[X]Assistant

[Digins]

Blackview BV9500 / 9500 Pro - Firmware (OS 8.1)
Blackview BV9500 / 9500 Pro
Discussion пїЅ | Purchase пїЅ | Firmware пїЅ

Drivers and Utilities

SP Flash Tool download

A program for flashing and reading ROM.
WwR MTKThe program works with ROM files (read from the device usingSP Flash Tool), backup.
ADB driver for WindowsDriver_Auto_Installer_v5.1453.03.zip(33.18 MB)

SP Flash Tool DriverSP_Drivers_v2.0_signed.zip(8.39 MB)

MauiMETA work with the radio module MTK (modem, nvram) (NVRAM editor) IMEI Repair

Official 9500 firmware

Official ROM Download-Links is still empty (11/30/2018)
Firmware for USB flash drive 2019032019_s32v63c2k_jk non PRO version
9500_2018102619_s32v63c2k_jk_for_Flashtoolon Mega
on other resources will be added later

can be downloaded from:
ftp at 188.234.245.173
Anonymous or
with login / passsavagemessiahzine.com

MT6763_Android_scatter.txt(14.58 KB)

Official 9500 firmwarePro

Official firmware for PRO version_2018092919_s32v63c2k_jk_pro mega
Blackview_BV9500_Pro_MT6763_20180829_8.1.0I-drive

Explanations in the differences of firmware.

can be downloaded from:

ftp at 188.234.245.173
Anonymous or
with login / passsavagemessiahzine.com

MT6763_Android_scatter-PRO.txt(14.59 KB)

Unofficial firmware

Firmware based on the flow "Lomaster_ROM_v1.0" for the smartphone bv9500 (test) LomasterROM.rar

can be downloaded from:
ftp at 188.234.245.173
Anonymous or
with login / passsavagemessiahzine.com

TWRP, ROOT, Other

stock boot & recovery 9500 pro BV9500-PRO-stock_boot-recovery_201810829_s32v63c2k.zip (23.45 MB)

stock boot & recovery 9500BV9500-stock_boot-recovery_2018102619_s32v63c2k_.zip(23.46 MB)


TWRP 3.2.3 for Blackview BV9500PRO Blackview BV9500 / 9500 Pro - Firmware 8.1 (Digins Fast # 79582113) post immediately under the cap
TWRP 3.2.3 for Blackview BV9500
At the moment, root can only be obtained by installing a SuperSU or Magisk patch from TWRP
themeSuperSU
themeMagisk Recommended

Instructions

DO NOT sew in format / download mode if this is not absolutely necessary and you can work with NVRAM!
Full firmware is in modeFirmware upgrade
The firmware of individual partitions (TWRP, boot ...) is in modeDownload
How to find out the current firmware version the apparatus is different, the principle is the same
Complete instructions for flashing the device flashlight The device is different, the essence is one.

Here, for example, my little old instructions :-)

miscellanea

For all questions of filling and updating the caps,
The topic curator is always happy to help you.Digins . (Contact in QMS ).

Post has been editedDigins - 10.04.19, 09:40

Reason for editing: Firmware 2019032019

[Lomaster_Serg]

Stock based firmware"Lomaster_ROM_v1.0"for smartphonebv9500(test)

Description

The stock firmware v1.0_20180814 was taken as a basis, the system garbage was cleared a bit (mainly play-google trash); the music player was replaced by a SONY player with Google disc support; ROOT-magisk v17.1 from the start (google Pay works!) (download directly to the desktop). Replaced the stock launcher on the Nova,) also added Tesla (notification badges on the application icons)
large network mode icons are disabled in statusbar. translation into Russian locale is added .. And maybe something else I don’t remember already ..
Encryption of the data and TWRP section is already disabled in the firmware ..
... we test whom not lazy and do not judge strictly
In the future it is possible, if there is interest in the firmware, I will update and add as many interesting features as possible.

a bit of information "for dummies"

one). When you first start the android on the desktop for some reason, the clock widget does not start, just delete it and add again
2). When adding email clients and instant messengers, we activate the notification badges for applications (go to the nova / badges / tesla settings)
and there we put the sliders on the right applications
3). The default battery icon is shaggy, you can change the icon by going to settings / battery / battery style.
there you can load any of the 1000+ icons and install it in the statusbar, you can also adjust the size of the icon
4). The Internet speed is integrated into the statusbar and it can not be disabled, alas! maybe create a patch to disable, later ...
To disable network speed, use the application from this post:Blackview BV8000 Pro - Firmware (Post Lomaster_Serg # 83064408)
5). The firmware is not official! According to this, the "wireless update" is cut from it, with the presence of root rights and a bunch of changes, the firmware simply can not be physically updated officially by air

