REPLY
> Keenetic Duo (KN-2110) - Discussion | [wifirouter, adslmodem]
enpa
Message#1
10.12.18, 17:46
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Keenetic Duo (KN-2110)- Discussion
Attached Image

Information
Description
  • Product Name:DSL
  • Part Number:KN-2110-01RU
  • NDM HW ID:KN-2110
  • Any Internet tariffs up to 100 Mbps, via ADSL, VDSL, Ethernet with IPTV and SmartTV lines
  • Wi-Fi AC1200 2.4 + 5 GHz with amplifiers and high-precision 5 dBi printed antennas
  • USB port for 3G / 4G / LTE modems, disks, printer or DECT station
  • File server, DLNA, Time Machine, standalone torrent client Transmission
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment
Additional photo
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

foto by enpa
Specifications
Main characteristics

The index of the model is KN-2110
Processor - EcoNet EN7513T MIPS® 34Kc 900MHz, 2 streams
RAM - Nanya NT5CC64M16GP-DI 128 MB (DDR3)
Flash Memory - ESMT F50L1G41A 128 MB (SPI-NAND)
Wi-Fi 2.4 - Yes
Wi-Fi 5 - Yes
Class Wi-Fi - MediaTek MT7592N (PCIe Gen 1), MediaTek MT7612EN (PCIe Gen 1)
Antennas - 5dBi
Ports - 4 x 100 Mbit / s

Wi-Fi / WPS button ✔
FN button - Yes
USB Ports - 1 x USB 2.0
3G / 4G connectivity - Via compatible USB modem
DSL connection - Built-in ADSL2 + / VDSL2 modem
Telephony support -C Keenetic Plus DECT
Modes of access point, amplifier, adapter ✔

Performance

2.4 GHz Wi-Fi network speed - 300 Mbps
5 GHz Wi-Fi network speed - 867 Mbps
IPoE / PPPoE Routing - Up to 95 Mbps
L2TP / PPTP Routing - Up to 95 Mbps
Read from USB disk - Up to 12 MB / s

DSL protocol support

Automatic selection of ADSL modulation ✔
G.dmt ✔
G.lite ✔
ADSL2 ✔
ADSL2 + ✔
Annex A ✔
Annex M ✔
Maximum number of PVC 8
VDSL2 support ✔
G.vector support
VDSL 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a profiles

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

WEP / WPA-PSK / WPA2-PSK Network Protection ✔
Support for additional guest Wi-Fi network ✔
MAC access control ✔
WPS Quick Setup ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
Transmission torrent client ✔
File server ✔
DLNA server ✔
UDP to HTTP proxy ✔
FTP server ✔
Print server ✔
IPSec VPN Client / Server ✔
PPTP VPN server 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
AdGuard ad blocker ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 159mm x 110mm x 29mm
Mass of the device - 248g
Operating temperature range - 0-40 ° С
Humidity of the ambient air during operation - 20% - 95% (no condensation)
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Telephone cable ✔
DSL Splitter ✔
Instructions for use ✔
Certificates
Documentation
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ΜTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Jellyfish Video Bitrate Test Files -.mkv files for testing streaming video and playing multimedia.
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
MT7615 Wireless Driver Information 4.4.1.2 from Padavan
Information about capacitors in KN-1010 \ KN-1810 from Ilya Khrupalov
Bridge mode for the optical terminal Rostelecom from healer2001
An example of creating a directory using the command 'mkdir' in the console from enpa
Using Emoji in the name of the Access Point of the Keenetic router from enpa
Registering the MAC address of the host in the Home segment using the console from enpa
Adding the MAC address of the Wi-Fi client device to the white or black list. When will the setting return to WebUI?
Setting up selective routing via imageMaster TOR
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
TTL lock
Keenetic Recovery
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule:

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

OPKG packages:

IntelliQoS:
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Application to manage the router
Transmission Management Application
Firmware


The official version of KeeneticOS
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
  • Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.
The program for recovering firmware Keenetic DSL KN-2010.
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 25.05.19, 17:54
Reason for editing: Keenetic (Android) - beta version of the new application for managing routers Keenetic
enpa
Message#2
30.12.18, 00:23
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable firmware version2.14.C.0.0-4 from 12/26/2018for KN-2110

