Netis released a test firmware, I have about a)) who want to test?

ha2507, Only on their router) If provided)

Given the negative experience, perhaps the right decision, the router that was left for me to test does not accept the new firmware, it has 1.5.566 on it and neither here nor there)) although 1.5.72 the one that was last on the site may also not be flashed.

I support, I don’t really want to fight with Valsis again and then change again in the store ...

ha2507 That is, they still work on the firmware. I don’t even know if it’s so bad for them with programmers. Wouldn’t it be easier to give everything to the free projects dd-wrt, openwrt?

Can you post the change log here?

Honestly, I don’t have a log, I’ll try to ask Netis.

: rolleyes: Then I don’t even know - all the more dumb to experiment) ...
And they do not give any advice, instructions for your router, how to reanimate it? Maybe what kind of transit firmware should I write, lowering? Or is it somehow possible to sew through the programmer? I had an ASUS router, there was an instruction from the manufacturer on how to reanimate a "dead" (from unsuccessful firmware) router ...

Asked until answered

Here isarticlehow to create an FTP server using Windows. The setting itself is a little "confused", but everything works without problems. In any case, there is no described problem.

Post has been editedRomma74 - 07.03.19, 12:03

Those wishing to test: D
Drop the info where to download the firmware!

10 days have passed since the appearance of the test firmware ... And silence ... Has anyone really tried? No, I understand the ethics of the tester, etc., but at least a few words ... Like everything is bad, everything is very bad, not everything is so bad ...

... And silence ... Well, wait ... The Netis representative on Rozetka.ua on March 21 confirmed the testing of the new firmware, promised as soon as possible ...

Good afternoon! Tell me how to configure the ftp server, the wifi network works, the computer also works via cable. The problem as soon as I start copying to a disk or flash drive connected to the router (in turn) freezes and goes into reboot. Provider Rostelecom.

Who knows what the default password is, I can’t put the password on the router.

You don’t put the password on the router, this is one of the most egregious bugs of the available firmware ... The previous attempt to eliminate this bug (and add something else) ended in disastrous firmware V1.5.572, details can be found in the reviews on our router on Rozetka.com .ua, something was mentioned in this thread as well ...
It seems that the next firmware was piled up, now they seem to be testing it ... There is no information on the test results. Waiting for ...
Yes, there are problems with ftp too, lookhttps: //rozetka.com.ua...n=admitad#tab=comments

Post has been editedradist_serg - 31.03.19, 14:14

I received firmware from support service today. Not yet set.
IMPORTANT! They specified if I had version V1.5.572, I don’t think it was just like that! ONLY AT YOUR OWN RISK !!!


N1.zip(7.95 MB)

Well, it seems that the movement has gone ... I really look forward to first impressions of the firmware (I think that not only me) ...
Threat. And what firmware do you have - factory or 572?

What firmware do you have? It is not clear whether to install this firmware on lower versions, or only on 1.5.572?

Today came a response from tech support
Dear Victor, thank you for contacting us. We are happy to help you.


Your comment: “Netis n1 AC 1200 firmware: Netis (N1) -v 1.3.2325 This problem cannot be set to the password of the router settings, via FTP server: you cannot add others to the user, and it does not work 3-4 days after rebooting to restart not possible. ”

We apologize for the wait.

I recommend that you upgrade to the latest version of the router software.

In order to carry out this operation you need to do the following:

Download the files that are attached in the attachment to the PC;
Go to the router settings (use netis.cc or 192.168.1.254 by default, username: guest, default password: guest @ XXXX (XXXX is the last 4 values ​​of the MAC address of the router), then Advanced, then “System” à “Update” BY";
We upgrade from N1 v.0 to N1 v.1 in three stages:
Go to the router settings (use netis.cc or 192.168.1.254 by default), then Advanced, then “System” à “Software Update”
Download the file “fw.middle.tw572.bin” to the router;
We carry out updating;
We are waiting for the installation to complete;
After successful installation of the update “fw.middle.tw572.bin” we go to the router settings (see point 2. à “Factory settings.”), Do a factory reset;
Waiting for the completion of the operation.

3.1.1. Go to the router settings (use netis.cc or 192.168.1.254 by default, username: guest, default password: guest @ XXXX (XXXX is the last 4 values ​​of the MAC address of the router), then Advanced, then “System” à “Update” BY";

3.1.2. Download the file N1_RUSSIA_V1.5.572.bin to the router;

3.1.3. We carry out updating;

3.1.4. We are waiting for the installation to complete;

3.1.5. After the successful installation of the update “N1_RUSSIA_V1.5.572.bin” we go to the router settings (see point 2. à “Factory settings.”), Do a factory reset;

3.1.6. We are waiting for the completion of the operation.

3.2.1 Go to the router settings (use netis.cc or 192.168.1.254 by default, username: guest, default password: guest @ XXXX (XXXX is the last 4 values ​​of the MAC address of the router), then Advanced, then “System” à “Software Update”;

3.2.2. Download the file "v1.5.594_en_0307" to the router;

3.2.3. We carry out updating;

3.2.4. We are waiting for the installation to complete;

3.2.5. After the successful installation of the update “v1.5.594_en_0307” we go to the router settings (see point 2. à “Factory settings.”), Do a factory reset;

3.2.6. We are waiting for the completion of the operation.

Done!

In order to avoid incorrect installation, please clearly follow the steps in the instructions!

Please inform us of the installation results.

If you are faced with any other unforeseen situation or you have any questions, please contact us and our support team will help you with the necessary information.

Thank you for contacting us. We are always happy to help you.

Best regards,

cid: [email protected]

NETIS SYSTEMS CO., LIMITED

--------------------------------------

Technical Support Specialist

Mail: [email protected]


fw.middle.tw572.zip(6.49 MB)
N1_RUSSIA_V1.5.572.zip(7.09 MB)
v1.5.594_en_0307.rar(7.95 MB)


Post has been editedvektor74 - 16.04.19, 19:06