_list and multi_path exploits.
3. Replaced the segmented kernel exploit switch with a selection view.
4. Added view of the choice of platform code substitution.
Changes v3.2.1:
1. Fixed several typos in the application.
2. Updated uikittools.
3. Ignore the badge update cache failures, unless they are fatal.
Changes v3.2.0:
1. New user interface (@HiMyNameIsUbik).
2. Added dark mode for user interface.
3. Added information buttons for options.
4. Improved jailbreak reliability with the help of machswap and machswap2 exploits.
5. Updated jailbreak resources to fix the CS_DEBUGGED option.
Changes v3.1.3:
1. Fixed a bug in the status update.
2. Fixed a logical error when remounting the root file system (reddit.com/r/jailbreak/).
3. Made it so that machswap and machswap2 are not dependent on the theft of the kernel credentials in order to eliminate a possible reliability problem.
4. Upgrading kernel patches to use a more secure allocation method.
5. Fixed missing information in the jailbreak completion notification.
6. Fixed false information in the jailbreak completion notification.
Changes v3.1.2:
1. Fixed a bug in the user interface settings on small devices.
2. Added option to hide HUD progress.
Changes v3.1.1:
1. Fixed recovery of the root file system when the system is not in a jailbreak state on iOS 11.
2. Added option to automatically restart SpringBoard after jailbreak completion, instead of waiting for the user to press the OK button.
Changes v3.1.0:
1. The kernel patch has been rewritten from scratch to improve the stability and reliability of the jailbreak.
2. The preference management system was rewritten from scratch to optimize the jailbreak.
3. From scratch rewritten diagnostic system to provide more useful information.
4. The unrestrict library is rewritten from scratch to improve the stability of the system after jailbreaking.
5. Added support for switching from other iOS 12 jailbreaks without restoring the root file system and data loss.
6. Made Unrestrict and added sandbox exceptions for mach_lookup and mach_register.
7. Fixed issues with processes looking for the Substrate port in iOS 12 to fix stability and performance issues.
8. Fixed support for broken versions of RocketBootstrap and tweaks with hid support.
9. Fixed iMessage crash when sending a voice message.
10. Fixed disappearance of FaceTime calls on some devices.
11. Fixed camera crash on some devices.
12. Update the local APT repository to include the latest updates from the Elucubratus repository, including updated uikittools with rewritten uicache and sbreload commands to update the icon cache and reboot SpringBoard much faster when installing packages from Cydia.
13. Updating the icon cache during the restoration of the root file system to fix the jailbreak of the application remaining on the home screen after restoring the root file system.
14. Updated mobilesubstrate to version 0.9.7033 to disable the bootloader in the securityd daemon to fix the hang issue on iOS 12.
15. Significantly improved jailbreak reliability when using machswap or machswap2.
16. Wait until the user clicks OK in the jailbreak completion message before respringing.
17. Improved self-repair jailbreak.
18. Added HUD progress to display jailbreak process status.
19. Optimized code.
20. Improved approval.
21. Added specific error messages.
22. Display device information at startup.
23. Cleared logging.
24. Reconfigured settings "Reload System Daemons" and "Enable get-task-allow".
25. The option "Enable get-task-allow" is active by default.
Changes v3.0.1:
1. An iteration of the proc list has been performed with the appropriate data locks in Unrestrict to correct a possible race condition in the kernel (Important stability fix).
2. Fixed a typo in the application.
3. Fixed a bug in logging.
4. Added a reset button for iOS 12.1.3 - 12.2.
-> Dangerous to the device.
Changes v3.0.0:
1. Final release.
Changes v3.0.0 ~ b51:
1. Cleaning the code.
2. Updated jailbreak resources to improve performance and eliminate kernel memory leaks.
3. Display of bytes written to the kernel’s memory in a status message.
4. Fixed a problem with the cache of icons in the RootFS Restore (for example, Cydia remains on the home screen after restoring the root file system).
Changes v3.0.0 ~ b50:
1. Fixed bug when loading Substrate.
2. Added a switch to enable get-task-allow for each process for developers.
3. Added a switch to set CS_DEBUGGED for each process for developers.
4. Added a switch to use SSH-Only mode on any unbootstrapped device, for developers.
5. Updated jailbreak resources.
6. Updated list of cached APT files for repositories.
7. Update remount root filesystem to always add “.disabled” to the name of the system snapshot.
8. Improved performance.
Changes v3.0.0 ~ b49:
1. Fixed night reboots or reset of system memory caused by mmaintenanced.
2. Fixed freezing due to lack of memory on iOS 12.
3. Fixed a hang when loading tweaks or when restarting securityd on iOS 12.
4. Fixed kernel memory leak.
5. Fixed a broken sandbox patch.
6. Offsets are stored in the living memory of the kernel.
7. Optimized code.
8. Improved the success rate of machswap and machswap2.
9. No reboot after bootstrap is removed.
10. Fixed a bug in logging.
11. Improved performance.
12. Improved approval.
13. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b48:
1. Fixed pmap_load_trust_cache bug on some devices.
2. Fixed problem of status insertion.
Changes v3.0.0 ~ b47:
1. Added machswap2 by exploit@iBSparkeswith 90% success for all A7-A12X devices on iOS 11.0-12.1.2.
2. Added support for only full-shell SSH for A12-A12X devices.
3. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b46:
1. Improved approval.
2. It is forbidden for the device to fall asleep while the application is active.
3. Disable the “Disable App Revokes” switch and its changes, if it was used earlier, to prevent serious problems with instability that caused problems with downloading tweaks in iOS 12.
4. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b45:
1. Fixed voucher_swap exploit for beta firmware on A12-A12X.
2. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b44:
1. Included partial support (Export / Un-Export Kernel Task Port, Set HSP4 as TFP0, Dump APTicket, Overwrite Boot Nonce, Log Slide, Log ECID, Disable Auto Updates, Remount RootFS, Disable App Revokes, Restore RootFS) for A12 devices -A12X with iOS 12.0 - 12.1.2.
2. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b43:
1. Fixed error exiting the sandbox on some devices.
2. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b42:
1. Exploit machswap a little faster.
2. The machswap exploit supports A9 (X).
3. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b41:
1. Added machswap by exploit@iBSparkeswith 95% success for all 4K devices on iOS 11.0-12.1.2.
2. Removed v1ntex and v3ntex exploits.
3. Updated jailbreak resources to fix a broken kernel patch.
Changes v3.0.0 ~ b40:
1. Support for all devices (except A12) on iOS 12 running Cydia and Substrate.
Changes v3.0.0 ~ b39:
1. InstallationNoBetaAlertif the device has a beta firmware installed.
2. InstallationLetmeblockif the device is running iOS 12.0 or higher.
3. Improved nvram patch to improve jailbreak performance.
4. Added more code to debug possible problems.
5. Fixed cleaning of diagnostic data.
6. Fixed kernel memory leak.
7. Updated offsets cache to not cache unused offset.
8. Dump nvram variable list.
9. Fixed jailbreak after unsuccessful extraction of bootstrap.
10. Reload mDNSResponder before backboardd when loading tweaks without enabling the Reload System Daemons.
11. Updated list of cached APT files for repositories.
12. Update the local APT repository.
Changes v3.0.0 ~ b38:
1. Fixed v1ntex exploit.
2. Fixed a theoretical error in determining the status of device support.
3. Fixed a theoretical error in the user interface.
4. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b37:
1. Partial 4K support (A7 / A8) on iOS 12 is enabled to enable nonce installation and disable iOS automatic update.
2. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b36:
1. The version has the number b36 to avoid confusion caused by the previous error in the version numbering.
2. Significantly improved the reliability of loading tvikov.
3. Improved download reliability patchfinder64.
4. Updated list of cached APT files for repositories.
Changes v3.0.0 ~ b34:
1. Fixed the root cause of crashes "Reload System Daemons" in iOS 12.
2. Added a list of cached APT files to facilitate loading of repositories.
Changes v3.0.0 ~ b33:
1. Fixed the stability problem with rebooting system daemons (Reload System Daemons), which was known for causing the device to hang with a rotating wheel. (If you are still experiencing this problem, you should use the file system recovery function (RootFS) and try the jailbreak again).
2. Fixed bug loading tvikov without rebooting system daemons (Reload System Daemons).
3. Fixed a bug in approval.
4. Cancellation of certificate revocation by adding entries to the hosts file to work on iOS 12 (Letmeblockby@PoomSmart).
5. Hidden warning about the expiration of the beta version of iOS (NoBetaAlertby@ parrotgeek1) if NoBetaAlert / NoBetaNag are installed, they must be removed.
-> Has been withdrawn, contains errors.
Changes v3.0.0 ~ b32:
1. Fixed infinite respring with Reload System Daemons.
-> Has been withdrawn, contains errors.
Changes v3.0.0 ~ b31:
1. Attempting to rename the system snapshot more securely by improving approval.
Changes v3.0.0 ~ b30:
1. Update libapt in packages.
2. ldrestart is more reliable.
Changes v3.0.0 ~ b29:
1. Full support for iOS 12.0 - 12.1.2 for A8X-A11 devices with Cydia and Substrate from@saurik.
Older versions
unc0ver v3.0.0 ~ b29
unc0ver v3.0.0 ~ b30
unc0ver v3.0.0 ~ b31
unc0ver v3.0.0 ~ b32
unc0ver v3.0.0 ~ b33
unc0ver v3.0.0 ~ b34
unc0ver v3.0.0 ~ b36
unc0ver v3.0.0 ~ b37
unc0ver v3.0.0 ~ b38
unc0ver v3.0.0 ~ b39
unc0ver v3.0.0 ~ b40
unc0ver v3.0.0 ~ b41
unc0ver v3.0.0 ~ b42
unc0ver v3.0.0 ~ b43
unc0ver v3.0.0 ~ b44
unc0ver v3.0.0 ~ b45
unc0ver v3.0.0 ~ b46
unc0ver v3.0.0 ~ b47
unc0ver v3.0.0 ~ b48
unc0ver v3.0.0 ~ b49
unc0ver v3.0.0 ~ b50
unc0ver v3.0.0 ~ b51
unc0ver v3.0.0
unc0ver v3.0.1
unc0ver v3.1.0
unc0ver v3.1.1
unc0ver v3.1.2
unc0ver v3.1.3
unc0ver v3.2.0
unc0ver v3.2.1
unc0ver v3.3.0 ~ b1
unc0ver v3.3.0 ~ b2
unc0ver v3.3.0 ~ b3
unc0ver v3.3.0 ~ b4
unc0ver v3.3.0 ~ b5
unc0ver v3.3.0 ~ b6
unc0ver v3.3.0 ~ b7
unc0ver v3.3.0
unc0ver v3.3.1
unc0ver v3.3.2
unc0ver v3.3.3
unc0ver v3.3.4
unc0ver v3.3.5
unc0ver v3.3.6
unc0ver v3.3.7
unc0ver v3.3.8
unc0ver v3.4.0
unc0ver v3.4.1
unc0ver v3.4.2
unc0ver v3.5.0
unc0ver v3.5.1
unc0ver v3.5.2
unc0ver v3.5.3
unc0ver v3.5.4
unc0ver v3.5.5
unc0ver v3.5.6
unc0ver v3.6.0
unc0ver v3.6.1
unc0ver v3.6.2
unc0ver v3.6.3
unc0ver v3.7.0 ~ b1
unc0ver v3.7.0 ~ b2
unc0ver v3.7.0 ~ b3
unc0ver v3.7.0 ~ b4-1