Component kit
base
easyconfig
storage
config-ap
corewireless
ntfs
ppp
config-client
fat
pppoe
usb
ydns
config-repeater
hfsplus
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
cifs
ddns
safedns
dlna
nathelper-ftp
transmission
ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
2.14.C.0.0-4

Corrections:

Fixed renewal of SSL certificates

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.14.C.0.0-4
2. Installby file upload.
3. Dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.14.C.0.0-4 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKN-2110_stable_2.14.C.0.0-4.zip(13.54 MB)

Mirror:
cloud.mail - v2.04-v2.14 Firmware Keenetic
yandex.disk - v2.04-v2.14 Firmware Keenetic
Picture
enpa
Message#3
12.02.19, 13:14
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Official beta firmware version2.15.B.0.0-1 of February 11, 2019for KN-2110

Component kit
base
easyconfig
storage
config-ap
corewireless
ntfs
ppp
config-client
fat
pppoe
usb
ydns
config-repeater
hfsplus
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
tsmb
ddns
safedns
dlna
nathelper-ftp
transmission
ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
2.15.B.0.0-1

Supported Models:

Keenetic Giga (KN-1010)
Keenetic Start (KN-1110)
Keenetic 4G (KN-1210)
Keenetic Lite (KN-1310)
Keenetic Omni (KN-1410)
Keenetic City (KN-1510)
Keenetic Air (KN-1610)
Keenetic Extra (KN-1710)
Keenetic Ultra (KN-1810)
Keenetic Viva (KN-1910)
Keenetic DSL (KN-2010)
Keenetic Duo (KN-2110)
Zyxel Keenetic Start II
Zyxel Keenetic Lite III rev.B
Zyxel Keenetic 4G III rev.B
Zyxel Keenetic Giga III
Zyxel Keenetic Ultra II
Zyxel Keenetic Air
Zyxel Keenetic Extra II

Beta version is the official release of updated components that have undergone internal testing and are at the stage of final debugging.

To install the beta version, we recommend updating the Internet Center from mobile devices via the My.Keenetic application or the web configurator.

New features and improvements:

The component "Wi-Fi system controller" has been added to automatically control access points connected via cable;
Implemented support for 802.11v WNM BTM (BSS Transition Management);
Fixed PMK-R1 key exchange problems in FT roaming;
Implemented traffic monitor for arbitrary registered devices;
Implemented ACMEv2 protocol and getting wildcard certificates for KeenDNS domain names;
A form for accepting an End-user License Agreement has been added to the Quick Setup Wizard;
Added support for new Keenetic mobile app;
The automatic connection mode ADSL / VDSL (models KN-2010, KN-2110) is implemented;
Added support for USB modems MTS 872FT, MTS 874FT, MTS 835FT (MF920T) (for models with USB port);
Additional modes: port 0 has been added to the segment settings (for Keenetic Giga III, Ultra II, Giga, Ultra and Viva);
Fixed 802.1p packet transmission with zero VLAN ID;
The implementation of the SMB / CIFS server has been changed from CIFS NQ to Tuxera SMB (for models with USB storage support):
- Support for durable filehandles (launch applications from a network drive, etc.);
- Support master browser function;
- Support for Windows Backup;
- Support for Apple Time Machine.

New features Zyxel Keenetic Plus DECT:

Added support for Panasonic KX-TG7175, Panasonic KX-TG8562, Panasonic KX-PRXA10;
The correct display of numbers with an extension set on CAT-iq 2 handsets is implemented;
Implemented limiting line selection through # in accordance with the rules of dialing;
Fixed problem when re-copying call history or phone book;
Fixed replacing the outgoing call number when the replacement rule contains T;
Fixed line selection through # when dialing one character at a time.

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.15.B.0.0-1
2. Installby file upload.
3. Check the work.

If after installing 2.15.B.0.0-1 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKN-2110_beta_2.15.B.0.0-1.zip(15.05 MB)

Mirror:
cloud.mail - v2.04-v2.15 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.15 (Test, Beta Firmware) All Keenetic
Picture


Post has been editedenpa - 12.02.19, 13:25
Cache1983
Message#4
20.02.19, 21:19
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 169
Check in: 16.11.13
Huawei P20 Pro CLT-L29

Reputation:-  4  +

Good day!

I am the owner of the device since the beginning of December. Faced with the fact that when using WI fi 2.4 speed is cut very much. I live in a private house, so there is a minimum of interference from my neighbors.
The connection speed drops to 6 Mb / s.

