Assistant
REPLY |
Oukitel WP2 - Discussion | Smartphone, 6.0 " |
Message#1 15.12.18, 18:29 | ||||||||||
Local [online] Group: Friendssavagemessiahzine.com Messages 126 Check in: 08.05.17 Reputation: 7 | DiscussionOukitel WP2 Oukitel WP2, WP2 Discussion �
Specifications Smartphone with IP68 protection class, screen diagonal 6 ', fingerprint scanner and FaceID. ● Display: 6.0 inches, 2160 x 1080 pixels ● CPU: MTK6750T 4 x Cortex-A53 1.5 GHz and 4 x Cortex-A53 1.0 GHz ● System: Android 8.0 ● RAM + ROM: 4 GB + 64 GB ● Camera: rear camera 16.0 MP + 2.0 MP + front camera 8.0 MP ● Sensors: gravity sensor, light sensor, gyroscope, geomagnetic sensor, proximity sensor ● SIM card: 2 Nano SIM cards or 1 Nano SIM card and 1 TF card ● Functions: GPS, NFC ● Bluetooth: 4.0 Networks: ● GSM: 850/900/1800/1900 MHz ● WCDMA: 1/8 band ● FDD-LTE: 1/3/7/8/20 band Instructions for disassembling the device Flashing process Thank you allexnew Oukitel WP2 - Discussion (Post by allexnew # 80657782) Firmware file ⤵️//savagemessiahzine.com/ pages / g ... DmK7RYOXq9g & e = 78527474 Getting root - in detail, step by step Useful patches Firmware ResurrectionRemix OOS (GSI) The process of replacing the dynamics of the call A pair of speakers was ordered on Ali and cost about 200 rubles. https://aliexpress.com/item/-/32808310957.html You can still see here.https: //www.aliexpress...e3-848d-8d50a1bd4680-0 Or search by yourself. We unscrew the screws that secure the back cover. Remove the cover. Gently cut the sealant around the perimeter of the installed speaker with a knife. Carefully remove the speaker from the socket. Remove the speaker cover, I have it left in the nest. Remove the old sealant. Install a new speaker in a niche. Seal the perimeter of the speaker set with B-7000 glue. We try to prevent the glue from falling on the speaker contacts. My final version turned out like this. Putting it in the reverse order, testing. Subjectively, the sounding became better, the membrane did not install, I did not want to look for a conductive material. If this dynamic is not enough for a long time, I will experiment with the second one. I hope someone helped. Successes, friends! A little bit about the fingerprint scanner A possible solution to the problem with the failure of the fingerprint scanner is reset to factory settings. The unfortunate location of the scanner does not allow comfortable work in the Samsung Internet browser and some other programs. Exit-look for a replacement / analogue of these programs. There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links. Post has been editedsagitt67 - 11.05.19, 17:56 Reason for editing: Disabling the NFC icon from the top tray | |||||||||
Message#42 22.12.18, 06:17 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1715 Check in: 03.09.07 Oukitel K10000 Reputation: 118 | |
Message#43 22.12.18, 14:45 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 114 Check in: 29.12.07 Reputation: 2 | Xposed 26 is incompatible (yet)! And how to live now? -------------------- K10000->K10000Max>WP2 |
Message#44 23.12.18, 07:53 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1715 Check in: 03.09.07 Oukitel K10000 Reputation: 118 | |
Message#45 23.12.18, 16:14 | |
a guest [offline] Group: Users Messages 4 Check in: 19.01.12 Reputation: 0 | SP Flash Tool v5.1520.00.100 swears on the scatter-file from the laid out firmware. What version is needed? Is it possible to somehow convert the scatter for this version (under Linux like there is only such FT available)? P.S. Found FT fresh, read. Post has been editedfoxmulder32 - 23.12.18, 16:47 |
Message#46 23.12.18, 19:44 | |
Visitor [offline] Group: Active users Messages 16 Check in: 26.12.12 Reputation: 0 | Guys, the problem has arisen, the phone has warmed up and as a result with the display that who can tell? display change? The phone starts up, you press the lock button, the display glows, no pictures at all like poke, when you press the lock again, you hear a lock sound :( Post has been edited5_6 - 23.12.18, 19:44 Reason for editing: editing |
Message#47 24.12.18, 06:49 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1715 Check in: 03.09.07 Oukitel K10000 Reputation: 118 | With such information Oukitel WP2 - Discussion (Post 5_6 # 80345208) you can hardly suggest something. It itself - does not happen ... -------------------- It is not enough to read - you must be able to understand what you read. |
Message#48 24.12.18, 14:14 | |
Novice [offline] Group: Moderators Messages 1978 Check in: 29.04.13 Samsung Galaxy S10 + Exynos 8 GB Reputation: 429 | M -------------------- |
Message#49 25.12.18, 17:50 | ||||||||