Chimera- semi-untethered jailbreak for iPhone devices (5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XR, XS, XS Max), iPod touch (6G, 7G), iPad (Air, Air 2, 5, 6), iPad Pro (9.7, 12.9, 12.9 (2G), 10.5, 11, 12.9 (3G)), iPad mini (2, 3, 4)
running iOS 12 (12.0, 12.0.1, 12.1, 12.1.1, 12.1.2, 12.1.3, 12.1.4, 12.2, 12.4)

Chimera is not supported on iOS jailbreak 12.3, 12.3.1, 12.3.2, 12.4.1, 12.4.2, 12.4.3, 12.4.4, 12.4.5
Chimera does not support jailbreaking an A12 / A12X processor ->iPhone (XR, XS, XS Max), iPad Air 3, iPad Pro (11, 12.9 (3G)), iPad mini 5 on iOS 12.1.3, 12.1.4, 12.2, 12.4
Chimera uses Sileo c alternative to Substrate, known as ->Substitute.
Some repositories may not work with Sileo due to lack of support SHA256 / HTTPS
Chimera is best used for iPhone (XR, XS, XS Max), iPad Pro (11, 12.9 (3G)) on iOS 12.0, 12.0.1, 12.1, 12.1.1, 12.1.2, for other devices ->unc0ver.