Connection speed 2.4
Attached Image


At the same time Wi fi 5 everything is normal.

Wi fi 5 connection speed
Attached Image




I reset the settings to the factory settings, experimented with the settings, but nothing has changed. Confused that the level of the signal Wi fi at 2.4

Wi fi 2.4 signal strength
Attached Image


below the signal level Wi fi 5, although from my point of view it should be the other way around.

Wi fi 5 signal strength
Attached Image


Accordingly, the speed of Internet access is cut on Wi fi 2.4 very significantly

Internet speed Wi fi 2.4
Attached Image


in comparison with Wi fi 5 GHz.

Internet speed Wi fi 5
Attached Image


.
There is a thought about the factory marriage. Please give advice that it is possible to do.

Post has been editedCache1983 - 20.02.19, 21:29
Reason for editing: Spoiler
enpa
Message#5
01.03.19, 23:29
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable firmware version2.15.C.0.0-0 dated February 28, 2019for KN-2110

Component kit
base
easyconfig
storage
config-ap
corewireless
ntfs
ppp
config-client
fat
pppoe
usb
ydns
config-repeater
hfsplus
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
cifs
ddns
safedns
dlna
nathelper-ftp
transmission
ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
2.15.C.0.0-0

New features and improvements:

The component "Wi-Fi System Controller" has been added to automatically control access points connected via cable;
Implemented 802.11v WNM BTM (BSS Transition Management) support for seamless Wi-Fi roaming;
Fixed PMK-R1 key exchange problems in FT roaming;
Implemented traffic monitor for arbitrary registered devices;
Implemented ACMEv2 protocol and getting wildcard certificates for KeenDNS domain names;
A form for accepting an End-user License Agreement has been added to the Quick Setup Wizard;
For DSL (KN-2010) and Duo (KN-2110) models, the ADSL / VDSL automatic connection mode is implemented;
Added support for USB modems MTS 872FT, MTS 874FT, MTS 835FT (MF920T) (for models with USB port);
Additional modes: port 0 has been added to the segment settings (for Keenetic Giga III, Ultra II, Giga, Ultra and Viva);
Fixed 802.1p packet transmission with zero VLAN ID;
Fixed counters for OpenVPN connections;
Fixed possible loss of settings for L2TP / IPsec and Virtual IP;
Added support for new Keenetic mobile application (beta testing);
Added support for Tuxera SMB SMB / CIFS server (beta testing) (for models with USB storage support).

Advantages of Tuxera SMB:

Support for Durable Filehandles (launch applications from a network drive, etc.);
Master Browser function support;
Support for Windows Backup;
Apple Time Machine support.

New features of Keenetic Plus DECT:

Added support for Panasonic KX-TG7175, KX-TG8562, KX-PRXA10, KX-TCD450, KX-TGA810, KX-TCA130, KX-TGC310, KX-TGA661, KX-TCA155, KX-TCA125, KX-TCA120; Gigaset 2000S, 3000C;
The correct display of numbers with an extension set on CAT-iq 2 handsets is implemented;
Implemented limiting line selection through # in accordance with the rules of dialing;
Fixed problem when re-copying call history or phone book;
Fixed replacing the outgoing call number when the replacement rule contains T;
Fixed line selection via # when dialing one character at a time;
Fixed problems with Yealink W52H;
Fixed problems with the work lines without registration;
Fixed errors when editing the number containing the dialing rule;
Fixed errors in reading CAT-iq base settings with 2 handsets;
Fixed display on the handset settings redirect incoming call timeout;
Fixed the phone book with a contact without a last name.

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.15.C.0.0-0
2. Installby file upload.
3. Check the work.

If after installing 2.15.C.0.0-0 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKN-2110_stable_2.15.C.0.0-0.zip(14.59 MB)

Mirror:
cloud.mail - v2.04-v2.15 Firmware Keenetic
yandex.disk - v2.04-v2.15 Firmware Keenetic
Picture
enpa
Message#6
03.04.19, 16:55
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable version of KeeneticOS2.15.C.3.0-0 dated 04/01/2019for KN-2110

Component kit
base
easyconfig
storage
config-ap
corewireless
ntfs
ppp
config-client
fat
pppoe
usb
ydns
config-repeater
hfsplus
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
cifs
ddns
safedns
dlna
nathelper-ftp
transmission
ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
2.15.C.3.0-0

Supported Models:

