Makshow ,
Thank you very much for your review. Never disappointed that I ordered it. For me it will be all the same revolution after pn3pro)))

Ps I personally do not really need a camera myself)

Makshow,
Do it!

Excellent camera review, everything is clear and to the point.

Makshow, now a video review

https://begadget.site/
Here is a lot of interesting things about Redmi Note 7 Reviews, camera comparison.
The main thing is that when using the Google camera, there are no “nests”,on a yellow background with artificial lighting.

Post has been editedmikmikls - 12.03.19, 20:32

A question of this nature: is it necessary to somehow customize the gkkam from the header or is it normal by default?

Makshow,
Show the settings of the noise version 6

ForWhat , I did not set up the version 6 shumodav, everything is out of the box.

Makshow, thanks for the work you've done! What mode was used during the evening shootings in the stock camera? HDR or night?

Gnosotochki here are not suppressed by anything, neither the processor of the sensor, nor the driver, the fact that they are not so strongly expressed, this is a side effect of the association of pisels. Only one out of four pixels is used for phase autofocus; as a result, when combining 4 to 1, the remaining three mask the problematic phase pixel, but not completely, because they remain noticeable under certain conditions.

Antuanelli,
On the Sony camera, these points will not be?

Saun extended HDR +. Night mode requires some kind of support, otherwise the photos are worse than on cars. But it will be pleasant for lovers to shoot from a tripod that the RN7 supports shutter speeds of up to 16 seconds (max 3 has 1/3 of a second) and exposure compensation up to +/- 4.0 EV (not more than 2.0EV on most phones).

Antuanelli In general, these points are visible only with a minimum noise level and with a maximum increase in cropping. Here is an example: from the bottom of the screen 5.3 with reduced noise, from the top 6.1 on the Xtrme (Xlib) v2.

If you do not look for points on the top photo, you will never find the usual light noise that can be suppressed with one setting.
1. We take the freshest of working 6.1 cameras (from Xtrme, for Mi9):
MGC_6.1.021_BSG_Arnova_TlnNeun_V1.3.030119.0645_mi9.apk(120.14 MB)

2. Go to settings - advanced - setting noise reduction - Enable HDR + denoise and set HDR + denoise multiplier Back to 130%.

Config file with 130% noise. Throw in (Internal memory) / GCam / Configs, use double tap on the black area near the shutter button.
RN7 config for 6.1 XtrmeMi9.xml(7.88 KB)


Post has been editedMakshow - 13.03.19, 20:24

Good afternoon, can anyone take a couple of photos on the front, please?)

For some reason, does not complete the processing when shootingin the dark or with poor lighting with enhanced hdr and flash. Constantly spinning Processing and all. You did not have this?

nii + RoverPC R5 Yes, I had to give the camera all the permissions and set No restrictions on monitoring activity or saving battery (this is where the default MIUI Smart mode). As I understand it, the firmware sees that the program in the background loads the entire processor and nails the activity, so the HDR + processing hangs.

Upd: I tested it again - indeed, with a photo with a flash, a notification hangs on Processing HDR +, but you just have to hide the camera application or at least enter the camera settings, as the processing continues and runs normally. I do not know what this may be connected with.

Post has been editedMakshow - 12.03.19, 23:54

Makshow Dear, please customize screenshots. What where twisted
And I could not find your recommended lib

Post has been editedstSayGoodbye - 12.03.19, 23:57

stSayGoodbye In tests, almost everything was out of the box. The current settings for the camera from Mi9 (a couple of posts above, with 130% noise level) here:
RN7 config for 6.1 XtrmeMi9.xml(7.88 KB)

Liby of this camera (in Russian they can be signed differently, since the foreign author does not rule the Russian inscriptions):


Post has been editedMakshow - 13.03.19, 20:24

I used to think that it would not be, but now there is no such certainty, it is necessary to get pictures taken by a Hindu device.

If you ever make a full-fledged 48Mp, then it will be very difficult to hide these gnomes.
It is depressing that these points can be completely removed completely, and without losing the chromaticity and without twisting the noise level to the maximum, it is just necessary that this be done at the driver level, but the Chinese probably will not do anything, because The device is budget and it is not profitable for them to shoot at the level of flagships.

On a yellow uniform background, test for dots, please. With min shumodavom, of course.

Post has been editedfail_unsafe - 13.03.19, 08:45

fail_unsafe , here's a light yellow wall and a bright yellow leaf. Shumodav disabled, used gkkam 5.3.

On the light yellow grid of phase sensors can still be seen, on a bright yellow anymore.