Attached Image

Instructions for implementing JB (iOS 12.0-12.2, 12.4)
1. Create a backup with iCloud / iTunes before using chimera.
I recommend to enter the device inDFUmode, flash on clean iOS 12.4 and only then do JB (jailbreak) - this will save you from many bugs.
2. If " Two-factor authentication ", Create a password for Cydia Impactor -> Creating a password for the program ", It must be entered on 10 step.
3. Be sure to delete the OTA update if the system has downloaded it ( Settings ->Major ->IPhone / iPad Storage ), Lock the OTA update -> How to disable automatic iOS update , cm. 17 step.
4. Turn off Siri ( Settings ->Siri and Search ) and reboot the device.
Cydia Impactordoes not work!
5. Download Cydia Impactor for your operating system from the site -> cydiaimpactor.com
For proper operation, Cydia Impactor must be installed.iTunes.
6. Run Cydia Impactor (internet required) .
7. Connect your device to your computer (iTunes on your computer should NOT be running).
8. Drag and drop Chimera-1.3.9.ipa into the program Cydia Impactor .
Attached Image
9. Enter your Apple ID (e-mail).
Attached Image
10. Enter your Apple ID password.
Attached Image
You can use any Apple ID orCreate newfor these purposes.
11. Cydia Impactor take all the necessary steps to sign Chimera-1.3.9.ipa .
Attached Image
If during the signature Cydia Impactor gave an error, open the spoilerFAQand find her solution.
Try online installation from different sources, monitorte theme! ->AltServer
12. Next you need to go -> Settings -> Main -> Profiles and device management -> Your "Apple ID" -> Trust .
13. Turn on Airplane Mode ( Settings ->Airplane mode ), after the appearance of Sileo, do not forget to turn off .
14. Launch the Chimera app on your device and click -> "Jailbreak" .
This step involves several restarts of the device, after which you need to re-do Chimera ->"Jailbreak" .
1. Reboot Recommended: To ensure that it is running, it is reccomended that it is ran immediately after a reboot. Continue Anyway /Cancel .
To ensure optimal success when starting Chimera, it is recommended to start it immediately after the device is rebooted, click ->Cancel , off / on device, Chimera -> "Jailbreak" .
2. Reboot required: Chimera has to reboot to finish the jailbreak process. When your device reboots, re-open Chimera to complete the process. Ok
3. The final step.

15. The result of all our actions should be the Sileo icon on one of the desktop pages on your device.
This jailbreak is considered to be “semi-connected”, after each power up the device must be restartedChimera ->"Jailbreak" for the work of Sileo and tweaks.
Various nuances, restrictions associated with the signature (* .ipa) applications
Various nuances, restrictions associated with the signature (* .ipa) applications.


Attached Image

A semi-associated jailbreak is (* .ipa) an application that needs a signature, which means everything described below is relevant for this type of JB.

Free solutions:
  • Normal (free) Apple ID, you can sign no more than 3x (* .ipa) applications, they will work7 days (168 hours, 10080 minutes, 604800 seconds), after which they will cease to run on the device, which will require re-signing for further use, there is no need to delete “expired” applications, it is enough to re-sign them.
  • To automatically sign applications on a device with JB there is a tool ->Reprovision.
Paid solutions:
  • You can become an Apple developer (iOS Dev Center), which allows you to sign an unlimited number (* .ipa) of applications that will work no more than 1 year, it is worth the pleasure of $ 99 / year.
  • You can order a developer certificate ->google search (Only for familiarization, understanding of the situation, advertising, commerce on the forum is prohibited!) that will allow you to sign up (nor all applications can sign this waya) an unlimited number (* .ipa) of applications that will run on average for several months, but not more than 1 year (the certificate can be revoked by Apple before the end of time without explaining the reasons).
Questionable decisions:
  • Under this category are suitable for sites that offer online installation of the signed application, JB utilities that on one side looks comfortable, all signed, no PC needed, pressed and ready, on the other hand a certificate often recall, applications have much more advertising, JB utilities can contain malicious code, which makes this very doubtful if the installation of standalone applications can be ignored, the installation of utilities JB thus can negatively affect the security and overall performance of your device.
16. Add repository -> https://repo.incendo.ws and install Reprovision for automatic signing (* .ipa) JB, instruction .
17. Add repository -> https://xsf1re.github.io/repo/ and install MCPatch , Will establish tvOS 13 Beta Profile to block OTA update.
18. Add repository -> https://tigisoftware.com/cydia/ and install the file manager Filza file manager , if necessary, to be able to work with the iOS file system.
19. Install -> NewTerm 2 ( examples of possible commands ), a powerful terminal, the perfect companion to execute fast commands right on your device.
20. Add repository -> https://rpetri.ch/repo/ and update Rocketbootstrap (a library that allows tweaks to interact with isolated processes is necessary for normal operation of tweaks), install -> PreferenceLoader for the correct display of tweaks in the "Settings" iOS.
21. Add repository -> https://cydia.invoxiplaygames.uk and install iMessage RCE Patch to close vulnerabilities in iMessage (12.0 - 12.4).
22. Add repository -> https://repo.nullpixel.uk and install Tss saver , this tool will allow you to save SHSH2 ( Save SHSH for all devices ) with a single click, save SHSH2 every time after the release of the new version of iOS -> Rollback with futurerestore (prometheus)

