Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Tele2 Midi LTE - Firmware |
Message#1 06.11.18, 01:28 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | Tele2 Midi LTE - Firmware Description | Discussion � | Firmware � Drivers and Utilities Official firmware Unofficial firmware Recovery Instructions miscellanea Download Logo Patch to increase the volume on firmware without engineering menufromoddmsz Service and warranty service Elefonov Settings for VoLTE Tele2 Russia (as long as the job is announced only in the Moscow region) Smartphone power consumption Unlock from Tele2 Without unlock, works with SIMs of virtual operators on Tele2 network (TTC, Rostelecom, Sberbank, etc.) Unlock 3G / 4G for sim2 3G / 4G unlock report for sim2 Disable unlock SIM1 firmware CleanRom Unlocking the first SIM card from Tele2 Engineering menu Entry code in the engineering menu * # * # 3646633 # * # * Phone verification menu * # * # 4636 # * # * Microphone settings in the engineer (by default). To improve hearing, we expose 210 everywhere. There is no curator in the subject. For filling caps contact the topic creator -DarkShaperin QMS or tomoderatorssection through a buttonunder the messages to which you want to add links. Post has been editeddestroyer71 - 06.03.19, 11:35 Reason for editing: Logo download |
Message#2 11.11.18, 17:06 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | CrDroid v3.8.6 Android 7.1.2 kernel 3.18.19 x64 Description CrDroid v3.8.6 Android 7.1.2 Kernel 3.18.19 x64 There are no GApps, Root rights are sewn (In Settings, the "For Developers" item). A source Bugs
Thanks Installation We go in TWRP Recovery ->Wipe ->Advanced wipe ->Cleaning ->Selective cleaning Select ticks: -Dalvik \ ART Cache -System -Cache -Data Next, Instal (Installation) select our SD card and the firmware on it, confirm, wait. Firmware installation time: no longer than 10 minutes Download Post has been editedDarkShaper - 06.12.18, 21:13 -------------------- Meizu m5c FlymeOS 6.0.2.4G x64 |
Message#3 11.11.18, 17:40 | |
A long time here [offline] Group: Friendssavagemessiahzine.com Messages 2633 Check in: 04.04.09 Irbis SP58 Reputation: 365 | DarkShaper, Tele2 Midi LTE 1.1 V01.02.20170420 is also official, the last one Tele2 Midi LTE - Discussion (Post oddmsz # 64483878) |
Message#4 11.11.18, 17:46 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | |
Message#5 11.11.18, 21:49 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | LineageOS 14.1 Android 7.1.2 kernel 3.18.19 x64 Description LineageOS 14.1 Android 7.1.2 Kernel 3.18.19 x64 There are no GApps, Root rights are sewn (In Settings, the "For Developers" item). Security patch from March 5, 2018 A source Bugs
Thanks fender520- for the source Installation We go in TWRP Recovery ->Wipe ->Advanced wipe ->Cleaning ->Selective cleaning Select ticks: -Dalvik \ ART Cache -System -Cache -Data Next, Instal (Installation) select our SD card and the firmware on it, confirm, wait. Download Post has been editedDarkShaper - 11.11.18, 21:58 -------------------- Meizu m5c FlymeOS 6.0.2.4G x64 |
Message#6 13.11.18, 14:07 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 668 Check in: 20.12.13 Xiaomi Redmi 2 Reputation: 43 | The bug with the camera and bluetooth disappeared? |
Message#7 13.11.18, 14:15 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | |
Message#8 13.11.18, 17:27 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | Instructions for firmware via SP Flash Tool Instruction 1)We make all the necessary preparations. We charge the phone, but while it is charging, we downloadSP Flash Tool. ATspoilerWe find the current version of the flash driver. Download, unpack in the right place. (It is desirable that there are no Russian letters and symbols in the path to the folder with the SP Flash Tool.) 2)Downloadingdriversand unpack, install: Go to the folder with the unpacked drivers, connectoffphone to computer and run Install.batas administrator. The command line opens, it will say: Install succes ===== Operation Succeeded ===== File Closed. Installing Driver ... Driver Install Done. To continue, press any key. . . So the drivers are installed. And if it will be like this: there are no matching devices in the device tree ===== Operation Succeeded ===== File Closed. Installing Driver ... Driver Install Done. To continue, press any key. . . P.S.Installation needs to be made in an interval between two sound signals of Windows. Between them about 2-3 seconds. 3)Download and unpack the necessary firmwarefor SP Flash Toolnext to the SP Flash Tool. If the archive has the file MT6737M_Android_scatter.txt, then this is the desired firmware. 4) (Optional - replacing stock recovery with TWRP)Download any TWRP (recovery.img) and throw it with a replacement in the folder with the unpacked firmware. 5)Open the folder with the SP Flash Tool, runflash_tool.exe on behalf of the administrator.Opposite of the Scatter-loading File click the choose button and in the opened window go to the folder with the unpacked firmware and select the fileMT6737M_Android_scatter.txt. FURTHER, IMPORTANT STEPS GO. DO NOT MISS! 6) Open the tab "Readback" and click "Add", you will have a line, click on it 2 times, choose the path to save the file and enter the nameNVRAMNext, a window will open in which we enter these values: Start Address: 0x380000 Length: 0x500000 It should work as in the screenshot: 7) Click "OK" and disconnect the phone from the computer, if it was connected. Click "Read Back" and connect the switched off phone to the computer. Do not disconnect the phone from the computer until a window appears with a green check mark, after the appearance of this windowdisconnect the phone from the computer. We made a backup IMEI, which we will need in the future. WITHIN THE FOLLOWING STEPS, THE TELEPHONE CAN NOT BE TURNED ON !!! 