a guest [offline] Group: Users Messages 4 Check in: 23.10.09 Samsung WiTu SGH-i900 Reputation: 1 | https://mega.nz/#!%20W…n7V4zhyEHNcDmK7RYOXq9gThe firmware that the vendor has thrown off to me, though it looks like it is no different from the previous one, which I posted here (I found it on the forum and tried it out. Working. Thanks to the person for putting it out). The essence of the correspondence with the seller that calls himself an offspring of the oukitel lies in one problem. The fingerprint scanner stopped working after a week. Disappeared from the menu. Opening the smart did not reveal any problems, the loop was in place. Disconnected - connected, the result is zero. And yes, I did not drop it, I drowned it, Moris and did not do anything else. Reset and many other dances with a tambourine (there are many of them on the forum)) did not solve the problem. I was on the off-line version (although I understand no others), the result is zero. The seller offered to reset the system through the recovery system and clear the cache, but in the standard recovery the functionality comes down to tests, just reset and reboot. Moreover, it seems that the seller himself does not know about it ... By the way, I was able to flash the flash tool 5.1624, or 5.1352.01 I do not remember exactly. These are the last two, which I left on my computer, it means one of them), I tried 10 pieces ... I did not find a suitable twrp yet, there is no xda. By the method of "spear" something is scary, but for now it is))) I am waiting for more offers from sold))) | |||||||
Message#50 25.12.18, 19:35 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1715 Check in: 03.09.07 Oukitel K10000 Reputation: 118 | Disappeared from the menu. Opening the smart did not reveal any problems, the loop was in place. Disconnected - connected, the result is zero. Rather, all the same, a hardware error. 1. Ring the loop (the appearance does not say anything) and, if possible, the track after the connector. 2.Replace scanner Post has been editedkrop - 25.12.18, 19:57 -------------------- It is not enough to read - you must be able to understand what you read. |
Message#51 26.12.18, 06:20 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 114 Check in: 29.12.07 Reputation: 2 | Doctor, small breasts are in fashion, and I have a big one. What to do? Wear what is ... :) Her Not our method. There is a link to the xposed installer of the author in the description of the xposed module for magisk. With him everything was set. Gravity works. But xprivacy and pbmc do not go under 8. Who reassigns the buttons with what? -------------------- K10000->K10000Max>WP2 |
Message#52 26.12.18, 10:58 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 96 Check in: 09.09.11 Reputation: 0 | Good afternoon. He raised the issue with k10000, then k10000 pro. The prints button works by itself in your pocket, while you take it out - the result of too many unsuccessful attempts and even the expense due to vibrations affects. There is no way to configure the button in such a way that it becomes active is valid only after pressing the unlock button? |
Message#53 28.12.18, 09:55 | |
a guest [offline] Group: Users Messages 8 Check in: 30.11.11 Reputation: 1 | [email protected], 17:50 https://mega.nz/#!%20W…n7V4zhyEHNcDmK7RYOXq9gThe firmware that the vendor has thrown off to me, though it looks like it is no different from the previous one, which I posted here (I found it on the forum and tried it out. Working. Thanks to the person for putting it out). The essence of the correspondence with the seller that calls himself an offspring of the oukitel lies in one problem. The fingerprint scanner stopped working after a week. Disappeared from the menu. Opening the smart did not reveal any problems, the loop was in place. Disconnected - connected, the result is zero. And yes, I did not drop it, I drowned it, Moris and did not do anything else. Reset and many other dances with a tambourine (there are many of them on the forum)) did not solve the problem. I was on the off-line version (although I understand no others), the result is zero. The seller offered to reset the system through the recovery system and clear the cache, but in the standard recovery the functionality comes down to tests, just reset and reboot. Moreover, it seems that the seller himself does not know about it ... By the way, I was able to flash the flash tool 5.1624, or 5.1352.01 I do not remember exactly. These are the last two, which I left on my computer, it means one of them), I tried 10 pieces ... I did not find a suitable twrp yet, there is no xda. By the method of "spear" something is scary, but for now it is))) I am waiting for more offers from sold))) [attachment = "14831943: Screenshot_20181225-210843.png"] [attachment = "14831944: Screenshot_20181225-210851.png"] [attachment = "14831942: Screenshot_20181225-210900.png"] [Attachment = "14831941: Screenshot_20181225-210910.png"] [attachment = "14831946: Screenshot_20181225-210922.png"] [attachment = "14831947: Screenshot_20181225-210934.png"] [attachment = "14831945: Screenshot_20181225-210950.png"] It was the same helped reset to factory settings through the settings |
Message#54 28.12.18, 12:06 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 83 Check in: 28.01.09 Fly PC100 Reputation: 8 | Obtaining root rights Oukitel WP2. !!! More detailed instructions with pictures here. I confirmrutting methodfrom userklud. Everything works withMagisk Manager. A little more detail about the sequence of actions (the firmware itself is needed, therefore, its preliminarydownloadThe SP Flash version is 5.1844.00.000. Implied thatVCOM / PRELOADER driver and ADB driverYou have already set): 1. Flash firmware OUKITEL_WP2_V15_20180910 via SP Flash, if you have an older version. I she was in stock. 2. Make a backup of the boot section by offset from the file scarlet from the original OUKITEL_WP2_V15_20180910 firmware, and it’s better to make a full backup of your phone so as not to shed tears when screwingusing the instructions - # 1 Instructions for creating a full backup ROM phone. Be sure to do before the firmware!. Do not be lazy to do in spite of the fact that it will take a decent amount of time. It took me about 2 hours. 