Tenda AC11 - discussion [V02.03.01.32_CN] | [wifirouter]: 300Mb \ s - 867Mb \ s + 4x1Gb | not



Rep: (52)
Tenda ac11 [V02.03.01.32_CN] - discussion
wifirouter: 2.4GHz (300Mbit \ s) - 5GHz (867Mbit \ s) + 4 • 1Gbit \ s | USB: no

Attached Image

The forum decided to post images under the spoiler

Description
Router Chinese company Tenda. The manufacturer claims 1 GHz processor (realtek), 128 MB of RAM, 1 wan + 3 lan ports supporting up to 1000 Mb / s, wi-fi frequencies of 2.4 GHz and 5 GHz.
It differs from the AC10 with increased WiFi transmission power and five antennas.
AC11, different AC10 set of LAN controllers. In AC11 there are D20601 G + DG3602 G + D20601 G.
And in AC10 there are DG3602 G + DG3602 G). In this regard, there are no guarantees about the compatibility of the firmware AC11 and AC10, especially since the AC11 so far exists only in Chinese version with a 2 MB 25Q16CSIG chip. (although on a bunch of sources, it is argued that it has 8 GB. ROM)
Specifications
Standart IEEE802.3, IEEE802.3u
Interface 1 * 10/100 / 1000Mbps WAN port
3 * 10/100 / 1000Mbps LAN ports
Antenna 6dBi external dual-frequency omnidirectional antenna * 5
WPS / Reset buttons * 1 button
WiFi Button * 1
Adapter Input : AC 200-240V — 50 / 60Hz
Output пјљ DC 12V 1A
LED indicators 1 * WAN, 1 * LAN, 1 * Wi-Fi, 1 * SYS
Dimensions 220 * 141.5 * 49mm
Wireless IEEE 802.11ac wave2 / a / n 5GHz
IEEE 802.11b / g / n 2.4GHz standards
5GHz transmission speeds: 867Mbps
2.4GHz: 300Mbps
Frequencies 2.4GHz & 5GHz
Basic functions Supports SSID / Broadcast and Hiding
MU-MIMO support
Beamforming support
Support signal strength adjustment
Wireless Security WPA-PSK / WPA2-PSK, WPA / WPA2
Wireless encryption off and on
WPS Fast and Secure Connection
Type Internet Connections PPPoE, Dynamic IP, Static IP
Support automatic access detection
Support for account password migration
Operation Modes Wireless Routing Mode
AP mode
Wireless Relay Mode (Client + AP, WISP)
DHCP Server DHCP Server
DHCP Client List
DHCP Reservation
Virtual Server Port Forwarding
DMZ host PC
UPnP
Security Client Filtering (Blacklist and Whitelist Mode)
Parental control (black and white network support control)
Remote control (remote access by QR code)
Firewall Anti PING WAN - Disable / Enable
DDNS support for DynDNS, 88ip, Orey.com,
support DynDNS, No-ip, 3322.org, Oray.com, 88ip (ж”ЇжЊЃ DynDNS, 88ip, иЉ±з”џ еЈі)
Special Functions Dual Frequency (еЏЊйў‘ еђ€дёЂ еЉџиѓЅ)
Automatic migration technology using a broadband account
WiFi Timer
Intelligent energy saving
Switch panel?
Tenda App Local and Remote Control
Other Bandwidth Management
Guest network
IPTV
MAC Address Cloning
System log
Backup and restore configuration
Online update (online check for new versions)
Local update.
Operating Temperature: 0 в„ѓ ~ 40 в„ѓ
Storage temperature: -40 в„ѓ ~ 70 в„ѓ
Humidity Operating Humidity: 10% ~ 90% RH non-condensing
Storage Humidity: 5% ~ 90% RH non-condensing
The factory default setting Address Bar: tendawifi.com orhttp://192.168.0.1
Certificates 3C
AC1200 Delivery Package Gigabit 11ac * Dual Band Wireless Router
Power Adapter * 1
Installation Guide * 1
Useful information
The manufacturer's page is only on the Chinese site:https://www.tenda.com.cn/product/AC11.html
The documentation is most similar to the AC10, but there are some differences in the specification.
The data are given by the Chinese original namely AC11. It is possible that the documentation has not yet been completely settled, because The device is quite new.
From Aliexpress came with Chinese firmware installed in English. Built-in English and two Chinese interface options.
Support for branded smart applications Tenda WiFi is possible only in the router mode, but not the AP (the Chinese write that they are working on it). Default router address:http://tendawifi.comorhttp://192.168.0.1
According to the ssl protocol (https: // ...)does not respond.