/ * Do not delete anything from the iOS file system, it will not lead to anything good. To clean the system, use (neatly) ->iCleaner Pro. Do not try to install as many different tweaks as possible, this will not improve the performance of your system, install tweaks optimized for iOS 12, tweaks that you need for comfortable work. Be careful. * /
Sileo
Tweaks
Programs from Cydia

List of tweaks that are compatible with iOS 12:
Tweak developers should add supportarm64e / A12 (X) tweaks to work on iPhone (XR, XS, XS Max), iPad Pro (11, 12.9 (3G)).
It is known that many extensions / tweaks cause problems due to the lack of proper compatibility with iOS 12.
Please be careful what you install! by@ Pwn20wnd
FAQ
  • - File manager does not see the root file system iOS.
Install from Sileo -> Apple File Conduit "2" (arm64 / KPPLess) .
  • - Which file managers to use for navigation in iOS?
We read -> File system navigation software
  • - Where are the data files / folders in iOS?
We read -> Directories in iOS
  • - How to remove jailbreak?
Enter the device into DFU , launch iTunes -> Restore .
  • - How to enter DFU mode?
We read -> [FAQ] Enter DFU mode
  • - How to enter Safe Mode?
We read -> Safe Mode
  • - How to install the application from the App Store / Cydia?
We read -> Installing * .deb and * .ipa
  • - Does jailbreak affect battery consumption?
Not! The battery consumption and device operation are affected by tweaks.
  • - What tweaks should be installed?
Only proven, optimized to work with iOS 12, tweaks from official sources.
  • - Can I install a third-party theme for iOS 12?
Yes, install from Sileo -> Snowboard / Anemone 3
  • - How to remove the "tails" (settings) tweaks?
We read
  • - How to detect conflict tweak?
Install from Sileo -> CrashReporter / Cr4shed
  • - How to find out the validity of the certificate?
Install from Sileo -> CertRemainTime
  • - Some applications refuse to work normally in the presence of a jailbreak, what to do?
Add repository -> https://ryleyangus.com/repo/ and install a tweak from there -> Liberty / Liberty Lite
or add repository ->https://repo.nepeta.meand install a tweak from there ->Unsub
or add repository ->https://ios.jjolano.meand install a tweak from there ->Shadow
  • - What is needed to install hacked applications?
You need to install -> Appsync . We read carefully the topic -> AppSync for iOS 5 - 12
  • - Where can I read about the automatic signature * .ipa?
We read -> Reprovision
  • - Is it possible to do a full reset (erase content and settings) on a device with jailbreak?
It is impossible! Get the everlasting apple. Chimera -> Restore RootFS -> Ok -> "Restore Filesystem" -> Ok , everything related to the jailbreak will be deleted, user data will remain, after which you can do Settings -> Main -> Reset -> Erase content and settings , all information from the device will be deleted.
  • - What to do after installing tweak perpetual apple / chamomile?
Make a forced restart of the device , after launching the device, turn on "Airplane Mode" ( Settings ->Airplane mode ), run Chimera -> Disable Tweaks -> "Jailbreak" , go to Sileo and delete the problem tweak.
  • - The application for jailbreaking in gray does not start (the program cannot be verified), what should I do?
You installed, tried to install jailbreak using a third-party site, the gray icon says that the certificate has been revoked. To solve this problem, you need a PC and Cydia Impactor, read the basic instructions in the topic header.
  • - I have iOS 5.x.x / 6.x.x / 7.x.x / 8.x.x with a jailbreak, how do I switch to iOS 12?
We read
  • - I always update the device over the air OTA (Over-the-Air), how to flash through iTunes?
Back up your data with iTunes enter device into DFU mode, run iTunes -> Restore .
  • - Does Chimera block over-the-air OTA (Over-the-Air)?
Not. We read -> How to disable automatic iOS update .
  • - How to upgrade Chimera?
Add repository -> https://repo.incendo.ws ->and install a tweak from there -> Reprovision produce initial setting , open the link with (* .ipa) in the browser, wait for the download and select ->open in the program “ReProvision” -> INSTALL , reboot the device.
  • - The “Other” section has greatly increased, how to deal with it?
We read
  • - What is the identifier (Model ID) of my device?
Check out the topic -> Apple Device Model IDs
  • - Cydia Impactor gives the error "utility.cpp: 185", what should I do?
Cydia Impactor does not understand Cyrillic in directories, move Cydia Impactor to drive C or another place where the path does not contain Cyrillic.
  • - Cydia Impactor gives the error "installation.cpp: 42 (Failed to verify code of / private / var / installd / ***)", what to do?
We read , We read .
  • - Cydia Impactor gives the error "lockdown.cpp: 57", what to do?
Right-click on Impactor.exe ->Properties ->Compatibility ->Run the program in compatibility mode with Windows 7 ->OK.
  • - Cydia Impactor gives the error "provision.cpp: 150", what should I do?
Create a password for Cydia Impactor -> Creating a password for the program .
  • - Cydia Impactor gives the error "provision.cpp: 62", what should I do?
Apple's problems -> System Status
  • - Cydia Impactor gives the error "provision.cpp: 81", what should I do?
Revoke certificate ->Cydia Impactor ->Xcode ->Revoke Certificates or by -> CertificateManager and repeat.
Install (* .ipa) ->Cydia Impactor ->Device ->Install Package ...
  • - Cydia Impactor gives the error "Problem with the SSL CA cert (path? Access right?)" / "SSL connect error", what to do?
Cydia Impactor ->Impactor ->Insecure SSL and repeat.
  • - Cydia Impactor gives the error "Sign in with the app-specific password you generated. If you’ve forgotten to go to appleid.apple.com, what to do?
You have enabled " Two-factor authentication ", Create a password for Cydia Impactor -> Creating a password for the program , YouTube .
  • - What is a "semi-linked" jailbreak?
A semi-associated jailbreak provides access to the file system only until the first reboot or power failure. Thus, a semi-associated jailbreak requires the application to be restarted. Chimera ->"Jailbreak" which re-fills the files required for jailbreaking into the device and makes it load in jailbreak mode.
  • - If the jailbreak is “semi-connected”, will all tweaks settings be reset after a reboot or power failure?
No, all settings remain the same, just restart the application Chimera ->"Jailbreak" .
  • - How to remove a badge (red unit) from iOS settings?
Install from Sileo -> Badgemenot , the badge inside the settings is removed as follows -> Jailbreak iOS 12.x.x (Post i_Mobilka # 83493387)
  • - Is it possible to find out how the firmware is installed on the device?
Unfortunately not.