3. Download files frommessages klud. His patched boot from the OUKITEL_WP2_V15_20180910 firmware version, the one that is needed. If you want to do everything with your own hands, then we take the manager MagiskManager-v6.1.0.apk, throw it and your boot on the phone. We put the manager on the phone and use it to patch the boot image. Patched image back to the computer. 4. Important (otherwise there may be SP Flash error -S_BROM_CMD_STARTCMD_FAILwhen trying to upload a patched boot to the phone: Reboot the phone disconnected from the computer, turn it off, wait a couple of minutes. 5. Replace the patched boot instead of boot from the original firmware (rename the original boot.img to, for example, boot_orig.img, and patch the patched boot next to rename to boot.img). 6. In SP Flash, download the file from the original firmware. Remove the daws from all items except boot. Select "Download only" from the list and press the "Download" button and connect the switched off phone to the computer. If an error occursS_BROM_CMD_STARTCMD_FAIL- disconnect the phone from the computer and turn it on. You may have to press the power button for a very long time. I held it for about 30 seconds before the body turned on. I thought it was all, the phone went wrong. Turn off and try to repeat the steps from p.6 again. 7. After the firmware, turn on the phone and install the Magisk Manager directly from the Magisk Manager itself, it again picks in the already filled buta - there are some updates. 8. Reboot, use. Pioneerkludall thanks and advantages in reputation PS I did everything on Windows XP, klud did everything on Windows 10. PS2 By the way, I was never able to install the MTP driver - neither on Windows 7, nor on XP. I took two hours off - then spat in the end. A little later, check how things are on linux. PS3 If during the operation of the phone you make a full reset, then you need to re-install MagiskManager-v6.1.0.apk and install the add-ons in it that it asks. Post has been editedallexnew - 19.03.19, 12:20 |
Message#55 31.12.18, 11:22 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 130 Check in: 09.10.11 Reputation: 2 | Yesterday I tried to take pictures with a camera, something I did get full g. In the settings, everything is at its maximum. How do you shoot? |
Message#56 31.12.18, 11:24 | |
User [online] Group: Friendssavagemessiahzine.com Messages 83 Check in: 12.07.13 Oukitel K5000 Reputation: 1 | |
Message#57 31.12.18, 12:58 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 130 Check in: 09.10.11 Reputation: 2 | [email protected], 11:24 Pechalka. And praised, from Samsung 16Mp. |
Message#58 31.12.18, 13:20 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1715 Check in: 03.09.07 Oukitel K10000 Reputation: 118 | This is not a camera, but a secure power bank with a monitor and the ability to dial and access the Internet. No one either as a photo-camera device or as a media center has not positioned it. -------------------- It is not enough to read - you must be able to understand what you read. |
Message#59 31.12.18, 13:47 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 130 Check in: 09.10.11 Reputation: 2 | [email protected], 13:20 ... This is not a camera, but a secure power bank with a monitor and the ability to dial and access the Internet. No one either as a photo-camera device or as a media center has not positioned it. Yes, I beg you! My old oukitel 4000 shoots at times better! I did not expect from him that this camera would be, but Karl! With frontal, that the rear camera is filmed equally practically. By the way, why behind 2 cameras? On the attached photo from the official seller. |
Message#60 31.12.18, 13:57 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1715 Check in: 03.09.07 Oukitel K10000 Reputation: 118 | So fashion is now ...What you need to know about the dual camera, choosing a smartphone And in general, this is a past stage. How do you like it (5 cameras): (Nokia 9) And trust advertising somewhat inconsistent. Especially advertising companies level Oukitel. Post has been editedkrop - 31.12.18, 20:22 -------------------- It is not enough to read - you must be able to understand what you read. |
Message#61 01.01.19, 09:52 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 74 Check in: 05.08.13 Reputation: 1 | Norm apparatus for 13 rubas. Two three days safely holds. The camera is tolerable. The program itself is tupavata. In spit mark a bunch of all sorts. Before that, Max was. Year finally, without any problems, he left and sold more. This luminescent current is scratched little by little. Nfs works on 5 yes as a plus. Glass immediately ordered 10 pieces for 58 rubles. Mine regularly with soap once a week. The work is dusty. The touch on Max was triggered by light touches on vp2, sometimes you need to press right. The finger scanner on Max Max Chotche seemed to me and yes, the layout backwards seems more relevant to me. Sideways purely marketing. You take it and it works. Recognition of muzzle face and that works more clearly. The connection is good. The screen is good. Movies games agon. Zhipies standards also. In general, the price is quality gun. Max did not have enough paycheck. On this wireless charging))))) |
mobile version | Now: 05/19/19, 07:42 |