guys and tell me a link to the current version for the MAGIC stabilki from "XIAOMI EU"

microb063 ,
Р’В® Magisk - The Universal Systemless Interface (Post Anais10 # 53515726)
Perhaps it ask !?

Hello. In general using Telliyev.Elli user could restore imei on the phone. If you are interested in detailed instructions, can all put together with the files that are used. The same method is changing imei phone.

Smith_namig ,
It not just interested, but very important infa, which must be in the header.

The device was unlocked? Method implies the presence of Ruth?

Keksik1980 ,
Unlocked, Ruth rights must be. After reduction (change) imei, you can sew through miflesh with boot lock, all stored permanently.
In the evening, I'll write the instructions.

Here I am about the same, and I dragged the device zalochenny without Ruth and without imeev and communication, sought the path of recovery, so far without result. : Rolleyes:
Here's what to do with this phone to him so ushatat.Ya shocked: unsure:

Post has been editedKeksik1980 - 09.09.19, 18:04

Keksik1980 ,
There is not likely to imeyah case. Communication module in 6astroykah shows? Probably I fell off the modem.

Recovery (Editing) IMEI !!!

The authorsSmith_namigandTelliyev.Elli

1. The phone must be unlocked bootloader and set Magisk.
2. Becoming rekaveri (I got only this rekaveri) is below.
3. To make a backup efs section, preferably on a memory card.
4. Enter the rekaveri, then the terminal and enter the command below that.


5. Reboot your phone, install the applicationQCOMDiagMode.apkactivate it DIAG mode, allow Ruth to add the application.
6. ProgramWriteDualIMEI (W + G_eMMC)prescribe the necessary IMEI.
7. RunQPST Configuration, We see that the phone is defined, and select from the top menuStart Clients-Software Downloadin the window that opens, selectRestore
8. On the contraryxQCNpushbrowsechoose a fileHMnote6pro2.qcnof the attached file below. When you select will not be able to detect this because the file Explorer will look for a file extensionxqcnyou need the right change at the bottom ofqcn.
9. Once selected, we put a checkmarkuse filterand be sure to choose from the following optionsRFpress start and wait for recovery.
10. Once the program will tell you that everything is done, reboot your phone, and enjoy the restored or modified IMEI.
P.S. Thanks to the userTelliyev.Elli For help, and patience. The idea of ​​it. I just made a statement, and all described in detail.


WriteDualIMEI (W + G_eMMC) .exe(80 KB)
Xiaomi Redmi Note 6 Pro QCN.rar(111.42 KB)
QCOMDiagMode.apk(1.58 MB)
recovery.img(28.04 MB)
QPST.2.7.472_2018.zip(36.29 MB)


Post has been editedSmith_namig - 26.09.19, 19:27

So yes, it is stitched, and the settings one hell communication module unknown.
Imei, mac, meig, fsn, psn - unknown, ie they do not like something tak.Polny rally, blade.

He flashed bodies slung mitransferom it vvse from the previous body. I glanced at the screen. Something with a resolution scale Xs ... ..
Give pliz staff build.prop. compare at least ...

Keksik1980 ,
Well this is a problem on the hardware level. Chances are dropped or marriage.

Most likely yes, and meant people Well guerrillas did not drop, neither of which did not do very well there, mostly: rolleyes:

it's all you can do with the computer it is enough to set the minimal adb and fastboot,
run it, and then send the commands one by one and adb shell su.

IgoRock1986 ,
Only through rekaveri. From a computer not roll. Do only as instructed.

I want to ask the PC sees the mobile phone at any time, but apart from fastboot (shining android), I want to put the driver through a program, but says that everything is normal set (Win10). Phone is unlocked, it is worth Masik.

Post has been editedkiruwkin - 10.09.19, 18:09

After updating the firmware flies twpr possible as a back without a PC

SergeyKons,
If there is Ruth.

Bratella ,
You can set how popodrobney- tvrp without a PC in the presence of Ruth rights? : Blush:

Somebody please throw off the patched Booth at restoring Ruth firmware version 10.3.5