8) Open the "Download" tab and tick everywhere, except preloader !!! Click "Download" and connect the switched off phone to the computer. After the firmware, all data on the phone will be deleted, so that all important files are saved on the computer !!! Again, waiting for a tick and disconnecting the phone from the computer, but turn it on againit is impossible !!! 9) We remove the tick everywhere, put a tick just opposite the preloader, open the tab "Format". Select "Manual Format Flash" and enter these values: Begin Address [HEX]: 0x380000 Format Length [HEX]: 0x500000 It will turn out as on the screen: 10) Click "Start" and connect the switched off phone to the computer. We are waiting for a tick and then disconnect the phone from the computer. 11) Now we need to write our IMEI to the phone. We press keys Ctrl + Alt + V, from above we press Window ->Write Memory. A menu appears in which, opposite the File Path, click on the blue folder and select our NVRAM file. Next, enter: Begin Address (HEX): 0x380000 Press the "Write Memory" button and connect the switched off phone to the computer, waiting for a tick. That's all. We can turn on the phone. After flashing the phone can be switched on for a long time. Post has been editedDarkShaper - 13.11.18, 17:28 -------------------- Meizu m5c FlymeOS 6.0.2.4G x64 |
Message#9 15.11.18, 17:52 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | dotOS Android 7.1.2 core 3.18.19 x64 Description dotOS Android 7.1.2 core 3.18.19 x64 No GApps, no Root rights (If needed, set SuperSU or Magisk). A source Bugs
Installation We go in TWRP Recovery ->Wipe ->Advanced wipe ->Cleaning ->Selective cleaning Select ticks: -Dalvik \ ART Cache -System -Cache -Data Next, Instal (Installation) select our SD card and the firmware on it, confirm, wait. Download -------------------- Meizu m5c FlymeOS 6.0.2.4G x64 |
Message#10 17.11.18, 17:59 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | AOKP Android 7.1.2 kernel 3.18.19 x64 Description AOKP Android 7.1.2 Kernel 3.18.19 x64 There are no GApps, Root rights are sewn (In Settings, the "For Developers" item). A source Bugs
Installation We go in TWRP Recovery ->Wipe ->Advanced wipe ->Cleaning ->Selective cleaning Select ticks: -Dalvik \ ART Cache -System -Cache -Data Next, Instal (Installation) select our SD card and the firmware on it, confirm, wait. Download -------------------- Meizu m5c FlymeOS 6.0.2.4G x64 |
Message#11 19.11.18, 09:24 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | MOKEE Android 7.1.2 kernel 3.18.19 x64 Description MOKEE Android 7.1.2 Kernel 3.18.19 x64 There are no GApps, Root rights are sewn (In Settings, the item "For Developers") + sewn Xposed and Substratum A source Bugs
Installation We go in TWRP Recovery ->Wipe ->Advanced wipe ->Cleaning ->Selective cleaning Select ticks: -Dalvik \ ART Cache -System -Cache -Data Next, Instal (Installation) select our SD card and the firmware on it, confirm, wait. Download -------------------- Meizu m5c FlymeOS 6.0.2.4G x64 |
Message#12 19.11.18, 10:01 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 668 Check in: 20.12.13 Xiaomi Redmi 2 Reputation: 43 | |
Message#13 19.11.18, 11:07 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | |
Message#14 20.11.18, 15:29 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 310 Check in: 08.10.11 Tele2 Maxi LTE Reputation: 3 | Why is the 2mp camera on the lineage, the same on other firmware? |
Message#15 20.11.18, 17:58 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | The quality of the camera is normal. For example, on MOKEE, the camera is generally 8 megapixel, and our camera is only 3 megapixel) Now the computer will be updated and then I can try to fix it. Post has been editedDarkShaper - 20.11.18, 17:58 -------------------- Meizu m5c FlymeOS 6.0.2.4G x64 |
Message#16 04.12.18, 12:32 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 668 Check in: 20.12.13 Xiaomi Redmi 2 Reputation: 43 | So ended the firmware |
Message#17 04.12.18, 12:42 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | |
Message#18 04.12.18, 16:47 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 668 Check in: 20.12.13 Xiaomi Redmi 2 Reputation: 43 | |
Message#19 04.12.18, 16:59 | |
い シ ェ イ パ ー [offline] Group: Friendssavagemessiahzine.com Messages 2205 Check in: 23.06.17 Meizu m5c Reputation: 641 | wnl2527sAndroid GO is kind of like normal Android 8.0.0 / 8.1.0, for 8.0.0 and 8.1.0 you need 3.18.79 custom kernel, we don’t have it. I wanted to compile it from source, but this is almost impossible, since Nowhere is the source code of our stock kernel, and without these sources in any way .. -------------------- Meizu m5c FlymeOS 6.0.2.4G x64 |
Message#20 06.12.18, 09:11 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 668 Check in: 20.12.13 Xiaomi Redmi 2 Reputation: 43 | DarkShaperDoes volte work on your firmware? 7.1.2 ?? Miui can generally stir up Post has been editedwnl2527s - 06.12.18, 13:11 |
Message#21 06.12.18, 17:21 | |
Experienced [offline] Group: Curators Messages 583 Check in: 12.09.12 Xiaomi Mi 5S 3/64 Reputation: 146 | Installed CR Droid. The firmware went for a very long time (7 minutes), compared with its other phones. I thought something was wrong, it turns out everything is fine. Can this add this information to a post with firmware for example? |
mobile version | Now: 05/20/19 06:03 |