Keenetic Giga (KN-1010)
Keenetic Start (KN-1110)
Keenetic 4G (KN-1210)
Keenetic Lite (KN-1310)
Keenetic Omni (KN-1410)
Keenetic City (KN-1510)
Keenetic Air (KN-1610)
Keenetic Extra (KN-1710)
Keenetic Ultra (KN-1810)
Keenetic Viva (KN-1910)
Keenetic DSL (KN-2010)
Keenetic Duo (KN-2110)
Zyxel Keenetic Start II
Zyxel Keenetic Lite III rev.B
Zyxel Keenetic 4G III rev.B
Zyxel Keenetic Giga III
Zyxel Keenetic Ultra II
Zyxel Keenetic Air
Zyxel Keenetic Extra II

Corrections:

Wi-Fi: fixed a problem with connecting Apple and Samsung Galaxy S10 clients when FT and PMF are on;
MWS: fixed transfer of FT settings over the DS;
Web-interface: fixed bugs;
TSMB: Fixed __ntfs_error errors.

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.15.C.3.0-0
2. Installby file upload.
3. Check the work.

If after installing 2.15.C.3.0-0 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

NDM HW ID Decryption
Lite KN-2110-01RU KN-2110

Tuxera TSMB
Tuxera SMBis a high-performance replacement for Samba and other open source SMB / CIFS servers. Provides support for the Microsoft Server Message Block (SMB) protocol.

Advantages of Tuxera SMB:

Support for Durable Filehandles (launch applications from a network drive, etc.);
Master Browser function support;
Support for Windows Backup;
Apple Time Machine support.

Attached fileKN-2110_stable_2.15.C.3.0-0.zip(14.59 MB)

Mirror:
cloud.mail - v2.04-v2.15 Firmware Keenetic
yandex.disk - v2.04-v2.15 Firmware Keenetic
Picture
enpa
Message#7
22.05.19, 19:00
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable version of KeeneticOS2.15.C.4.0-1 from 05/16/2019for KN-2110

Component kit
base
easyconfig
storage
config-ap
corewireless
ntfs
ppp
config-client
fat
pppoe
usb
ydns
config-repeater
hfsplus
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
cifs
ddns
safedns
dlna
nathelper-ftp
transmission
ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
2.15.C.4.0-1

Supported Models:

Keenetic Giga (KN-1010)
Keenetic Start (KN-1110)
Keenetic 4G (KN-1210)
Keenetic Lite (KN-1310)
Keenetic Omni (KN-1410)
Keenetic City (KN-1510)
Keenetic Air (KN-1610)
Keenetic Extra (KN-1710)
Keenetic Ultra (KN-1810)
Keenetic Viva (KN-1910)
Keenetic DSL (KN-2010)
Keenetic Duo (KN-2110)
Zyxel Keenetic Start II
Zyxel Keenetic Lite III rev.B
Zyxel Keenetic 4G III rev.B
Zyxel Keenetic Giga III
Zyxel Keenetic Ultra II
Zyxel Keenetic Air
Zyxel Keenetic Extra II

Corrections:

Fixed memory allocation problems with DLNA and Transmission;
Fixed traffic counting on hosts in the case of a TV port for Giga III, Ultra II;
Fixed traffic count by hosts in VDSL mode for DSL and Duo;
Wi-Fi: fixed re-association after FT-transfer;
TNTFS: fixed display of icons in file names;
DHCP Relay: added the ability to set any IP interface as a WAN;
Keenetic Plus DECT: Added support for the Panasonic KX-TGA250 handset.

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.15.C.4.0-1
2. Installby file upload.
3. Check the work.

If after installing 2.15.C.4.0-1 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

NDM HW ID Decryption
Lite KN-2110-01RU KN-2110

Tuxera TSMB
Tuxera SMBis a high-performance replacement for Samba and other open source SMB / CIFS servers. Provides support for the Microsoft Server Message Block (SMB) protocol.

Advantages of Tuxera SMB:

Support for Durable Filehandles (launch applications from a network drive, etc.);
Master Browser function support;
Support for Windows Backup;
Apple Time Machine support.

Attached fileKN-2110_stable_2.15.C.4.0-1.zip(14.56 MB)

Mirror:
cloud.mail - v2.04-v2.15 Firmware Keenetic
yandex.disk - v2.04-v2.15 Firmware Keenetic
Picture



 mobile version    Now: 05/29/19, 05:13