Download:

https://mega.nz/#!YUMn...oFMmLKJaHF0ji2Wibz92Uk
Attention!when packing archive the format is usedRAR5according to this update your archivers (which is not unpacked)

I also want to remind everyone that I’m not imposing my firmware on anyone, I do a lot and adjust to my own taste, if someone doesn’t like something, we just pass by without too much tautology .. well, don’t forget that I’m not an engineer or even a wizard, Most of your wishes and suggestions, I can not overpower me .. I, too, have a lot of things to hunt, but there is little that happens ..

Installation:

Install using a flashlight, unpack the folder with the firmware, start the flash unit, open the scatter file in it (the preloader daw can be removed)
no additional settings in the USB flash drive are no longer needed, all by default
click "download" nexton offSmart we press the "plus" button and connect it to the computer with a cord, when the firmware process goes, the button can be released

Post has been editedLomaster_Serg - 16.03.19, 08:42

[Digins]

TWRP 3.2.3 for BlackviewBV9500Pro
core basedBV9500Pro_V1.0_20180829 recovery-9500PRO-TWRP.img (17.43 MB)

core basedBV9500Pro_V1.0_20180929 recovery-9500PRO-TWRP_20180929.img (17.43 MB)

(9500 should work)
Check, report the result.
Authorship TWRP belongsJemmini
I patched the new kernel and rebuilt the recovery for the touchscreen.

Getting Root:

1. Download TWRP andCreate backup
   
2. Download the OS and install MagiskManager .... apkMagiskManager-v6.0.2.r1-2018102115.apk(1.92 MB)
   
   
3. Download TWRP and install Magisk .... zipMagisk-v17.4.r1-2018102115.zip(4.02 MB)
   
   
4. Install SafetyNet module .... zipPetnoire's_SafetyNet_Spoofer.zip(15.87 KB)
   

To remove Magisk:

1. Remove MagiskManager app .... apk
   
2. Download TWRP and install Magisk-uninstaller .... zipMagisk-uninstaller-20180921.zip(2.26 MB)
   

Post has been editedDigins - 18.12.18, 13:59

Reason for editing: TWRP 20180929

[Digins]

2


Post has been editedDigins - 30.11.18, 16:10

[Digins]

3


Post has been editedDigins - 30.11.18, 16:11

[Vasilius_v]

Root received the rights without using TWRP, used the Flash Tool. Installed Magisk.

[Digins]

Those. just patched the patched boot from version 9500 (not PRO) inPRO unit ?

[Vasilius_v]

Digins, first installed the program, and then flashed it; there was a post-instruction in the main topic. My version is not Pro, in the profile you can select only the device in the Pro version.

[Lomaster_Serg]

Digins,
There are few who have "Pro" And even fewer people with root rights ...
But there are posts with statements by users where they claim that TWRP works on the Pro version
I found one through searchBlackview BV9500 / 9500 Pro- Discussion (Post BoaConstrictor-FENIX # 78647370)
Blackview BV9500 / 9500 Pro- Discussion (Post by F @ stor # 79273910)
shorter need to look for, there are posts ..

Sewing immediately a patched boot from my post is stupid for having TWRP. first, even in the regular version, updates appeared with an updated kernel
Well, secondly, on the Pro version, the kernel is clearly different, and even if it is fully compatible, it can still affect something in the work ... it’s better to use the native kernel from the specific firmware that is worth it. because with the advent of updates the kernel is often ruled
(according to this I think, so that there is no confusion, I need to remove the post with the patched boot (!??) .. because the old one is used there.
The post was created at the time when TWRP was not in nature)

Shl. Add a link to the topic "Firmware" in the header of the topic "discussion" and then "purchase" appeared and the firmware is not in the topic of discussions

Post has been editedLomaster_Serg - 01.12.18, 08:59

[Digins]

patched boot, let it still hang a little, later we will remove

Post has been editedDigins - 11.12.18, 09:04

[rostoffcity]

I can not understand! Put the firewood, downloaded the flash tool, downloaded the file scanner, downloaded the TV file, but it does not work!