Theoretically, it is possible to replace the ROM chip with 8 or 16 MB (25Q64CSIG or 25Q128CSIG).
Wishing to replace the chip:The board in the chip area is very delicate !!! When watering there is a significant risk of damaging the two landing pads (from the CPU) and the tracks leading to them !!!
P.S. The router and without this chip can work, but not as a router, but simply as a switch ...
Access to the contents of the chip is possible through the UART, which is available on the board, but without pins.
Maybe someone will need a full reset:https: //www.router-res...set-manuals/Tenda/AC11
The AC10 and AC11 also have different CPU radiators: the AC11 radiator is noticeably smaller, but under the board is a large aluminum plate, also for cooling, which the AC10 does not have.http://www.acwifi.net/5792.html
P.S. I wonder what kind of analog it has (in the subject AC18 the analog is indicated).
Topic Curator: Topic with no curator


Post has been editedJipaq - 23.02.19, 01:15
Reason for editing: Specifications for the filling have been clarified.



Rep: (78)
* Jipaq,
please take screenshots of the menu items of the web muzzle settings in the English version, you can understand what is and what is not



Rep: (52)
Status Section
Attached Image


Internet settings
Attached Image


Wireless settings
Attached Image


Parental control.
Attached Image


Schedule settings
Attached Image


Advanced settings
Attached Image


Administration
Attached Image



Post has been editedJipaq - 09.12.18, 18:36



Rep: (78)
* Jipaq, thanks, I plan to use it only as an access point plus a few more lan ports I miss.



Rep: (0)
also ordered myself such a home, have not arrived yet



Rep: (78)
* maxxx33, I'll get it tomorrow, it turned out delivery in 2 weeks ....
Attached Image



Post has been editedDimmen2 - 19.12.18, 22:18



Rep: (78)
Today I received, without a box in an inflatable mattress, packed well and everything is whole.
The settings are simple, works well, the signal is stronger than on the Asus RT-N18U.
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image



Attached images
Attached Image
Attached Image


Post has been editedDimmen2 - 21.12.18, 14:02



Rep: (52)
I tried to find analogs of the router ...
Exact, probably not. But there is a similar ZyXEL NBG6615 - for comparison specifications:
https://wikidevi.com/wiki/Tenda_AC11
https://wikidevi.com/wiki/ZyXEL_NBG6615- not everything is known here ...



Rep: (78)
* Jipaq, everything is stable and very good
Attached Image




Rep: (52)
* Dimmen2 , It is good that it is good. I'm good too! But the possibility of stirring up a VPN would not hurt ...

Post has been editedJipaq - 31.12.18, 11:28



Rep: (48)
Hi tell meit's him ?
: blush:
Jipaq @ 07.12.18, 20:16*
AC1200 Delivery Package Gigabit 11ac * Dual Band Wireless Router
Power Adapter * 1
Installation Guide * 1


Post has been editedUDODEZ - 08.01.19, 22:46



Rep: (52)
* UDODEZ No, not him. Tenda AC11 has 5 antennas. And 11ac (WiFi standard 5 GHz) is not the same as AC11. https://ru.m.wikipedia.org/wiki/IEEE_802.11ac

Post has been editedJipaq - 12.01.19, 11:32



Rep: (52)
PCB Photo Tenda AC11
PCB AC11
Attached Image



Rep: (78)
* Jipaq, the photo does not make out marking cp ...



Rep: (52)
* Dimmen2,
CPU under the radiator.
http://www.acwifi.net/…s/2018/11/SAM_3806.jpg
https://wikidevi.com/wiki/Tenda_AC11
https://wikidevi.com/wiki/Tenda_AC10
http://www.acwifi.net/5792.html
From a Chinese source:
[Tenda AC11, the shape is exactly the same as that of the AC10, just an antenna in the middle of the back, only 5 antennas.]
[The front of the Tenda AC11 motherboard is shown below. The heatsink on the processor is much less airy than the AC10. Only double-sided glue is used. The radiator is removed with little effort. Unlike AC10, electric ferrochrome is required.]
[On the back of the motherboard there is a large aluminum case for dissipating heat, which is absent in the AC10.] - !!! Perhaps the reason for the small radiator in AC11 ???

Post has been editedJipaq - 15.01.19, 15:30



Rep: (0)
Has anyone tried to connect to the repeater-repeater mode and TP, does it work?



Rep: (52)
I tried to log into AC11 via telnet according to the instructions.
Problems with Tenda routers (Post Vet_AL1982 # 68542690)
VPS56Problems with Tenda routers (Post VPS56 # 81312200)
NOT RIDED !!! Apparently in a small (2GB) flash drive, telnet support was not stuck.
So the dump can be removed only through the UART (there are contacts on the board, but without a connector) or with the help of the programmer.
P.S. After the failure, just in case, did the address of the computer following the router (192.168.0.2) - did not help.



Rep: (14)
Guys as a router for the house will go



Rep: (0)
* maxis0803 depending on which house



Rep: (14)
* Dimon161rnd Yes, it’s not a medium-sized flat. I have a tenta, but I want to update something rather weak.



Rep: (0)
* maxis0803 , through the wall, four bricks are already weak compared to AC18.
in the mode of the repeater in conjunction three AC11 with AC18 normal flight


Full version    

Help     rules

Now: 09/03/19, 21:56