Attached Image


Changes in v1.3.9:
1. Increased probability of success sockpuppet3 (especially at 4K devices such as 5S and 6).
Changes v1.3.8:
1. Fixed installing nonces on A12 with iOS 12.1.3+
2. Fixed the problem with installing nonces on devices that did not use igetnonce.
Changes v1.3.7:
1. Supports receiving and configuring generator (shsh2) on A12 with iOS 12.1.3-12.2, 12.4.

Attached fileChimera-1.3.9.ipa(86,26 MB)

Change history
Changes v1.3.6:
1. Improvements to the SockPuppet exploit, which increase reliability and fix a rare crash that can happen shortly after the jailbreak process.
Changes v1.3.4:
1. Fixed an issue causing random reboots on iOS 12.2 and 12.4.
2. Fixed incorrect installation of Sileo on iOS 12.0 - 12.1.4.
Changes v1.3.3:
1. The sockpuppet 1.5 and sockpuppet2 exploits have been replaced with the sockpuppet3 exploit (thanks@umanghere).
2. Added support for iOS 12.4 on A7 & A8X devices.
Changes v1.3.0:
1. Added support for iOS 12.4 on A8 devices.
Changes v1.2.9:
1. Fixed problems installing certain packages (such as NewTerm or Anemone 3).
Changes v1.2.8:
1. Added support for iOS 12.4 on devices A9 - A11.
Changes v1.2.7:
1. Added support for sockpuppet 1.5 on A12 devices with iOS 12.0 - 12.1.2.
Changes v1.2.6:
1. Added sockpuppet2 for devices on iOS 12.1 - 12.2, increased exploit reliability. (12.0 - 12.0.1 will instead get sockpuppet 1.5; although they can use machswap (2) or voucher_swap).
Changes v1.2.5:
1. Significantly improved stability on iOS 12.2.
2. Fixed random hangs on 12.0 - 12.1.x.
3. Added thanks@NedWilliamsonfor sockpuppet.
Changes v1.2.4:
1. Added support for devices with A7 - A8 on iOS 12.1.3 - 12.2, including some beta versions of iOS 12.3.
Changes v1.2.3:
1. Added support for some beta versions of iOS 12.3 (beta 6 is incompatible).
Changes v1.2.2:
1. Fixed an issue that prevented v1.2.1 from jailbreaking A12 devices with voucher_swap.
Changes v1.2.1:
1. Fixed problems with the work of the exploit on iOS 12.2.
Changes v1.2.0:
1. Added support for devices with A9 - A11 on iOS 12.1.3 - 12.2.
Changes v1.1.0:
1. Sileo v1.1.5.
2. Fixed a bug due to which the Sileo icon did not appear after jailbreaking.
Changes v1.0.9:
1. Several stability fixes and optimization.
2. Sileo v1.1.2.
Changes v1.0.8:
1. Fixed a problem that prevented the Sileo icon from appearing after a jailbreak.
2. The rest of v1.0.8 is identical to v1.0.7.
Changes v1.0.7:
1. Re-jailbreak significantly accelerated (4 seconds instead of 12 seconds, tested with mach_swap2).
2. The rest of v1.0.7 is identical to v1.0.6.
Changes v1.0.6:
1. Improved jailbreak success level.
2. Fixed a problem in v1.0.5, which led to automatic recovery of RootFS.
3. Includes fixes v1.0.5.
4. Fixed most crashes of Bitwarden, Steam Link, Spotify, etc.
Changes v1.0.5:
1. Fixed a bug with the application "Mail".
2. Sileo v1.0.6.
3. Fixed a bug with the camera on A12 devices.
4. Fixed a problem with the black screen in step 2.
5. Increased probability of successful jailbreak.
6. Added support for machswap2 for A12.
-> Has been withdrawn, contains errors.
Changes v1.0.4:
1. Fixed non-working SSH.
Changes v1.0.3:
1. Added patch for RocketBootstrap.
2. Sileo v1.0.5.
Changes v1.0.2:
1. Fixed problems with jailbreak A12X iPad Pro.
Changes v1.0.1:
1. Fixed an exploit voucher_swap on beta versions.
2. Fixed the exploit voucher_swap on some iPad Pro.
3. Reduced IPA size by 32%.
Changes v1.0.0:
1. Release.
Older versions
Chimera v1.0.0
Attached fileChimera-1.0.ipa(95.68 MB)
Chimera v1.0.1
Chimera v1.0.2
Chimera v1.0.3
Chimera v1.0.4
Chimera v1.0.5
Chimera v1.0.6
Chimera v1.0.7
Chimera v1.0.8
Chimera v1.0.9
Chimera v1.1.0
Chimera v1.2.0
Chimera v1.2.1
Chimera v1.2.2
Chimera v1.2.3
Chimera v1.2.4
Chimera v1.2.5
Chimera v1.2.6
Chimera v1.2.7
Chimera v1.2.8
Chimera v1.2.9
Chimera v1.3.0
Chimera v1.3.3
Chimera v1.3.4
Chimera v1.3.6
Chimera v1.3.7
Chimera v1.3.8


checkra1n- semipegged Jailbreak iPhone devices (5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X), iPod touch (6G, 7G), iPad (Air, Air 2, 5 , 6), iPad Pro (9.7, 12.9, 12.9 (2G), 10.5), iPad mini (2, 3, 4)
running iOS 12 (12.3, 12.3.1, 12.3.2, 12.4.1, 12.4.2, 12.4.3, 12.4.4, 12.4.5)

checkra1n not supported for jailbreak devices with the processor A12 / A12X ->iPhone (XR, XS, XS Max), iPad Air 3, iPad Pro (11, 12.9 (3G)), iPad mini 5
At this point checkra1n only supports the installation of Cydia. Support for other package managers will be in the near future.
checkra1n - semipegged jailbreak, after repeated off / on the device, you will need to repeat the jailbreak using a PC.