Attached images

[Digins]

rostoffcity
Scatters have pro and nepro differ
Scatter in the same folder with the recovery?
What is the firmware in the body?
about / not?

Post has been editedDigins - 01.12.18, 18:44

[rostoffcity]

Digins,

Posted 12/01/2018 20:40:

Digins, and how to make a backup? I had before that bv6000 everything was much easier there! In general, I need a root in order to restore a photo or at least part of them is not decisive, because the phone didn’t initially have a third party gallery downloaded, open folders for duplication, looked at the properties, they are different, well, I deleted one, it turned out to be wrong! Stupidity is stupidity! :)

Attached images

[Digins]

[email protected], 22:36

How to make a backup?

Top spoiler in the cap.
And the scatter must be used fromHISrevisions of the apparatus!

[Vent44]

Apparently they were mistaken, because for a long time there was no topic curator, in the old manner he wrote.

I received 116 gigs of RUMA on an external disk and my preloader ... BUT, I can not get the scanner Native I want.

Did this instruction:WwR MTK
in the last step, only one button is active to assemble the firmware and scanner. The neighboring button (only the scatter) (I'm talking about the VVR program) is NOT ACTIVE in the trash ... Well, I’m OK to collect collects all the rules I get. 4.8 gig firmware in it, recovery and other files, but there is NO scatter .... how to get it .... with a semiautomatic machine I don’t understand in the description what I want and how to read, and so on ...

(the instruction point is not clear: It is necessary to perform the conversion of the RESERVED sections with their starting addresses to the necessary ones, from the end, and not from the beginning.
That is, if the starting address is specified as 0xFFFF0084, then this is from the end of the ROM file. That is, FFFF is a minus type. In order to calculate the negative value, you need to know and specify the full amount of memory.
Now it is calculated automatically, based on the PGPT section. In the PMT section, this information is not available, so you have to manually enter the full amount of memory based on the SP Flash Tool information. (ie see Figure 207). HOW TO DEFINE ??? An example of what you can do ...

Model pro. Collection: BV9500pro_V1.0_20180827_20180929-1845

Post has been editedVentus44 - 04.12.18, 03:38

[F @ stor]

Digins,Does TWRP on 9500 Pro work encryption?

Post has been editedF @ stor - 04.12.18, 03:55

Reason for editing: Pro forgot to specify.

[Lomaster_Serg]

Ventus44, in the header, a link to a useful topic is simply added .. but this does not mean that you need to organize an offtopic on this topic here.
This topic is not a "backup school"
The wwr application is discussed in the appropriate topic! What does it have answers to all your questions ... you just need to not be lazy to read

Post has been editedLomaster_Serg - 04.12.18, 06:54

[Lomaster_Serg]

F @ stor @ 4.12.18, 2:54

Does TWRP on 9500 Pro work encryption?

Not exactly the question is correct ... do you mean did the tvrp learn to work with encrypted data? Well, firstly, this is just a re-port from the normal model ..
Secondly, and where did you meet such twrp in nature ???

[F @ stor]

Lomaster_Serg @ 12/04/2018, 11:23

Secondly, and where did you meet such twrp in nature ???

Yes, I saw on Googlephones, on some Xaomi. I think there are still models on which it works correctly. Initially, even this TWRP has this functionality, but does not work properly. The password after all asks. And before this functionality was added, he generally saw the section as unformatted and did not ask for any password. In the description of TWRP, this functionality is also described.

Lomaster_Serg @ 12/04/2018, 11:23

Well, firstly, this is just a re-port from the normal model

That was the question.

[Lomaster_Serg]

F @ storWell, the fact that the password asks for something encrypted is normal ..
But you must understand that the password is not appropriate here ..
TWRP needs to be taught to define the encryption method itself as well as to learn to understand it ...
These methods are a pond ... it will never be universal .. IMHO
So we don’t have such a twrp ... nobody has to do it

[Digins]

Ventus44,
Your desire to merge a full backup from your device is very commendable!
Make and compare with the firmware from the cap, it will be a useful experience. Make a competently post, I will definitely add it to the cap, I think many will be interested.
But to discuss WwR MTK in this topic is not worth it, because offtopic.