Accessories forXperia xz3
Akatsuki H8416, H9436 dual, H9493 dual
Description | Discussion пїЅ | Firmware пїЅ | Accessories пїЅ | Camera talk пїЅ

• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been edited4Serg13 - 17.05.19, 11:06

I will share, very pleased cover-pad:


took here:


Does not slip in hand, size does not increase. Plastic is very soft and pleasant to the touch. When double tapas on the edge does not interfere at all, everything works fine.
With the original wireless charging, the WCH20 works fine.
Satisfied and recommend :)

Thanks, ordered! Plus sign set!

Brosco glass is better not to take. The first parties did not fit at all, as if for Samsung, they were sticking out along a short margin, without any bending. New ones seem to be fully bonded, but dust is clogged under them from nowhere, although it fits tightly everywhere. Three times already changed. Everything is the same. I already feel uncomfortable going to Sony Center again. But on the other hand, the money is paid, and the glass: censored:

Not full-adhesive, but full-screen. There, the glue layer is only around the perimeter, but the holes around the loudspeaker, camera, sensor are not taped, and through them under the screen dust climbs. Well, plus the air gap between the screen and the glass looks terrible - the gray color of the screen and glare terribly. In the Brosco they say that there are no complaints about these glasses, but it seems to me that this is just awful. But they have no other glasses on the XZ3.

If it would be useful to someone, I ordered a cover-pad Nillkin Frosted Shield. Sat perfectly, the material is hard soft-touch plastic. The back surface is covered with small bumps, so the phone does not slip. Very convenient to use, all holes fit well. Krch, I recommend: rofl:

Friends, and who took what fast wireless charging or plans? Share it.

I tooksuch. It charges perfectly, it shuts off normally when you take off the device. Even fast charging is.

Extreme Czech Love Mei Review
Purchased on Ebay for 26 USDhttps://www.ebay.com/i…peria-XZ3/323516682604
There are also other colors.
The goal is to protect the smartphone when riding a hardcore bike.

Height is about 18 cm.!
Width is about 9 cm. !!!
Weight with a smartphone more than 300 g (there are only jewelry scales)

By setting up the phone I advise
- turn on bright colors
- reduce the width of the on-screen keyboard
- use the setting of bright screen tones
- use gloved mode to increase screen sensitivity
- turn off the sensor, It is useless in such a case.

General impressions
The case looks very brutal. No one would guess that inside XZ3
You can't put it in a suit pocket or jeans
The case itself is made very high quality. Rubber and metal (there will be problems in winter)
With the passage of any frame of the metal detector, an alarm signal is heard
With photography, work wifi, bluetooth, cellular communication - there is no difficulty
The glass is covered with dots (visible when the display is not working)
There is no oleophobic coating, a cleaning cloth was put in the kit
Assembly is simple, but the screws are small and easy to lose. Included are spare
It is not very convenient to put on charge, because distance from the plug to the connector is large

Tests:
- dropped on linoleum and laminate from a height of 1 m.
- bathed in the bath
Tests passed without problems

Who is suitable?
Lovers of extreme sports, hunters, fishermen
Who is tired of the XZ3 design
Who cares about their safety, as the last argument in a collision with the enemy. A blow to the face and your opponent will get a lot of discomfort: lol:

P.S. I already wanted to buy a second smartphone for cycling, but this case solved this problem.
Only one minus is the time of disassembly and assembly and the need for special tools. Screws have a cunning head.

Post has been edited119270 - 17.05.19, 11:06

For skiing - possible. From experience: smart fell in this case from the height of a household table on the floor tiles.
Glass MEI in the trash. You can forget about the fingerprint scanner. Heavy contraption.


Post has been editedicemax - 24.07.19, 15:25

On the XZ, the USB type-C broke down at one time, the cable in the socket stopped fixing.
I learned, but late, about the magnetic cable.
Decided not to repeat the sad lesson with XZ3
Bought this: USB-Type-C cable RC-095a Gravity Magnetic Gold 1m, REMAX
A little blumba is always in the socket of the smartphone.

But alas, like all non-original cables, it does not transmit data. How do they (sony) do this?

No normal protective glasses as I ponyal.podelites reference to who put the glass normal to kleilos around the perimeter.
Or need to buy a hydrogel

Lech69 , Use a hydrogel, for the first 9 months worth of the latter, scratches do not interfere, but there are pastes, oleofobka too quickly erased in general norms

Post has been editedmyrzykov - 26.09.19, 02:55