Attached Image

Instructions for JB (iOS 12.3-12.4.5)
Create a backup withiCloud / iTunes Before using checkra1n.
I recommend to enter the device inDFUmode, I beg to clean iOS 12.4.5 and then make JB (jailbreak) - this will save you from a lot of bugs.
// 1. Linux
If you own enough knowledge, you can use any distro based on Debian, used as an example Ubuntu.
1. Download -> ubuntu-19_10-desktop-amd64.iso
2. Create a bootable USB flash drive with ubuntu-19_10-desktop-amd64.iso , instruction .
3. Boot from a bootable USB drive.
4. No need to install the system, enough to run Ubuntu from a USB drive, choose -> run Ubuntu
Attached Image
5. Open a terminal and type teams in turn:
Attached Image
->Internet is necessary
echo "deb https://assets.checkra.in/debian /" | sudo tee -a /etc/apt/sources.list

Attached Image
sudo apt-key adv --fetch-keys https://assets.checkra.in/debian/archive.key

Attached Image
sudo apt update

Attached Image
sudo apt-get install checkra1n

Attached Image
6. For start checkra1n You can use the command:
sudo / usr / bin / checkra1n -g

Attached Image
Or, find programscheckra1n and run for JB.
Attached Image
7. Connect your device to your computer, click "Start" .
Attached Image
->Options
Attached Image
Allow untested iOS / iPadOS / tvOS version - should be used if the version of iOS on your device is newer one that supports checkra1n.
Safe mode - should be used if you experience problems with the operation of the device after the installation of a tweak in this mode, you can remove the conflicting tweak and jailbreak normally.
Verbose Boot - active mode displays textual information about all processes occurring on the device at startup.
8. checkra1n notified of the need to enter the device into recovery mode, press «Next» The program will do everything automatically.
Attached ImageAttached Image
9. After the device in the recovery mode, checkra1n prompted to enter the device DFU mode, do it according to the instructions -> "Start" .
Attached ImageAttached ImageAttached ImageAttached Image
10. After the device in the mode of DFU , Checkra1n automatically carry out a jailbreak and download device.
Attached ImageAttached Image
11. Run the application checkra1n on your device, and install Cydia.
12. The result of all our actions should be the Cydia icon on one of the desktop pages on your device.
This jailbreak is considered "semipegged" after each turn on the device must be repeated jailbreak using a PC to work and Cydia tweaks.
13. Add repository -> https://xsf1re.github.io/repo/ and install MCPatch , Will establish tvOS 13 Beta Profile to block OTA update.
14. Add repository -> https://tigisoftware.com/cydia/ and install the file manager Filza file manager , if necessary, to be able to work with the iOS file system.
15. Install -> NewTerm 2 ( examples of possible commands ), a powerful terminal, the perfect companion to execute fast commands right on your device.
16. Add repository -> https://rpetri.ch/repo/ and update Rocketbootstrap (a library that allows tweaks to interact with isolated processes is necessary for normal operation of tweaks), install -> PreferenceLoader for the correct display of tweaks in the "Settings" iOS.

If for some reason you do not have Internet on Linux, download the archivecheckra1n beta 0.9.8 linux.zipUnzip and throw off the executable file ->checkra1n According to your CPU architecture (in most cases this x86_64) to stick with Linux.
Then do everything according to ->Jailbreak iOS 13.h.h (Post T0ugh # 93622195)

// 2. Linux + checkra1n (bootra1n)
github.com/foxlet/bootra1n, instruction.
// 3. Linux + checkra1n (checkn1x)
asineth.gq/checkn1x, instruction.

// macOS
Start checkra1n and act according to the instructions (Linux) with7 step.

/ * Do not delete anything from the iOS file system, it will not lead to anything good. To clean the system, use (neatly) ->iCleaner Pro. Do not try to install as many different tweaks as possible, this will not improve the performance of your system, install tweaks optimized for iOS 12, tweaks that you need for comfortable work. Be careful. * /
Tweaks
Programs from Cydia

List of tweaks that are compatible with iOS 12:
It is known that many extensions / tweaks cause problems due to the lack of proper compatibility with iOS 12.
Please be careful what you install! by@ Pwn20wnd
FAQ
  • - File manager does not see the root file system iOS.
Install from Cydia -> Apple File Conduit "2" (arm64 / KPPLess) .
  • - Which file managers to use for navigation in iOS?
We read -> File system navigation software
  • - Where are the data files / folders in iOS?
We read -> Directories in iOS
  • - How to remove jailbreak?
Enter the device into DFU , launch iTunes -> Restore .
  • - How to enter DFU mode?
We read -> [FAQ] Enter DFU mode
  • - How to enter Safe Mode?
We read -> Safe Mode
  • - How to install the application from the App Store / Cydia?
We read -> Installing * .deb and * .ipa
  • - Does jailbreak affect battery consumption?
Not! The battery consumption and device operation are affected by tweaks.
  • - What tweaks should be installed?
Only proven, optimized to work with iOS 12, tweaks from official sources.
  • - Can I install a third-party theme for iOS 12?
Yes, install from Cydia -> Snowboard / iThemer
  • - How to remove the "tails" (settings) tweaks?
We read
  • - How to detect conflict tweak?
Install from Cydia -> Cr4shed
  • - Some applications refuse to work normally in the presence of a jailbreak, what to do?
Add repository -> https://ryleyangus.com/repo/ and install a tweak from there -> Liberty / Liberty Lite
or add repository ->https://apt.geometricsoftware.seand install a tweak from there ->TweakRestrictor
or add repository ->https://opa334.github.ioset out tweak ->Choicy
or from a standard repository ->https://repo.packix.cominstall the tweak ->Tweaks Manager
  • - What is needed to install hacked applications?
You need to install -> Appsync . We read carefully the topic -> AppSync for iOS 5 - 12
  • - I always update the device over the air OTA (Over-the-Air), how to flash through iTunes?
Back up your data with iTunes enter device into DFU mode, run iTunes -> Restore .
  • - How to use Cydia?
We read -> Cydia. Instructions for use
  • - I have errors in Cydia, how to fix them?
We read -> Popular problems in Cydia and how to solve them / Cydia - Help
  • - The “Other” section has greatly increased, how to deal with it?
We read
  • - What is the identifier (Model ID) of my device?
Check out the topic -> Apple Device Model IDs
  • - What is the "semipegged" jailbreak?
Semipegged jailbreak allows access to the file system only until the first reboot or power off. Thus semipegged jailbreak gadget require connection to a computer and re-run the tool Jailbreak checkra1n ->«Start» ->«Next» ->"Start" which re-fills the files required for jailbreaking into the device and makes it load in jailbreak mode.
  • - If you jailbreak "semipegged" all tweaks settings after a reboot or power off reset?
No, all the settings remain the same, it is sufficient to re-run the utility checkra1n ->«Start» ->«Next» ->"Start" .
  • - How to remove a badge (red unit) from iOS settings?
Install from Cydia -> Badgemenot , the badge inside the settings is removed as follows -> Jailbreak iOS 12.x.x (Post i_Mobilka # 83493387)
  • - Is it possible to find out how the firmware is installed on the device?
Unfortunately not.

Attached ImageAttached Image


Changes in v0.9.8:
1. Came supportLinux.
2. Presented webra1n. This is an experimental web interface for checkra1n, transmitting the ncurses - interface terminal-based - directly to your browser, allowing headless devices (such as Raspberry Pi) represent the interface on the network.
3. Low-level patches are now handled by our brand new pongoOS, designed from the ground up for flexibility. More news on this front in the near future!
4. Added a whole new CLI, built around ncurses, which now supports FastDFU.
5. Added a new flag --version in the CLI for debugging.
6. Added new option in the GUI and the CLI, which enables you to configure a custom boot arguments.
7. Added the ability to skip the iOS checks that have not yet been formally tested.
8. Added support for iOS 13.3.1.
9. Appendix checkra1n no longer need to open the Internet.
10. An exploit may not work reliably on some devices, such as Raspberry Pi Raspberry Pi and the Zero 3.
11. When you try to jailbreak several devices, only the first attempt will be successful. Workaround: checkra1n rerun after each attempt jailbreak.
12. This release fixes many bugs that we can not track them.

Attached filecheckra1n beta 0.9.8.zip(15.44 MB)
Attached filecheckra1n beta 0.9.8 linux.zip(61.43 MB)

Change history
Changes in v0.9.7:
1. An error, due to which the GUI showed no change in the device modes.
2. Fixed a problem that led to the GUI crash when some jailbreak iPad models.
3. Added initial support for Apple TV 4K.
4. Cleaning OTA when downloading updates.
5. Added support for iOS 13.3.
6. Remove libimobiledevice as a dependency.
7. Correct obrabatka a situation where there is no access to the Internet when downloading tvOS.
8. Label Loader Added tvOS control item.
Changes in v0.9.6:
1. Fixed iPad 6 support.
2. Fixed a bug due to which A7 device reported an error in the event of success.
3. Fixed a bug due to which application icons to jailbreak appeared after using «Restore System» function Loaders.
4. Loader application more resistant to errors occurring after a long uptime.
5. Fixed a bug due to which the Loader and Cydia does not work with messages about the absence of the Internet on the Chinese iPhone.
6. Fixed a bug due to which Smart Keyboard iPad Pro disconnected.
7. Fixed a bug due to which fast charging does not work.
8. Added support for jailbreaking Apple TV.
9. Added support iPad 5, Air 2 and iPad Pro (9.7, 12.9).
10. Added support for iOS 13.2.3.
11. Redesigned command line interface from scratch.
12. Greatly improved Loaders speed.
13. redistribute loaderd and friends in a separate run demons to survive the reset user space and deleted insults on behalf of the demon.
14. Export database core and other useful things for developers (for more details see.jbctl).
Changes in v0.9.5:
1. Fixed an issue where the user can get out of your Apple ID.
2. Fixed a problem causing the delay MobileSubstrate initialization.
3. The problem with the battery configuration panel: We carefully investigated this issue and found that some of the tweaks and libraries that depend on some tweaks to cause this problem.
4. This update includes a new quick succession DFU. Log in DFU mode should now be safer and more reliable.
5. In this update improved substrate loading mechanism which improves the stability of the device.
6. If you have an error -20, re-do the jailbreak option without substrate, and see if it solves your problem removing tweaks.
Changes in v0.9.3.2:
1. Fixed a strange problem with user space on some devices.
Changes in v0.9.3:
1. Fixed a bug due to which biometrics are not working for some users.
2. Fixed a bug due to which the touch screen stopped responding for some users.
3. Fixed a bug due to which the Loader app could not be displayed on the desktop.
4. Fixed a bug due to which Smart Keyboard not working.
5. Fixed a bug due to which the rapid charging function did not work on some devices.
6. Fixed a bug due to which taptic engine did not work on some devices.
7. Fixed a bug which prevented some users downloaded the battery settings.
8. Case Detection, when loaded OTA update that has caused problems for some users.
9. The loading mechanism for the substrate has been rewritten from scratch to improve device stability.
10. The ability to boot mode without substrate in the form of options.
Changes in v0.9.2:
1. Fixed a bug due to which Apple Watch received no notification during the jailbreak.
2. Increased reliability entry into DFU mode.
3. Fixed a bug due to which checkra1n could not be used in macOS 10.10.
4. The ability to boot mode without substrate. To use this function, hold the Volume Up button, until the apples until the unit has finished booting. You can remove any tweaks that cause the problem and reboot to return to normal jailbroken state.
Changes in v0.9.1:
1. Fixed an issue which caused Loader app crashes when you install Cydia on iPad.
2. Fixed crash applications on MacOS, if not installed in English.
3. Fixed a problem where the iPad Mini was not working with the GUI.
4. Fixed an issue with the binary file scp.
5. This version clarifies to some errors, particularly errors -20, now offers recommendations for its elimination.
Changes in v0.9:
1. Release
Older versions
checkra1n beta 0.9
checkra1n beta 0.9.1
checkra1n beta 0.9.2
checkra1n beta 0.9.3
checkra1n beta 0.9.3.2
checkra1n beta 0.9.5
checkra1n beta 0.9.6
checkra1n beta 0.9.7
Theme Rules
  1. In this topic are allForum Rulessavagemessiahzine.com!
  2. If a forum member gave you good advice that helped you solve your problem, do not post a message with the text “Thank you! You are super !!!thank"by increasing reputation by clicking on the buttonAttached Image
    If you have less than 15 messages, click on the button.Attached Image(under reputation) and let us know who helped you, whom to put"+ ".
  3. Forbidden abuse of quoting (overquoting, overquoting). It is not necessary to quote fully opponent posts - just select the main points and press the buttonAttached Image
  4. Help make the branch cleaner and more useful! UseBy mod - buttons Attached Imagefor posting evaluation. Minus: flooding, offtopic, breaking the rules. Plus: useful posts, instructions, etc. So much easier and more convenient to keep the branch clean and tidy.Thank you for understanding!
  5. Before asking a question,MANDATORYuse the search on the topic in the upper right corner of the pageAttached Image, MANDATORYread the capREPEATEDLY.
  6. If you have a problem - describe it as you canmore! The more information from you - themorechances that they will help you!
  7. Messages that contain grammatical and / or syntactic errors can cause a negative reaction from forum members.
    Try hardwrite correctly.
  8. Any post off topic (offtop) or not carrying a meaning (flood), as well as questions, the answers to which are in the cap -will be deleted without warning

K
Dear jailbreakers!
List of tweaks compatible with iOS 12.0-12.1.2
List of tweaks compatible with iOS 12.0-12.1.2 (Chimera)
Be careful, not all tweaks are optimized for work with iOS 12!
After jailbreaking, all functions should work as usual. 99% of the problems are caused by user actions.

Important information:
͡Apple blocked unc0ver / Chimera jailbreak in iOS 12.1.3!
͡Apple blocked unc0ver / Chimera jailbreak on iOS 12.3!
͡Apple blocked unc0ver / Chimera jailbreak in iOS 12.4.1!
(͡ ° ͜ʖ ͡ °)

Deviation from the topic is prohibited by forum rules, therefore:
  • Installing hacked applications is discussed in the topic ->AppSync talk
  • Problems with tweaks, their performance is discussed in the topics section ->Programs from Cydia
  • Problems with Cydia solve the topic ->Cydia - Help


Post has been editedT0ugh - 20.02.20, 00:43
Reason for editing: v.4.1b



Rep: (9)
i_Mobilka @ 25.02.20, 12:06*
Install unc0ver through ReProvision or AltStore. With online services you will fall off and certificates at any time.

Clarification: set with an online service, you can, but then you need to re-sign him through ReProvision (the program does not install, and sign the application). AltStore - it's the same online service, but he, in his application, do not use other people's corporate certificates, therefore, according to him, it does not run the risk of certificates to be revoked.



Rep: (239)
* andrk1972,
Something you do not doponyali how to use AltStore, this program is set and sign the application. We do not need online services when using this application. I just went on with chekreyna ankaver 4.2.0.
Unc0ver downloaded directly from the phone (not necessarily signed) for example herehttps://github.com/pwn...uff/Undecimus/releases, At the end of the download Tapan on the downloaded file and select "Copy to AltStore" and wait until the application is copied to the AltStore and install. I still did not connect the machine cable to the notebook.

Post has been editedi_Mobilka - Today, 01:08



Rep: (0)
Released version 4.1.1 beta is not unlike the previous version 4 runs.



Rep: (9)
i_Mobilka @ 25.02.20, 23:46*
AltStore, this program is set and sign the application. Online services are not needed

I knew about this feature. But when I opened them on the iPhone app, it seemed like, for example, appcake application, ie it also has an online source, but from there you can install only one app now. That's what I forgot, when dialed last post, so you are basically right now its main feature - the signature of third-party applications.
PS application by appcake too, in addition to its main online service sign-party applications, but also for its funky certificates



Rep: (20)
andrk1972 @ 26.02.20, 00:32*
does not install, and sign the application)

But what and how much she signs?



Rep: (2)
i_Mobilka @ 25.02.20, 14:06*
Reprovision

And what is there to do it?



Rep: (695)
avaraa @ 26.02.20, 09:04*
And what is there to do it?

Reprovision



Rep: (20)
Does anyone have any experience on unc0ver 4.2 xr12.4?
Whether problems arose?



Rep: (239)
ma-xik @ 26.02.20, 08:14*
But what and how much she signs?

Signature made a 7-day free certificate for your personal Apple ID, and this ensures that the certificate is not revoked by Apple early. Camo AltStore application is signed by the same 7-day certificates under your Apple ID.
In fact it is similar to Cydia Impactor method, only the working and more convenient.



Rep: (48)
i_Mobilka @ 26.02.20, 13:41*
7-day certificate

And at the end of 7 days, what will happen? You need a new account to create and left them to sign?



Rep: (9)
* pbPACMAN,
just re-sign
Reprovizhen do it automatically



Rep: (239)
* pbPACMAN,
After 7 days in the case of rebooting the machine, unc0ver starts. Why a new account? Before the expiration of 7 days will automatically be perepodpis or manually.
If interested, install the app and see for yourself how it works.



Rep: (8)
v4.2.1 Release

Last updated at: 02/26/2020

02/26/2020 - v4.2.1 was released for production with the following changes:
Fix a bug that caused unreliability in starting up substitute
Fix an issue that broke battery settings and caused extra battery drain
Undecimus-v4.2.1.ipa

tested on iPhone 6s Plus ios 12.4

Post has been editedsexytropic - Today, 16:45


Full version    

Help     rules

Time is now: 26/02/20, 19:53